awesomeness just done that mod took a hour to get the oe kyosho diff smoothed down so wheels and meshing is all just right and oh my days i done a figure 8 on me kitchen sideboard the control is so amazing and the figure of 8 was so tight .big thanks rc garage
This is a great little mod but I wish it was around about 5 more this ago lol. Once I picked up my RWD drifter I can’t go back to AWD. Great video man, this is the stuff the community needs!
Thanks . I'm trying to find a way to Co-exist between the 2. Hopefully when our purpose built drift track is ready... I'll run counter steer awd and rwd in harmony.😁
Garage RC yeah that’s my problem, I don’t have a dedicated drift track so my space is super limited. I’m hoping once I have a full on drift track I’ll be able to crab walk & hold long angles, but for now it’s just a dream 😹
Pinion recommendations for sliding on that center shaft? (Is the center drive shaft the same OD as a motor drive shaft... meaning pretty much any Kyosho pinion would work??)
Love the channel been thinking about getting into these cars for a long time and never have I'm not a younger person I'm 51. Is it pretty easy to pick up working on these I don't have the best vision in the world. I have been a member of your Instagram site but I just joined the Facebook one as well
I have freinds who are 60. Get a good magnification set up. Magnetic mat to catch screws. Start with mini z awd if not sure easier to get going. Less to go wrong.
Thank you so much for this. I've been looking into how to do CS for the past month and messed up a diff and some gears. This seems a lot easier with an extra rigid axle laying around. Do you know what shim size is for the axle if we do end up needing it? Just curious. The last diff I made had issues cause of the spacing.
@@GarageMiniRCUK thanks a lot. I took the time to do it today with a kyosho rigid axle and a 15t aluminum pinion gear. I had to sand down the aluminum to length, but everything seems good now. This definitely fits better than having to do it with the default diff mod. I did this for my ma-03f that I converted to fwd. Thanks so much!!
Any chance you could answer a quick question? I just went through and did the CS mod here but my MA-030 is pretty much not drivable. With a 5600k the car just spins around randomly. The car rolls smooth and switching out the rear diff back to Solid has it driving just fine again. The t15 in the back is meshing fine and nothing rubbing, so not exactly sure what else would be the problem. Any advice on something to check would be greatly appreciated, haha.
@@GarageMiniRCUK Exactly that. I just modded out the combo red diff pack from Alibaba. I have everything meshing well gear wise but I think something is just goofy with my front. I currently have my setup in 98mm with a Megane RS body but it has the same behavior running without it. I need to reconnect the thing to the ICS and figure how to reset my trim on this EVO as I'm at like -100.
@@GarageMiniRCUK I have been liking the single take, no editing approach i have been doing as of late, much less work and i have enough automation in obs to cover most of the effects i need. any editing is always painful also like the shop transparency, really appreciate that (on the stock front)
Oh great! More stuff to buy. LOL
Hahahaha
awesomeness just done that mod took a hour to get the oe kyosho diff smoothed down so wheels and meshing is all just right and oh my days i done a figure 8 on me kitchen sideboard the control is so amazing and the figure of 8 was so tight .big thanks rc garage
Thanks 😁
REALLY appreciate the info. Thanks for the time and effort to grow the hobby.
Modding is good for the soul 😂👍🏽thanks for dropping by.
Over the top slow motion drifting footage starts at..
13.30
This is a great little mod but I wish it was around about 5 more this ago lol. Once I picked up my RWD drifter I can’t go back to AWD. Great video man, this is the stuff the community needs!
Thanks . I'm trying to find a way to Co-exist between the 2. Hopefully when our purpose built drift track is ready... I'll run counter steer awd and rwd in harmony.😁
Garage RC yeah that’s my problem, I don’t have a dedicated drift track so my space is super limited. I’m hoping once I have a full on drift track I’ll be able to crab walk & hold long angles, but for now it’s just a dream 😹
@@BMR3 it was all a dream..... I use to read "word up" magazine 😂😂😂😂😂👍🏽😜
Garage RC comin through with a B.I.G. reference 😹
Pinion recommendations for sliding on that center shaft? (Is the center drive shaft the same OD as a motor drive shaft... meaning pretty much any Kyosho pinion would work??)
I'll double check but the pinion i Used intially was off a motor for Mr03. So it should work. So any motor pinion should work.
Love the channel been thinking about getting into these cars for a long time and never have I'm not a younger person I'm 51. Is it pretty easy to pick up working on these I don't have the best vision in the world. I have been a member of your Instagram site but I just joined the Facebook one as well
I have freinds who are 60. Get a good magnification set up. Magnetic mat to catch screws. Start with mini z awd if not sure easier to get going. Less to go wrong.
@@GarageMiniRCUK thank you for letting me know I ordered already but all wheel drive Cal Sonic Nissan
yo sick video! do you happen to any cheap servos that are still decent?
Cheers bro For mini..z ?
Thank you so much for this. I've been looking into how to do CS for the past month and messed up a diff and some gears. This seems a lot easier with an extra rigid axle laying around. Do you know what shim size is for the axle if we do end up needing it? Just curious. The last diff I made had issues cause of the spacing.
Yes I will post the sizes of shims on the description for the video.
@@GarageMiniRCUK thanks a lot. I took the time to do it today with a kyosho rigid axle and a 15t aluminum pinion gear. I had to sand down the aluminum to length, but everything seems good now. This definitely fits better than having to do it with the default diff mod. I did this for my ma-03f that I converted to fwd. Thanks so much!!
Great stuff
Great awd mod video
Thanks! 👍
Brilliant informative video as always keep up the good work mate
Thanks 👍
Whats the big difference between this and rwd?
Rwd mini z cannot be drifted .the rwd is lighter and easier to turn
So, the gear pin should have more teeths?
More, teeth on drive shaft pinion. Less teeth on rear diff if possible.
Any chance you could answer a quick question? I just went through and did the CS mod here but my MA-030 is pretty much not drivable.
With a 5600k the car just spins around randomly. The car rolls smooth and switching out the rear diff back to Solid has it driving just fine again.
The t15 in the back is meshing fine and nothing rubbing, so not exactly sure what else would be the problem. Any advice on something to check would be greatly appreciated, haha.
Do you have the front one way diff.?
@@GarageMiniRCUK I do
The Cs mod needs the fixed diff on the rear. Otherwise it won't work , is this the Set up you are using?
@@GarageMiniRCUK Exactly that. I just modded out the combo red diff pack from Alibaba.
I have everything meshing well gear wise but I think something is just goofy with my front.
I currently have my setup in 98mm with a Megane RS body but it has the same behavior running without it.
I need to reconnect the thing to the ICS and figure how to reset my trim on this EVO as I'm at like -100.
You mean the red front one way diff? The Cs drift does require a claimer approach to the throttle. I'd need to see the set up.
Good video 👍
Thanks so much. 😁
Kind of glad you dropped the green screen was doing all sorts of odd things
Yes, it was just an experiment I was trying out. It has its uses. I'm just ordering a custom mat instead. It made editing a nightmare.
@@GarageMiniRCUK I have been liking the single take, no editing approach i have been doing as of late, much less work and i have enough automation in obs to cover most of the effects i need. any editing is always painful
also like the shop transparency, really appreciate that (on the stock front)
Wow great can I do it same for my MA 020 sport?
Yes you can but it's a little bit trickier . I'm doing a video on that soon.
@@GarageMiniRCUK How soon are we talking? Haha. Really interested to see this. Buying a MA-020 Gen 3 soon. Nice videos also! Keep up the good content.
I've done the mod, now finishing rwd video. That one is next!
Hi trying to check out your site but it keeps getting blocked and saying not secure. Trojan.
Hi, thanks, for the heads up , I'll look into it tonight.
Is rear diff from Eagle Racing?
I mean the one you modified
No the one I modified is kyosho locked rear diff.
@@GarageMiniRCUK Ah! Thx!