Wont press in place by hand. Clip it in loosely by hand to line it all up, then you'll need a ball joint press. I ended up using a large pair of channel locks and a half inch socket. Just line up the socket against the eyelet and squeeze everything together all at once with even pressure around the socket for the pin to come all the way through. Kind of snaps into place.
That’s the wrong part number tho. It’s the Dorman part number 14092 for the lower transmission linkage. I used this part in the video, it works for about 3-5 days then breaks
Just add me to your list of saving my night. I was about to head home from working a double and this happened to me. Boy I never cursed so much in my life. But watching this video and using my daughter’s hair tie got me home safe. Thank you sir.
Currently dealing with that on my 05 duramax, I can shift gears but when I go back up there’s nothing, it just stays in the gesr I put it in until I shut off the truck and manually put it back into park
I left my van at my sister n law house it would t go into gears then found your video went under the van and just pushed it back into place and works again but I guess I need to put a band or keychain and tie it up
Hello, just have some extra hair tie because that area gets hot and hair tie can melt, in our truck we replace that piece after two months and nothing happened, but replace it as soon as possible
Hello, this could be the problem but you won’t be able to remove the key from the ignition switch, if you able to remove the key then is something else
The aftermarket bushings are trash, I literally have to get under my truck and reattach this shit 2 or three times a day. Got frustrated and burned my arm on the catalytic converter one time. Just order from the dealer.
Fr I love RUclips and the community of people that put information on here to help another person because this video right here helped me 100%
I just had this problem and you saved my life , thank you so much god bless you
You’re welcome. Glad it helped you 👍, God bless you
Thank you very much!! I was trapped at a gas station with my family, and this helped me fix it!
Hello Landon , glad it helped you, have a great day
Wont press in place by hand. Clip it in loosely by hand to line it all up, then you'll need a ball joint press. I ended up using a large pair of channel locks and a half inch socket. Just line up the socket against the eyelet and squeeze everything together all at once with even pressure around the socket for the pin to come all the way through. Kind of snaps into place.
Hello, thanks for sharing, have a great day
That’s the wrong part number tho. It’s the Dorman part number 14092 for the lower transmission linkage. I used this part in the video, it works for about 3-5 days then breaks
Just add me to your list of saving my night. I was about to head home from working a double and this happened to me. Boy I never cursed so much in my life. But watching this video and using my daughter’s hair tie got me home safe. Thank you sir.
You’re welcome, glad it helped you, have a great day
Thank you very much. This vedio solve my panic as I stuck in situation where get machanic was difficult
You’re welcome, glad it helped you, have a great day
You saved my night! Thank you
Hello, glad it helped you, have a great one
This video just saved my ass thank bro
It gets hot and the rubber band pops
You just saved my day dude you dont even know
Hello, glad it helped you 👍🏼
Thank you so much I was stuck in panic mode.. this help alot
You’re welcome. Glad it helped you 👍
Does anyone know what Chevrolet model truck is in the vid.? Thanx
What if it’s not that? My shifter is loose and can’t put it into drive
Uses zips ties guys
So how did you actually put the new bushing in?
What is the piece that connects to the linkage called ?
Thank you
Currently dealing with that on my 05 duramax, I can shift gears but when I go back up there’s nothing, it just stays in the gesr I put it in until I shut off the truck and manually put it back into park
Saved me a lot
Glad it helped you 👍
Dang that's fire good job
Genius
Glad it helped you 👍
Main man I appreciate it zip tie keeps slipping
Glad it helped you 👍, have a great day
@@LUCASGARAGE-hk7jdwhat is that piece called
Bushing kit from an autoparts store @@chrismacks3640
Was your truck having trouble with all the gears or just the low ones. Mine has trouble getting past 1 and 2
Hello, Our truck didn’t go into any gear because the cable was out of its place, I believe your truck has a different problem
I left my van at my sister n law house it would t go into gears then found your video went under the van and just pushed it back into place and works again but I guess I need to put a band or keychain and tie it up
Glad it helped you, have a great day
What happens if I leave it with the hair tie because I can’t see a mechanic soon? Will it damage it?
Hello, just have some extra hair tie because that area gets hot and hair tie can melt, in our truck we replace that piece after two months and nothing happened, but replace it as soon as possible
That's exactly what I did
I gotta ram truck n it's a manual, shifter stays in place unless I turn tha truck off n put in first gear.
You saved my life!!!!
Glad it helped you 👍 have a great day
What is that part called?
Shift linkage bushing
Could this be the problem if car only drive’s reverse or is that something elae
Hello, this could be the problem but you won’t be able to remove the key from the ignition switch, if you able to remove the key then is something else
Would this be reason why a car wouldn’t start
Hello, with this problem the car always would start, if it doesn’t star should be something else
The aftermarket bushings are trash, I literally have to get under my truck and reattach this shit 2 or three times a day. Got frustrated and burned my arm on the catalytic converter one time. Just order from the dealer.
Thank you for telling us, we’ll order from dealer
I’m wondering if that’s what’s happening to my truck. My truck only revs when I shift into gear.
Is that towards the back of the car?
Hello, it’s under the cab, driver side
Did you start it in reverse?
Hello, no we didn’t start it in reverse
Hi, just wanted to know that name if these part’s please?
Hello, shift linkage bushing repair kit, I hope this help, have a great day
Why does that happen?
The bushing just wears out overtime from being shifted into gear constantly