Done and done. Wow. Almost too easy. Thanks. I also saved a picture of the inside sticker showing the Main and A/B codes so I can hand that off to the next homeowner when they want to change things over.
You are passionate about locksmithing, thank you for the time you take to make these videos and do what you do. There is no one else on RUclips who is as informative and helpful as you are.
It's a mode that disables all pin codes and forces a key to be used. Here is the manual. www.schlage.com/content/dam/sch-us/documents/pdf/installation-manuals/23780042.pdf
You talked about locking the lock from the outside by simply pressing the Schlage button to activate the lock, but you did not explain how to program that feature in if it is turned off.
I got it wrong too... New corrected instruction: Change the programming code* Enter the original six-digit Program Code (Do not press the Schlage button) Wait for the Schlage button to blink orange three times + three beeps. Press the Schlage The keypad numbers turn blue Press “3” on the keypad The Schlage button to blink orange another three times + three beeps Enter the new 6-digit program code- Wait for the schlage to flash orange three times + three beeps. Enter the same new programming code again The Schlage light turns green + one long beep for verification
To test: enter the new program code and add a new user code or delete an old user code.
My BE365 is always in vacation mode. After putting my code in I can not unlock or lock the thumbturn just keeps turning without engaging to lock or unlock. Any advise.
Thank you for your prompt reply ! It was installed a couple of years ago by a renovation guy. I have been using the access code to lock the door whenever i leave the house without knowing i could press the button and turn the knob to lock. Until I watched your video today afterwards I tried but it didn"t work. Please kindly forward step one of the user guide to me, much appreciated ! Thanks again.
The user guide and installation manuals can be found on our website. Just follow the link to the BE365 found on this page of our website. You may just want to try the factory reset first. www.acmelocksmith.com/blog/how-to-factory-reset-schlage-smart-locks/
I need a waterproof deadbolt. This will be on my new shed - it has full size fiberglass doors so I want a good solid weatherproof deadbolt but wanted to get one with pushbutton code option as well as a key. Is this waterproof?
Yes. But no more so than any other off the shelf lock. Some locks (such as our favorite Yale lock), allow you to use high security cylinders. ruclips.net/video/P7j6PnZZnR8/видео.html
I can't turn the knob to lock the door after I press the button ?? I need to put in the access code to turn the knob to lock the door ? Please kindly advise ?? Thank you !
We have new HOA board members and the old board members still have the code. If we change the code, will the old code still work, or do we need to take out the old, unwanted code?
Our Schlage lock requires us to enter the code in order to lock it from the outside. How do we program it so that we can just press Schlage and twist the deadbolt to lock it?
hiiii please help! we’re trying to enter the programming code but it flashed red on the 4th number so I can’t get all 6 numbers in - is there a way to reset without removing the screws and taking everything apart
Thank you ACME Locksmith for this video. We have the same lock. What are we doing wrong if anyone can punch the top button and the door unlocks without a code?
Your lock is installed wrong. Down load the install instructions from our website and take a look at step #7. www.acmelocksmith.com/blog/how-to-factory-reset-schlage-smart-locks/#reset-be365
This unit and somethings wrong with it. When I type in the four digit pass code I can unlock the door and then I type in the four digit pass code to lock the door by simply pushing the Schlage button and the door automatically unlocks. It’s no sense. There’s no way to require the code to unlock the door. The Schlage button is the magic button to unlock the door every time. I don’t understand it. I also don’t know where the receipt is to bring it back to the store I bought it from
Mine doesn't lock by just pressing the schlage button when i leave the house. I need to punch in the 4 digit code to lock. Anyway to override that and just lock by pressing schlage button? Thanks.
Great video. Do you have suggestions ?because as soon as I put four digits the Schlage button goes red as if it’s the wrong code. I don’t have time to ad 6 digit programming code.
Hello, how are you doing. I have a lock just like I don't know, or maybe you mentioned it but I don't quite understand English and subtitles are bad. My point and my question is whether this lock is sturdy or against the water? forgive my ignorance but I don't want to make the holes in my door without be safe and create a problem for making the mistake, I hope you can answer me.
Hi and thank you for your helpful tips! One question. I am trying to use this for Airbnb and want to be able to delete the code after user comes. Can I delete the code that I have just created after a tenant leaves, similar to how you delete the two default user codes that come with the lock? I know that there are 19 different possible code you can create. But I wanna be able to delete any of those codes that ICreate so that if I have a tenant come, I can delete it once they leave. Or if I have a maintenance person come, I can also delete that code after they leave. Thanks for your suggestions!
This lock won't work. Buy our favorite lock, the Yale, shown in our RUclips video here ruclips.net/video/P7j6PnZZnR8/видео.html Interfaces with the AirBNB software. I haven't done it because I don't have an AirBnB but it is suppose to. You can buy it off our website here: www.acmelocksmith.com/buy-safes-online/yale-touch-screen-bluetooth-deadbolt-yrg426.html
Luckily I clean mine and live 3/4 mile away. Trustworthy people knowing how to work it after seeing thia video n having this specific lock with 2 rentals in the books mainly to bass fisherman coming to fish the local famous lake. So yeah he knows what's best just in my situation this works perfect
How come mine wont engage once I press the Schlage button to lock it? Everything else works except to lock it. I have to enter the code every time I want to lock ?
It's a schlage so it's one of the better home locks. But it's definitely bumpable and pickable. There are a number of electronic locks now that don't use key overrides. Bump proof.
After I enter my code to lock it, I found to unlock it I just hit the sclage button and it unlock it without me putting in my code. What I'm I doing wrong?
There's a cam on the inside of the lock. Yours is most probably not installed correctly. Download the directions on our website and take a look at step 7. www.acmelocksmith.com/blog/how-to-factory-reset-schlage-smart-locks/#reset-be365
Thanks again ! I've done the factory reset, the button works to UNLOCK only NOT TO CLOSE. IN REVERSE. It means anyone can open the door from outside to open the door by pressing the button. VERY STRANGE ??? PLEASE HELP TO FIX THIS PROBLEM>
This is just a manuel lock then? I'm confused what is the point of having a number lock if you still have to lock and unlock it manually by turning the knob?
Sorry about that. Instructions are below. Why would you want to disable it? Enter programming Code Wait for Schlage button to give 3 Orange Lights + 3 Beeps Press Schlage button Keypad turns blue Press 7 Schlage button will show 1 Green Light + 1 Long Beep if successful.
@@LocksmithRecommended Thanks for the response! My auto-lock feature was not working, and trying to program the auto-lock feature was not working, so I thought disabling it might actually enable it. I didn't install it, so I didn't have the instructions. I later found that the cam was installed incorrectly at a 90-degree angle to what it needed to be (arrow was not pointing down.) Here is the actual instruction from www.micasaverde.com that took less than two minutes and fixed the issue immediately: Here's how you tell if you installed it wrong w/o disassembling: If you open the door, extend the deadbolt (locked position) and press the Schlage button on the keypad, the keypad SHOULD turn blue. If the keypad doesn't light up at all and the Schlage button blinks green, then the cam is in the wrong position and you can easily fix it- -With the door open, and the deadbolt RETRACTED (unlocked position), remove the inside cover. -Disconnect battery (this won't reset any codes) -Remove internal baseplate (where battery resides) completely from Popsicle stick bar. -Ensure the cam is vertical, with arrow pointing down. -Reassemble the baseplate with the two screws -Connect the battery -Screw back in the inside faceplate with the two screws The Lock and Leave feature should now work. Any of the codes you had should still also remain.
@@GP-kl3zp I'm actually shooting a video on this very topic! The Schlage button, working backwards is one of the most frequently commented issues. www.acmelocksmith.com/blog/schlage-electronic-deadbolt-unlocks-with-schlage-button/
@@LocksmithRecommended I followed the reset process but the Schlage button keeps flashing red, holding down for a long time but none of the button lid up as the reset procedure shown..
Done and done. Wow. Almost too easy. Thanks. I also saved a picture of the inside sticker showing the Main and A/B codes so I can hand that off to the next homeowner when they want to change things over.
Glad it helped!
@@LocksmithRecommended❤
You are passionate about locksmithing, thank you for the time you take to make these videos and do what you do. There is no one else on RUclips who is as informative and helpful as you are.
Thank you so much!
Then try this link
ruclips.net/video/6LK5wc8eGZg/видео.html
Yes! After reading your responding post, I saw the instructions for all the other functions. WELL DONE
Glad I could help!
i cannot etnter my master code after 4 digit it beep and do not alow me to make it
Thank you so much Boss.
Mission completed bcz of you and you're video
Great 👍
Thank you, thank you so much ! Right to the point “ I did it all by myself, very clear and easy to follow instructions! Thank you 🙏🏻🥰🤗♥️
Glad it helped!
This was so helpful, thank you so much for putting this out here!
You're so welcome!
Thx buddy !!!!!!!! Not the same model but it was installed wrong. 🙏
Thank you so much saved me a lot of time going through the instructions.
You're welcome. ✌️
Thank you for making this great video❤
Thanks for watching!
Are the numbers lit up at night so I can see in the dark?
When pressed
ADT has entered the chat
Thanks, I just bought this lock. the manual does not include the vacation code. I will have to try if it is still available feature.
It's a mode that disables all pin codes and forces a key to be used. Here is the manual. www.schlage.com/content/dam/sch-us/documents/pdf/installation-manuals/23780042.pdf
@@LocksmithRecommended Thanks a lot. the paper manual from the box had only programming for new code, delete and new programming code.
Thanks for the help.
Any time!
I want to remove previous user codes, so i dont know those codes but i want to add new codes. how is that done?
Here's how to reset the lock and what you NEED to know before doing so. ruclips.net/video/lAsLBmbDrRQ/видео.htmlsi=r347EGLEDUPXUzth
You talked about locking the lock from the outside by simply pressing the Schlage button to activate the lock, but you did not explain how to program that feature in if it is turned off.
I got it wrong too...
New corrected instruction:
Change the programming code*
Enter the original six-digit Program Code (Do not press the Schlage button)
Wait for the Schlage button to blink orange three times + three beeps.
Press the Schlage
The keypad numbers turn blue
Press “3” on the keypad
The Schlage button to blink orange another three times + three beeps
Enter the new 6-digit program code-
Wait for the schlage to flash orange three times + three beeps.
Enter the same new programming code again
The Schlage light turns green + one long beep for verification
To test: enter the new program code and add a new user code or delete an old user code.
very good. Thanks
Great video
Thanks!
I was interested on how to program the lock to not allow one touch locking from the outside.
This? ruclips.net/video/L-jr3pZXnNI/видео.html
My BE365 is always in vacation mode. After putting my code in I can not unlock or lock the thumbturn just keeps turning without engaging to lock or unlock. Any advise.
Thank you for your prompt reply !
It was installed a couple of years ago by a renovation guy. I have been using the access code to lock the door whenever i leave the house without knowing i could press the button and turn the knob to lock.
Until I watched your video today afterwards I tried but it didn"t work.
Please kindly forward step one of the user guide to me, much appreciated !
Thanks again.
The user guide and installation manuals can be found on our website. Just follow the link to the BE365 found on this page of our website. You may just want to try the factory reset first. www.acmelocksmith.com/blog/how-to-factory-reset-schlage-smart-locks/
I need a waterproof deadbolt. This will be on my new shed - it has full size fiberglass doors so I want a good solid weatherproof deadbolt but wanted to get one with pushbutton code option as well as a key. Is this waterproof?
Thank you!
Do u have a video on how to delete the factory codes and replaceing with mind. I have the schlage encode Model BE489wb
As soon as you put your codes in your overwriting the factory codes.
Do you think that the key override feature would still leave this lock susceptible to being easily hacked / picked ?
Yes. But no more so than any other off the shelf lock. Some locks (such as our favorite Yale lock), allow you to use high security cylinders. ruclips.net/video/P7j6PnZZnR8/видео.html
I can't turn the knob to lock the door after I press the button ?? I need to put in the access code to turn the knob to lock the door ? Please kindly advise ?? Thank you !
Did you just install the BE365? It sounds to me like the cam wasn't aligned correctly. Check out step one of their use guide.
Very helpful, Thank you!
You're welcome!
We have new HOA board members and the old board members still have the code. If we change the code, will the old code still work, or do we need to take out the old, unwanted code?
Reset the lock. That will get it back to the factory default codes. Search our channel for reset schlage.
Our Schlage lock requires us to enter the code in order to lock it from the outside. How do we program it so that we can just press Schlage and twist the deadbolt to lock it?
It is not installed correctly. Here is our video on how to fix it.
ruclips.net/video/L-jr3pZXnNI/видео.html
hiiii please help! we’re trying to enter the programming code but it flashed red on the 4th number so I can’t get all 6 numbers in - is there a way to reset without removing the screws and taking everything apart
Try factory reset.
ruclips.net/video/lAsLBmbDrRQ/видео.html
Thank you ACME Locksmith for this video. We have the same lock. What are we doing wrong if anyone can punch the top button and the door unlocks without a code?
Your lock is installed wrong. Down load the install instructions from our website and take a look at step #7. www.acmelocksmith.com/blog/how-to-factory-reset-schlage-smart-locks/#reset-be365
@@LocksmithRecommended thank you so much! I remember that cam was sideways!! There is a video out there with wrong information. Thanks again!
Super 👍🏼
Glad it helped.
what if the battery dies? how do you open the deadbolt?
Key override
This unit and somethings wrong with it. When I type in the four digit pass code I can unlock the door and then I type in the four digit pass code to lock the door by simply pushing the Schlage button and the door automatically unlocks. It’s no sense. There’s no way to require the code to unlock the door. The Schlage button is the magic button to unlock the door every time. I don’t understand it. I also don’t know where the receipt is to bring it back to the store I bought it from
It's installed wrong. Easy fix.
ruclips.net/video/L-jr3pZXnNI/видео.html
Mine doesn't lock by just pressing the schlage button when i leave the house. I need to punch in the 4 digit code to lock. Anyway to override that and just lock by pressing schlage button? Thanks.
Your lock is installed wrong. Check out our video on how to fix that.
ruclips.net/video/L-jr3pZXnNI/видео.html
Mine tries to unlock the door after the 4 digit of the master code, am i doing something wrong?
Check this. Likely the issue. ruclips.net/video/L-jr3pZXnNI/видео.htmlsi=Z0gy8lZnEPxWHHbm
@@LocksmithRecommended thanks man
Great video. Do you have suggestions ?because as soon as I put four digits the Schlage button goes red as if it’s the wrong code. I don’t have time to ad 6 digit programming code.
We have two videos that might help you. 1) How to reset the lock, and 2) Help the schlage button unlocks my lock.
Hello, how are you doing.
I have a lock just like I don't know,
or maybe you mentioned it but I don't quite understand
English and subtitles are bad. My point and
my question is whether this lock is sturdy or
against the water? forgive my ignorance but
I don't want to make the holes in my door without
be safe and create a problem
for making the mistake, I hope you can answer me.
The lock is ok to use on a door. The outside of the lock is weather resistant.
Hi and thank you for your helpful tips! One question. I am trying to use this for Airbnb and want to be able to delete the code after user comes. Can I delete the code that I have just created after a tenant leaves, similar to how you delete the two default user codes that come with the lock? I know that there are 19 different possible code you can create. But I wanna be able to delete any of those codes that ICreate so that if I have a tenant come, I can delete it once they leave. Or if I have a maintenance person come, I can also delete that code after they leave. Thanks for your suggestions!
This lock won't work. Buy our favorite lock, the Yale, shown in our RUclips video here
ruclips.net/video/P7j6PnZZnR8/видео.html
Interfaces with the AirBNB software. I haven't done it because I don't have an AirBnB but it is suppose to.
You can buy it off our website here:
www.acmelocksmith.com/buy-safes-online/yale-touch-screen-bluetooth-deadbolt-yrg426.html
Luckily I clean mine and live 3/4 mile away. Trustworthy people knowing how to work it after seeing thia video n having this specific lock with 2 rentals in the books mainly to bass fisherman coming to fish the local famous lake. So yeah he knows what's best just in my situation this works perfect
How come mine wont engage once I press the Schlage button to lock it? Everything else works except to lock it. I have to enter the code every time I want to lock ?
I think you have this problem.
ruclips.net/video/L-jr3pZXnNI/видео.html
Can I reset to default codes?
Do you know about Erentallock
If I want to add multiple user codes do I just repeat the steps for add user code?
Correct. Up to 19 codes in total. Thanks for watching!
Can someone pick this lock or bump it?
It's a schlage so it's one of the better home locks. But it's definitely bumpable and pickable. There are a number of electronic locks now that don't use key overrides. Bump proof.
After I enter my code to lock it, I found to unlock it I just hit the sclage button and it unlock it without me putting in my code. What I'm I doing wrong?
There's a cam on the inside of the lock. Yours is most probably not installed correctly. Download the directions on our website and take a look at step 7. www.acmelocksmith.com/blog/how-to-factory-reset-schlage-smart-locks/#reset-be365
Thanks again ! I've done the factory reset, the button works to UNLOCK only NOT TO CLOSE. IN REVERSE. It means anyone can open the door from outside to open the door by pressing the button.
VERY STRANGE ??? PLEASE HELP TO FIX THIS PROBLEM>
I suggest calling Schlage's customer support while you are at the lock. 1 (888) 805-9837
hi how did you do factory reset
@@melissarenee7565 May I reply to you after my dinner in about an hour ?
Please check this link on RUclips for factory reset. ruclips.net/video/tJ7bKkzYaXw/видео.html
@@jcilwcw okay I don’t want to remove from the door so not helpful thx anyway
So in theory the original owner could change the codes if he simply remembers the programming code?
Yep. When you buy a home, get new keys made and reset and change the codes in any smart locks.
how do you enable the auto lock ? i accidentally turned mine off
You can find the user manual here. www.acmelocksmith.com/documents/schlage%20be365%20-%20fe565%20user%20guide.pdf
@@LocksmithRecommended The user manual won't help. @GP above is your real locksmith!
Mine doesn’t lock when I’m leaving the house with just pushing the slage button? How do I fix this?
It should. You could try resetting the lock. Here's our video on how to do that. ruclips.net/video/lAsLBmbDrRQ/видео.html
This is just a manuel lock then? I'm confused what is the point of having a number lock if you still have to lock and unlock it manually by turning the knob?
@@melinadeanne2680 You don't have to use a key.
Keys suck. Went to these after my son lost 2 house keys...you'll never look back.
Ugh, I don’t have the programming code 😢
Did you check the sticker inside the lock?
Can u help me please
Lol the ONE THING I wanted to do was disable the Schlage button auto lock feature (8:20), and you skipped right over how to do it......
Sorry about that. Instructions are below. Why would you want to disable it?
Enter programming Code
Wait for Schlage button to give 3 Orange Lights + 3 Beeps
Press Schlage button
Keypad turns blue
Press 7
Schlage button will show 1 Green Light + 1 Long
Beep if successful.
@@LocksmithRecommended Thanks for the response! My auto-lock feature was not working, and trying to program the auto-lock feature was not working, so I thought disabling it might actually enable it. I didn't install it, so I didn't have the instructions. I later found that the cam was installed incorrectly at a 90-degree angle to what it needed to be (arrow was not pointing down.) Here is the actual instruction from www.micasaverde.com that took less than two minutes and fixed the issue immediately:
Here's how you tell if you installed it wrong w/o disassembling: If you open the door, extend the deadbolt (locked position) and press the Schlage button on the keypad, the keypad SHOULD turn blue. If the keypad doesn't light up at all and the Schlage button blinks green, then the cam is in the wrong position and you can easily fix it-
-With the door open, and the deadbolt RETRACTED (unlocked position), remove the inside cover.
-Disconnect battery (this won't reset any codes)
-Remove internal baseplate (where battery resides) completely from Popsicle stick bar.
-Ensure the cam is vertical, with arrow pointing down.
-Reassemble the baseplate with the two screws
-Connect the battery
-Screw back in the inside faceplate with the two screws
The Lock and Leave feature should now work. Any of the codes you had should still also remain.
@@GP-kl3zp I'm actually shooting a video on this very topic! The Schlage button, working backwards is one of the most frequently commented issues. www.acmelocksmith.com/blog/schlage-electronic-deadbolt-unlocks-with-schlage-button/
@@GP-kl3zp I have been looking for this forever! Thanks. I contacted Schlage and locksmiths but no one seems to know.
@@steveqto Glad it helps -- funny how the simplest things get overlooked sometimes. Best~
The
This lock can be use with my android phone or just with Alexa? Seasonaldealsonline.com thanks
THANK YOU!
You're welcome!
I replaced a new battery and none of the code opens the lock. Trying to reprogramming to add new code but nothing works. what should I do?
Try a factory reset.
@@LocksmithRecommended I followed the reset process but the Schlage button keeps flashing red, holding down for a long time but none of the button lid up as the reset procedure shown..
@@yrot1123 Try their customer support (888) 805-9837