I commend you because this tutorial was better than the one you made before because it explains how to insert each corner and you're not saying to first put all the corners in the top layer. However, I would argue that this method isn't very much more efficient than the beginner method because you are still putting pieces in place (the middle layer edges) to only have to later take those pieces out to pair with other pieces ( the first layer corners). That's exactly what the beginner's method does, but the pieces are reversed (first you insert the first layer corners, then you remove them to pair up with the middle layer edges and insert them together). If you count the total F2L turns made for this method and the beginner method for the same scramble, I would imagine that the number would be very close. However if you used the Edges-First Keyhole method, which this is very similar to, you would cut the total F2L turns down by close to a third or more. I sent you an email with some references on the Edges-First Keyhole method last week. I'm not sure if you got it (maybe it went to your spam folder). Anyway, this is a complete method tutorial this time so good job. However, it requires more algs then the beginner's method without the added benefit of having a significant lower move count. Please take a look at my references and consider doing a Edges-First Keyhole method tutorial.
@@THECUBER2023 if your edges 1st keyhole is as thorough as this one was, I will be recommending it to a lot of people. Edges First Keyhole is my preferred method of solving and I avg just over 20s. I have some bad habits that I could probably work on to get my avg down to 20s, but I'm a much older cuber and things that come easy for you younger people don't come as easy for me. However, I would love to finally have a decent tutorial on the method that I use to recommend to people. I look forward to seeing it.
Been giving this a go today. As someone who only started cubing a couple of weeks ago I quite like method this as I'm finding it fairly intuitive. So far seems slightly faster than beginners method as I find I'm not having to redo solved pieces as much
Very glad to hear this tutorial helped!! I will release another wat of solving F2L soon!! This is the teaser ruclips.net/user/shorts3N8UECxqBJI?feature=share If you are a beginner, this method, called EFK will probably get you to sub 20-30 range very quickly
First Comment! 🎉❤ This is so useful and I finally know F2L. I’ve tried every F2L tutorial on RUclips at this point, this is the one that made me learn F2L. Even J Perm couldn’t save me lol!
My guy, this ain't f2l, this is just another way of doing the beginners method because instead of putting the corners in first, he is just putting the edges first and then solving the corners.
@@THECUBER2023but this is layer by layer. I'm still a beginner learning cfop and as far as I know F2L is solving the first 2 layers together (corner + edge) 😅 Doing it as in the video is the same than doing the singmaster way because you solve 1 part first and then the other. I'll check your other f2l tutorials though because you teach really well 😊
oh wow... before i used to do it in like 1 min 30 sec know im sub 40 and with a little more practice i WILL get in the sub 30's or 20's ad maybe even 10 this vid was exactly what i was looking for
Thanks, worked for me after about 30 minutes of watching and 10-12 solves. Easy to remember as it can rely on muscle memory. Where does the name come from?
really helpful fro beginner f2l cubers like me. but isnt this method the same thing as beginners method but you do the second layer first then the first layer?
Whenever I try to go fast when doing F2L I just solve the corner and then use the 2 algorithms for the edge in front or on the right or I just use the beginner method all the way since I can do it much faster This should help me more since it's just 3 algs and not the 41 algs for all F2L cases
you don't have to learn 41 algs for F2L, because F2L is intuitive, you can figure out every single case, but if you want to be faster you have to know advanced F2L
U have to practice using f2l and at first the beginners method will be faster but this method will at max get u to sub 15 which is alr a long shot, plus f2l had 90+ cases but i can learn almost everyone intuitively in a matter of months, ur just finding a way to not learn f2l cuz u don't want to put the effort in.
This isn't a very efficient method since your just taking out an already solved peice to pair it up. Would it not make sense to just do pseudo slotting? I mean these cases are decent to learn anyhow, since you can force them in the cross solve but it's less of a solid way of always solving all of the corners and just an easy way to learn 3 f2l cases.
Ok i taught myself this method of f2l 5 months ago by myself and I thought i made a new method of f2l that is easier for beginners to learn after j perms tutorial
Guys this is not f2l he is just solving the edges first instead of the corners, just like in the beginners method where u solve the corners and then the edges. Go learn f2l if u want to get better.
@@THECUBER2023 I am not saying that, i am just saying that this is the exact same method as the beginners method, bcz ur just changing which part of the f2l u put in first.
@@THECUBER2023yes, it actually is, because you're working your way up. it's an easier concept for beginners to understand - you're building on to what you've built. in this, to a beginner, you're solving seemingly random pieces then doing stuff magically to solve both. you could also make the method faster by just solving 3 edges, teaching the basic corner insert, and keyholing the corners. then solve the last slot with beginner's. this just seems like an awkward inbetween, where you're not saving much time, and it's somewhat easy to learn - but it seems like you are getting better, but you're actually doing the same stuff, just in a slightly different way.
F2L is the hardest part to get good and consistent at, so this really simplifies it! Thanks for another great video!
I commend you because this tutorial was better than the one you made before because it explains how to insert each corner and you're not saying to first put all the corners in the top layer. However, I would argue that this method isn't very much more efficient than the beginner method because you are still putting pieces in place (the middle layer edges) to only have to later take those pieces out to pair with other pieces ( the first layer corners). That's exactly what the beginner's method does, but the pieces are reversed (first you insert the first layer corners, then you remove them to pair up with the middle layer edges and insert them together). If you count the total F2L turns made for this method and the beginner method for the same scramble, I would imagine that the number would be very close. However if you used the Edges-First Keyhole method, which this is very similar to, you would cut the total F2L turns down by close to a third or more. I sent you an email with some references on the Edges-First Keyhole method last week. I'm not sure if you got it (maybe it went to your spam folder). Anyway, this is a complete method tutorial this time so good job. However, it requires more algs then the beginner's method without the added benefit of having a significant lower move count. Please take a look at my references and consider doing a Edges-First Keyhole method tutorial.
I am working on edges first keyhole. I received your email. It was great!! Next week edges first maybe?
@@THECUBER2023 if your edges 1st keyhole is as thorough as this one was, I will be recommending it to a lot of people. Edges First Keyhole is my preferred method of solving and I avg just over 20s. I have some bad habits that I could probably work on to get my avg down to 20s, but I'm a much older cuber and things that come easy for you younger people don't come as easy for me. However, I would love to finally have a decent tutorial on the method that I use to recommend to people. I look forward to seeing it.
@@mlbrown76 Yes I will make that my next video!!
👇🏻 If you needed this very much!
Finally...! This is "thee" video, this is where its at! Great Tutorial, makes perfect sense, easy to learn, not at warp speed either! Nice!
Been giving this a go today. As someone who only started cubing a couple of weeks ago I quite like method this as I'm finding it fairly intuitive. So far seems slightly faster than beginners method as I find I'm not having to redo solved pieces as much
Very glad to hear this tutorial helped!! I will release another wat of solving F2L soon!!
This is the teaser ruclips.net/user/shorts3N8UECxqBJI?feature=share
If you are a beginner, this method, called EFK will probably get you to sub 20-30 range very quickly
First Comment! 🎉❤ This is so useful and I finally know F2L. I’ve tried every F2L tutorial on RUclips at this point, this is the one that made me learn F2L. Even J Perm couldn’t save me lol!
Thanks!!! I’m very glad to hear this, but regular or advanced F2L is just better. Did you check out my advanced F2L videos? ❤
@@THECUBER2023 No not yet but it’s probably great like this tutorial! I will definitely use advanced F2L once I get a feel of regular F2L
My guy, this ain't f2l, this is just another way of doing the beginners method because instead of putting the corners in first, he is just putting the edges first and then solving the corners.
@@JOHNSONNBOSS True, Regular CFOP is better, this is F2L. I am teaching you how to solve the first 2 layers. Just with a beginner friendly way.
@@THECUBER2023but this is layer by layer. I'm still a beginner learning cfop and as far as I know F2L is solving the first 2 layers together (corner + edge) 😅 Doing it as in the video is the same than doing the singmaster way because you solve 1 part first and then the other. I'll check your other f2l tutorials though because you teach really well 😊
oh wow... before i used to do it in like 1 min 30 sec know im sub 40 and with a little more practice i WILL get in the sub 30's or 20's ad maybe even 10
this vid was exactly what i was looking for
Ur welcome!! So glad I could help 😊
Sorry, I didn’t fully understand whether this method of setting two layers is better than the intuitive f2l?
Thanks for the great video I was able to complete f2l for the first time today
thanks man this is really helpful, you deserved more sub!
🙏🙏, more videos coming soon!!
This video is great! So easy to understand!
This is amazing. Thank you so much. Brilliant tutorial
Your welcome!!
Very good!! Interesting.
Thanks!!
Thank you bro I got sub 30 by doing this
BRO THX I REALLY CANT DO F2L BEFORE WACTHING YOUR VIDEO THX ALOT MAN IMA SUB TO YOUR CHANNEL
Lets gooo 😂 Hey dude remember me I asked when you would post this lmao
Of course!! Have a nice day!!
What if you solved 3 edges first then use keyhole for the corners for those pairs then solve the last pair using the beginner method technique
@@kewbing that’s a method called EFK (check my other video on that method)
Thanks, worked for me after about 30 minutes of watching and 10-12 solves. Easy to remember as it can rely on muscle memory. Where does the name come from?
Thanks! This is a cool way to do it
Really made it easy bruv, we still waiting for your OLL and PLL tnx man
really helpful fro beginner f2l cubers like me. but isnt this method the same thing as beginners method but you do the second layer first then the first layer?
Yes
I saw the other vid today it helps so much I went from around 55 to sub 35 every time
great video I thought it was more advanced then f2l normally
thank you
Whenever I try to go fast when doing F2L I just solve the corner and then
use the 2 algorithms for the edge in front or on the right
or I just use the beginner method all the way since I can do it much faster
This should help me more since it's just 3 algs and not the 41 algs for all F2L cases
you don't have to learn 41 algs for F2L, because F2L is intuitive, you can figure out every single case, but if you want to be faster you have to know advanced F2L
U have to practice using f2l and at first the beginners method will be faster but this method will at max get u to sub 15 which is alr a long shot, plus f2l had 90+ cases but i can learn almost everyone intuitively in a matter of months, ur just finding a way to not learn f2l cuz u don't want to put the effort in.
les goo ur the best my guy
Thanks
This isn't a very efficient method since your just taking out an already solved peice to pair it up. Would it not make sense to just do pseudo slotting? I mean these cases are decent to learn anyhow, since you can force them in the cross solve but it's less of a solid way of always solving all of the corners and just an easy way to learn 3 f2l cases.
It’s for beginners but yes you are right
i thought this is the new discovery for f2l and got very excited. next time can you put "for beginner" in the title?
Okay!! Thanks for the feedback!!
I love when these teachers go really slow until the part you need to see slow and then they turn into timed speed competition.
Not to be toxic, but you are solving edge then corner, this is essentially the same me thing as beginner f2l but still good
What do you consider beginner F2L?
great video
Glad you enjoyed it ❤
Ok i taught myself this method of f2l 5 months ago by myself and I thought i made a new method of f2l that is easier for beginners to learn after j perms tutorial
Yes!! It is indeed a great method for beginners.
8:56
Guys this is not f2l he is just solving the edges first instead of the corners, just like in the beginners method where u solve the corners and then the edges. Go learn f2l if u want to get better.
F2L is first 2 layers, not necessarily the way CFOP advanced F2L is done.
@@THECUBER2023 I am not saying that, i am just saying that this is the exact same method as the beginners method, bcz ur just changing which part of the f2l u put in first.
Zeta slotting is more faster than the beginner method
@@xLolz1 That is because the look ahead in zeta slotting is easier than the beginners method.
which makes it a faster method for beginners who don't necessarily want to get sub 10. Not everyone is going for the record.
This f2l method is soo easy. I understand it
Glad you liked it!!
8:05
Now im on the right place 😂 🎉 👍🏼
👍
All this video is doing is convincing beginners they know f2l. Any beginner looking at this should just put in the effort and learn real F2l.
Yes learning F2L is the best thing to do
I don't understand. You intentionally complicated the LBL method to solve the edges first, then the corners?
You think LBL is simpler?
Well, I hold the WR since 2017 with LBL method, so...@@THECUBER2023
@@THECUBER2023yes, it actually is, because you're working your way up. it's an easier concept for beginners to understand - you're building on to what you've built. in this, to a beginner, you're solving seemingly random pieces then doing stuff magically to solve both. you could also make the method faster by just solving 3 edges, teaching the basic corner insert, and keyholing the corners. then solve the last slot with beginner's. this just seems like an awkward inbetween, where you're not saving much time, and it's somewhat easy to learn - but it seems like you are getting better, but you're actually doing the same stuff, just in a slightly different way.
I am so pleased that you learn this method very slowly and precisely
Proudly subscribed
Thank you very much
🫡🫡🫡🫡🫡⭐⭐⭐⭐⭐
8:42