@@BDPerformanceWrexham great video team, I enjoy all your videos, you guys are great fun... I do need some assistance, I have a 3 port OCC, 2 inlets, 1 outlet. I know the 1 inlet comes from the rocker cover & I assume the outlet goes back into the top port on the factory OFH. So, on the 2nd inlet to the OCC, which pipe goes in there??
Excellent video. Will definitely help me install mine. What do you do with the other breather hose that was in the left hand side of the original housing? I see you blank the lower inlet breather but could not see what was done with the oringinal hose on the left.
Hi. After I installing it I see the white cloud under my car and when I open oil cap on started engine It's same white smoke. Is it normal? Or I have somethink wrong with engine?
This is something I've been looking into. Does this stop the oil filter housing from failing? Also is it necessary to replace the oil filter housing even if it hasn't failed yet?
store.bdperformance.co.uk/index.php?id_product=436&controller=product&id_lang=1&search_query=Oil+breather&results=6 There is an option for supply or simply check the box on the right hand side for installation! Hope that this helps 💙
Not if you have a bigger issue! If you have crank case pressure then this will just force the issue elsewhere. Just send us some pics of the leak so we can advise. Thanks for the question and thank you for watching 🙌
@@BDPerformanceWrexham I don’t have any at this time. But I’ve had the filler housing replaced and been 8 weeks since new ones on. Now it’s back again but it’s very mint or as in a tiny bit. It’s not spraying out or splashing anywhere
Gary Mugford did you want us to install on an engine that you are bringing to us? If this were the case; we could only install the housing unless the vehicle were with us too. The kit itself is £599, on exchange for your original housing. We do this in order to keep producing the kits using the exchange units we have returned Hope this helps 🙌🙌🙌
top video darren whats the down side on blanking of the pipenon inlet manifold pipe that goes to the turbo inlet?why would it give white smoke?greetings all the way from south africa.
@@BDPerformanceWrexham if you blank of the pcv valve pipe that goes to the turbo inlet side like alen did in the how to video ,what would the down side?
Our kit is available from our online shop: store.bdperformance.co.uk/index.php?id_product=436&controller=product&id_lang=1&search_query=Breather&results=11 There are also kits available from AIRTEC, ProAlloy and Spec-R. Jam sport also do a return to sump setup. Hope that this helps, TeamBD
Cheers AL, much appreciated. It's on my list. Exhaust and intercooler next, just whacked a set of Bilstein B14 PSS's on today, awesome.
Roy Evans very welcome 🙏
@@BDPerformanceWrexham great video team, I enjoy all your videos, you guys are great fun...
I do need some assistance, I have a 3 port OCC, 2 inlets, 1 outlet. I know the 1 inlet comes from the rocker cover & I assume the outlet goes back into the top port on the factory OFH.
So, on the 2nd inlet to the OCC, which pipe goes in there??
Top man AL! Love you guys type of catch can with the bd logo on top looks the business 👍🏼 been looking forward to this vid cheers!
Ryan West thanks so much 💙
Great video, keep up the good work! Can’t wait to meet you guys next week. I know my pride and joy will be in good trusted hands!
Look forward to meeting you :D
Well done lads. Another great video 👍
sean_st mk2 really appreciate the comment and all your feedback on previous content 🔥
Loving the videos guy's....some great technical information and advice.
Keep them coming 🙂👍
Thank you 🙏
Thank you for making the effort to make this video has been very helpfull
glynn mason thank you so much, such a lovely comment 💙
You are very welcome 🙏
Awesome kit and fantastic video guys .Where is that vac pipe and fitting from it looks more flexible ?
Blue oval Passion the 90 off the plenum you mean?
@@BDPerformanceWrexham yes that's the one
I'd like to know what's required as I have the customod one fitted and its catching on my crossover I got from you guys
Great video enjoyed watching mate
Thank you buddy 🙏
Excellent video. Will definitely help me install mine. What do you do with the other breather hose that was in the left hand side of the original housing? I see you blank the lower inlet breather but could not see what was done with the oringinal hose on the left.
joe brown not sure which hose you mean sir?
Think its called oil filter breather to head pipe?
When you use the silicone bung to blank the lower inlet its the hose on the left with the hose clip on it.
What is the purpose of having three ports? And why is there a port at thr bottom of the breather? Verses habing three ports above ?
Hi where's the negative vacuum coming from, if blocked from the same intake.
Hi. After I installing it I see the white cloud under my car and when I open oil cap on started engine It's same white smoke. Is it normal? Or I have somethink wrong with engine?
This is something I've been looking into. Does this stop the oil filter housing from failing? Also is it necessary to replace the oil filter housing even if it hasn't failed yet?
This isn’t a product that everyone requires. Please call us to discuss your specific requirements 🙌
Can you guys build volvo T5 engines if possible? Esp the B5244T5 2.4 t5 found in a s60 04 to 08.
I have one and i am wanting to get my engine forged?
How much fitted please I'm on my 2nd form volvo yours looks like just what i needed £? Cheers
store.bdperformance.co.uk/index.php?id_product=436&controller=product&id_lang=1&search_query=Oil+breather&results=6
There is an option for supply or simply check the box on the right hand side for installation!
Hope that this helps 💙
Dose anyone the thork sitting on the housing unit
Any idea on what good this is for the engine thanks
Can I order this kit from you? what price? Is it possible to ship to Russia?
Can you do the same with a catch can instead of a breather?
i have a volvo c30 t5. what did you do to the original connector for the housing?
Hi what size are the AN threaded fittings, a friend has a kit car with limited space but this kit might just be the job for him
Do you sell relocation kits for the battery if wanted to put in trunk ?
Would this stop the oil filler housing from stop leaking oil from the main black lid ?
Not if you have a bigger issue! If you have crank case pressure then this will just force the issue elsewhere. Just send us some pics of the leak so we can advise.
Thanks for the question and thank you for watching 🙌
@@BDPerformanceWrexham I don’t have any at this time. But I’ve had the filler housing replaced and been 8 weeks since new ones on. Now it’s back again but it’s very mint or as in a tiny bit. It’s not spraying out or splashing anywhere
@@2pokeryan this may be crank case pressure then and this kit would maybe mask the issue
@@BDPerformanceWrexham I’ll get it compression tested to see. What happens if the test come back all good ? And it’s not crack case pressure
@@2pokeryan something is causing the leak
So the old OFHGaskets are OK to reuse?
How much for kit and fit for an engine that’s out like this one please???
Same colours as these too plz
Gary Mugford did you want us to install on an engine that you are bringing to us? If this were the case; we could only install the housing unless the vehicle were with us too.
The kit itself is £599, on exchange for your original housing. We do this in order to keep producing the kits using the exchange units we have returned
Hope this helps 🙌🙌🙌
top video darren whats the down side on blanking of the pipenon inlet manifold pipe that goes to the turbo inlet?why would it give white smoke?greetings all the way from south africa.
Could you rephrase the question please?
Thanks for watching and happy to have international viewers 💙
@@BDPerformanceWrexham if you blank of the pcv valve pipe that goes to the turbo inlet side like alen did in the how to video ,what would the down side?
Another mod I want Please 👍
davy mac no problem, give us a call tomorrow Mr Mac 🙌
Where i buy this?
Our kit is available from our online shop:
store.bdperformance.co.uk/index.php?id_product=436&controller=product&id_lang=1&search_query=Breather&results=11
There are also kits available from AIRTEC, ProAlloy and Spec-R. Jam sport also do a return to sump setup.
Hope that this helps,
TeamBD
Micrometer 😂 you mean vernier