How to Install a Garage Door Lock || Prime-Line Indoor Sliding Deadlock

Поделиться
HTML-код
  • Опубликовано: 25 янв 2023
  • This is a simple and easy project where if everything goes well, it should only take five to ten minutes to complete. Now, you might be wondering, “why do I need a garage door lock?” If you have to manually open your garage door, then a lock is necessary. But, if you have automatic garage door openers, then adding a lock is optional. However, it can be an extra safety feature to ensure no one can open your garage door. A lot of people don’t know that your garage door openers are pretty easy for criminals to hack, especially the older door opener systems. The only thing that guarantees your door(s) can’t be opened from the outside, is a good, old-fashioned door lock to deadbolt it closed.
    Garage door opener removal: • How to Remove a Garage...
    ​‪@PrimeLineHowTo‬ Garage door lock: www.amazon.com/Prime-Line-Pro...
    Get Canva and start creating! (not an affiliate, just love this site!) www.canva.com/join/tlq-twc-qzh
    Come say hi on Instagram! / thediygrunt
    Website coming soon.
    CAMERA GEAR USED:
    ○ Camera - www.amazon.com/Sony-Content-C...
    ○ Mic - www.amazon.com/Rode-VideoMicr...
    ○ SD card - www.amazon.com/Sony-Content-C...
    ○ SD card/USB adapter - www.amazon.com/gp/product/B08...
    ○ External Hard drive - www.amazon.com/Seagate-Portab...
    ○ Handheld tripod - www.amazon.com/Newmowa-Portab...
    ○Tripod - www.amazon.com/UBeesize-Bluet...
    DISCLAIMER: Links included in this description might be affiliate/referral links. If you purchase a product or service with the links that I provide I may receive small compensation. There is no additional charge to you! Thank you for supporting The DIY Grunt! Be sure to subscribe, like this video, and leave us a comment! Keep an eye out for our next video 😊
    #primelinelocks #garagedoordeadbolt
  • ХоббиХобби

Комментарии • 15

  • @AndrewGreeneAg
    @AndrewGreeneAg 7 месяцев назад +6

    I appreciate you showing the mistake!!

  • @gearedupkim9516
    @gearedupkim9516 9 месяцев назад +4

    Thank you for showing the tapping out of the notches in the rail that the lock slides into. Now I know how to do mine.👏🏻 👍👍

  • @rhodachandler4277
    @rhodachandler4277 Год назад +2

    You highlighted all of the same problems I encountered 😂😂😂. We did it though! I appreciate you leaving the troubleshooting in your video instead of creating fake perfection content. Keepin’ it real 👍🏼

  • @brandonleesanders
    @brandonleesanders Месяц назад +1

    You gotta use self tapping sheet metal screws. You’re using machine screws which aren’t a good use in this scenario

  • @kg6itc
    @kg6itc 3 месяца назад +1

    use another hammer (just push it) on other side when removing the diecut piece. Less stress on mechanism.

  • @iplaywithsticks6194
    @iplaywithsticks6194 Год назад +2

    How about a video showing an 'external' garage door lock for extra protection.

  • @Green_House
    @Green_House Год назад +2

    Hint: Gaffer tape the 'unlocked' lock to the door in the proposed location PRIOR to permanently fixing it in place and then run the door up and down to make sure the new lock doesn't hit anything. If all OK, you can fix it in the proposed location with confidence.

  • @markcosta6513
    @markcosta6513 2 месяца назад

    Where can I buy the lock from

  • @khbow2810
    @khbow2810 Год назад

    What about opening it when you return from vacation? That’s the part I’m looking for as my door came with the inside lock.

    • @thediygrunt
      @thediygrunt  Год назад +6

      You would have to lock it from the inside before leaving on vacation. Then go inside the house into the garage and unlock the door before you could open it to park the car. It is a bit annoying but you can rest easy on vacation knowing that door is locked and cannot be opened from the outside.

    • @khbow2810
      @khbow2810 Год назад +1

      @@thediygrunt I was looking for an outside application because I live in Florida and when I have to evacuate the garage is the only way I can get back in. My hurricane shutters, stupidly, only hand crank from the inside. And, uh, I’m not planning on being inside after the many storms have inundated some towns. But thank you!

    • @AndrewGreeneAg
      @AndrewGreeneAg 7 месяцев назад

      @@khbow2810I think they have bolt locks like this that are remote.

  • @Body_Model
    @Body_Model Месяц назад

    What size drill bit did you use?

    • @thediygrunt
      @thediygrunt  Месяц назад

      I don't remember the size if I had to guess probably 3/16 or 1/8 those are usually my go to bit sizes for pre drilling. Plus since its metal I was drilling then a drill bit that was metal rated most likely. Though I do remember the garage door frame being fairly thin and weak so maybe it was a normal bit.

  • @Jcombetta
    @Jcombetta 7 месяцев назад

    Wrong screws too