15:52 one thing that worked wonders in the MA020, for me, was to just add weight on the inside of the body. (Coins with tape, for example, or tungsten if you want to get fancy. 😂 ) Use multiple small scales to determine the weight balance and add accordingly. 👍 I personally don’t like the wide rears, but that’s probably because my slippery hardwood floor isn’t as slippery as tiles or glass, so I prefer 90mm with narrow rear and LF5.
Yoooo! Yes! On my awd i have a certain skrew along the door, trimmed flat bracket in the front corner, also one nut in rear bumper. The first one i did had 100% in door. Felt a little weird. 2nd one with 3 weights is better imo. So happy to see im not alone in the left right balance
I don't have a kyosho untill my Dnano arrives. I know Dnano are discontinued and are rare but I would love to see you or Beaver do a review of the Dnano just a shame it won't happen.love both channels and the contents of your videos
@@GarageMiniRCUK cool I might see what you got motor position i mean and your overall thoughts and obviously a comparison to it's big brother, I know mini z are said to be a quality product but I will not know how good a Dnano is in comparison. As I do not own a mini z thanks for replying!
Great video, I did the cs mod, I have a bit of clicking (I tried to make sure the cog was on straight, but perhaps the hole wasn't perfectly straight) it seems to run ok though, just a slight bit louder). I have found the car far more difficult to control, it seems to be more in control of me... The gyro is at half way where prior it was only 25%...is this normal? Do I need to relearn how to drive it again?
Yes. I have tired this and it works. Only thing was I didn't want to make it inaccessible for everyone. I'm perfecting the print and will do an stl file. 👍🏽😁Unless you do it first.
@@GarageMiniRCUK tnx, Btw i am looking into a rwd drifter and i am unsure what to get; drz v2 , xrx, hgd1. Don’t wanna get a gld saw too many bad reviews about them, actually about the xrx too 😳🤔
motor mount is stock . gear ratio I gave on the evo cs drift video . its the same as that . rear and front diffs are standard only the the driveshaft pinion to ear wheels was changed from 8t to approx 16t from memory but id have to watch the evo video to check .
15:52
one thing that worked wonders in the MA020, for me, was to just add weight on the inside of the body.
(Coins with tape, for example, or tungsten if you want to get fancy. 😂 )
Use multiple small scales to determine the weight balance and add accordingly. 👍
I personally don’t like the wide rears, but that’s probably because my slippery hardwood floor isn’t as slippery as tiles or glass, so I prefer 90mm with narrow rear and LF5.
Yes that’s true over motor side
Yoooo! Yes! On my awd i have a certain skrew along the door, trimmed flat bracket in the front corner, also one nut in rear bumper. The first one i did had 100% in door. Felt a little weird. 2nd one with 3 weights is better imo.
So happy to see im not alone in the left right balance
Beautiful what you add to miniz 💪🏽👍🏼
Yes although for this mini z modification i think it works better in ma030.
cool. will try it out.
Hii! What pinion and spurgear did you use for this mod?
Thank you for the great 👍 video
Great
Thanks 👍🏽 😁
I don't have a kyosho untill my Dnano arrives. I know Dnano are discontinued and are rare but I would love to see you or Beaver do a review of the Dnano just a shame it won't happen.love both channels and the contents of your videos
I have one 👌might have a review for fun
@@GarageMiniRCUK cool I might see what you got motor position i mean and your overall thoughts and obviously a comparison to it's big brother, I know mini z are said to be a quality product but I will not know how good a Dnano is in comparison. As I do not own a mini z thanks for replying!
I realize it is kind of off topic but does anybody know a good site to stream new tv shows online?
@Cannon Gregory Flixportal :P
@Harper Ira thank you, signed up and it seems like they got a lot of movies there =) I really appreciate it !
Great video, I did the cs mod, I have a bit of clicking (I tried to make sure the cog was on straight, but perhaps the hole wasn't perfectly straight) it seems to run ok though, just a slight bit louder).
I have found the car far more difficult to control, it seems to be more in control of me...
The gyro is at half way where prior it was only 25%...is this normal? Do I need to relearn how to drive it again?
Yes . It's way more difficult to control
Could you add links to the oneway diff you used please? Thank you, great video
Yes I will, its on my site. I'm just trying to sort an issue with international shipping before I put the link up.
@@GarageMiniRCUK has the issue been sorted? This is an awesome video & couple help funnel people to your website 🤑
Do you think it would be possible to 3D print the pinion gear? It would take out a lot of the labor
Yes. I have tired this and it works. Only thing was I didn't want to make it inaccessible for everyone. I'm perfecting the print and will do an stl file. 👍🏽😁Unless you do it first.
@@GarageMiniRCUK probably wouldn’t be a bad idea to sell them on your website, id definitely pick one up.
😂 I really have so much stuff to add to the site... I need a few months off... But that's a great idea... Just need to perfect the quality! 😁
@@GarageMiniRCUK Will be waiting for that STL. Just picked up a Rigid Axel. Can't wait to see how it goes.
Would i benefit from just putting in the one way diff and solid axle diff? Would the car drift better?
Yes or just lock you diffs.
@@GarageMiniRCUK tnx,
Btw i am looking into a rwd drifter and i am unsure what to get; drz v2 , xrx, hgd1.
Don’t wanna get a gld saw too many bad reviews about them, actually about the xrx too 😳🤔
I wonder, test drving no gyro?
Yes
So if i want to make a cs gear for the ma030evo.. just pull out the pinion and just use a bigger pinion right?
Fixed rear diff and one way front diff. Need to adjust fixed rear so the bigger pinion fits. I think I gave details in ma030 Cs drift video
@@GarageMiniRCUK yup just found it on your channel..watching it right now!
I think I'll just do this mod with a lathe
Good idea. I'm getting into metal work now. Hoeofully be able to mill my own metal parts soon. Good luck.
I locked my stock diff. Can I shim it if counter steer it?
If you need to make a counter steer you can shim, but also may need to adjust plastic to make enough space for a bigger pinion
What motor mount and gear ratio did you use?
motor mount is stock . gear ratio I gave on the evo cs drift video . its the same as that . rear and front diffs are standard only the the driveshaft pinion to ear wheels was changed from 8t to approx 16t from memory but id have to watch the evo video to check .