⚡️How to reset service on Mercedes ML GL 2007, 2008, 2009, 2010, 2011, 2012

[@kjohnsonco1]

OMG thank you so much, I have been wrestling with this for some time. I was missing the entry into Confirmation. Of course the book indicates you will wreck your car if you do this yourself, must take to an authorized dealer. :)

[@justinhare5979]

The hood must be shut as well as the doors to all you techs doing oil changes

[@buffalo5952]

Others didn't work - but this one works; thank you; it's fabulous!

[@buffalo5952]

I forgot to say: this worked for the 2010 Mercedes Benz R350 TurboDiesel; other postings did not work until I found this one and thanks again!

[@iyokeobinna2363]

I love the way you took it one by one, you will surely make a good teacher

[@traviswheeler4902]

Thank you. Appreciated the fact that you went slow enough to follow along.

[@jacobnel1880]

Just followed your instructions and jobs done. Thanks very much.

[@eagletrump2542]

Thanks 🙏. Just did my 2009 Mercedes Ml350 after self-oil change and air filter replacement.

[@Waris-bv7nu]

Worked perfectly on my 2011 ml350. Spot on with the recording. Thank you! The dealer would of course charge an arm and a leg for this.

[@nicholasphilip-neri2431]

Thank you very much for explaining and save me $$$$ since i did all the service myself since i am a retired garage owner. Great work!!

[@EricHommeric]

Did the full service at my ML and used your video to reset the computer,thanks

[@kyledowns8742]

Very properly explained, as many of us here know, regular diag tools (i had autologic) are difficult to navigate for these, so analog reset is required. Mercedes almost always has a different combination between chassis to reset service intervals, thanks a bunch!

[@brookalemayehuasfaw]

Thanks for the video. You Presented it the best way.

[@yonggangxu9871]

Really clear and concise explanation. Thank you!

[@vehix411]

thanks

[@aaronlanning1282]

Recorded perfectly. Thanks for the info!

[@harmanpreetsingh5400]

Bruh this actually worked!! Thanks a lot!

[@magaroam]

Thank you for taking the time to post this! Very forward and easy to follow instructions. Thanks again! 👍

[@khaledhussain9848]

Just reset my service C on my 2009 ML350 thank you 👍

[@yassendimitrov5290]

Great job, and nicely explained too.
Thanks, mate!👍

[@normlarsen4803]

Thank you worked great, good explanation!

[@henrylamas]

Thank's bro this was very helpful 👍👍👍👍

[@savnally1694]

Very nice! Very good instructions on reset👌🏼

[@edwinbarahona303]

Thank you. A very helpful explanation.

[@mathewshama4906]

Thanks.. helped me reset my light…👍🏼👍🏼

[@Youchoob1]

Thank you! Worked perfectly on 06 ML320CDi and 07 ML63 :D

[@antoniomichel43]

thank you,your video help me a lot!

[@mengleangtouch6171]

thank you very much, what a useful video it is.

[@MikeyB_1972]

Stoopid Mercedes. Thanks for this!!!

[@pabloabad8870]

Thanks great instructions!!!

[@searr154]

Worked perfectly thank you so much 😊

[@collinbarrows1932]

Thank you, great video.

[@unforseenlaboratories8017]

Perfect explanation

[@neilhale8626]

I just changed my thermostat in my 2011 GL450 and my engine light is still on... I’ve got a cheap scanner and can’t get the engine light off? My first Benz... do you need a special scanner or does the door have to be closed to turn engine light off? Now I’ll tell you this the engine light is only showing when I turn the engine on? Engine light doesn’t come on without the engine being turned on? Thanks

[@misterbob3988]

very well explained. thank you.

[@tnlinkh]

I did exactly what you have shown, but it appeared "Service Not Complete". Any suggestion for further action?

[@YingJwo]

Thanks a ton. …but for my US made 2011 ML350 you need to hold down the scroll button (left lower button on yours or the left button at 3 o’clock on mine) while you push the R button three times. Everything else is the same. Others may have this issue.

[@joonlee5569]

Great! Simple dummy guide

[@thouenthong461]

Please give me a call I can not do I try so many times please give me a call 209 60166554

[@tylerbabb4872]

Great explanation

[@guy990]

Amazing vid thank you

[@batteryexchange4333]

excellent job explaination

[@akejuanibire8101]

Thanks guy, you're amazing

[@afam2280]

Thank you. Very good man

[@Tony-hx2fj]

Thank you, I did it!!!!!!!!!!!!!!!!

[@ntotiladiakongo]

Thank you, just did mine

[@trevorbrown4915]

Excellent. It worked on my 2005 slk 200

[@sirmicro]

Thx for showing us this

[@幻尾]

Thanks for the sharing, it was very clear!

[@patrickuong7268]

Thanks, my friend. I have a question for you today I try to do exactly as you did but why does it still say Service not confirmed? Please I need your help thanks.
My Mercedes 2009 ml350 service E exceeded by 2933 days

[@simplynatalies]

Thanks for sharing, great info.

[@emsaiii]

Thanks - 2008 ML 320 CDI

[@EllasToysAdventures]

Nice 👍 Thank you!

[@Outlander87-c2k]

Thank for tips bro..

[@rolysilva1]

Thanks so much! from Denver Colrado

[@EricEvolving]

Perfect! Thank you

[@ManuelSanchez-qo2uh]

God bless you !!

[@lisahenson802]

I had my oil changed by Valvoline so of course they didn't reset the Service A reminder so thanks. This a lot of steps to remember, can someone please tell me that the newer cars are easier to navigate.

[@paulstarr7915]

great regards paul

[@josephwolfley9594]

Thank you sir!

[@mateusz17balas]

Remember to always do the service and not just to switch it off or skip it if u want to drive your car longer

[@icemonk12]

Thank you brother👍

[@lehsantos2715]

Perfect! Thanks

[@villageinmoderntimes8533]

tkns so much.will try tomorrow

[@walterespinoza2090]

Hello, how about i can the srs light eraser.....tank you

[@narhmary3959]

Very very useful

[@ruthkoppelman9223]

Thank you!!

[@bujeejanda4696]

Very helpful

[@AS768]

Thank you!

[@AndrewTucker-b9f]

Many thanks

[@giulianoMX]

Thanks bro!!!

[@ALLAPODOPRIGORA]

Thanks!

[@americanjordanian3456]

thank you soooooo much.

[@GHAZICAD]

Thank you

[@jenkotomaz]

Thanks for sharing

[@davidjacobs8558]

you should clarify that in order for "R - R- R" button to show Voltage,
first the screen must show mileage information, not some other info.

[@nikolas9469]

Tanks dude!!!

[@mb-gz9fu]

Hi. I have an issue with my 2010 Mercedes benz ml350 4matic. I put in the diagnostic tool after I removed my abs light came on. My message says "BRAKE, ebv,abs,esp Inoperative diagnosis/rig Test. I try your instructions on this video and nothing happen. Please help.

[@shauntamathis8986]

Replace speed sensors all 4 tires

[@longhairleeg]

Hi i try to reset my service pass123day like you show is not working saying that not reset, please if you can you can last me know why ?

[@holliew88d]

Worked like a charm, but how do we get the beeping to stop, I swear it didn't always do that

[@AbdulAhad-dv6pq]

Very helpful

[@kimberlymmcguire]

What is service c? I haven't found anything on it. I bought the car used and the message was already on. I took in for oil change and checks but they didn't reset the message. I want to make sure everything is addressed before I clear the message.

[@olidenizquierdo9714]

Hey this did not work on a 2010 Gl 450

[@widlertheagene3197]

Because you didn't do it right

[@apaiayob3266]

Didnt work out.. State service not confirmed.. What to do next

[@AWAISKHAN-yv7fw]

Thanks

[@chingiz85AA]

Thanks

[@markelstob5698]

Do any one know what a inlandport shutter motor is ????

[@ThadmanKane]

Pressing the R button 3 times does nothing. 08 ml350

[@davidjacobs8558]

after SRS light, the odometer must be showing on the screen, in order for pressing RRR to show Voltage.

[@magnusgustavsson2230]

@@davidjacobs8558 I had the same issue, when I set to odometer first, it works like a charm! Perhaps it could be pointed out in the video?

[@davidjacobs8558]

@@magnusgustavsson2230 yes, it should be pointed out clearly.

[@Audiman0aha]

Doesn't work on my 2009 GL550, please I need help! It does work on my wife's 2008 ML500 so I know I'm doing it right.

[@davidjacobs8558]

after SRS light, the odometer must be showing on the screen, in order for pressing RRR to show Voltage.

[@Audiman0aha]

@@davidjacobs8558 turned out to be a faulty reset button.

[@216edwin]

How about the service E

[@jenez8507]

than you

[@chimaobi4870]

I tried it on my 2007 ml350 it did not work The check engine light is still on

[@davidjacobs8558]

he is talking about service reminder message, not check engine light.
they are not the same thing.

[@louievigil8662]

What if it says service not confirmed ?

[@johncox5533]

Have problem get the beep after pressing r

[@victorchuks9347]

I pressed the R button 3times and audio off was displayed on the screen

[@kwasiadjei3456]

Mine gives me service not confirmed 😢 please help

[@omega3litre]

Wouldn't work on my gl420

[@JiriSrubar-cv4vh]

Reset mb

[@elishajones3325]

Richie Stevens remix

[@cvdsloubser]

When i press that R button 3 times nothing happening

[@adeldziri6854]

Wer kann mir helfen, ist alles auf Englisch.gibt's keine Deutsch Seite????

[@tay50100]

👍🏽👍🏽👍🏽

[@bogdanpanici5010]

I just recived the message service not confirmed! What should I do?
I‘ve deleted the services one by one in the menu, but your way didn‘t work in my case!

[@VRSM-1]

Recorded perfectly. Thanks for the info! Делал вот так ruclips.net/video/bJfe4WpReew/видео.html

[@noahwilliams1600]

Yeah that didn't work