Been looking for a small mount for pocket 3 but need cold shoe to allow clips on side ways. These assume mics with regular mount. so cold show that could face away to someone infront of camera or vlog style. These are great and my search brought me here.
@chris-li6om hi Chris! I’m slowly phasing out of Etsy. The most recent designs including the MagSafe converter puck which you can use on dash mounts are on my website. Https://www.zoss.media/3d-prints
@chris-li6om they are all the same magnetic strength. Only the design and microsuede inner lining are what sets the website apart from Etsy. The Etsy stock are of an older yet great design.
@chris-li6om yeah having some quality issues right now from my supplier but I might be able to find one for you! Just leave a note and if I find one I’ll include it in your order along with the microsuede magnet.
Not sure if helpful to you or not, but you lost me at 3:40 when you said you never use the normal strength. I was about to order it (already on Etsy), but then heard you say that and couldn't help but think: "why didn't he just make one version that is strong enough". I don't like the idea of buying the 'expensive' version of something that should be good enough in the 'normal' version for some reason. Just thought I'd share my honest opinion with you. ✌🏻
That’s great feedback. I should have worded that differently. Many people do just order the normal version with no issues and is definitely strong enough. Strong will just inherently stick better
Those mass produced in China which help keep the cost down. My case has 2 cold shoes, ultrasuede inner lining, magnetic ND filter holder, a whole ecosystem of accessories, and works with the original DJI cover unlike all the other cheap ones.
Lmao learning look your fine there is no dress code when your reviewing a product 2 ways to counter this roll your sleeves up or use more lighting Peter McKinnon always wear dark and neutral colors you think someone telling him how to dress in the comments this guy just being petty
great job as that was the one accessory I couldn't believe Dji didn't make but would recommend you change the naming of your products, all the renewals can't be called new, just like the pocket theres the original then the 1st update is the pocket 2 and now 3, just be easier for people to e sure they are nut the right model ps my opinion but when I get my P3 I'll defiantly place my order 👊🏻
If you need another idea for an accessory : I definetly need something to do overhead shot video when I’m traveling. I draw and I really struggle to record myself when I’m drawing on a table. For now my setup is the mini tripod included in the creator kit and a insta360 tripod + a GoPro mount case on the back of my Dji that’d allow me to incline the camera. But it’s not perfect. If you have a better idea I would love to buy it :D
@@iamzoss I see on your site you have the DJI Osmo Pocket (Pro) and the DJI Osmo Pocket (mini) now just based on the look of it i dont have the MINI so Im assuming its the PRO
@@UneducatedPhotographer wow I just checked them out! I have a 3d printed car mounting kit with a very similar design to theirs. There’s being much nicer being metal and rubber coated
That might not be the best way. I sell magnetic attachments that you can mount on current backpack strap accessories. My mag attachments come with locking rings so you can decide wether to lock it on or have it easily remove and attach to the backpack strap accessory
New Feature Requests for the New DJI OSMO Pocket 3 1. Add a dwelling time for each of up to four settable movement positions in Motion Time-Lapse Mode. As each of the four settable positions programmed into a motion time-lapse sequence is reached, the end user could set from 1 to 10 seconds of a pause in gimbal movement as each programmed position is reached during the sequence before the gimbal moves forward to the next programmed position. This would yield a much more dynamic and professional looking, smoother motion time-lapse sequence. 2. In Motion Time-Lapse Mode the ability to set movement ease in and ease out settings from 0.5 to 3 seconds for each programmable gimbal position before gimbal movement normal progression rate is reached. 3. True 24.00p filming speed. 4. The ability to set time-lapse sequences based on 24.00p. 5. The ability to be able to record from the DJI Mic 2 and from a plugged in via USB audio source at the same time. 6. Adding a 10 Bit 4:2:2 recordable video codec. 7. Please add zoom capability when shooting in all time-lapse modes.
@@iamzoss The thing is DJI doesn't need to make a "Pro" version of this camera just to add these features. All of the requested features I have listed could be added via a firmware update. 👍😃
All the latest versions are on my website. The link is in the description or u can go here zoss.media/3d-prints :) let me know if you have any questions!
Just ordered it and I haven’t even ordered my Pocket3 yet. Saw a review about gym use cases, and then came across your video, sold me on not only the accessory, but also the camera itself. Excited to try it out!
Thanks for being an early supporter! It's crazy how much it has evolved to what it is today. If you ever want to upgrade let me know :) I'll send you a promo code for the support!
@Zoss Great OP3 accessory video! I'm glad you shared this because I wouldn't have found it otherwise. *Side note* seems that you don't skip leg day, nice quads.
hey does this magnet work with magsafe mounts in car dash phone holder? i have a magsafe car dash holder for my phone. and was wondering if this will stick to it. thanks!
I’m waiting until I get the camera myself before buying this mount but you’ve sold me on it and the rig. I subscribed because I like your delivery of information, very natural and not “RUclipsr-y” and of course I think the product(s) look fantastic. I’m excited to watch all your coming content and see the channel grow this year!
Thanks for subscribing! I'm xcited to share more content with you! If you're interested in some exclusive behind-the-scenes looks, product updates, and other additional perks, feel free to check out my new Patreon. Going to be offering some cool extras for supporters there. No pressure, though - your support on RUclips already means the world to me 🥰
My man Zoss! Is it possible to make a magnetic pendant?! Similar to the Insta360 go2/3 should be super simple!! But with the strength of your magnet with the one I have would be a game changer!!! Rather than doing a chest mount this pendant is more hassle and hands free! I imagine it could be easy to make, just a necklace with a circular 3d printed base with a metal plate inserted inside? Thats one of the huge benefits of the go 2/3 that people love and you right there could change the pocket 3 game with that!!!
it is possible! I just teased something like that yesterday on my patreon! It wouldn't be too hard to add a lanyard or necklace loop to it. Unlike the insta360 go, the osmo is huge haha and is kinda top heavy. It would almost need a new case to have the magnet closer towards the top of the osmo. BUT I'll give it a go and see what happens :)
@@iamzoss yesss! Even if you just do a custom one that’s made to order.. I would gladly buy one bro’ that’s one of the reasons I choose those cameras over my DJIs or other similar cameras because I can just attach and detach quick and conveniently! Plus I’m always at the theme parks lol so making it hands free for me vs having attachments or other annoyances would be awesome!! Shoot if you can make it happen brother, let me know!! I would gladly buy and give you all my feedback
@@parttimepaul there is a cold shoe mount available if you want one in the meantime. I don't have a particular timeframe to have a case-friendly mount that also has cold shoes, but I'll update on Patreon and RUclips when it's ready.
@@iamzoss okay no worries, I'm in no rush but I may opt for the cold mounts. Is it possible to include a cap for the magnet? I'd like to throw it in my bag and if the magnets are strong enough, I assume it'll start pulling everything next to it, is that correct?
Isn’t contrast one of the first things I learned photography? Shirt Vs product very difficult to see and differentiate. Don’t injure yourself patting yourself on the back.
What is your dream accessory for your OP3? 🤔
Osmo Pocket 2 mag mount in development. stay tuned :)
Been looking for a small mount for pocket 3 but need cold shoe to allow clips on side ways. These assume mics with regular mount. so cold show that could face away to someone infront of camera or vlog style. These are great and my search brought me here.
@chris-li6om hi Chris! I’m slowly phasing out of Etsy. The most recent designs including the MagSafe converter puck which you can use on dash mounts are on my website. Https://www.zoss.media/3d-prints
@chris-li6om they are all the same magnetic strength. Only the design and microsuede inner lining are what sets the website apart from Etsy. The Etsy stock are of an older yet great design.
@chris-li6om yeah having some quality issues right now from my supplier but I might be able to find one for you! Just leave a note and if I find one I’ll include it in your order along with the microsuede magnet.
Not sure if helpful to you or not, but you lost me at 3:40 when you said you never use the normal strength. I was about to order it (already on Etsy), but then heard you say that and couldn't help but think: "why didn't he just make one version that is strong enough". I don't like the idea of buying the 'expensive' version of something that should be good enough in the 'normal' version for some reason. Just thought I'd share my honest opinion with you. ✌🏻
That’s great feedback. I should have worded that differently. Many people do just order the normal version with no issues and is definitely strong enough. Strong will just inherently stick better
ur a supper GENIUS 👏
Dope! Ordered one.
Why is it $50? It's similar stuff on Amazon that is $15 and less that you can swivel all around with multiple cold shoes instead of 1.
Those mass produced in China which help keep the cost down. My case has 2 cold shoes, ultrasuede inner lining, magnetic ND filter holder, a whole ecosystem of accessories, and works with the original DJI cover unlike all the other cheap ones.
man I wish shipping prices wasnt like a third of the price of the mount itself
great product tho
It's a commercial for his accessories.
BIG tip, black on black does not work. Can't see the product. Wear a light coloured shirt.
I’m learning! 😩
Lmao learning look your fine there is no dress code when your reviewing a product 2 ways to counter this roll your sleeves up or use more lighting Peter McKinnon always wear dark and neutral colors you think someone telling him how to dress in the comments this guy just being petty
"Nice" vid Voss. Keep 'em coming & I have a pocket 3 also so I'm intrigued with your accessory builds. Good work!
great job as that was the one accessory I couldn't believe Dji didn't make but would recommend you change the naming of your products, all the renewals can't be called new, just like the pocket theres the original then the 1st update is the pocket 2 and now 3, just be easier for people to e sure they are nut the right model ps my opinion but when I get my P3 I'll defiantly place my order 👊🏻
Dommage le prix est trop élevé avec les frais d'envoi pour la France, je te souhaite bonne chance 👍
How are you setting it up and color grading. Would love to see a video. Dope clips
If you need another idea for an accessory : I definetly need something to do overhead shot video when I’m traveling.
I draw and I really struggle to record myself when I’m drawing on a table.
For now my setup is the mini tripod included in the creator kit and a insta360 tripod + a GoPro mount case on the back of my Dji that’d allow me to incline the camera. But it’s not perfect. If you have a better idea I would love to buy it :D
I watched her video and it lead me here!
So Innovative! I bought the Magnet and can't wait to purchase the Rig.
Cant wait to order mine this week
@@r2Facts hell yeah! Let me know if you have any questions!
@@iamzoss I see on your site you have the DJI Osmo Pocket (Pro) and the DJI Osmo Pocket (mini) now just based on the look of it i dont have the MINI so Im assuming its the PRO
@@r2Facts that naming structure is just for the cases. All of them work with the DJI Osmo pocket 3
@@iamzoss aaaah I got you
$90 for a 3d Printed Magnetite Cover?. Help me quantify the price component. Just a question
Just purchased your product on Etsy looking forward to trying it out.
Rubberized magnets are what 3 Footed Monster uses.
@@UneducatedPhotographer wow I just checked them out! I have a 3d printed car mounting kit with a very similar design to theirs. There’s being much nicer being metal and rubber coated
Could I use this on my backpack strap for when I’m walking around? Will it be sturdy & strong enough if a magnet is on the other side of the strap?
That might not be the best way. I sell magnetic attachments that you can mount on current backpack strap accessories. My mag attachments come with locking rings so you can decide wether to lock it on or have it easily remove and attach to the backpack strap accessory
@@iamzoss that’s perfect. Thank u so much!! Going to order now :)
Just ordered both versions! I look forward to putting these to use!
Dude this is GENIUS! Definitely ordered one! 💪🏽🤞🏽
Thanks for ordering! You'll love it :)
New Feature Requests for the New DJI OSMO Pocket 3
1. Add a dwelling time for each of up to four settable movement positions in Motion Time-Lapse Mode. As each of the four settable positions programmed into a motion time-lapse sequence is reached, the end user could set from 1 to 10 seconds of a pause in gimbal movement as each programmed position is reached during the sequence before the gimbal moves forward to the next programmed position. This would yield a much more dynamic and professional looking, smoother motion time-lapse sequence.
2. In Motion Time-Lapse Mode the ability to set movement ease in and ease out settings from 0.5 to 3 seconds for each programmable gimbal position before gimbal movement normal progression rate is reached.
3. True 24.00p filming speed.
4. The ability to set time-lapse sequences based on 24.00p.
5. The ability to be able to record from the DJI Mic 2 and from a plugged in via USB audio source at the same time.
6. Adding a 10 Bit 4:2:2 recordable video codec.
7. Please add zoom capability when shooting in all time-lapse modes.
that would be so nice 🤤you think they'll make a pro version that checks off most of these?
@@iamzoss The thing is DJI doesn't need to make a "Pro" version of this camera just to add these features. All of the requested features I have listed could be added via a firmware update. 👍😃
@@markjob6354 praying it happens 😩
@@iamzoss Me too. Thanks.
Please make a waterproof housing😩
A gimbal underwater would be crazy! Mmmmmm
@@iamzoss they did have one for the pocket 2 but it was very defective
Kudos to your next chapter on your youtube journey. Wherever it takes you. 👍🏼👍🏼
Thanks so much for the support :)
Make a cine rig with a osmo pocket 3
Haha I’ve already tried this. Matte box and all
If we use that magnet so many time with OP3 do u think is it will be a problem for OP3 screen.because magnets not good for video screens
I thought about that and that’s why i designed it with a cup magnet design so all the magnetism is in one direction - away from the pocket 3 :)
@@iamzoss hope u will upload a video soon about the gadget what we can hold phone with OP3
@@iamzoss anyway thank you very much
For your reply.👍
How can I get your latest one?
All the latest versions are on my website. The link is in the description or u can go here zoss.media/3d-prints :) let me know if you have any questions!
Just cancelled my order for the SunnyLife one and placed an order for this. Being compatible with the case was the dealmaker!
Hell yeah! Thanks for ordering!
How to purchase pls😢
You can find the link in the description! 😌
@@iamzoss is there discount bro? Cuz im from Philippines
@@Cindycxy720 maaan if i give u a discount then I'll have to give everyone a discount lol message me on etsy we can try and work something out :)
Hi Zoss,
New sub and bought one of each with the strong magnet and 1/4”screw mount
I just bought one
You'll love it! Where will you be sticking it?
Just ordered it and I haven’t even ordered my Pocket3 yet. Saw a review about gym use cases, and then came across your video, sold me on not only the accessory, but also the camera itself. Excited to try it out!
Dude you need more marketing for this, this is genius I found this on a whim, copping immediately
Im trying! Im trying! Thank you 🙏
I purchased the first one. Great product. It was a game changer for me.
Thanks for being an early supporter! It's crazy how much it has evolved to what it is today. If you ever want to upgrade let me know :) I'll send you a promo code for the support!
I love this mount. I ordered it last month. Can’t wait to take it on my next cruise.
@Zoss Great OP3 accessory video! I'm glad you shared this because I wouldn't have found it otherwise. *Side note* seems that you don't skip leg day, nice quads.
Hahaha 😂 it’s an illusion! Glad you like the video :)
Great video, i tryed to buy the magnetic mount but its sold out :(
Thanks! 🙏 Just added more!
Looks like good product. Couldn’t understand what it was the whole video until I checked the link lol
😅 wait. The whole video?
what is the 1/4-20 METAL INSERT ADD on for?
When you don’t have a magnetic surface to attach to. You can then connect a clamp with a friction arm to 1/4-20 metal insert.
@@iamzoss are you able to ship it overseas
Yes! Through Etsy and my website@@Bestshot-SG
@@iamzoss could you make it available in amazon?
@@zhenrong5948 this is a 3-6 month goal
hey does this magnet work with magsafe mounts in car dash phone holder? i have a magsafe car dash holder for my phone. and was wondering if this will stick to it. thanks!
No it kinda does but I would trust it unfortunately. Idid make a 1/4-20 mounting attachment to put on a suction cup for this reason
ok. maybe make an accessory for magsafe car mounts. not for charging. but just to stick to the mounts. thanks for what you do! @@iamzoss
An attachment that goes on a magsafe accessory is already in the works so current users of my magnet mount can use it :) @@najiahgriffiths4216
awesome! i just bought your attachment btw @@iamzoss
@@najiahgriffiths4216 Just released the magsafe adapter! zoss.media/3d-prints
But do you own a white cat?
Worse. Two huskies 😂
haha@@iamzoss
Thank you. Great product!
I’m waiting until I get the camera myself before buying this mount but you’ve sold me on it and the rig. I subscribed because I like your delivery of information, very natural and not “RUclipsr-y” and of course I think the product(s) look fantastic. I’m excited to watch all your coming content and see the channel grow this year!
Thanks for subscribing! I'm xcited to share more content with you! If you're interested in some exclusive behind-the-scenes looks, product updates, and other additional perks, feel free to check out my new Patreon. Going to be offering some cool extras for supporters there. No pressure, though - your support on RUclips already means the world to me 🥰
My man Zoss! Is it possible to make a magnetic pendant?! Similar to the Insta360 go2/3 should be super simple!! But with the strength of your magnet with the one I have would be a game changer!!! Rather than doing a chest mount this pendant is more hassle and hands free! I imagine it could be easy to make, just a necklace with a circular 3d printed base with a metal plate inserted inside? Thats one of the huge benefits of the go 2/3 that people love and you right there could change the pocket 3 game with that!!!
it is possible! I just teased something like that yesterday on my patreon! It wouldn't be too hard to add a lanyard or necklace loop to it. Unlike the insta360 go, the osmo is huge haha and is kinda top heavy. It would almost need a new case to have the magnet closer towards the top of the osmo. BUT I'll give it a go and see what happens :)
@@iamzoss yesss! Even if you just do a custom one that’s made to order.. I would gladly buy one bro’ that’s one of the reasons I choose those cameras over my DJIs or other similar cameras because I can just attach and detach quick and conveniently! Plus I’m always at the theme parks lol so making it hands free for me vs having attachments or other annoyances would be awesome!! Shoot if you can make it happen brother, let me know!! I would gladly buy and give you all my feedback
These are some great ideas Zoss. I’m going to into them more closely. I wish you best of luck with your new direction.
I appreciate that thanks! Let me know if have any questions
Just ordered the mount that allows the cover to be put on easily. I needed this, thanks!
You'll love it!
Do you have one for universal Pocket 1 and 2? You could sell more, Wear a white shirt next time for better viewing, More Close ups
Not yet, but I'm open to making one if it's requested enough. Thanks for the production tips! :)
Making one for the pocket 2 this week 🫡
@@iamzoss let me know on Pocket 2. Very interested
Tu ressemble un peu à Freddy Mercury, un peu , la moustache hi hi hi hi
That’s my dad 😏
Very cool! I just placed my order and now hoping I get it by the 31st. This will be great for my cruise because I don’t want to take a tripod!
The next batch will be ready to ship out on Thursday! It should get to you in time but might be close.
@@iamzoss thank you
Hi can you explain the magnet design option ? Thank you
Hey there! I’ve simplified it to be strong by default so no more options just a very strong magnet.
As soon as I saw that last option, I went to your Etsy page and bought immediately! , only 2 left.
It’s a hidden gem right now. Not sure how it’ll do though! Glad you like it!
Can’t wait to get it!
You are the man Zoss! About to place my order :)
LETSGOOO!
Love the new design!
It’s a beaut ain’t she 😘
So basically it seems like it's a choice between the cold shoes or being able to use the case?
Yes at this time, but I'm currently working on a way to fit cold shoes on the compact version. It's pretty tight, but nothing is impossible.
@@iamzoss do you think that'll be soon? I'm actually prefer the cold shoe mounts than the case - great work
@@parttimepaul there is a cold shoe mount available if you want one in the meantime. I don't have a particular timeframe to have a case-friendly mount that also has cold shoes, but I'll update on Patreon and RUclips when it's ready.
@@iamzoss okay no worries, I'm in no rush but I may opt for the cold mounts. Is it possible to include a cap for the magnet? I'd like to throw it in my bag and if the magnets are strong enough, I assume it'll start pulling everything next to it, is that correct?
@@parttimepaul ooooh that’s smart! I’ll see what I can come up with
Isn’t contrast one of the first things I learned photography? Shirt Vs product very difficult to see and differentiate. Don’t injure yourself patting yourself on the back.