Installing a Floating Switch in Your Water Tank for Automatic Level Control
HTML-код
- Опубликовано: 11 дек 2019
- Installing a Floating Switch in Your Water Tank for Automatic Level Control
Installing a floating switch in a water tank for automatic level control is a smart way to maintain consistent water levels. Here's a detailed guide on how to do it:
1. *Gather Materials:*
- Floating switch
- PVC pipe (if needed)
- Mounting bracket or clip
- Electrical cables and connectors
- Tools: drill, screws, screwdriver, wire stripper, pliers
2. *Choose the Right Switch:*
- Select a high-quality floating switch suitable for your tank's material and the type of liquid it will be used with (water, oil, etc.).
3. *Identify Mounting Location:*
- Choose a location inside the tank where the switch can move freely with changing water levels.
- Ensure easy access for installation and maintenance.
4. *Prepare the Switch:*
- Follow the manufacturer's instructions to prepare the switch, which might involve attaching a float, adjusting settings, or connecting cables.
5. *Install Mounting Bracket or Clip:*
- If the switch doesn't have a built-in clip, install a mounting bracket securely on the tank wall.
6. *Attach the Floating Switch:*
- Insert the floating switch into the bracket or clip.
- Make sure it's properly secured and can move freely up and down with the changing water level.
7. *Install PVC Pipe (if needed):*
- For deep tanks, you might need to attach the floating switch to a PVC pipe to extend its reach to the desired depth.
8. *Connect Electrical Cables:*
- Follow the manufacturer's wiring diagram to connect the switch's electrical cables to the control panel or pump.
9. *Seal Connections:*
- Use appropriate sealants or waterproof connectors to ensure a watertight connection.
10. *Secure Cables:*
- Secure the electrical cables along the tank's exterior or in a conduit to prevent damage.
11. *Test the System:*
- Fill the tank with water and observe how the floating switch operates.
- Check if the switch triggers the desired action when the water level reaches certain points.
12. *Adjust Settings (if needed):*
- If the switch is adjustable, fine-tune its settings to match your desired water level ranges.
13. *Monitor and Maintain:*
- Regularly check the switch's operation and clean it if it gets clogged with debris.
14. *Integrate with Control System (Optional):*
- Connect the floating switch to a control system that can activate pumps, valves, or alarms based on water level readings.
15. *Educational Content (Optional):*
- Create content, such as videos or instructions, to educate others about the system's operation and maintenance.
Remember that working with electrical components near water requires special attention to safety. If you're not comfortable with electrical work, consider hiring a professional to assist with the installation. Always refer to the manufacturer's instructions for the specific floating switch you're using.
I like your vent pipe
Keep up
Very good idea
Good work
Well-done
Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
Hi sir
Good job
Good work done i like it
Sir, for a school or hotel with lots of students and guests respectively, should the float switch switch on the pump when the water level is high instead of when running low?
Thank you
Nice
Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
Where can i supply the floating switch electricity
Bonne contuation merci
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
ऑटोमेटिक लिक्विड लेवल कंट्रोलर लगाना चाहिए,,, फ्लोट स्विच आपके ग्राउंड वाटर टैंक मे पानी खत्म होने पर भी मोटर स्टार्ट कर सकता है और मोटर खाली चलकर जल सकती है
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
pls send ur mob.no. I will take advice .
Génial patron
Very good
Thank you so much for your comments. Please share our videos to your friends and country. Like us, comment us and subscribe to our channel.
Beautiful video sharing
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
gracias
Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
nice
Sir dol starter me pump motor ko auto pr kaise legate hai eska connection kaise kare
Nice ♥️
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Good
Thanks dear for your comments. Please share our videos to your friends and country. Like us comment us and subscribe us for more.
Nice sir
Thank you
Aap bahut achchha dikhate ho
احسنت
Gd am sir.my tangke po ako sa 3thflr wlang motor siya.pressure lng ng tubig ang ginagamit ko po pra mapuno ang tangke sa 3th flr.flooter n d bola gamit ko.kso minsan umaapaw tuwing gabi at hindi ko npapansin umaapaw na dati hindi naman.ngaun ngloloko n siya.minsan ok minsan umaapaw.ano po kya problema ko sa flooter? Pls reply po slamat
I need a circuit diagram for a float switch connection to activate water pump pumping water out of the tank when it's filled with water
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
@@learnpassearnprofessional7467 lol I'm mo
Sir, I have a water pump that needs to fill the water tank. The motor is used to run when the tank gets empty and stop when it gets full by means of a float switch. The water tank is approximately 400 meters away from the water pump. My question is, Can I use to extend the wire of the float switch from the water pump/controller to the water tank by 400 meters to fully automate the system? If so, what size and type of wire do I need to use? Thank you
Yes u can use but use the haevy wire for that becoz it's too long
That's all very specific to your supply power, and the ratings if the equipment, be careful.
this job professional???
Sir 2 hp ka motor hai usme power chalu karte hai to amp 30 se jyada ho jata hai starter kharab hai ya motor kharab hai
moter ki waindng me frq hy
Beautiful engineer
Re chastrines los taraservice!
Thank you
With out low voltage protection may cause
Burne the motor
😀😀 Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
No. It shuts power completely to the pump when the float switch is activated
Motar me iska conecsion kese kare???
Can i use this with Dc 12 volt pump?
yes you can
Nice
फ्लोट स्विच की वायरिंग पर इस पर पूरा वीडियो बनाओ
Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
সাবমাসিবল কনটোলি বক্স কিভাবে লাগাবো
All ok but,,making the Knot is not the professional thing,,instead you put one stable clamp or related,,and show all detailed vedio,,why and what,,how you use after fixing..what is the impact of this installation
Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.
Kya es ke kharab hony se pani me krant asakta hai
Thank you
Yeh kya h plastic sa jisme dono side ke wire connect kiye..?
Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
The weight should be farther from the float to use the full capacity of the tank! Too close to the weight and they pump will turn on and off quicker. The float activates not at straight up or down but rather a 40 degree up and down angle; making the switch range also smaller. Move the weight to the middle and the hanging float closer to the bottom. If water demand is high, move the weight and float higher in the tank.
Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
God bless you... 🙏🏻🙏🏻
how do u make the switch range bigger. i have a 3 meter tank and the switch range maybe is only 1 meter.
Joshua Tan get a longer cable
গজগ
Sir mujhe water leble ka connection karna hai jisme teen senser lage rahte hai ye teeno ka kya kam hai aur auto switch kharab hai ya starter me kharabi hai kaise malum kare sir please mujhe sikha dijiye
We're asking u question u are telling thanks and share the video is tht make any sence?
What question bro?
He doesn't understand English. Lol
Can I connect two sensor to the pump from two tank
@@kennethrobinson8369 I rather you connect the two tanks together by way of piping and ballvalves and use a single sensor in the tank that is at a lower elevation of the 2.... I have done this using 6 ×10000L tanks... works great.
Another thing I would not tie a knot in my electrical cable as he did at the start of the video...instead wrap the plumbers tape around the required length on the sensor cable forming a bulge and then pull the weight onto it firmly.
@@kennethrobinson8369 yes you can but you have to use 1 spdt 12v relay to operated the first tank
Hi
ما سبب اصدار صفير من المكنة عند تشغيلها
It's the engine turning up the water
Pressure Pump complaint
Sorry, but insulation tape is not waterproof. Should never be used outside where it gets wet.
Minimum is you'll end up with a short or the pump not working. At the worst you'll end up with someone dead!
Do a proper job and use a waterproof connector.
le falta un poco de más calidad en su técnica de trabajo gracias..
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
You must explain what u are doing
Tahir Malik
Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
This not right way to install the float switch, should not do knot on the cable, counter weight have cable locking ring.
Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
The video owner didn't understand what you said
How can you fasten an electric cable to increase its temperature ???
Imagine this dude
Sir, what power supply it requires, can we direct connect to 230v outlet or it requires dc to ac converter.?
Thanks for your comments. Please share our videos to your friends and country. Like us support us and subscribe to our channel. Be happy ☺
230V=230VAC you don't need to convert. AC=Alternate current.
@@richardcharman You better control it by a 24v transformer... Thanks
220 ac
DC 12v water pump k sath ye ho sakta ha?
Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.
Bhai achha flot switch konsa co, ka aata hey
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
कहां से खरीदा जाऐ
দুই ঘোড়া মটর লাগানো জাবে কি জানাবেন
Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
Connection diagram and full wiring connection
Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
bad practise to twist cables.
Thank you
Cost please including installation
Thank you so much for your comments. Please share our videos to your friends and country. Like us, comment us and subscribe to our channel.
Comment installé un water iter
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
haiwan
Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
Moran ....
YOU MUST USE A RELAY.
Ree stattar cunection kitchen ota dakhayi ni.
Please what's app me 7278034944
Sir is mai to apki compelet wiring nh batai
Campelet waring dekhnay k liay myery chanal ko SUBSCRIBE kry saudi arbia main Plumber Electric
Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
que no leíste las instrucciones de ponerle el arito que traía el sobrepeso de lugar de hacerle un nudismo cul.
Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
Which wire to use the switch to tank bro
Its locally produced brother. 😀😀 Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
@@learnpassearnprofessional7467ermano
Jzvkxh
Bxbvf
Idn
এই সুইচ কি পানি একদম শেষ হলে অটো চালু হয় নাকি পানি কমলেই ভরে ওঠে আবার। 😊
লেভেলের থেকে পানি কমে গেলেই অটু চালু হয়ে যাবে
ভাই আপনি যদি কাজ বর্ণনা দিতেন কিভাবে কি হয় অনেক উপকার হতো
Thank you
ভিডিও দেখে কিছু বুজি নাই বলতে হবে কিভাবে কাজ করেন
هذا التنفيس للتانكي الخزان خطأ يجب أن يكون عند نقطة النزول
Thanks for your comments. Please share our videos to your friends and country. Like us support us and subscribe to our channel. Be happy ☺
Poor demonstration like non technical people make it so that people can understand
Thank you
make an English video
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
সম্ভবত 1000 লিটার টাংকি এটা ফ্লোট সুইচ ইনস্টল টা তোমার সুন্দর হয়নি টাংকি আধা ফুল থাকে আদা খালি থাকে এই ধরনের কাজ তো আমার জীবনে আমি দেখি নাই কাজ সুন্দর করে করার চেষ্টা করো তাহলে সুন্দর হলো
😀😀 Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
Dear your demo not complete why?
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
Very bad
Good work But how to know automatic
Aman kumar
এটার দাম কত
भाई कितना खर्च आता हैं
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Flote switch full instaulaction
Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
7yjdbxv
Bznfbbnd x
@@learnpassearnprofessional7467yoyoyoyoyoyoyoyoyiyi
@@learnpassearnprofessional7467 gxgf5ej
Its not a best fitting of float switch.
😀😀 Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
اللهم بارك اخي ناس زوينين دخلو عندي القناة لي باغي تعلم مرحبا بكم
hi
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Asit kuch poochna tha
Water tank ka water circulation neeche se upar nai ho sakta ?
Tsk tsk tsk...
😀😀 Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
Fruit sensor
Is it me , or he didn't connect the earthing wire ? 🤔
There is no metal to touch, so no Earth required.
@@GlynWilliams1950 in that case why would the manufacturer provide an earthing wire?
@@dimitrz2000 there is no earth wire, the green wire is not for Earth.
@@GlynWilliams1950 thanks for clarifying
Very Unprofessional Installation & Workmanship ! It's not a right method. Use Manual Or Taking a guidelines from Professional Technicians. Avoid Damages of Floats.
Yes I agree. Insulation tape used outside in the rain and sun is not acceptable. This is dangerous wiring.
تركيب غلط في غلط
😀😀 Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
Do not show some unskilled works
Bcz many new electricians are on thear way
And they see this works
Your out of this jop- ✋ STOP
Cost kitna hain bhai
Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
4 USD
00:25 dont fold the wire mr..
No parece un electricista, al parecer es zapatero, eso no tiene disciplina, técnica y estética
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
वाटर लेवलर को टेलीफोन की तार से जुड़नी चाहिए उसकी लाइफ बहुत ज्यादा होती है और सस्ती भी होती है ज्यादा चलती भी
No ac supply
Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.
এর দাম কত
Kr kya rhe Ho btao bhi kuch
Ya gutkha kha K kaam krne lgre
Thank you
ভাই এসব ছোট কাটু ভিড়িও একানে দিতে হয় 🤣🤣🤣🙏🙏
Thank you so much for your comments. Please share our videos to your friends and country. Like us, comment us and subscribe to our channel.
very bad tank will not become full...
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
Electrical channel
Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.
not ok sir
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
first wrong your water tank connection the out put water flow pipe does not connect union . any problems in water tank how open it with out union . 2nd you fit the device very deef on water tank . water tank does not full of water .
Ok sir, Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
1) Sir it may be that he doesn't know how to use a timer and the relay because the water in the well could be small to go up to the best level so he dicided tho connect it that way
2) sir he is working with pressure pipe the place may not be in a rigit