Me and my son just bought a jdi 2se and fell in love with the sport. We are building yours right now and it’s fun as heck. No engineering background whatsoever. Blank slate for sure with us. Learning more every video of yours we watch.
Great tutorial! I am a mining engineer, I was told to get my part 107 Pilot License, now I love drones, I fly using the Drone Racing League Sim but I'm looking to build a freestyle / FPV drone. Your video was immensely helpful. Thank you.
Hi, awesome video and I'd like to follow this build. However, I can't find the fc and esc stack. I'm googling foxeer f722 hd + 65a esc but it's only coming up with foxeer f722 dji 03 and then a separate geprc 45a esc.
I'm new to this and want to start building haven't watched the whole video but I am just wondering is there one website to get all the parts I would need or do I have to look at different websites
Great video homie great tips for soldering I treat it like Tig welding high heat move fast equals less heat soaked into the part if you go low temp you spend to long waiting which equals more total heat into the part 🍻
Hi this is my first drone build and i am having a hard time finding the parts you used can you comment a link to the foxeer f722 and the 65A ESCs please
Hey man great great work you do. Just wanted to say , that for the job you present us here , you should have x20 times the views you got by now. Will follow you on your journey ! Keep it up
I need to build a very inexpensive purpose built drone. It just needs to have a downward looking camera the ability To pick up 6 oz travel 200 yd drop the 6 oz and fly back 200 yd what do you think the least expensive DIY build .could be can anyone give me a parts list .thank you very much
Best regards from cologne/ Germany. I’m new to the fpv hobby and your tutorial of building drone was extremely helpful. I’m still waiting for some parts cuz their are out of stock. I would love to see more video’s of how to use betaflight and set everything up, because this is the most confusing thing to me. I’m also planning to use expressELRS maybe you could also doing a video on that ✌️
I was always watching your content and hoping to learn how to build my own drone because I was a fan of drone's, I'm really Lossing hope right now and I hope you will help me🙏😞
awesome build! thanks for sharing your knowledge and experience with us! your betaflight for dummies video is six years old... would love to see you do your betaflight tuning for this build :)
Dose it matter exactly which motor wire goes where I never see if there’s a proper order to attach each wire like say positive negative and neutral.???? Dose anyone have a good answer???
@@dronecamps 🙏thank you very much I really appreciate you getting back to me, I’m going to build a FPV drone and keep looking to understand all the little details like this before I order all the parts
Hey bro! Great video, I've put this frame together twice now, as I really enjoy its performance. However, I can't seem to get the 03 to stop shaking during cruising flight. If I'm doing tricks, split s's/ turns ect...... you don't notice it, but giving it some juice and straight on, you can notice it. This frame doesn't come with soft mounts, nor have I found someone who's created a 3d printed soft mount for the master 5 v1 frame. Any suggestions man? My next step is to take some squishy double-sided tape and try and fit it in there on the sides of the plate. Maybe print plates with super soft tpu? Suggestions would be awesome as I really enjoy using the 03 as a main. Appreciate you and your videos. Thanks bro.
I dont know what a soft mount is as I've not yet built my first drone yet however I am a professional 3D CAD design engineer and If your willing to spare some time I could design the part your looking for free of charge.
Its great as long as you dont need to fix something later on. Then your stuck taking it back off to resolder anything or replace a chip on a board. Some waterproof drones use this method. Another thing you need to think about is certain things need to have a heat sink because being coated will reduce their thermal dissipation. Could cause overheating. Taking proper precautions though its fine.
Great Video I have some small questions I just started in this hobby I’m building SpeedyBee, 5 inch 6S drone I got Speedybee *Master 5 FPV Drone 5in *F405 V4 flight controller * RadioMaster RP2 2.4ghz ExpressLRS ELRS *Boxer transmitter *DJI goggles V2 * Missing Moros GPS Air Unit Do you have any suggestions At this point I’m kind of confused 😐 Thank you!
Freestyle quads prioritize durability, ability to carry a GoPro, and high power video transmitters for extra range and penetration. They also don’t need to be super light since absolute maneuverability isn’t as critical and the extra mass can actually be useful in terms of having weight to throw around and keep the video footage more stable. And many freestyle pilots prefer to fly with HD FPV systems since the better image quality in the live view is prioritized over super low latency or low weight. Racing quads on the other hand prioritize tight handling, light weight, and speed. This is primarily accomplished by using the smallest and lightest parts (20x20 stacks, thin arms, light VTXs / cameras / antennas). VTX power in races is usually limited to 25mW, and race courses are generally small, so using tiny VTXs is no problem since high power output isn’t required. And using video systems with super low latency is critical, so race pilots tend to fly either analog or HDZero. All-out durability is less important since maneuverability and speed are more important, and most race pilots have multiple quads so if one breaks you can fly another for the next heat (and repair the next day or whatever). All that said, you can definitely freestyle a race drone and race a freestyle drone. But a build optimized for one won’t be *as* good as one optimized for the specific purpose. Kind of like an F1 car vs. a pickup truck, but not quite as extreme. Maybe a Porsche 911 vs. a WRX would be a more appropriate comparison.
Me and my son just bought a jdi 2se and fell in love with the sport. We are building yours right now and it’s fun as heck. No engineering background whatsoever. Blank slate for sure with us. Learning more every video of yours we watch.
Great tutorial! I am a mining engineer, I was told to get my part 107 Pilot License, now I love drones, I fly using the Drone Racing League Sim but I'm looking to build a freestyle / FPV drone. Your video was immensely helpful. Thank you.
Go for it! Thanks for watching man! Good luck!
Did you have to extend the o3 unit camera cable?
What build do you recommend for a beginner and I have a radio master pocket
nice work J .
Thanks 👍
Jesus you describe basically my night, lol, wife sleeping.
How far dji o3 antenna until it get lost signal? I think i have wrong set, can not reach up to 100m.
That is one sick frame
Which controller and goggles you use with this drone?
can you use the same components on the mark 5 dc ?
Yes
Just bought this frame and built an analog version for my first five inch wish I would have found this during the build 😅
Well, not first but present..
Hi, awesome video and I'd like to follow this build. However, I can't find the fc and esc stack. I'm googling foxeer f722 hd + 65a esc but it's only coming up with foxeer f722 dji 03 and then a separate geprc 45a esc.
Great video. Can you add battery installation part.
I'm new to this and want to start building haven't watched the whole video but I am just wondering is there one website to get all the parts I would need or do I have to look at different websites
What if I don’t add a reciever and use the dji
nice build vid.
I'm well over due for ripping some packs
You and me both!
Lookin lika ripped 🙏
Great video homie great tips for soldering I treat it like Tig welding high heat move fast equals less heat soaked into the part if you go low temp you spend to long waiting which equals more total heat into the part 🍻
Hi this is my first drone build and i am having a hard time finding the parts you used can you comment a link to the foxeer f722 and the 65A ESCs please
Which crossfire receiver did you use for this build? Noticed that its missing from your parts list
you also didn't show how you mounted the antennas
hi des anyone know thw range of this drone
Super mount great quad thanks for chare 🤟👍👌
Could I use this drone for fishing? If so, would i need to modify it?
A little small man.
do u ever use expresselrs
Sometimes
Hey man great great work you do. Just wanted to say , that for the job you present us here , you should have x20 times the views you got by now. Will follow you on your journey ! Keep it up
I appreciate you man 🤙🏼
I need to build a very inexpensive purpose built drone. It just needs to have a downward looking camera the ability To pick up 6 oz travel 200 yd drop the 6 oz and fly back 200 yd what do you think the least expensive DIY build .could be can anyone give me a parts list .thank you very much
This is a great build video, thanks for putting it together. All up, assuming you have all the gear, what was the build time?
Couple hours ⚡️🫶🏻
Best regards from cologne/ Germany. I’m new to the fpv hobby and your tutorial of building drone was extremely helpful. I’m still waiting for some parts cuz their are out of stock. I would love to see more video’s of how to use betaflight and set everything up, because this is the most confusing thing to me. I’m also planning to use expressELRS maybe you could also doing a video on that ✌️
If you use TBS you’ll thank me later. - Welcome to the hobby!
I was always watching your content and hoping to learn how to build my own drone because I was a fan of drone's, I'm really Lossing hope right now and I hope you will help me🙏😞
Can i run walksnail avatar on this frame?
I think yea. Get the analog version
So what does it mean when the solder gets dule in color not shiny at all?
Then it could be a “cold solder” meaning it didn’t bind and can pop off. ☠️
Oh ok so the iron just isn't hot enough. Appreciate you
awesome build! thanks for sharing your knowledge and experience with us!
your betaflight for dummies video is six years old... would love to see you do your betaflight tuning for this build :)
Thanks Aaron ! Will do
Dose it matter exactly which motor wire goes where I never see if there’s a proper order to attach each wire like say positive negative and neutral.???? Dose anyone have a good answer???
No it doesn’t
Matter ☝🏻
@@dronecamps 🙏thank you very much I really appreciate you getting back to me, I’m going to build a FPV drone and keep looking to understand all the little details like this before I order all the parts
Hey bro! Great video, I've put this frame together twice now, as I really enjoy its performance. However, I can't seem to get the 03 to stop shaking during cruising flight. If I'm doing tricks, split s's/ turns ect...... you don't notice it, but giving it some juice and straight on, you can notice it. This frame doesn't come with soft mounts, nor have I found someone who's created a 3d printed soft mount for the master 5 v1 frame. Any suggestions man? My next step is to take some squishy double-sided tape and try and fit it in there on the sides of the plate. Maybe print plates with super soft tpu? Suggestions would be awesome as I really enjoy using the 03 as a main. Appreciate you and your videos. Thanks bro.
I dont know what a soft mount is as I've not yet built my first drone yet however I am a professional 3D CAD design engineer and If your willing to spare some time I could design the part your looking for free of charge.
What's your thoughts on conformal choosing everything. Not only would it water proof, but wouldn't it also prevent post build shorts potentially?
Its great as long as you dont need to fix something later on. Then your stuck taking it back off to resolder anything or replace a chip on a board. Some waterproof drones use this method. Another thing you need to think about is certain things need to have a heat sink because being coated will reduce their thermal dissipation. Could cause overheating. Taking proper precautions though its fine.
@@crisnmaryfam7344 cool. Thanks
Great Video
I have some small questions
I just started in this hobby
I’m building SpeedyBee, 5 inch 6S drone
I got Speedybee
*Master 5 FPV Drone 5in
*F405 V4 flight controller
* RadioMaster RP2 2.4ghz ExpressLRS ELRS
*Boxer transmitter
*DJI goggles V2
*
Missing
Moros
GPS
Air Unit
Do you have any suggestions
At this point I’m kind of confused 😐
Thank you!
👏👏👏👏👏
Your parts list did not include the DJI O3 and source. Thanks for the great video.
Great tips on building man! As newb to building all easy mistakes to make and then have to buy new parts from shorting or pad sep.
if you have a good solder gun than place it on 400 yo will be fine i do it all the time and i have no problems
not of the top the cables of dji unit...under is a canal for this wires
OK now help me program it in betaflight!
Muito bom !
Question to all: " What's the difference between freestyle drone and racing drone?"
Freestyle quads prioritize durability, ability to carry a GoPro, and high power video transmitters for extra range and penetration. They also don’t need to be super light since absolute maneuverability isn’t as critical and the extra mass can actually be useful in terms of having weight to throw around and keep the video footage more stable. And many freestyle pilots prefer to fly with HD FPV systems since the better image quality in the live view is prioritized over super low latency or low weight.
Racing quads on the other hand prioritize tight handling, light weight, and speed. This is primarily accomplished by using the smallest and lightest parts (20x20 stacks, thin arms, light VTXs / cameras / antennas). VTX power in races is usually limited to 25mW, and race courses are generally small, so using tiny VTXs is no problem since high power output isn’t required. And using video systems with super low latency is critical, so race pilots tend to fly either analog or HDZero. All-out durability is less important since maneuverability and speed are more important, and most race pilots have multiple quads so if one breaks you can fly another for the next heat (and repair the next day or whatever).
All that said, you can definitely freestyle a race drone and race a freestyle drone. But a build optimized for one won’t be *as* good as one optimized for the specific purpose. Kind of like an F1 car vs. a pickup truck, but not quite as extreme. Maybe a Porsche 911 vs. a WRX would be a more appropriate comparison.
@@GRANOLAFPV thank you for the answer, make sense.
first
Hey Justin, you hate ELRS ?
not really. Just like Crossfire
When you say, "... Up inside your unit." I listen.
😆
Ur discord link has Expired,
You need return to home on a 5" freestyle?
I must not have the right perspective on what freestyle pilots do.
the frame is extremely weak. 5 people , including myself has demolished this frame
your discord link doesn't work