Adjustable Work Light Arm | I Like To Make Stuff
HTML-код
- Опубликовано: 10 дек 2020
- I used a combination of 3d printing, milling, and garage engineering to make an adjustable work light arm you can use with just one hand. The first 1000 people to use this link will get a free trial of Skillshare Premium Membership: skl.sh/iliketomakestuff12201 #sponsored
Subscribe: bit.ly/ILikeToMakestuffSubscribe
Second Channel: bit.ly/iltms-2
Check out my TopVideos!: bit.ly/ILikeToMakeStuffTopVideos
Get digital plans, cool merch, and indepth articles at
iliketomakestuff.com
Learn 3d modeling in Fusion 360 with our online course:
www.fusion360formakers.com
TOOLS & SUPPLIES WE USED(affiliate links):
LED Panel Light: amzn.to/3oNbeYB
Aluminum Extrusion Wheels: amzn.to/3gB8Q4l
kit.co/iliketomakestuff/my-wo...
kit.co/iliketomakestuff/shop-...
Want to support ILTMS? The Maker Alliance gets exclusive content and more...
www.iliketomakestuff.com/join
FOLLOW:
/ iliketomakestuff
/ iliketomakestuf
/ iltms
MUSIC: share.epidemicsound.com/iltms
#WorkLight #ILikeToMakeStuff #3dPrinting
About I Like To Make Stuff:
We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!
These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!
Adjustable Work Light Arm | I Like To Make Stuff
• Adjustable Work Light ...
I Like To Make Stuff
/ iliketomakestuff 
Хобби
Oh wow super digging the track light idea!
Also if anyone is on the fence about taking there fusion 360 class I would highly recommend it I learned about so many different tools that I wasn’t even using and has saved me a bunch of time.
Another thing that I'd had to those 3D printed parts is a short, yet strong spring. When the cable is thight, the spring is compressed, the mechanism is locked. When the cable goes limp, the spring pushes the two halves apart, so the contraption can rotate freely.
Exactly, one you could put in the center of the two parts
What a great project! I feel like this would be an awesome thing for content creators as well - have track around the pieces of equipment being used, then on the arm have the camera attached so you can film from nearly any angle!
There’s a company that does this. Jazza has his studio setup this way
I think if you are gonna do that you might wanna fashion it either in this way or like the cranes in the docks with a supporting member being the Y axis (front/ back) and the main member being the side. but maybe fashion it so it uses strings to move on some direction to make it more "stable" and not move too much
Oh man, that Twisted Metal screen flash brought back a ton of memories!!
Haha
Was going to say the same! The original PS1 titles were so much fun
@@Iliketomakestuff hey
Hey bob I just had surgery and I love watching your videos especially since I love diy projects and finished side tables recently. You have lifted my spirits and taken my mind off of my pain. Thx
Bob: stops drilling a hole on the wood. "Do you hear crying ?" Bridgeport in the background 😢
I have to remember that those machines are there
How'd you comment an hour ago? I understand those subscription things like for the hacksmith but...
@@wesleymorrison9941 slipped $20 to Josh under the table
@@masterofnone Ah. I see
@@Iliketomakestuff Diresta must be proud! Can't wait to hear about this on Making It.
Another amazing project guys! Love that it was one of the "small" projects that finally got the bridgeport spinning up!!
Me too. That machine is really intimidating, but really fun to use.
Found this channel a while back and have watched you almost every day since!
Wow, thanks!
I love watching his daily uploads
Check out the mechanism for the Magic Mount for cameras. They lock into a very rigid mount after tightening one screw (which I’m sure you can turn into a grip/lever with some ingenuity). Magic mounts also lock the ball joints into place which is an extra fixed joint compared to your Mk1 design.
As soon as he started to drill the hole for the lever I immediately thought to my self "Under a load from the spring its just going to break off" and about 3 minutes later he mentioned it broke. I'm glad i'm able to think ahead on somethings like this but as always awesome video Bob!!! Keep it up!
I'm sure I'm not the only one who has said this, but I really enjoy watching you go through the project, your breaking it down to manageable fixes and just finding out how to do stuff. I found this channel a while back and always look forward to watching your uploads. Thanks guys =D
That trolley has me thinking about using it for AC extension cords and vacuum/dust extraction hoses. Overhead vs underfoot, less trip hazards and up and out of the way.
Yes, yes, yes! After dealing once again today with one of the dust extraction hoses on my table saw blocking the outfeed, I wholeheartedly agree. I'm going to put up a track with some generic hooks on movable, adjustable arms like Bob's that can hold stuff up out of the way, anywhere over the saw and workbench. And of course there's no reason not to have a light, too. There's plenty of room on the track. Like the man says, if it gives you ideas, he's done his job. Thanks Bob. You are my favorite maker on RUclips.
Make a fixture that mounts solidly behind the light with a handle and grip sticking out below. Use a third joint (wrist) on the top of the fixture to connect to the lower arm. That way you could position the light and arms with one hand.
Since you are using tension on the cable to lock the system, ball and socket joints would be more positionable.
This is channel has always been a favorite because of the perfect blend of Aspirational and Attainable. Thanks for the always-great content, Bob!
Proud of you Bob ! Good job jumping outside your comfortable zone to try something new. It helps to remind us that we need to do the same thing in our projects.
What a clever hinge mechanism!
Simply brilliant. Love your work.
Thank you so much 😀
Hey, Im a manual machinist of many years. I'm sure others have mentioned this as well, but when your'e machining aluminum, you can speed up the RPM's on that Bridgeport. Steel requires slower RPM's but aluminum, you can speed that bad boy up! Also, avoid climb cutting at all costs.
One of my next few projects for my channel is an articulating arm for my camera to make filming in the workshop significantly easier. The trolley system you put on the joist is exactly what I need to complete the project! Thanks for the inspiration! Also, your channel is what inspired me to start my own :)
This is a fine project, daunting and difficult, learning from mistakes. One of the best you’ve made so far.
On the other hand, you can’t beat the characteristics of light. You can shed it, throw it at a piece. The best solution would probably to a some led tubes on the ceiling but he, that ain’t sexy!
Check out the 'noga' mounts, they are used primarily for test indicators, they use a wedge system, not that hard to reproduce for your light arm 👍🏼 I have one and will never look back!
I love it when things are overengineered, but therefore work perfectly in every way. Good job!
Great idea with using the cable tension to keep the arms locked in position, if you ever wanted to have a breaking system for the trolley, you could always put a T-shirt nut (or similar) within the unused slot in the bottom of the extrusion and use that as your cable end stop.
Yes, I need something vaguely like this, only a few orders of magnitude simpler. I need to be able to aim some light at work pieces on my bench, and have them stay there. But I don't need all those bells and whistles (the whole tighten/loosen bit).
But until I saw this video, I didn't know I could use something like this. Thanks!
Почему нет субтитров у "Making Stunt Props for Action Movies"?
The short stop motion for the printing was cool.
Keep up the great work!
Has anyone else already suggested using a bike break leaver instead? That way you get something less bulky and also allows for cable tension management. Plus as every one else is commenting that power cable not being routed smashesmd my heart to peaces.
Aside that, great project, I'm really excited for version 2.
Ha... Just getting to release a video on a led light stand/arm as well... With a different style arm!! I got inspired off Adam Savages video!!! Great job Bob!!! Very clever!!!
It goes to show, there are so many ways to solve a single problem
Pretty dang ingenious. A whole lot of variables that had to be addressed, very nice. The next version will be another fun one to watch and learn.
This is a very nice solution to a major problem. Everyone always has too little light. But if you can run a steel cable through the connections, it should also work with a copper cable !!
Cool idea and build.
Just an idea... In the rotating joints, what's about a wave spring washer and a thrust bearing. When under tension the spring is compressed and the pieces lock together. When you release the tension the springs push the pieces apart and the thrust bearing can rotate freely.
Well done. Love the creativity and problem solving involved in this project.
I love seeing things made in past videos get used in new videos
Awesome project! It has a lot of challenges regarding stability, glad to see you meet them head on! Thanks for sharing, always inspiring to watch the problem solving process.
Thanks for watching!
Paste wax fixes all!
We originally used Chapstick which is always handy to have in the shop!
That Bridgeport Milling Machine and paste wax brings back memories. My first job was at my Grandpa's wood and metal pattern shop. One of my duties was to clean and wax his 2 Bridgeports. Its amazing how much easier it is to use and to clean one of those when it's been waxed. Love your videos. Merry Christmas and Happy Holidays!
Wow! Pretty amazing you could conceive that and actually make it work!
This was a good one Bob!
Some real genius ideas in this build.
It's really nice to see you combine all of those different manufacturing methods. I mean there was woodworking, milling, 3d-printing, laser cutting and a lot of manual work in such a seemingly simple project.
Also, did you add end stops to the aluminium rail, so the trolley doesn't accidentally slide off?
Keep up the awesome work! Best regards,
Paul
Yeah, there are end stop that are removable incase we need to take it off.
Shame the power cable wasn't routed inside the tube to make the installation even neater
Yeah it's BS that he didn't do that. Really pisses me off.
@@dickfer47d Well in the long run it saved the cable from chaffing and it's easier to maintain and swap out for other stuff as well.
At the end you were talking about changes to the design? One maybe to run the power cable for the light thru the arm as well.
True.
Next build take the power lead up inside the arms, simply place holes with small grommets at the ends to lead it out and make the bend. Will look neater. Plus with the spring drill and tap a small hole in the centre, so that you place a capscrew in there to provide a good lower mounting for the spring, so that it will not pop out even if you have the cable snap.
Brilliant build, Bob! One upgrade I might suggest towards the "Braking" of the track. if you could put the anchor for the tension up inside the bottom track of the extrusion, maybe with some small washers, that would add an extra point of tension to brake the trolley where it's positioned.
Brilliant! I love watching your thought process.
Thank you! Cheers!
Great project!
Very cool project. I'm not sure if the fixed detents on the joint are necessary though. If you had a piece of material in the center along with a locking nut, you could dial in the friction to keep the light in place, but still move it to where it's needed. Wouldn't hurt to also be able to run the wires for the light inside the arm for a cleaner look.
Thanks for the tips!
It’s been a while since last time I checked one of your videos, great to be watching this video.
Love the energy it gives me💗
Welcome back! We've got some cool stuff going on around here.
Great idea and beautiful craftmanship!
I would add a little something to protect the printed joint from dust since it's greased (like a rubber seal of some sort)
Really clever design! We have an indicator dial arm that operates on the same principle. But logically if you scale it up to this scale you need those indents to make clever use of force transfer.
I couldn’t put my thumb on what that mechanism reminded me of when I first watched this, but it just hit me. Push puppet toys! Was that your inspiration for it? Either way, it’s great, and something I’ll keep in the back of my head.
Awesome build Bob !!! And yay for the first chips !!! You are going to love that machine.. 🙏🙏🙏
I'm making a project with it right now, and I'm so impressed!
I have a shop that suffers from poor lighting. Since I have several work stations for a forge, grinding area, paint booth, and general work bench, this is ideal! I'd love to see a video if you do a Mark II version.
LOVE IT
When I say I FELL OUT at the twisted metal joke. I had to pause the video while I collected myself up off the floor.
Haha.
Love the idea! This has nothing to do with the video but you and Alec Steele need to collaborate on a project when covid ends if it ever does! Anyway I’m going to “Steele” this idea.
Good stuff, Bob!
Thanks!
I had a similar idea to this for a long time but I wanted to design the joints like noga style machinist indicator holders. With that style you would have an 2 actual ball joints, one near the ceiling and one by the light. Everything would lock in place when you turn a knob on the middle joint which would lock it down and force 2 inner rods/pipes into the 2 ball joints locking them down.
Thanks commentor
Hi Bob! you have an amazing channel, and I enjoy it a lot. This build was particularly important to me as I have envisioned a similar idea (adjustable light source), but while not based on an arm it was more based on a circular track (maybe a lazy susan?) so that you can rotate it from the base. thank you for the great ideas!
If you want ideas for a ceiling mounted work light google hospital inspection lights. They are very high quality and robust and would be great machining projects.
crazy useful project and retro
Thanks!
Woo superbly and cool content dear
cool idea
Thanks!
Wow! Great ideas and it seems like you’ve learned a lot along the way. Good luck with the new milling machine too
I love the concept - I bought a photography light similar to that one after seeing Adam Savage's loc-line light, but I like this concept better because it's up and out of the way. The arm mechanism seems overly complicated to me, though, considering I've seen swing arm lamps at Goodwill a few times for $5 or $10. Next time I see one I'm going to grab it and fab up a similar setup - I've got Unistrut hanging above my welding table so I'll just attach it to a trolley that fits in that channel. I'm sure the problem solving skills gained by fabbing up the tubing & 3D prints was worth the time, but I'm just going to take the easy route and upcycle an old swing arm lamp on mine :-)
P.S. I cannot believe you've had a Bridgeport sitting there unused for months! I would not be able to sleep due to overactive brain! I took a class on using one at the local makerspace, then they sold it a few months later (cue sad music).
I was like: A BRIDGEBORT? all my attention is there XD
80/20 extrusion (80/20 is product name) has a teflon slide bearing that works well on their extruded square tubing and would eliminate the rollers. The tension wire could lock the slide. Next time put the power wire inside too. Could it be your tension wire? Could your tension wire and metal tube carry the power? Very clever design here.
We added it afterwards
Very well done guys! It's a prototype It's going to have a few things that could be done differently or better. That's why we call it trial and error, to make it better, more productive and look better.
Keep the great videos coming 👍.
Thanks for sharing and God bless
Nice bit of engineering on the fly Bob! That mechanical arm turned out great. With a little bit of tweaking, it will function even better! 👍👍😉😉
You could have the cable terminate at the top to a plate wedged/spring tensioned, against the extruded aluminum. When you pulled the the handle it would also loosen the trolley to slide and sure up the connection a bit.
Great videos! Love this channel and all that you do!
I appreciate that!
LOVE YOUR VIDEOS!
For your track use a bicycle brake after all you've used a bike cable. You could have used the forks as well , head stock,main bar to seat. Cut off front down tube. so manyways to do it. I like it.
Man, that is really cool!!!!🤯❤
Love your work!
Thank you!
Should make that light to where it has track all around the shop space. Plus a moving tool wall that slides open or hinges open to reveals another wall of tools or another side
Great ideas! Now for an automated one made to look like C3PO’s arm holding his head so the light comes from the eye sockets!!!
Awesome arts and crafts fun
This really gives me more options. I have one of those "One" outlet garages. Alway looking for options for more / better lighting. Thanks!
awesome design - but for v2 also feed the powercable for the light through the tubes!
You're projects are the best
Thanks!
@@Iliketomakestuff do not need to say thanks cuz' it is true 👍👍
That's neat, I like the 3D printed joints and brake cable to tension the arm.
Us too!
Dude... you have a Bridgeport. Nice work to begin figuring it out. Put bolt on and knob on the trolley to firm it up to the extruded aluminum. that way when you bump the light it won't move.
Great vid! I'm thinking lost pla aluminium ball joints with this wire locking system maybe?
Also, being impractical, but having the tensioner automated when you touch the light would be cool.
12:33 this was pretty cool. Nice job
That's a pretty creative and unique design Bob. Keep up the great craftsmanship and hard work my friend keep making.
I think this is a great step. I guess it won't hold a camera. But smaller applicationa like ventilation might be a good idea also. Iltms team keep up the good work
I would have just used some large lockline hoses. I don't know whether it was the camera or some slow motion edit, but it looks like you could be running the mill about 3 times faster than you were, especially in aluminum, even faster in wood. I've used cable tension devices like that and they never keep enough to firmly lock things in place. I hope you have more success with that.
THE MILL!!! YAY!!!!
Please say you're going to refurbish the Bridgeport! That thing could look sweet with a shiny rebuild and new coat of paint!
And here i was just happy to get a couple of small projects done 😆 also I totally need that on my desk so i can see.
Awesome video! I built a house and now I'm working inside. The next step is the garage. I bought some lights but didn't quite find the best spots to put them on the ceiling in order to have enough light where I need it. While not having to make an adjustable arm for them, you just gave me the obvious idea of putting them on rails so I can move them easily, just with a simple stick. Thanks a lot!
I'd maybe have a small question: what would be a simple way of cable management for the moving part? You didn't really show it on this video
Cool idea, thanks for the video!
Glad you liked it!
I wod suggest adding the stop. If your like me you will be using the light and be not thinking about the end of the track. Just focused on the project. Until the light comes off in your hand, and you curse at it.
Haha, we added one afterwards
Pretty fantastic work, Bob! Looks and works great! 😃
The only suggestion I would give is to pass the power wires inside the tubes as well. 😉
Anyway, stay safe there with your family! 🖖😊
I have seen almost all of your videos... And after seeing this today I have made a simple foldable table lamp from pvc pipe....
This was great! I have a few dark areas in my shop, too. But I may just hang a couple stationary lights because it’s mostly just storage.
That'll work too.
I love your things that you make
Thank you! What do you make?
Oh also one thing I just thought of which is just cosmetic reason but the bottom part of the pole that connects to the aluminum block you made for the handle I noticed since its smaller now that it leaves a half circle gaps on each side. To make that part look more nice you may want to 3d print some half moon plugs for it for both sides. Just my two cents :)
I was litterally yelling my monitor..."USE THE MILL!" I am so happy you thought of that...faith restored!