Hubsan Zino Gimbal Reset Quick Gimbal Fix Gimbal Cable Re Seat
HTML-код
- Опубликовано: 21 дек 2019
- This is the second time I have saved my Gimbal after a crash.
The first crash was potentially catastrophic. I'm very lucky.
First error: " Gimbal Angle Sensor Error".
Second error when calibrating the Gimbal: " Request Timeout"
The Hubsan Zino video has been shot in 4K and uploaded in 1080p 30 frames per second (for fast uploading and rendering with my editor.)
The Zino does do nice 4k with vivid colours too.
For contracting work go here to contact me on my contact page:
bravo3cm.wixsite.com/droneqld...
To purchase the Zino, go here:
www.banggood.com/custlink/vv3...
Music: www.bensound.com
Good job! The rubber piece you pushed with the screwdriver is the actual plug at the end of the ribbon cable. There are 4 in total on the camera/gimbal and your very lucky because if pressed a little too hard or off to the side that plug breaks loose from the ribbon cable and it's done till you can get a replacement. The word "reset" is what the Idunno Quadcopter guys get confused because they are and misinform others correctly so I was happy to hear you say the way I originally word it.....Re-seat. Great job!
Nice review of the Zino, which is an awesome quad. Glad to see how it can be repaired if that paticular problem arises...Enjoy it my friend! Subbed your channel as well!
Thanks for the positive comment and subscribing.
The reset fix has worked twice for me, I'm pretty happy about that.
My drone fell from the sky when I let the battery run down. The gimbal stopped working but I tried what you said and now it is all working as before. Saved me what I thought would be a fortune
Yes, my Zino dropped into the water about one metre from shore unfortunately. I think one of my batteries was faulty because it happened on land too.
thanks a lot man , great video , help me a lot
Wow this got 3k views good job
This is the best demonstration of the cable reset I've seen. Excellent work. 👍 Also, just for reference, I've had the best luck with gimbal V3.0.2.2.
Wow, that's a great compliment. Thank you very much. I'm obviously new at this. You've inspired me to improve my content. I think it's time I subscribed to your channel. I've been watching it so much anyway!
Great video! I did everything like you did but everytime after reset gimball calibration is failing. Any solution? Thanks!
Its just a plug, not a button, sometimes it losen bei the Crash, the errorcode is: x0004 and it helps when you push this plug in the right place back, thats it.
Yes, I use the word "button" loosely. Thanks for your comment. Can you tell me how to bring up error codes on an error log? I was describing the errors that were displaying in the app. eg. "Gimbal Angle Sensor Error" and "Request Timeout".
@@droneqld go to you tube Chanel : QC GUY they have all important information about Zino. So you needet a right Callibration vor your Gimbal, it have about 6 Steps, after that it's perfekt. Whatch the QC GUY Video and he have the Link for this Programm.
@@droneqld if you Not find the right Video, give me you e Mail adress and i send you a right link
@@droneqld unfortunately you cannot save any errorcodes , the app shows the errorcode as long as you have on, after you fixt the Problem, its not possible to save it
@@droneqld you can send a flight log direktly to Hubsan if it help s you
That is not a reset. That is to fix a bad Contact.
I'm experiencing the same issue. My gimbal isnt leveled. And I had a crash. I wouldnt call it a severe crash like you described yours. But heres another thing. My camera or gimbal doesn't move up or down when I power it on.
You can try the cable reseat but you mght have a broken connection somewhere. Check out the QC Guy on youtube he has left a comment on this page. He is the Zino repair expert and has several videos to back it up and show you how to do the repairs. Also, invest in the gimbal calibration gimbal cover. www.banggood.com/Hubsan-H117S-ZINO-PRO-RC-Drone-Quadcopter-Spare-Parts-Gimbal-Calibration-Cover-p-1612439.html?rmmds=search&cur_warehouse=CN
It's well worth the money. You can find instructions for that from the QC Guy.
My horizon level is unlevel... some suggestions? Already calibrated horizontal and gimbal. No crashes. Thanks
Yes, you may need to see this from the QC Guy ruclips.net/video/Apv7-s6Ftds/видео.html
have you solved you problem. I have the same.
What error code did you get? Was it 0x2000?
Hello Friend. Man I really need your help let me tell you my story: I received my Drone Zino yesterday, I called and the red light is blinking I have been searching a lot and it seems that it is not releasing the signal from the wi-fi and it really is not because on the cell phone no appears my phone can read 5g. I can connect the cell phone to the control normally only that the cell phone doesn’t show the Zino network there ... I saw several videos talking about this problem and they all indicate that it’s a problem in the flat only that the Drone came in brand new I just opened it and even did a boxing I just can't link here but RUclips and block that comment for you. have any idea what you can do because the Drone as I said came zero new just took it out of the box and called it is ok the cute app turned on the phone and already gave this problem right away and I who will stabilize normal ... Thanks I await response
I'm not sure exactly what you mean but I think you are having issues connecting the wifi.
As far as I know you don't need the wifi connection at all. You simply connect your phone to the cable that goes to the controller. You will only need the wifi connection if you want to fly without the controller but I suggest you always use the controller instead. You just need to follow the set up instructions step by step. Ignore the wifi connection.
I have a sever wiggle with gimbal during start-up and then reads 00400 error. I've done QC Guy's recalibration and it takes quite a few times til error message disappears (gimbal under restraint) but Everytime I have to do this reset of gimbal. QC GUY said to use a computer to go into ground station to fix problem. Any easier suggestions for a old guy who has 0 computer skills. Just subbed. Sincerely William Horsley
IF you watch the QC Guy video to use the ground station, I suggest pausing the video at every step.
I highly recommend trying it. If you get someone to help you with the computer that may be better. It won't take more than 1/2 hour.
how can i resolve this error 0x0080? I have already tested other firmwares and the error continues. Did it break the flex cable or some part? help me please
Check out the QC Guy. He has left a comment on this page.
Нихуя не понял, но очень интересно.