Good explanation and loved the mockup tanks. Question: is this true: If (when) the float valve system fails, you have full bore inlet water flow, and flood in your house. Too much water inlet overwhelms the overflow. If the brass lever arm system fails, you have slow trickle continuing, and trickle goes out the overflow pipe. No disaster. Is this correct?
Great product review. Can the valve be used in a hydroponic garden system to regulate the water level in several hydroponic grow buckets? Thanks in advance...
OMG this was brilliant. Especially because those brass float valves give so much trouble even when brand new. I hate them. Where can I get these to buy? Are they available on Amazon? I need this now.
Hv bought one frm u. I found out when water flow stops, it created a strong backward pressure to the tap source/head which then causes the pvc pipe connector to explode/burst out from the tap head. Any solution to this?
This was a smooth explanation. Thanks! How much pressure it can handle? is there any limit? We have supply coming from 10000L overhead tank at 18th floor receiving at 11th floor.
Would it not exert a back pressure to the water pump particularly in big housing complex where multiple no. of overhead tanks are filled by running a single pump from the reservoir?
I want a float to put inside a 35 gallon water tank that when the tank is full, the float sends a signal and turns a ball valve to switch off a live water pipe. Do you know what I need?
I have the inlet in the middle of the sump/tank. I want to fill the sump/tank to 90%, then it has cut the inflow. Can you suggest me the type of control float/valve to be used????
Your demonstration is good, but that turns on the water everytime one flushes the toilet. Is there a float valve that can switch off the borehole pump? Without the electrical float switch...
I just bought one of these on Amazon. I hesitated for several weeks now wondering what type of threads I would have to match up to. No mention of the thread type on this video or on the packaging.
The third model starts at 03:07 which is connected to the bottom of the tank, it will begin filling the tank when the water reaches the bottom (The tank becomes empty) and stops filling the tank when the tank is full..is that right....Thank you...
I imported side inlet mounted outside from china but its not working proper. I dont know why Water level raise dont close the valve and it over flow valve from top and water starts droping from valves topside its not transparent so cant see whats the problem in it i would prefer ball valve inside tank at the end of water inlet that i can see if its not working properly
Good day is it possible to use automatic water level control float valve mouth outside to an 82-gallon pressure tank? or its only applicable to a water tank with open and closed lid?
Is there something that we can adjust the depth of the water? Those items you showed will activate water to come in everytime someone will flush a toilet.
But this compact float valve will only allow small amount of water to be used and your water pump will keep running every few seconds depending how big your water tank is.
It will damage your water tank pipes if this cuts off water supply. The motor should be switched off instead of blocking the water flow. Blocking the pipe may cause damage to pipes. Use carefully.
What the funny video because your water motor is working by an electrical motor and ok might ur valve will stop water but how ur motor will stop the electricity 🤣
![BRASIL vs. URUGUAY [1-1] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 12](http://i.ytimg.com/vi/-hWBAuxF1eY/mqdefault.jpg)
Thank you so much for your easy-to-understand explanation
sooper 🎉. can you please let me know how the other side of the pipe connected to ?
Hi,
Thank you for this video and the thorough explanations. This video is quite helpful. I appreciate it and you. Thanks again.
Glad it was helpful!
Concise and precise explaining
thank you!
Thank you for these demonstrations.
My pleasure!
excellent presentation sir
Good explanation and loved the mockup tanks. Question: is this true: If (when) the float valve system fails, you have full bore inlet water flow, and flood in your house. Too much water inlet overwhelms the overflow. If the brass lever arm system fails, you have slow trickle continuing, and trickle goes out the overflow pipe. No disaster. Is this correct?
I believe both are the same when they failed.
@@ATKCeWarehouse Thanks
Great product review. Can the valve be used in a hydroponic garden system to regulate the water level in several hydroponic grow buckets? Thanks in advance...
Yes, absolutely
I'm wondering - if this can be used to replace the toilet cistern water inlet & float ball?
Yes, for for the 1/2"
OMG this was brilliant. Especially because those brass float valves give so much trouble even when brand new. I hate them. Where can I get these to buy? Are they available on Amazon? I need this now.
www.ewarehouse.my
I bought one and I am finding it hard to understand the mechanism after opening it. That is why I am here.
thanks
Very good explanation,thanks
Thank you so much for the demonstration sir.
You are welcome
outstanding demonstration!!!!!
Thank you for this video I have a dozen of these and a bit hesitant to install to replace the regular brass floaters
Still prefer the old school version, which look more solid and convincing.
Hv bought one frm u. I found out when water flow stops, it created a strong backward pressure to the tap source/head which then causes the pvc pipe connector to explode/burst out from the tap head. Any solution to this?
This was a smooth explanation. Thanks! How much pressure it can handle? is there any limit? We have supply coming from 10000L overhead tank at 18th floor receiving at 11th floor.
Would it not exert a back pressure to the water pump particularly in big housing complex where multiple no. of overhead tanks are filled by running a single pump from the reservoir?
i am not sure about this.
Very well explained, thank uou very much!
You are welcome!
So if it has 3 holes, its exterior the tank. Thank you!
Hi dear how much can we trust if this device will not fail ? Have you experienced if this device couldn't shot down? Thanks
it is possible that the product fail, please test before actual commissioning.
Very good & it's very simple. Is it available in India, in Bangalore. Karnataka State.
thanks for the info.
Outlet flow becomes slower after plug in. Why? Just replace new one
I want a float to put inside a 35 gallon water tank that when the tank is full, the float sends a signal and turns a ball valve to switch off a live water pipe. Do you know what I need?
you need a float or a sensor
How to connect to a garden hose, please
you need to use a connector
omg this really helped me. thank you so muchhh sir 🥰🥰
thanks
Amazing product i want. How can I buy?
I have the inlet in the middle of the sump/tank. I want to fill the sump/tank to 90%, then it has cut the inflow. Can you suggest me the type of control float/valve to be used????
Can you share me the diagram?
quite simple and great
Your demonstration is good, but that turns on the water everytime one flushes the toilet. Is there a float valve that can switch off the borehole pump? Without the electrical float switch...
I don't think it would be possible without electric float switch.
Can it fit in the hi prssure line?
Hello again, i bought one of those, but after the tank is full, the valve continues to dropping drips! Why is that, it will overflow my tank.
May i know which model? Please submerge it into water and check if the water still coming out.
I can't find the walve in my system! Help!! ;)
Thank you boss, nice video!
Please like and share!
I just bought one of these on Amazon. I hesitated for several weeks now wondering what type of threads I would have to match up to. No mention of the thread type on this video or on the packaging.
In Malaysia, we are using BSP thread.
@@ATKCeWarehouse😊😊😊😊😊😊😊😊😊😊
@@ATKCeWarehouseqqq
@@ATKCeWarehouse😊😊😊😊😊😊😊😊😊😊😊
Is there any valve that checks the surface of the water and then turns on/off the switch of the motor?
The third model starts at 03:07 which is connected to the bottom of the tank, it will begin filling the tank when the water reaches the bottom (The tank becomes empty) and stops filling the tank when the tank is full..is that right....Thank you...
yes
I imported side inlet mounted outside from china but its not working proper. I dont know why Water level raise dont close the valve and it over flow valve from top and water starts droping from valves topside its not transparent so cant see whats the problem in it i would prefer ball valve inside tank at the end of water inlet that i can see if its not working properly
check if the float is working
How to buy this product
Good day is it possible to use automatic water level control float valve mouth outside to an 82-gallon pressure tank? or its only applicable to a water tank with open and closed lid?
not recommended, with high pressure.
this was so great, thankyou
welcome
Would have been interesting to see the inside of those automatic water leveling valves.
Good idea!
Will it work in hydropnuematic or pressurized inlet line?.
not recommended.
Very nice explanation ….. thank you
Do you sell it in Amazon US?
nope
Is it useful for ground water tank where municipal corporation water connection in tank having great force of water.
Is this more durable than the ball one?
Very nice with details :) Thanks
thank you!
Wow...thank you guys for sharing good idea.god bless.
Thank you so much!
@@ATKCeWarehouse welcome guys.
Madali masira yan... Nka 2 beses na bili na ko 4 months plang
Thanks for sharing. Please try the stainless steel version instead.
Do you have tutorial how to repair the blue one..?
Not at the moment
@@ATKCeWarehouse ooohh.. Thank you.. You noticed me..❤
@@giegie3015 welcome
After use for sometime, found water leak at stopper after water level reached the valve. Why is it happen and is there anyway to fix it? Thanks.
unscrew it and have a look at the plastic float, might be some sands or fine stone blocking its way.
@@ATKCeWarehouse Thanks.
i wondering - it posible to use 2 vavle in 1 tank? with same pump..i mean split from 1 pump, to 2 floating valve & go in same tank.
Not recommended.
Does the water supply has to come from a water tap or something of that sort? Mine doesn't seem to work properly:(
yes, with pressure.
Thank you for this clip video 💯 good 👍
thank you.
How to buy your item?
Is it successful if silty water passes through it and does this effect the working of this with time??
If mode is : side inlet mount inside
There's a small filter mesh, but you must clean it regularly.
How much inlet pressure it can sustain
Can it be opreted on 6-7 kg/cm2 pressure water
Should be fine, as the max working pressure is 10 bar.
Good job
Thanks
why are they not making this for more than 1 inch dia?
perhaps, it was the pressure setting.
Hello, I am searching something like your valve but my water temperature is +110 to +120 C..... any suggestions?
Not too sure on this. Let me check further.
@@ATKCeWarehouse ok, thank you
Sir, how do I purchase these products in Africa??
email to us
@@ATKCeWarehouse your mail address please
Hi. I got a question. Will it work the other way around if i flip it upsidedown?
i don't think so.
Can I use that on a high pressure water source?
preferably not more than 5bar
If you water motor Pump / JET Pump ?
Where to buy?
follow the product link
Can this be used in western toilet flush tank.
yes
Is there something that we can adjust the depth of the water? Those items you showed will activate water to come in everytime someone will flush a toilet.
lower down the sensor
Where to buy this stuff?
Nice video
Is it ok to pressurizer stprage tank?
not recommended
Nice
Thanks
Hi bro where do I get this
following the product link.
How much & how to order/
Buy
go to our website at www.ewarehouse.my
how to buy this items level water valve
www.ewarehouse.my
Thank you brother
Most welcome.
How to buy this is available in Philippines?
try visit www.ewarehouse.my
will that work on oil?
not sure.
what is the brand?
But this compact float valve will only allow small amount of water to be used and your water pump will keep running every few seconds depending how big your water tank is.
choose the right size.
thank you
Most welcome. Please share it out!
Can i use it for reserve water tank?
Yes.
Kedai dekat mana?
Banting, Selangor
Rate please
www.ewarehouse.my
Interesting...
Thank you!
How to order
Go to www.ewarehouse.my
I am from Nepal
What this price
Terbaik 👍
Terima kasih!
This valve seems more tahan than the normal pelampung one.
So far so good!
Tq bro
It will damage your water tank pipes if this cuts off water supply. The motor should be switched off instead of blocking the water flow. Blocking the pipe may cause damage to pipes. Use carefully.
not suitable for untreated water..will stuck with debris or ferum from water.. especially well water
It's confusing a much..
Walve, wideo,
Water full lank automatic motor off
What the funny video because your water motor is working by an electrical motor and ok might ur valve will stop water but how ur motor will stop the electricity 🤣
it's a simulation
I want to be your India partner
apa lu cakap ni ?lu ada di negara mana ?wa tak faham apa lu cakap .haiya tak mahu la support u
How to order