I'd love a video on building that bmw with carbon chassis. There isn't enough info on these cars. I wanna get a ma020 and convert it to a carbon chassis
I have the AMZ, but got it for racing, not drifting. I see you have the hyper bell steering. I found that the stock setup didn't have enough steering so I purchased the hyper bell kit. It did not work at all for me. I couldn't set the link lengths according to the instructions. The turnbuckles actually screwed right through the rod ends, ruining them. I just couldn't seem to get it adjusted properly.
hi , sorry to hear that its annoying when things like that happen it can drive you crazy . Once you finally set it up it works just fine . Although it is very fiddly . I have built about 10 AMZ and a few bz3 ,sz and gla cars , and maybe I should do a video about this issue . Where are you based ,can you get spares easily ?
@@GarageMiniRCUK I'm from Canada. Only place I can order from is really Miracle Mart. They are running out of the AMZ parts ... I guess because it is an older platform.
I'm sure the steering system uses the same size steering rods as the bz3 and sz and possibly gla . Let me check......sometines you find those parts you need from those cars.
Oooo nice p1 gtr ,thank you Garage RC for the awesome tips ,, i got atomic amz but couldn't find 94mm bodies anywhere so found 98mm p1gtr but needed wide kit aw the learning curb ,, i can hover a 3d rc airplane but cant drift for nothing ,having blast learning! You and Beaver best mini z rc on youtube,!
You can use washers on wheels to get a wider offset. I did that for the one in the picture. Check you set up. I needed a gyro at first, now I'm use to it don't use one. Keep at it 👍🏽
🙀 Can’t believe your selling the BMW, you sir are a mad man! I couldn’t part ways with a single body/chassis I have, I’m far too attached to my babies 😹
😂 I'm running out of space. I've been instructed by the "boss" 😂 I've got approximately 50 cars now. Even I can't keep up. So any I have 2 of I am letting go 😭.
Garage RC those are one of my favorite shells, so I totally understand. I had my eyes on a Phoenix R3 but I ended up getting a DRZ & a Super Skeeter conversion kit 🤦🏻♂️ If I could afford it I would have 3 sets of all my drift bodies, 1 for bashing, 1 for back up, & 1 to admire 😹 Cheers man, hope you & yours are doing well! I don’t remember if you did, but did you guys get a cat? I need to see drift cats British counterpart ☕️🇬🇧😺
I knew you would ask me 😂 . They were from China global market website. I can't find the link now but if you search on the website for amz alloy rims hubs or wheels. I will try and get you the link.
Hi, I had to search on ebay as its an old model... I'll see if I can find a link for one. I have one I keep In the box 😂.www.ebay.com/itm/133452423948 not cheap 😂
![Lethal Company Music Video 🎵 "Follow The Orders" [VERSION A]](http://i.ytimg.com/vi/QeooZB4Z7RA/mqdefault.jpg)
Yes I know I have spelt "drifting" incorrectly on the intro... My new touch typing skills need some work. 😂
I'd love a video on building that bmw with carbon chassis. There isn't enough info on these cars. I wanna get a ma020 and convert it to a carbon chassis
I have the AMZ, but got it for racing, not drifting. I see you have the hyper bell steering. I found that the stock setup didn't have enough steering so I purchased the hyper bell kit. It did not work at all for me. I couldn't set the link lengths according to the instructions. The turnbuckles actually screwed right through the rod ends, ruining them. I just couldn't seem to get it adjusted properly.
hi , sorry to hear that its annoying when things like that happen it can drive you crazy . Once you finally set it up it works just fine . Although it is very fiddly . I have built about 10 AMZ and a few bz3 ,sz and gla cars , and maybe I should do a video about this issue . Where are you based ,can you get spares easily ?
@@GarageMiniRCUK I'm from Canada. Only place I can order from is really Miracle Mart. They are running out of the AMZ parts ... I guess because it is an older platform.
I'm sure the steering system uses the same size steering rods as the bz3 and sz and possibly gla . Let me check......sometines you find those parts you need from those cars.
@@GarageMiniRCUK you should totally do a amz build video.
Oooo nice p1 gtr ,thank you Garage RC for the awesome tips ,, i got atomic amz but couldn't find 94mm bodies anywhere so found 98mm p1gtr but needed wide kit aw the learning curb ,, i can hover a 3d rc airplane but cant drift for nothing ,having blast learning! You and Beaver best mini z rc on youtube,!
You can use washers on wheels to get a wider offset. I did that for the one in the picture. Check you set up. I needed a gyro at first, now I'm use to it don't use one. Keep at it 👍🏽
🙀 Can’t believe your selling the BMW, you sir are a mad man! I couldn’t part ways with a single body/chassis I have, I’m far too attached to my babies 😹
😂 I'm running out of space. I've been instructed by the "boss" 😂 I've got approximately 50 cars now. Even I can't keep up. So any I have 2 of I am letting go 😭.
Garage RC oh my gosh! 50 cars is a massive fleet, that’s awesome man but at the same time, gotta keep the boss happy 😂
I have 3 Audi r8 phoenix yellow cars. Don't ask..... I'm not sure how that even happened. 😂
Garage RC those are one of my favorite shells, so I totally understand. I had my eyes on a Phoenix R3 but I ended up getting a DRZ & a Super Skeeter conversion kit 🤦🏻♂️ If I could afford it I would have 3 sets of all my drift bodies, 1 for bashing, 1 for back up, & 1 to admire 😹
Cheers man, hope you & yours are doing well! I don’t remember if you did, but did you guys get a cat? I need to see drift cats British counterpart ☕️🇬🇧😺
Lol still undergoing tests(allergy) . To see if Mrs can tolerate a Russian blue or something. 🙀
Hey bud, do you think the Atomic AMR 2WD chassis is okay for a beginner to begin drifting? I'd appreciate your thoughts.
Amr is no good for drifting . I’ve tried .
Do you still build and sell 🤔
Thanks again for imparting your knowledge...! Soooo what wheels are on the BMW?
I knew you would ask me 😂 . They were from China global market website. I can't find the link now but if you search on the website for amz alloy rims hubs or wheels. I will try and get you the link.
Garage RC 🤣🤣🤣😂😂😂😂 Thanks!
@@GarageMiniRCUK I would also like to know that link for the alloys great video. Gonna check out amz rims on the net now
China global market place www.chinaglobalmall.com/
www.chinaglobalmall.com/products/545793062110
www.chinaglobalmall.com/products/545793062110
Where can I get this body?
Kyosho mini z body 98mm.
@@GarageMiniRCUK the BMW?
Hi, I had to search on ebay as its an old model... I'll see if I can find a link for one. I have one I keep In the box 😂.www.ebay.com/itm/133452423948 not cheap 😂
@@GarageMiniRCUK damn. $180 wow
I know I paid $120 for last one and I saw one for $50 only 1 year ago 🤦🏽♂️