EcoFlow Reports. New XT60I Connector. Why you need it.
HTML-код
- Опубликовано: 17 окт 2024
- Still using the old xt60 connector with your solar inputs? Want to increase your power in put without getting new panels? What's it all about? Keep watching...
amzn.to/4eG8A0G battery clmp adaptor
amzn.to/4eqIyPa xt60i y adaptor
“As an Amazon Associate I earn from qualifying purchases."
Middle connector is control only, to tell if its solar or 12v cigarette plug, it does not provide additional current carrying capacity
Hey I have been using 2 variations of the XT60 and XT60i to o-ring cables I have seen in your videos.
They both work great although the XT60i has a better throughput from the battery to the EcoFlow Delta 2.
I was wondering if you knew of a way to combine throughput from 2 batteries?
The Delta 2 can take 500 watts of solar input, but I can only get like 150ish watts of throughput using the XT60i.
See our video; Use any battery 2. It. Describes the use of a Y adapter.
Saw a video about wiring in a resistor and not needing the "i" version of the cable?
Not aware of this. Thanks
Why does it matter if it’s rated at 100amps when devices like the delta pro only draw 15.9amps max?
It's just high lighting the improvement.it also provides confidence it can handle the load faster and more efficiently.
LOL the old RUclips algorithm is really confused today.... Still gave the video a like tho :)
Hmm minimally useful and just a repeat of info from elsewhere. It would have much more valuable if you had told people about the internal wiring of the connector, Tieing the new center terminal to positive or negative or not connected at all in the plug and what each voltage state will allow the Battery to do when it dects signal on the middle pin.
Exactly. However this was a "report ". A quick introduction. What you are describing would be a in depth video.
I just got a Ecoflow Delta 2 Max, and am looking for the solar components now. It's all very confusing. The max input is 500W on each of 2 inputs. Should I used 10AWG or 12AWG versions of the XT60i?
The lower the gauge wire the higher current you can handle. The cooler the cord will be. Delta max 2 can take 500w 150V per xt60i port.
@@HarringtonMediaEcoFlow The Delta 2 Max Only takes 60v Max per slot at 15amps and 500watts also per slot, Not 150V, at least thats what mine says on the back per slot
Forgive me you are correct. I thinking of another unit.
It was the Delta Pro.
@@HarringtonMediaEcoFlow Hey no worries brother, I just wanted to mention it to make sure the right volts are mentioned as its important. thanks for taking the time to make these videos, we appreciate you sir!
whats the wattage?
For example: The XT60i DC input on the Delta Pro can take 1600W, 15A, 150V.
And for the xt60 how much it can take@@HarringtonMediaEcoFlow
60 amps
94. Volts
@@HarringtonMediaEcoFlow can it power my delta 2 at maximum 500watt solar power or is gonna get bottleneck, thank you for your answer
If they weren't building cheap junk,you wouldn't need this cable it would come w/anderson adapters or MC4 connectors,that's the standard world wide, but hey keep buying these cheap,junk,high frequency units, and they will keep breaking, and sucking up your money. As Forrest Gump said,stupid is as stupid does
Mystery. But that's why HMP IS HERE.😁