Process West Verticooler Top Mount - 2008-2014 Subaru WRX - Install/Review

Поделиться
HTML-код
  • Опубликовано: 15 сен 2024
  • www.rallysport...
    Click here for more product info ▶▶▶ www.rallysportd...
    Like us on Facebook! ▶▶▶ www. rall...
    We install and review the New Process West Verticooler on a 2011 Subaru WRX

Комментарии • 18

  • @onewheelup
    @onewheelup 7 лет назад +7

    UPDATE,i installed the verticooler last weekend and i never drive my car,so a week later i figured since i spent a grand on a intercooler i would take a spin.people say that you don't gain any horse power or anything really from doing this.well last night it was around 39 degrees outside,I'm at stage 2 and i don't think my car is fast,its quick but not fast,so i went and made a few pulls and damn..it hauled ass ! it used to fall flat on its face in upper 3rd gear and 4th,well not anymore.it pulled so hard the next thing i knew i shifted into 5th just to do a smooth let off at over a hundred.it ran fast.yes fast.so after i go to cobb for tuning and get another 75-80 w.h.p. it will be really fast guys.falling flat on its face was heat soak.you gotta get one of these.

    • @rylandorr
      @rylandorr 3 года назад

      AHh stories of cute stage 1 and stage 2 wrx's. I remember those simple days before going full forged/rotated kit

    • @MoneyM12
      @MoneyM12 2 года назад +5

      @@rylandorr uhh want a cookie or something?

  • @jessicamast9859
    @jessicamast9859 8 лет назад +4

    look out his window at the white car at 4:02.........ahahaha

  • @onewheelup
    @onewheelup 7 лет назад +3

    i just got done installing mine,like a hour ago.i got a heat gun because its cold and plastic can be brittle and warmed up the brake reservoir level indicator and pulled it right out,used some long handle needle nose that are bent and hooked it right up on the other side,no problem,people make a big deal out of that.the biggest time consuming pain i had was getting the top transmission bolt to thread to the nut welded on the bracket.that was the worst part,other than that its nothing.haha but a ton of money

    • @rallysportdirect
      @rallysportdirect  7 лет назад

      Yeah it's not too bad getting it out, thanks for the tips!
      Rick

  • @SuBros760
    @SuBros760 9 лет назад +3

    I bet you had fun switching over the brake reservoir switch. RallySport Direct

    • @glass-man-2527
      @glass-man-2527 9 лет назад

      This is the same setup your running isn't it bro?

    • @SuBros760
      @SuBros760 9 лет назад

      Glass-Man-252 yes sir

  • @chrislkula
    @chrislkula 5 месяцев назад

    Will the Go Fast Bits Respons blow off valve fit with this intercooler??

  • @bivensrk
    @bivensrk 4 года назад +1

    What did you use to trim the insulation under the hood?

  • @maqmath
    @maqmath Год назад

    Question: do I need a tune after installing?

  • @stalekristiansen2942
    @stalekristiansen2942 Год назад

    Do i need a remap after install?

  • @karlosblends
    @karlosblends 5 лет назад

    What size screws ? Does it come with

  • @theelusiveone147
    @theelusiveone147 4 года назад

    Where can I buy the turbo outlet pipe? I can’t find it anyways
    Please help thanks

  • @ozenakkoyun3539
    @ozenakkoyun3539 6 лет назад

    Will it fit on my 2008 wrx sti

    • @rallysportdirect
      @rallysportdirect  6 лет назад

      This one will not, but they do make specific intercoolers for your STI.
      www.rallysportdirect.com/scp/engine/cooling/intercoolers
      Thanks,
      Rick