HUBSAN ZINO & ZINO PRO - QUICK & EASY HOW TO TAKE IT APART
HTML-код
- Опубликовано: 5 июл 2024
- In this video I show you how to take apart the Hubsan Zino Pro quickly which is the same as the Zinio with very little differences. I always give tips along the way and try to inform you with as much info as possible.
For further help and support join my group: / hubsanqc
HUBSAN, hubsan zino, hubsan zino pro, hubsan x4, hubsan drone, 3 axis gimbal, how to basic, QUADCOPTER, QC GUY, HOW TO FIX HUBSAN ZINO, HOW TO TAKE APART HUBSAN ZINO, HOW TO TAKE APART ZINO PRO, HOW TO TAKE APART HUBSAN ZINO PRO, HUBSAN QUADCOPTER, HUBSAN HOW TO FIX, HOW TO FIX, HUBSAN 3 AXIS GIMBAL, HUBSAN ZINO CALIBRATIONS, HUBSAN ZINO REPAIR, HUBSAN ZINO PRO REPAIR 
Наука
Quick and easy version meaning shut up and just take it apart Chris.... 😂
A little less talk and more action!
You have been such a huge help.
I’m new to this sport and got a zino pro.
This video really helped me.
I was flying in tight area trying to do some grad pics for my daughter, hit a limp and went down into the creek. It was under water for about 5 seconds. Brought it home, watched your video and blew it out with air. Put in fabric bag with a bunch of silicon bags for three days.
It still flys perfect to this day.
Again, THANKYOU.
Although I am a Mavic Air 2 pilot, I really was glad to see the video of the repair of the Hubsan Zino Pro for those who fly the Hubsan. Very informative and concise. Also, glad to see you back on You Tube.
Nice video
Thanks
thanks you a lot. i finnaly can open my zino pro +, and find a damage in my gimbal cable.. do you know if the zino pro cable work on zino pro + ?
Same cable 👍🏻
Hi Chris, my Zino camera gimbal will go back by itself to default look ahead position whenever I set it to the maximum look down position in flight, but not when my quard is on the ground
Ptyty I have a group for troubleshooting problems. This would be nice to see in video along with anything you might have done like crash, update firmware or replaced something prior to this.
Hey QC GUY, hope you are doing well, I recently took apart my zino pro plus this way to see if the gimbal cable was disconnected because the gimbal would not calibrate and then i put it back together and it will not start at all, I was wondering if you have any insight on what might’ve happened or what I can do to fix it, Thanks!
One of two ribbon cables came loose buy the power button most likely.
I have a Hubsan Zino, and a DJI. I can always count on the Zino to fly, but not the DJI ...
Hi friend Thanks for the video, I just have a question where can I buy the husan zino pro drone fan. Mauritius.
I don’t see them anywhere in my doing a quick search.
I have some but if you’re outside the US it may not be worth the shipping.
Obrigado @@QCGUY Sim estou em Portugal Arquipelago dos Azores ai será muito dispendioso o transporte.
Hi Chris, how's it hanging there? :) I finally got RC for Zino Pro Plus, still waiting for battery adapters...Anyway I started "mean machine" and "surprisingly" got Error 0X2000 and "gimbal sensor error" ... I watched yours error video but where is gimbal sensor? Any help? Thanks in advance, greetings from Serbia
It’s your gimbal cable. It’s marked as motor.
@@QCGUY Thanx a lot, ordering gimbal (motor) cable
Hey QC guy! I have a Hubsan Zino Pro. The front left propeller is spinning but won't fly. What do you think about that? Do you know what's wrong with my Hubsan Zino Pro?
That doesn’t tell me enough but if it’s not spinning up to speed then most likely the ESC is bad. Possibly motor as well.
Thanks! I'll try to replace the motor
Good morning Chris. I had texted you a few months ago and I was going to mail you my zino pro but due to money issues ( still unable to afford it) so I've been watching your repair videos to do it myself. Heres what's the problem is. When I've bounded the zino and it's ready to fly I've been having an on and off again issue with gimbal control. Sometimes it works and then gimbal cover remover warning appears and I have no response to gimbal wheel. This is an intermittent problem . Does it sound like a loose gimbal plug? Sincerely William Horsley
William Horsley It could be different things but yes that sounds like the first place to start.
Thank you Chris. Have a great day. I really appreciate your time and advice it helps so much that I feel confident in disassembly the Zino now putting it back together is the other thing I need to learn! Sincerely William Horsley
Good day! I have such a problem with my Habsan Zino pro.When taking off, it immediately falls,today it fell three times.All kalibrovki performed according to the instructions .Can you tell me what's wrong with my drone ?
Use a different battery. If you don’t have one buy one. If it does it on every battery you have then that is odd and you should post a video in a Facebook group for help.
Hi
I've bought a zino pro plus and I can't pair it to my phone.
When I Turn on the controller, the lights are always flashing, they never stop.
What can I do?
Thanks
You join my group and post a brief post with pictures and or video. Thanks
facebook.com/groups/HubsanQC/
Hey. My zino pro doesn’t make the entire music when i turn on the drone and when o let go of the power button, it just shuts off. What could be the issue?
Go to my group…I can’t answer and solve all your problems here.
facebook.com/groups/HubsanQC/?ref=share_group_link
Hello, thanks for your video, I bought a Zino pro plus and it shows me error 0x2000 on the screen, when searching the web everything indicates that it may be the disconnected gimbal cable, which is very annoying since the drone is new. You have a repair video for the Zino pro gimbal that will help me see if I dare to disarm, thank you very much.
Sounds like the cable to me 👍🏻
I have the replacement videos in my library here on my channel. Thanks
@@QCGUYFriend, if I just want to check the motor cable connector is it necessary to remove the gimbal? or just by removing the upper part of the drone I can check it, because it seems to me that it is disconnected since there is no response when it turns on.
@@enelcaminoconmidron if it is a total no response then it can only be the cable connection at the main board inside or the cable is done with.
That’s if it’s a cable issue and not hardware issue.
@@QCGUY Thank you very much, in fact there is no answer whatsoever in the gimbal, and for that reason I think that only by removing the upper part I can check the connector cable, I really appreciate your help.
@@enelcaminoconmidron Good luck 👍🏻
I have a hubsan zino pro plus, it's give me code 2000, what is the problem?
Replace the gimbal cable
Hi Chris. I was wondering whether I could have a chat without you about my Zino, and answer a few questions. I'm from england. I did attempt to send you an email. My full name is Paul Tyrer. Thanks 👍
Sorry Paul I have finally replied to your email. Been sick 😷
Let me show you how to take a Zino apart.
.. Place the Zino on the floor then take your right foot and stomp repeatedly until it's the pile of shit that it is....
Do you need something else or do you just like to dump your crap on all my videos?