Thank you for your response and support!!!! Please do share !!!! Marine Engineering hub aim is to bring all our marine personnel to this platform so that we can learn and grow up together!!!!
Thank you for your response and suggestions!!! Sure will make video regarding CO2 and deck foam fire fighting system!!!! Till then please watch my other video !!!! And please do share with your friends !!!
In sprinkler system, when the freshwater tank level becomes low level, then sea water pump gives supply automatically. In this system what happens if tank level becomes empty while fighting fire?
Thank you Salman for your response and support!!! Please do share this post on Facebook and whatsapp status!!!! Marine Engineering hub aim is to bring all our marine personnel to this platform so that we can learn and grow up together!!!!
Thank you Harpreet !!!!! if you like the video please share on your facebook and whatsapp account. Marine Engineering Hub aim is to bring all out marine personnel to this platform so that we can learn and grow together
Thank you for your support !! Please share the video with your friends!!! My aim is to bring all my marine friends to this platform where we can exchange knowledge.
In order to check it operation we have to activate both smoke and flame detector alarm. For activating smoke detector alarm we bring smoke generated from cigarette or other means close to it and for activating flame we use special flame light torched close to flame sensor and when both get activated then hypermist will be activated for that particular unit.. I hope you understand!!!! If you like the video please Mandar Adhikari share with your friends and share on your Facebook wall about my channel!!!!
@@MarineEngineeringHub Thank you vary much..... ..l had already shared with my friends and they also liked ur video thank you sharing your knowledge with us
Glad it was helpful! please share these video on your facebook and whatsapp status. MarineEngineering hub aim is to bring all our marine friends to this platform so that we can learn and grow together
Hello pritam We are not using sea water because it will cause salt formation in the nozzle when not in use and hyper mist is for emergency purposes use so fresh water is used with adequate capacity to extinguish fire of particular area
Hypermist is provided in critical spaces to provide a upper hand for quick fire fighting. As the fuel operated machinery has the more chance of caught up fire... therefore it is provide in most of the spcae where fuel operation involved
This system focussing on fuel powered equipment, since the equipment is in operation, running condition Tank is static, the fuel contain is to rich to get cought in fire
Keep posting videos brother
Your videos have been very helpful for Class 4 preparation
Thank You so much!
Thank you for your response and support!!!!
Please do share !!!!
Marine Engineering hub aim is to bring all our marine personnel to this platform so that we can learn and grow up together!!!!
we want someone like you to explain like this from deck side btw absolutely loved your understanding
keep Grinding
Great video man!!
impressive work. A lot of hard work has been done.
Thank you for your good information sir
thank you naveen for your encouragement!!!
Please share our video with your friends group
Keep posting more video's like this for others to know the thing 🤠
Great video. One comment: The water mist pump motor is NOT energized by the emergency switchboard. Only by the Main Switchboard.
Thank you so much for the video sir!
Thank you so much sir your explanation is very nice I can understand everything. Sir want Co2 system complete video
Thank you for your response!!!!
Please do subscribe and share with your friends also!!!!!
Thank you very much Sir.
You are most welcome
Amazing brother. We'll explained. Hatsoff and thanks. ❤️
It's very good video...
Good explanation try to cover co2 and deck foam fire fighting system
Thank you for your response and suggestions!!!
Sure will make video regarding CO2 and deck foam fire fighting system!!!!
Till then please watch my other video !!!!
And please do share with your friends !!!
The upto 40Mpa pressure is solely provided by the fire pump or the pipe work installation help to increase that pressure?
there is separate pump for hypermist which is high pressure pump which generates 40mpa pressure
VERY good expaimatyon please make video for foam and co2 also
Already made please watch it !!!!
And share with your friends!!!!
Bhai kya smjhate ho👍👌👌👌 kuch deck walo ka bhi syllabus cover krwado second mates ka
Hyper/Water mist system on ship's. Practical video
Please click the link below
ruclips.net/video/qoOd39tlsRE/видео.html
Great job sir
Thank you for your response!!!!
Nice video well explained tankyou bro
In sprinkler system, when the freshwater tank level becomes low level, then sea water pump gives supply automatically. In this system what happens if tank level becomes empty while fighting fire?
Sir in your sheet it is showing flame and smoke detector and you are saying heat and smoke detector which one is correct?
Hyper mist is activated by flame and smoke
So sheet is correct
Informative video.Good job brother. What would the line pressure required to maintain in the water mist system pipe lines?
Thank you sir
Thanks Levi!!!!
Please do share our video in your social platform!!!!
THNK U SO MUCH SIR 👏👏👏
Thank you Salman for your response and support!!!
Please do share this post on Facebook and whatsapp status!!!!
Marine Engineering hub aim is to bring all our marine personnel to this platform so that we can learn and grow up together!!!!
bhai bhot badiya
Hyper/Water mist system on ship's. Practical video
Please click the link below
ruclips.net/video/qoOd39tlsRE/видео.html
thanks
Explaining about thrust block...... Sir
Ok sure I will make video.
Please give me some time!!!
Till then please watch my other video and share with your friends also!!!!
Very educative
keep it up
Thank you Harpreet !!!!!
if you like the video please share on your facebook and whatsapp account.
Marine Engineering Hub aim is to bring all out marine personnel to this platform so that we can learn and grow together
Please make a video on exhaust bellows
Good videos sir
Thank you for your support !!
Please share the video with your friends!!!
My aim is to bring all my marine friends to this platform where we can exchange knowledge.
Pls tell solas regulation of hyper mist,
Hyper/Water mist system on ship's. Practical video
Please click the link below
ruclips.net/video/qoOd39tlsRE/видео.html
How to check operation of mist manually
In order to check it operation we have to activate both smoke and flame detector alarm.
For activating smoke detector alarm we bring smoke generated from cigarette or other means close to it and for activating flame we use special flame light torched close to flame sensor and when both get activated then hypermist will be activated for that particular unit..
I hope you understand!!!!
If you like the video please Mandar Adhikari share with your friends and share on your Facebook wall about my channel!!!!
@@MarineEngineeringHub Thank you vary much..... ..l had already shared with my friends and they also liked ur video thank you sharing your knowledge with us
Very useful 🙌
Glad it was helpful!
please share these video on your facebook and whatsapp status.
MarineEngineering hub aim is to bring all our marine friends to this platform so that we can learn and grow together
Nice video
Awesome!
Thank you for your response!!!!!
Please watch other Video's of Marine Engineering Hub !!!!!
Why sea water is not used in hypermist system?
If we use sea water,there's a possibility of nozzle get choked due to salt concentration
Thanks for you
Thank you Abdulla for your response!!!
Please do watch our other videos and please do share our video in your facebook and whatsapp group!!!
Why use fresh water . Not use sea water
Hello pritam
We are not using sea water because it will cause salt formation in the nozzle when not in use and hyper mist is for emergency purposes use so fresh water is used with adequate capacity to extinguish fire of particular area
Got it
Why hypermist keeping high temperature area, why fuel condition room , near service tank and settling tank not keeping
Hypermist is provided in critical spaces to provide a upper hand for quick fire fighting. As the fuel operated machinery has the more chance of caught up fire... therefore it is provide in most of the spcae where fuel operation involved
In fuel conditioning room also fuel operation takes place , that's place max tym spilling occurs while drainning the tanks
This system focussing on fuel powered equipment, since the equipment is in operation, running condition
Tank is static, the fuel contain is to rich to get cought in fire
The system will not work , (direction of non return valves )