I started watching this channel a while back and since then I've installed wheels and a lowering kit on my Golf Mk3 GTS. You are a inspiration Shane keep up the good work and stay safe.
This video help me choose what method to use to make my conquest lower. I was going to buy sleeve overs but clearly it not going to give me the low look I want. Shot alot bru for the info on sleeve overs on these cars👍
Thank you for the video I wanted to ask how reliable is the Honda wanted to buy one yet there is not much content on common problems and how to install coil overs and drop springs
I wonder if it would make a difference if you cut the sleeve overs for a mk1 so you can get the comfortablity of sleeveovers but the lows of a cut spring?
I wouldn't recommend that. Because then u are wasting your money.. I would say buy sleeve overs for ur mk1 but just get extended mounting for your front shocks and u will be able to slam ur mk1
hey boet u fitted sleeve overs in my friends dohc it went real low..u then had to lift the rear abit cos it was to low...so sleeves r ok for a honda it gives a decent drive aswel
Yo bro. Yes I know. That's why I mentioned in the video sleeve overs work different on each car. Specifically a Honda, in my Honda it also drove Comfortable and went loe
Hey LateLate I bought a Toyota tazz … but my mom used it to travel to work because it’s much lighter on fuel I’ve been considering cutting the springs about the same way you did on this car but I just wanted to know will it still drive soft when she goes to work(she travels 110kms to work and back )
Totally loving how you not respecting or obeying the rules of lockdown as set by the South African government, fitting of tyres, shock etc is NOT permitted only open to essential works and permit must be presented I'll be sure to share this video and others as much as possible... Keep it up hey
TEEJAY had a bad experience by slamworx with his air setup. Apparently they are good with sleeve over installations, but unfortunately i would rather buy coilovers.
I started watching this channel a while back and since then I've installed wheels and a lowering kit on my Golf Mk3 GTS. You are a inspiration Shane keep up the good work and stay safe.
This video help me choose what method to use to make my conquest lower. I was going to buy sleeve overs but clearly it not going to give me the low look I want. Shot alot bru for the info on sleeve overs on these cars👍
Cut springs looks dope ✨
I cut the springs on my sleeves, kasi lifestyle, citi golf lays frame with extended shock mounts
Loving the content bro keep it up been waiting’ all week
Put the thinner springs at the front it will be lower as the weight of the motor will have more effect on the thinner sleeves than the thicker sleeves
Almost got a heart attack when the Honda reversed. Seriously thought u were gna bump it
Make a video where you cut the rear springs
You need to cut the spring plates off the shock so it can go lower. Done a few cars already
Is the ride quality really bad?
On a other note why dont u try fitting the vtec rims on the toy
Remove the sleeve overs and put back the cut springs
Will be lower with a set of shortened shocks
I agree, and with a set of extended top mounts
What dont you adjust the height of the sleeves to get a nice drop??
Kool! I never knew a toyota conquest exsisted... I had a mitsubishi starion/conquest....👍
For Fiat uno bro what is better to go lower car the cut spring o coil over spring. And a good long drive for my the car bro..
Will sleeveover work on a Honda ballade old spec
Cut springs are better. Your car is beautiful
Thank you for the video I wanted to ask how reliable is the Honda wanted to buy one yet there is not much content on common problems and how to install coil overs and drop springs
@latelatecustoms please reply here
Link to the sleeves?
Any update on jody caddy build up
It is still at the spray painter , progress is 0% due to the lockdown
nah my bru put the cut springs back.....sbetter stance...Question...how is ur ride??thinking of cutting my springs on my vw fox...
I wonder if it would make a difference if you cut the sleeve overs for a mk1 so you can get the comfortablity of sleeveovers but the lows of a cut spring?
I wouldn't recommend that. Because then u are wasting your money.. I would say buy sleeve overs for ur mk1 but just get extended mounting for your front shocks and u will be able to slam ur mk1
Can it be possible to drop a Renault kwid
Awe awe videos just keep on gettiny better
can i put sleeve overs in my toyota corolla rxi 1999 model 🥺
Hi bro, hope you're well. How do you fit coilover sleeves in a polo 9n3?
How many coils did you cut at the back
.
Are sleeves a good option for budget stance.??
May I please ask were do you buy your sleeve overs or coilovers kit ?
I bought it at Chinatown
In capetown?? Or
Did you put any sleeve overs or drop kits on that white Renault clio parking there ?
What about installing sleeve overs in a gamma in the front?
Awe, which year is your conquest and are you using your original shocks
Can I ask is a Peugeot 307 sw good for cut spring or sleeveover
Can you do sleeves on a bantam rocam bakkie? Would like to see how low it will go.
I installed these on a Nissan micra and it's super bouncy. Don't know if I should replace the shocks or what.
Aweh boss...i also have a micra. Did you manage to get a better comfortability?
What are the disadvantages of the slaves compare to the coil overs
Do you perhaps know where we can get flip mounts bro? Love the work you are doing
Hi guys I have a Nissan Almera N17 how can I lower it cos I tried the whole country but no luck for coilovers plz help
How does one go about with the sleeves on a Corsa lite? Shortened shocks? Extended Mounts?
Install coilies
We will love to see it slammed with coilovers 😉👍
Have a e30 bmw and would like to no what wil be the best. Coil overs dont fit as the shock tower need to be cut.
I think it is possible to cut those springs. But even with sleeves overs, I think u will need to do some adjustments
@@LateLateCustoms really love your stuff. Thans wil keep you updated. E30 is a complete rebuild
That poor honda ballade is always parking lonely😅must do a vid with it😂
The one across the road lokkl! I had the same thoughts looks like a nice project
Does sleeve overs make the car bounce as coil overs
hey boet u fitted sleeve overs in my friends dohc it went real low..u then had to lift the rear abit cos it was to low...so sleeves r ok for a honda it gives a decent drive aswel
Yo bro. Yes I know. That's why I mentioned in the video sleeve overs work different on each car. Specifically a Honda, in my Honda it also drove Comfortable and went loe
cur springs💯
hope to see a full service vid on the yellow thang sparks oil etc🔥
I already did a service video on the Yellow Thang a few weeks ago
Keep doing ur thang bru..👌
Does anyone know if my corsa will drive smooth or hard with sleeve overs? Or is it beter to go to the coilies route?
What did you decide, I'm thinking coillies for mine
Would you recommend sleeve overs for corolla ae110 ?
I don't really recommend sleeves at all 😅
Cut spring for Tazz
How can i stabilize the sleeves so that the car can stop hopping when i drive? Anyone have advise. Ppl r telling to put in rubbers?
Cut springs 👌🏻👌🏻.
Where can i order this kit? Also have it delivered to the northern cape?
I have compressed springs on my mk1
Hi wich vw wheels are they
off topic but i d like to know, apparently corolla rxi coilovers can somehow fit in a mk4 sentra 160si,how true is that?
You need covers for your car or that green net for afdak
how is the bounce though???
I think you should sell and buy another Mk1 to modify 🙌
How to install rear sleeves
Would've been helpful if you showed how they fit at the back
Hey LateLate I bought a Toyota tazz … but my mom used it to travel to work because it’s much lighter on fuel I’ve been considering cutting the springs about the same way you did on this car but I just wanted to know will it still drive soft when she goes to work(she travels 110kms to work and back )
Cut springs
hey
LateLateCustoms great content. I got a hyundai getz thinking of lowering it; cut springs or sleevovers or compress the springs? Please advise.
I dont have much knowledge regarding those cars. Best will be to ask someone who already lowered a car like yours
Mr latelate what u recommend on a honda ek cut springs or sleeves
I actually recommend both, both drive very comfortable
i had both on my ek .... cut springs were the nicest drive. same lowness as the sleeves.
What do you think on a Citroën c2 i got a 40mm drop but its still a fist in the front but the backs 2 fingers
Cant you drop your Gti
How many rings did you cut at the front and at the back??
2 rings infront, one and a half at the back
Totally loving how you not respecting or obeying the rules of lockdown as set by the South African government, fitting of tyres, shock etc is NOT permitted only open to essential works and permit must be presented I'll be sure to share this video and others as much as possible... Keep it up hey
If I put sleeve overs in my polo classic 2000 model (rectangle light) how low would it go? And can one get those flip kits for them?
It will go low but not as low. Most probably the same lows as my car atm in this video. Not sure u get flipmounts for that cars
same situation. how did you end up lowering your car? would really love to know.
Bro how is the reliability at 465k km
Coilovers...... Is the best for me....
I need my tazz 1,6 exe overhauled who does the best work
Why these types of masks are not yellow is just a missed meme!! Glad you still pumping out the content this car looking really nice hey!
Much appreciated Yusuf! One Subscriber I remember from the Beginning 🙌🙌
@@LateLateCustoms Yes bro with pleasure. you a real inspiration to anyone that wants to catch on anything with their cars or make videos.
Brother where are you located?
Some Honda content
Install the cut springs again
thanks very helpful .....
Put the cut springs back
Yes boss nice job is thr away I can contact u been looking around to do my vivo
what color is your toy?
I prefer a decent low especially on a rolla so keep pleeaassee bruhh keep the sleeves if you havent changed them haha
You never show step by step process of how to remove and install
you need some semi clear indicator lights
Definitely! Waiting for the lockdown to pass😭
When are u going to buy air bags 👀😁
The day I can actually afford it 😅
Shorten the shocks. Your shocks are going to bottom out. If you shorten the shocks you will have more lows
When is the yellow thang coming back
Clean Engine bay as well
I also prefer snybach
Kan j nie die video begin as j die suspension change nie so baie data word gemors om te kyk hoe j karre yt en In trek data is duur buddy
I understand you Shane, but a intro and ending is what binds the entire video together.
How much for sleeveoverz
Sold
@@LateLateCustoms iis jit already sold
I like the beak 😅😆
Cut the sleeve overs once
Cut spring
I felt the disappointment in your voice bruv 💔😂. Everyone should just cut springs and save up for coilovers.
When are you lowering the back. That does look right the way it is now. Do a vid for us on that
I'm not going to lower the back because it is the exact same steps as the front. Also the height will be the same
Buddy do your rooflining
lol put back the cut springs and the the sleeves my way
When are you gonna get new mags on the toy
These wheels are meant for the Toy atm.
go to slamwork let they install it
TEEJAY had a bad experience by slamworx with his air setup. Apparently they are good with sleeve over installations, but unfortunately i would rather buy coilovers.
cut springs