Performance Top-Mount Intercooler Kit for the 2008-2014 Subaru WRX Install Video

Mishimoto, the world leader in performance cooling products, teaches you to install the top-mount intercooler kit for the 2008-2014 Subaru WRX.
Product Page: mishimo.to/1SNsU10
Facebook: / gomishimoto
Twitter: / mishimoto
Instagram: / mishimoto
Engineering Blog: engineering.mis...
• Heavy-duty bar-and-plate core with cast end tanks to sustain high boost
• Core design optimized for optimal flow while providing excellent heat transfer
• +6 whp and +8 wtq increases
• 12°F temperature decrease with minimal pressure drop
• 80% larger core volume over stock
• 37.9% greater internal flow area
• Fits with stock hood-scoop shroud
• Includes turbo-to-intercooler O-ring - functions like stock
• Mishimoto Lifetime Warranty
Model: MMTMIC-WRX-08

[@bicyclewreck]

A few notes here (applies to most TMICs for these cars):
1) Cover the turbo outlet with painter's tape during TMIC swap.
2) Use hairspray as the lube for the TMIC to throttle body hose. This will act as a lubricant for install, but will dry and act as a sealant to prevent the hose from blowing off.
3) Add anti-seize to TMIC to turbo bolts.
4) DO NOT torque the TMIC to turbo bolts with a torque wrench. You will snap them off. Use a stubby ratchet and snug them down hand tight. The gasket provides the seal, not the bolt torque, so go easy.

[@Billy-te9lm]

Just followed these steps with my Mishimoto intercooler, easy to follow! Hardest part was getting the hose clamps on throttle body hose to an easy point to tighten 😂

[@xbexbe]

Time to upgrade the plastic bpv as well.

[@himgaming8708]

After install do need to tune¿

[@mishimoto]

A tune will not be required after install, however it could help you gain more power once the intercooler is installed.

[@TraitorPotater]

Whats connecting the intercooler to the turbo? Is there some kind of flange or adapter? It just doesn’t reach on my car.

[@mishimoto]

Shoot us an email at [e-mail] if you have any fitment issues. Thanks!