Peugeot 208 Radio software update from SMEG 6.1.D.R20 to SMEG 6.3.0.R6
HTML-код
- Опубликовано: 12 фев 2020
- Peugeot 208 Radio software update from SMEG 6.1.D.R20 to SMEG 6.3.0.R6
Be careful
take full responsibility for the incorrect installation or malfunction you bear.
File here www.mediafire.com/file/9uy2864...
other Smeg II software here
www.gpspower.net/peugeot-citr...
before you install please check yours compatibility version
Hi! I have peugeot 208 2015 with smeg5.1.e.r2
which version can I download and where do I download it?
I was on 6.1.D.R19 (facelift Peugeot 208 2016), updated to SMEG 6.3.0.R6 as the newest one has a bug with the FM radio apparently. I had CarPlay enabled before, it was still enabled after the update. It didn't seem to need configuring, but on the vehicle information page had some extra buttons. I booked it into the dealer, they did the configuration and charged me for 15 minutes of work which removed those extra buttons.
Tom Parker good 😎🤘✅
Hey guys! When I try to install any different version, my car gives me an error something like "The file to update is protected" So I cannot update it. Has anyone else had this issue? Is there a way to solve it?
I did the same... Download the file, extract it into the main folder and copy it into a formated USB in Fat32.
Any advice?
Thanks!
all good only make sure is this file compatible with yours version receiver if not you have error, so please find compatible file from trusted source and try
Hi
I have smeg5.4.B.R8
What is the highest version that i can install ?
Hi when you go to forum ( link in description) you see all last actualization
I just bought 2014 peugeot 208 it has 7 inch screen how do i programme sat nave and reversing camera. Where do i get usb stick to upgrade as it did not come with one
You need use service software diagnostic or find solution on forum
Hi Jabba, do I need to do anything with the file when I’ve downloaded it? My removable disk drive says it’s not recognised when I plug it into the car
with file you need just downland and unzip to yours USB, plug and play should be work - make sure you downland right files compatible with yours media unit !
Thankyou! Don’t think I’ve unzipped it
@@danielleslevin2799 you welcome ;)
I have now Smeg6.05.e.r6 which file I need to download the first one or second one. Please help
Last one update with higher number , you find link in description and us well please check the forum Peugeot of lasted updates
Does the USB need to be formatted to a specific type? I had mine as exFat and I did unzip it but still says file unreadable. I have the same R20 version as your video and updating to R6 so should work the same in theory. Please help
please format as normal fat32 and unpacking file to main catalogue and should be work
@@jabbatellyou thank you, will try that now!
@@mariistoltsen6389 did it work?
@@TB-br8dx It did yes! Turns out the fault was with the USB stick, it was way too old, so we bought a new one and it worked immediately off that.
@@secretcreature8226 mine is old too - I will buy a new one. Thank you.
Hi There. I have Puegeot 2008 (2016 year) with Apple car play and MirrorLink. Is there any way I can add Android Auto to it? Any help will be really appreciated!!
Please check in forum
can i update smeg3 to smeg 6 ?
Hi i have 2013 peugeot gti and software is smeg3.21.a.r1 is there another update for me to do cause i cant use the one that you have
Yes not working because you need find compatible software to your receiver, please have a look on my channel updated for Smeg 3
I have version Smeg3.15.b.r1 or is it possible to upload a newer version like yours?
Please check official website and forums
how do i find out if the file is comapatible with my car i have a 2015 208
Have look on my video and you see how to check your software and device version, or go to Pegeot forum and find out easy
i have the 5.4.B.R8 i can use this update for my car?
you nee to look for a software update for yours SMEG+ this one is for SMEG+VI 2
@@jabbatellyou I have been trying to search for a long time where to download this update but unfortunately I can't. I tried to download a file I inserted into the machine but the update does not start. How can I do?
@@jabbatellyou Basically I have a problem with the blutooth. The music is activated with a 3 second delay and having version 5.4.b.r8 I wanted to know where I can get the latest update and how to download it ..
@@dario6579 Hi try to with other phone just for check, I make for loot of request next video with file for 5... Smeg+ series receivers
It doesn’t loose the maps update at the same time does it?
Yes you can lose
My unit includes navigation and is 6.1.D.R19. Will this update affect/remove the navigation function?
Go to satnav forum, you find solutions
Where?
@@roachtieler please see 👀 video descriptions
how do i find update for Peugeot 208 1.2 puretech 2017?
Please check yours model and after find update. Forum pages helps you find
what is the differneces from old to new one?
Please check Peugeot forum for full detail
Artur Jabba can you link me the forum;
@@johnakoakh one Link in the description of video
Hey! Any reprogramming after the update? I read that some units have lost CarPlay after an update... my radio keeps rebooting I’ll may try an update to solve the issue.
please see the last update 64A R10 I tested, about this issue maybe you find more on Peugeot or satnav forum, and when you find solution please let us know
Hi did u find how to solve the issue of rebooting myn has started doing same thing ?
Did you solve the rebooting? mine has started doing it and it is really annoying! thanks
Hi, I have a 2015 208 with SMEG6.1.D.R20 is the one you posted ok to update with?
Yes this for this version update
@@photographicexpeditions3288 thanks, will give it a try
So im having real problems with this. I have extracted the downloaded file onto a Fat32 usb memory stick. When im plugging into my car all it is saying is music files not found. Anyone able to help?
@@lukephipps6168 Make sure is right software you try update at yours device, Dowland and unpack file to main catalogue at yours fresh formatted USB stick, and after just simple plug in to yours USB plug at yours car and continue update like on this video I show you :)
@@jabbatellyou I believe its the right one as I had the same software as yours to begin with. I've extracted onto freshly formatted memory stick. Still no joy. All it says is music files not found
Hi there
I have a smeg 6.1.d.r8 . Do you have an update link for this?
yes correct - dont forget subscribe :)
@@jabbatellyou do you have the link for the upgrade? Also is there a need for a 2 step upgrade? I hear this is the case
@@pneves85 link in description or four website
How do you set up the folder on the USB?
just unpack to fresh after format USB to main folder and after sub folder should look like this ( SMEG_IV2_UPG ) USB over 1GB
@@jabbatellyou thanks for the quick reply. Yeah, done that but nothing happened when I plugged it in to the car.
@@Roseeeeee strange if totally nothing happen, please see how I done on video ( not only one I naked ) and definitely please check compatible update software version
Comment télécharger la mise a jour sachant que mon écran est sous smeg 3 ?
allez ici cette actualisation pour 3 séries ( go here this actualization for 3 series) ruclips.net/video/doOEk92v87c/видео.html
hi i have smeg6.05.dr8 which upgrade would you advise and where can i upgrade from
Hi always in Peugeot sat nav forum and please have a look 👀 on my movie description and us well don’t forget subscribe my channel please 🙏🏻
ennded up with a camera setting hidden behind vehicle setting wis i hadnt of bothered with this download
@@gordimac9 yes it is more on forum
@@jabbatellyou i now have no wfi either so thinking these upgrades are doing more damage than good lookig forward of vid telling me how to fix it?
@@gordimac9 always after update you need calibrate yours device .. btw just install yours previous backup software or if you dont have go to Peugeot Sat Nav forum and find it and install - simple
My smeg is 3.0.J.R7 can i upgrade for this one ?
Pegeout 208 2012
Not this one, please see my other video and find complete with your
@@jabbatellyou how I updated gps map only
@@filipepereira9155 go to GPS forum and see
i have 208 smeg. 6.05.D.R8, what is the highest version that I can install please ?
you have lasted one
@@photographicexpeditions3288 but i haven’t got CarPlay
@@sonialassouane6358 carplay you nee unlock in service Peugeot, or someone who know how to do
@@photographicexpeditions3288 ok thank you
@@sonialassouane6358 you welcome
Can i do this on a 2017 peugeot 208?
Just before please check your device compatibility with this type of software
Ciao ho uno smeg 3.20 quale la versione successiva per poterlo aggiornare? Grazie
Please see my other video for
I have 208 smeg 5.2.c.r1 which version i should download please thank youuu
Hi you have Smeg+ so 5.43.A.R2 its last version for you
hello. is the polish language after the update?
Hi not still English after my update
Hi i have SMEG 3 20 AR 3 Ican update this version yo SMEG 6
Not this one please find another my video with Smeg 3 updates
Hello, does this work on a citroen as well?
yes but for more detail and correct software please see satnav forum
Hey thanks for the reply, but I cannot sign as there is a page issue with the Referer what shall I put there ?
@@Ric01x I log inn, so you doing something wrong
.. you need find right and compatible software for your device and update, that all
Yes but I can't register thats what I am saying, because it says I need a referrer
Where do you get the update from ?
More actually from Peugeot sat nav forum or here on the description :))))
Can someone just please explain how to get the update been trying for ages
@@markholland5389 please watch video all is in the
Hi i have 208 2013 with smeg3.10r4 can i update it ? please help me which update should i get
best source for find correct software please go to 208 forums or official 208 website, I have video about to ruclips.net/video/doOEk92v87c/видео.html enjoy
Hi there! I have 2017 208 with stock 6.1.D.R19. Do i get Android Auto updating to R20 or this 3.0?
Hi This for SMEG system update only and I don't check what is R20 0.3 update please see Peugeot or Car SatNav forums for more info
Yeah, my multimedia is a SMEG+iv2, with native carplay and mirrorlink, but it doesnt have android auto. I will check this forum, i already saw the gpspower ofrum. Thx very much Jabba ✌🏼
@@VoxBR2 Yes Because smeg +IV2 this not android system this smeg system, You welcome :)
@Gabriel Ferreira did you ever manage to get android auto to work I have the same issue with a 2008 66plt