Great job. I'm 72 years old and my wife and I are not as agile as we used to be. I'm going to build the U shaped bed to hold two 28" cot sized mattresses with barely enough room between to stand up in to get up and around in the night. The space will be approximately 10 to 12 inches wide. The head of the bed, by the back doors, will have a 12" by 36" fill area. That will give a wider space for the top half of our bodies to stretch out and be perfect for sitting up and walking out of the bed area. I probably won't use a fixed, or movable table in the bed area. I love your modular set up. I will leave a toe kick area on the base of the bottom cabinets for walking in and out of the bed area. Kind of like the toe kick under kitchen cabinets. The front of each side cabinet could even be sloped wider at the floor. I'll figure all of that out when I get the plywood and tools out. Your video has been a great inspiration. Thanks.
Bravo. I've enjoyed the 2 1/2 videos I've watched so far. You were comfortable with your tools, gave reasons why you were using a particular method and then explained the assembly process clearly. All key to a good instructional video. One thing I would suggest that could be helpful to you. Two piece aluminum cutting guides. Together they form a straight edge that is 8'6" long. Individually you have two pieces 4'3" long. Used in conjunction with your circular saw it does the job of a table saw and panel saw. With slightly more Set up involved. It is hard to push large sheet goods through a tablesaw without surrounding accessory tables. A panel saw is the ticket. However this aluminum cutting guide, several manufacturers make them, Steps in for both tools. It would've helped when you ripped your furring strips, as well as doing your component pieces that were too large to comfortably rip On a table saw. I look forward to watching the rest of your videos. Do good and have a good time on the road.
I like the u-shaped bed/bench set up w/removeable table... You can sleep 2 either separate or together, and storage is good. Bonus: if you're sleeping two separately; if you have to go to the bathroom at night, there's less chance of waking up the other person.
There are fixed beds where storage can be accessed from inside as well- whether using a hydraulic lift or draw/cabinet door. I like Trent and Allies and Emon and Becs build. Both had fixed beds with separate seating
I’m so impressed with your building skills and knowledge. This is going to be a strong well built van. I can’t wait to see a tour once it’s done. I’m interested in knowing where you got your wood working skills. You should seek out going onto the Gutted series where they have a team of people that have to build out a vehicle in 5 days. You would be an extreme asset to a team!
Thank for your kinds words, they mean so much. Believe it or not, this was the first time I have ever built anything out of wood. Crazy what the internet can teach you. And yes, I LOVE gutted and just sent in my application for season 3. Fingers crossed😁
@@LaurenLawliss OMG Girl! I’m rooting for you. Once they see your videos you’re in! I’m totally shook this is your first rodeo with building 🤯 I’m obsessed with your videos and learning from them. Good luck and keep us posted!
@@LaurenLawliss you show us everything for a well built van. The details on insulating was impressive. I was SMH the entire time saying to my wife where did she learn these skills? She said, if she could do it you could do it. I’m not sure about that you have patience and an eye for perfection.
As always, great job Lauren. Well thought out, well executed. Can't wait to see the next build section. Nice that you have all the tools and space needed to get the job done. Congrats.
Hi Lauren… I’m so glad I came across your channel….. just bought a 2023 Dodge Ram Promaster 2500 159 wb. I have been looking at your videos and have decided I want a u-shaped bed/dinnett/lounge area!!!!! You make it look so easy…. I have no knowledge about building a van but I am doing it anyways 😮😊 thank you for sharing your experience. I am a 67 year old who wants to be able to travel the United States and be Free! I will definitely continue to watch your videos and learn from YOU ❤😊 YOURE AWESOME 👏
As a builder of all things, including cabinets, I'm really enjoying your descriptive video's. I watch and have watched a good amount of video from van life builders and one thing I've seen time and time again and that is that even though I'm sure you'll never have an accident and spill on your cushions while drinking coffee in bed some morning, other people have. They discovered mold growing on the wood and quickly realized it was there because there was no ventilation between the cushion and the wood face it sat on. I'm sure you have that covered but I thought I'd mention it.
Thank you for the kind words - I really appreciate it. Yes, mold is also something I have heard of too so it’s something I will keep an eye on for sure and adapt if I need too 😄👍🏻
Really well thought out and built. Only change I might have made is the section for your sport equipment, with the rear of the box able to fold down or be removed so that that section could have been easily accessed from the rear of the van as well. But that might not be an issue for you.
I've watched a few of your videos and agree with all the comments praising your teaching skills. Clear, concise and comprehensive. A+ And your craftsmanship. I have one question on this one- why did you make bottoms to the benches instead of just screwing into the sub floor? Also, do you have any squeeking and creaking now? Is there anything you could have done to eliminate them?
@@LaurenLawliss I think what they're saying is, use the hole saw drill bit to make a round hole on each side of the oval template, then jigsaw out the center to make your oval cutout. Then smooth around the edges.
Lauren, I’m surprised I can give you any tips, but have you ever tried the bit device fore hinges, it’s a self centering bit, works awesome on hinges. I’m 64 and finally bought one a few years back.
Wow love your build. I am doing my 3rd build. I like the access to batteries and water. But I also like to have the stationary bed. But lagoon to put near the passenger seat once it is swiveled. Haven't really decided yet. Thank you for sharing.
The bed setup was one of the biggest and hardest decisions I had to make, but I’m happy with the convertible option for MY wants and needs. I also have a lagun table mount for my passenger swivel seat and love it.
If all goes according to plan I will get a 136 Promaster high top in spring of 2024. I am 99% sure I have decided on the u-shape bed as well except the portion along the back door I plan on making wide enough for a twin mattress. That way I have my lazy fixed bed for 99% of all days and the nook seats would only be big enough for one person each. I also plan on making one nook seat flip up to reveal the composting toilet and the other nook seat would have an opening to a litter box for my cat. Your design looks like it could get 5 people around the table where my design would accommodate only 3, but I get my always ready bed for always effortless naps.
Another great video. Things are moving along nicely and I've picked up a few more tips for my build ;) Have you given any thought to possibly a louvered vent for the shoe box area and possibly the other boxes to allow air circulation? Can't wait to see your electrical and plumbing build-outs.
Thank you. Great question! I am planning on adding vent openings on the back of the two side boxes. Still trying to determine my approach for the middle boxes. Electrical will be coming soon ;)
You are doing a fantastic job of building the way you want it done and taking your time wish you a good year from an old guy in Minnesota winners coming but I still move around and do exercise anyway take care and good luck with all your endeavors 😇🌞☕🤗
wow! what a great video! very nice job! this was very helpful. It is important to plan it out and take your time and your video shows that very well. I'm going to subscribe and watch your videos from the start of the build.
Looking good! But why did you added bottoms to all boxes? Adds expense and weight. Some strips at both ends would have enough to keep it square and attach to subfloor if needed.
I wonder for a bed if a high quality easy chair recliner could be used for a bed. There are those that plug in and can be heated or even have masage and the back and leg support move independently and stretch out to be flat or almost flat. I wonder if you ever say that or considered that. I doubt they are as flexible as the options you showed here, but I think they would be more comfortable and could even be removed and put into a tent, or under a folding cover. I cannot see how well they would fit in a van like yours or how flexible the space around it would be. But, it would probably require the least amount of work and you could also sell it if it didn't work.
Great videos! Informative and well documented. Question on this video as to why you installed a bottom to your bed boxes vs anchoring to your subfloor?
Great video. You are excellent at explaining and demonstrating througout the entire video. Q: can you supply a link for the purchase of the water tank? Happy new year!
Lauren, wouldn’t it have made sense to make your setup, but make it with the storage underneath? Then you’d have tons of storage and a natural place to also put bedding? Then the stuff you put under your bed maybe could be moved and better use of space? Just curious, not critical because you did as nice a build as I have ever seen. Very creative, talented, and well thought out, just curious if you would do it differently today?
Thanks the comment. I wanted everything in the van to be easily accessible from the inside so this was the perfect solution for my wants and needs. I’m very happy with it and wouldn’t change a thing 😁
Thanks for the comment! I fastened the to the subfloor and furring strips with screws in multiple locations. Also the weight of the electrical and plumbing helps to hold it in place☺️
The van is 95% complete, just have some small finishing projects. Haven’t worked on the van in a year - just enjoying life and traveling. Check me out on Instagram @LaurenLawliss for van life updates!
Like everyone else, I'm impressed with your skills, Lauren! One question (again, sorry): did you screw the side boxes to the low section furring strips? What did you do with the center and back boxes? are they attached to the floor? I'm not sure this would be my bed choice since the fixed one is quite simpler, but you keep inspiring me out of my comfort zone 👌
Thank you! So the original plan was to drill the boxes to the furring strips. So far I’ve only permanently install one box and I just screwed it down into my subfloor. I plan on doing that with the other three boxes too. Keep the questions coming, I’m happy to add my two sense. I know you can do this bed style if you choose, you got this!!🤩
Love your videos! I’ve been stuck on electric for months and so ended up just not working on my van at all out of frustration, and I finally feel motivated again because of how straightforward your explanations are! Curious if you think it’s necessary to have a bottom on the box? I’ve already installed my flooring so wondering if I can just leave the box without a bottom?
Thanks for your comment, Madeleine! I hear you. Sometimes taking a break from the build is necessary. It can be overwhelming and frustrating at times. Great question! No, I don’t think a bottom on my bed boxes were necessary. It’s fine with or without a bottom. I added a bottom because I knew I’d be moving the boxes around a lot before permanently installing them so the bottoms helped them stay in tacked. But if I did it over again knowing what I know now, I might skip the bottoms to save on weight and space. But totally up to personal preference. Good luck with the rest of your build! You got this!
@@LaurenLawliss That makes sense! I hadn’t thought about that - definitely easier to move them around when they have a bottom! Also curious for your thoughts on using 1/2” Sande ply? I’ve had a really hard time finding Baltic Birch. Unfortunately it’s only 3 layers, not 9 like yours, but wondering how crucial that is in your opinion?
Honestly, I LOVE baltic birch plywood. It has so many benefits and I really tried hard to find what I have. At the end of the day, other plywood will get the job done so it is up to personal preference. If you are near the Tampa, Florida or Utica, NY area let me know because I know two places that have some baltic birch.
Hey, where did you happen to find that TwoWanderingSoles van photo? It doesn't seem to be their personal van and I'm hoping to check out more photos of that build.
Lauren, I've watched this video I think 100 times as I'm getting ready to build mine. Did you screw your box to the furring strips? I was going to screw the wheel well sides directly to cross nuts I'm installing as I'm not using furring strips and was wondering if that would work.
Yes, I screwed the wheel wheel boxes to the furring strips and the subfloor. If you don’t have furring strips, I’d trust screwing the boxes to the subfloor and one another (the subfloor ain’t going anywhere). Hope this helps 😄
@@LaurenLawliss thanks! I've been overwhelmed trying to figure it out on my own. I'm grateful for your superb tutorials. I've watched all your videos over and over again and as I've mentioned before, you're an incredible teacher!
@@samson7770 Yes! When I originally built the bed area two years ago I wasn’t 100% sure but have narrowed down some ideas to just that. Appreciate the idea 😄
Thank you for your question! Personally, I didn’t want to deal with the hassle of setting up the portable system every time I needed to power something. Also, my electrical setup will be powering all my 12v DC and 120v AC appliances so through my calculations, I require a large amount of power for everything. The portable setups are great options for certain needs, but not for mine. Hope this helps!😊
@@LaurenLawliss Ok I understand, but I recently saw a video from a van builder that used her bluetti to power both DC (puck lights and fan) while simultaneously powering a/c appliances. She hooked up a fuse box to the bluetti for a/c appliances and d/c also and then she ran electrical wires into a outlet box to plug her a/c appliances into. There's two people that i've seen do it Jonnie's Journey and also DualEx. Check it out if you can. Great video by the way.
I've watched a few of your build videos. They are very helpful and well done. Your craftsmanship is great. On this one I'm wondering why you put bottoms on the cabinets instead of just screwing into the subfloor? Did you screw the boxes to the furring and the floor?
Great job. I'm 72 years old and my wife and I are not as agile as we used to be. I'm going to build the U shaped bed to hold two 28" cot sized mattresses with barely enough room between to stand up in to get up and around in the night. The space will be approximately 10 to 12 inches wide. The head of the bed, by the back doors, will have a 12" by 36" fill area. That will give a wider space for the top half of our bodies to stretch out and be perfect for sitting up and walking out of the bed area. I probably won't use a fixed, or movable table in the bed area. I love your modular set up. I will leave a toe kick area on the base of the bottom cabinets for walking in and out of the bed area. Kind of like the toe kick under kitchen cabinets. The front of each side cabinet could even be sloped wider at the floor. I'll figure all of that out when I get the plywood and tools out. Your video has been a great inspiration. Thanks.
I have watched a number of your videos and am very impressed. You have so much more information than other videos. Thank you so much 😊
Thank you! I try my best to include as many helpful details as I can 👍🏻
Girl, you got skills! And great teacher! Well thought out. I’ve been watching van build videos, getting ideas, for a long time. Yours are the best!
I appreciate the kind words. Thank you for watching and commenting!
Very well put-together video. Clean narration with no extraneous "um's" and "ah's". Good job!
Thank you!!
Bravo. I've enjoyed the 2 1/2 videos I've watched so far. You were comfortable with your tools, gave reasons why you were using a particular method and then explained the assembly process clearly. All key to a good instructional video.
One thing I would suggest that could be helpful to you. Two piece aluminum cutting guides. Together they form a straight edge that is 8'6" long. Individually you have two pieces 4'3" long. Used in conjunction with your circular saw it does the job of a table saw and panel saw. With slightly more Set up involved.
It is hard to push large sheet goods through a tablesaw without surrounding accessory tables. A panel saw is the ticket. However this aluminum cutting guide, several manufacturers make them, Steps in for both tools. It would've helped when you ripped your furring strips, as well as doing your component pieces that were too large to comfortably rip On a table saw.
I look forward to watching the rest of your videos. Do good and have a good time on the road.
I like the u-shaped bed/bench set up w/removeable table... You can sleep 2 either separate or together, and storage is good. Bonus: if you're sleeping two separately; if you have to go to the bathroom at night, there's less chance of waking up the other person.
I LOVE the u-shape too! It’s perfect for my wants and needs. Thanks for watching😁
There are fixed beds where storage can be accessed from inside as well- whether using a hydraulic lift or draw/cabinet door. I like Trent and Allies and Emon and Becs build. Both had fixed beds with separate seating
What a great channel! So many helpful information in one place. Love it. Thank you for sharing!
Thank you for watching and commenting! Glad you found it helpful 😊
You Rock Young Lady!!! Great Educator!! Wish you have one on one lessons!
Thank you! I am now offering 1-on-1 consultations if you’re interested.
I’m so impressed with your building skills and knowledge. This is going to be a strong well built van. I can’t wait to see a tour once it’s done. I’m interested in knowing where you got your wood working skills. You should seek out going onto the Gutted series where they have a team of people that have to build out a vehicle in 5 days. You would be an extreme asset to a team!
Thank for your kinds words, they mean so much. Believe it or not, this was the first time I have ever built anything out of wood. Crazy what the internet can teach you. And yes, I LOVE gutted and just sent in my application for season 3. Fingers crossed😁
@@LaurenLawliss OMG Girl! I’m rooting for you. Once they see your videos you’re in! I’m totally shook this is your first rodeo with building 🤯 I’m obsessed with your videos and learning from them. Good luck and keep us posted!
Hahaha thank you, thank you☺️
@@LaurenLawliss you show us everything for a well built van. The details on insulating was impressive. I was SMH the entire time saying to my wife where did she learn these skills? She said, if she could do it you could do it. I’m not sure about that you have patience and an eye for perfection.
@@jpl0202 Thank you! I am glad the details are helpful. You got this - best of luck😄
As always, great job Lauren. Well thought out, well executed. Can't wait to see the next build section. Nice that you have all the tools and space needed to get the job done. Congrats.
Thanks so much! 😊
Very nice. I love the way you plan ahead. Plus, I see you now have outfeed support for the table saw. Well done. Glad I subscribed.
Welcome to the channel!
Hi Lauren… I’m so glad I came across your channel….. just bought a 2023 Dodge Ram Promaster 2500 159 wb. I have been looking at your videos and have decided I want a u-shaped bed/dinnett/lounge area!!!!! You make it look so easy…. I have no knowledge about building a van but I am doing it anyways 😮😊 thank you for sharing your experience. I am a 67 year old who wants to be able to travel the United States and be Free! I will definitely continue to watch your videos and learn from YOU ❤😊 YOURE AWESOME 👏
You do explain and give good information about the product you used help us to make our discussion. Are you a teacher your steps is excellent
This was the most amazing thing I've ever seen! You're an expert! 💯🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩
Hahaha thank you!
As a builder of all things, including cabinets, I'm really enjoying your descriptive video's. I watch and have watched a good amount of video from van life builders and one thing I've seen time and time again and that is that even though I'm sure you'll never have an accident and spill on your cushions while drinking coffee in bed some morning, other people have. They discovered mold growing on the wood and quickly realized it was there because there was no ventilation between the cushion and the wood face it sat on. I'm sure you have that covered but I thought I'd mention it.
Thank you for the kind words - I really appreciate it. Yes, mold is also something I have heard of too so it’s something I will keep an eye on for sure and adapt if I need too 😄👍🏻
I really like the way you referenced other bed types and and who did them, awesomeness
Thanks! Glad you liked it.
I love how detailed you are and how well you preplanned. Thank you for not gatekeeping. Subscribing immediately!
You’re so welcome! Thanks for watching, commenting and subscribing 🫶🏻
Really well thought out and built. Only change I might have made is the section for your sport equipment, with the rear of the box able to fold down or be removed so that that section could have been easily accessed from the rear of the van as well. But that might not be an issue for you.
Great suggestion! I don’t foresee it being an issue for my needs, but that might be a good idea for someone else. Thanks for sharing😊
Awesome work Lauren
Thanks!
I'm Anxious to see this unit completed.
I’m really happy with the final product 😆
Great video Lauren
Thanks for the kind words.
Great video!! thank you for taking the time to record and share your wonderful build
Thank you for watching and commenting!
Impressive skills and knowledge! Great work 👏
Thank you!!! 😊
Thanks Lauren, you given me some good options regarding how you did your central floor walkway storage boxes.
Glad you found it helpful. Thank you for watching and commenting!
I've watched a few of your videos and agree with all the comments praising your teaching skills. Clear, concise and comprehensive. A+ And your craftsmanship. I have one question on this one- why did you make bottoms to the benches instead of just screwing into the sub floor? Also, do you have any squeeking and creaking now? Is there anything you could have done to eliminate them?
The holes you made to get into your storage spaces, a hole saw would work, with your jigsaw, then sanding the edges so they are rounded
If someone wants a circle hole then sure. I wanted an oval shape as it makes more sense for a hand to reach in☺️
@@LaurenLawliss I think what they're saying is, use the hole saw drill bit to make a round hole on each side of the oval template, then jigsaw out the center to make your oval cutout. Then smooth around the edges.
You are amazing!!! Thank you for this level of detail. You have a new subscriber❤
Thank you so much! Welcome to the channel.
Very well thought out and well explained. Thanks!
You’re welcome! Glad you found it helpful.
Lauren, I’m surprised I can give you any tips, but have you ever tried the bit device fore hinges, it’s a self centering bit, works awesome on hinges. I’m 64 and finally bought one a few years back.
I have not tried that tool before but will check it out, thanks!
You are lucky having a garding/place for the workshop. nice work.
Yes, very lucky to have this space to work on the build!
Wow love your build. I am doing my 3rd build. I like the access to batteries and water. But I also like to have the stationary bed. But lagoon to put near the passenger seat once it is swiveled. Haven't really decided yet. Thank you for sharing.
The bed setup was one of the biggest and hardest decisions I had to make, but I’m happy with the convertible option for MY wants and needs. I also have a lagun table mount for my passenger swivel seat and love it.
Great job .thank you ❤❤❤❤❤❤❤
I like the bed design.The vans coming along pretty nice.
Thank you : )
Job well done Girl!!!!
Appreciate it!
Nicely done!
Appreciate it!
Most use a hole saw for finger holes, so much cleaner/easier to
I agree. For some reason I wanted an oval shape at the time for my whole hand to fit 💁🏼♀️
You are very good and a pleasure to watch.
Awh, thank you☺️
Awesome work!!! Looks great!!! Good idea using the lighter half inch
Thank you!!!
Great skills and gorgeous too😍
Thank you!
If all goes according to plan I will get a 136 Promaster high top in spring of 2024. I am 99% sure I have decided on the u-shape bed as well except the portion along the back door I plan on making wide enough for a twin mattress. That way I have my lazy fixed bed for 99% of all days and the nook seats would only be big enough for one person each. I also plan on making one nook seat flip up to reveal the composting toilet and the other nook seat would have an opening to a litter box for my cat. Your design looks like it could get 5 people around the table where my design would accommodate only 3, but I get my always ready bed for always effortless naps.
How exciting! I like your approach. Best of luck :)
Lauren you are doing great work. I love your planning and being meticulous 😛🥰😆
Thank you for your kind words!
R.E.S.P.E.C.T!!!
Thank you!!!
Great video!
Thank you!!
Another great video. Things are moving along nicely and I've picked up a few more tips for my build ;) Have you given any thought to possibly a louvered vent for the shoe box area and possibly the other boxes to allow air circulation? Can't wait to see your electrical and plumbing build-outs.
Thank you. Great question! I am planning on adding vent openings on the back of the two side boxes. Still trying to determine my approach for the middle boxes. Electrical will be coming soon ;)
Nicely Done!
Thank you!
🌷Thank You🌻
❤❤❤❤❤
thanks 4 the great summary of sleeping area layouts 🙇wonder what the bed width turned out to be in your case? :) ty
Glad you liked the video. My bed is 54 inches by 71 inches
You are doing a fantastic job of building the way you want it done and taking your time wish you a good year from an old guy in Minnesota winners coming but I still move around and do exercise anyway take care and good luck with all your endeavors 😇🌞☕🤗
Thank you!
wow! what a great video! very nice job! this was very helpful. It is important to plan it out and take your time and your video shows that very well. I'm going to subscribe and watch your videos from the start of the build.
Thank you for the kind words and welcome!
Such a great video!!!
Thank you!☺️
Looking good! But why did you added bottoms to all boxes? Adds expense and weight. Some strips at both ends would have enough to keep it square and attach to subfloor if needed.
For sure. In hinge sight I agree, but this was early on and the first time I’ve built any cabinetry so at the time this made the most sense to me.
I wonder for a bed if a high quality easy chair recliner could be used for a bed. There are those that plug in and can be heated or even have masage and the back and leg support move independently and stretch out to be flat or almost flat. I wonder if you ever say that or considered that. I doubt they are as flexible as the options you showed here, but I think they would be more comfortable and could even be removed and put into a tent, or under a folding cover. I cannot see how well they would fit in a van like yours or how flexible the space around it would be. But, it would probably require the least amount of work and you could also sell it if it didn't work.
Could certainly be done if that’s what you wanted to do. I would never consider that based on my wants and needs, but everyone is different 😊
I have an add on. When i did my last build i did not leave an opening for the spare tire release.
Looks like the tire release is under the van for me so shouldn’t be an issue ☺️
Great videos! Informative and well documented.
Question on this video as to why you installed a bottom to your bed boxes vs anchoring to your subfloor?
Thanks! Good question. This was very early in my build so I was still learning as I went. In hindsight, I suppose the bottoms are not necessary😆
Great video. You are excellent at explaining and demonstrating througout the entire video. Q: can you supply a link for the purchase of the water tank? Happy new year!
Thank you so much! I bought my fresh water tank from Class A Customs. They have many different sizes to choose from😄
Really good info, thank you
Thanks!!
Well thought out. What are the final bed dimensions (full, queen, etc.), and how do you fit in it?
Thanks! The bed is 54 inches (front to back) by 71.5 inches (wall to wall). I find the bed dimensions plenty for me and comfortable :)
Cool work
Thank you!
Nicely done
Thanks!
8:50 - what is that little blue tool you are using to drill a pocket hole? That's pretty cool. I've never seen it before.
That is the Kreg 320 Pocket Hole jig. Since then I have upgraded to the Kreg 720 Pro Pocket hole jig - an absolute must!!!
Lauren, wouldn’t it have made sense to make your setup, but make it with the storage underneath? Then you’d have tons of storage and a natural place to also put bedding? Then the stuff you put under your bed maybe could be moved and better use of space? Just curious, not critical because you did as nice a build as I have ever seen. Very creative, talented, and well thought out, just curious if you would do it differently today?
Thanks the comment. I wanted everything in the van to be easily accessible from the inside so this was the perfect solution for my wants and needs. I’m very happy with it and wouldn’t change a thing 😁
really great video. just curious how did you attach them to the wall/floor of the van?
Thanks for the comment! I fastened the to the subfloor and furring strips with screws in multiple locations. Also the weight of the electrical and plumbing helps to hold it in place☺️
that is a really good work, can't wait to see the result
Thank you!!
Lauren, how has your van conversion worked out? I know, I need to search your videos and find out, lol
The van is 95% complete, just have some small finishing projects. Haven’t worked on the van in a year - just enjoying life and traveling. Check me out on Instagram @LaurenLawliss for van life updates!
Good job
Thank you!
Great video. I’m curios - did you do a weight and balance calculation for your build? Disclaimer: I’m an airline pilot.
Thank you! I did weigh my van before the conversion and did consider the placement of everything for optimal balance. So yes😁
Like everyone else, I'm impressed with your skills, Lauren! One question (again, sorry): did you screw the side boxes to the low section furring strips? What did you do with the center and back boxes? are they attached to the floor? I'm not sure this would be my bed choice since the fixed one is quite simpler, but you keep inspiring me out of my comfort zone 👌
Thank you! So the original plan was to drill the boxes to the furring strips. So far I’ve only permanently install one box and I just screwed it down into my subfloor. I plan on doing that with the other three boxes too. Keep the questions coming, I’m happy to add my two sense. I know you can do this bed style if you choose, you got this!!🤩
Excellent! Thank you for your kindness and patience with me 🤲
Anytime🥰
Love your videos! I’ve been stuck on electric for months and so ended up just not working on my van at all out of frustration, and I finally feel motivated again because of how straightforward your explanations are! Curious if you think it’s necessary to have a bottom on the box? I’ve already installed my flooring so wondering if I can just leave the box without a bottom?
Thanks for your comment, Madeleine! I hear you. Sometimes taking a break from the build is necessary. It can be overwhelming and frustrating at times.
Great question! No, I don’t think a bottom on my bed boxes were necessary. It’s fine with or without a bottom. I added a bottom because I knew I’d be moving the boxes around a lot before permanently installing them so the bottoms helped them stay in tacked. But if I did it over again knowing what I know now, I might skip the bottoms to save on weight and space. But totally up to personal preference.
Good luck with the rest of your build! You got this!
@@LaurenLawliss That makes sense! I hadn’t thought about that - definitely easier to move them around when they have a bottom! Also curious for your thoughts on using 1/2” Sande ply? I’ve had a really hard time finding Baltic Birch. Unfortunately it’s only 3 layers, not 9 like yours, but wondering how crucial that is in your opinion?
Honestly, I LOVE baltic birch plywood. It has so many benefits and I really tried hard to find what I have. At the end of the day, other plywood will get the job done so it is up to personal preference. If you are near the Tampa, Florida or Utica, NY area let me know because I know two places that have some baltic birch.
if you ever quit the vanlife you could probably be a cabnet maker or carpenter,you have talent..
Hahaha I do love building cabinetry. So much fun🙌🏼
Hey, where did you happen to find that TwoWanderingSoles van photo? It doesn't seem to be their personal van and I'm hoping to check out more photos of that build.
Hey there! I went back and looked a little more closely. The owner of the van is actually @rydawell. Good luck!
@@LaurenLawliss Appreciate it. Thanks!
Anytime!
Thanks Sweet Girl, this is great
Thanks for watching🤩
Love your videos! What editing software do you use?
Thanks! I currently use iMovie.
❤shoes! Haha 😊 my wife will probably need a tow truck 😂
Shoes 👎🏻 Barefoot 👍🏻😆
Lauren, I've watched this video I think 100 times as I'm getting ready to build mine. Did you screw your box to the furring strips? I was going to screw the wheel well sides directly to cross nuts I'm installing as I'm not using furring strips and was wondering if that would work.
Yes, I screwed the wheel wheel boxes to the furring strips and the subfloor. If you don’t have furring strips, I’d trust screwing the boxes to the subfloor and one another (the subfloor ain’t going anywhere). Hope this helps 😄
@@LaurenLawliss as you know this can be a daunting process so appreciate the guidance.
@@shelly2024blessings 100% - you got this! One step at a time 😁
@@LaurenLawliss thanks! I've been overwhelmed trying to figure it out on my own. I'm grateful for your superb tutorials. I've watched all your videos over and over again and as I've mentioned before, you're an incredible teacher!
I appreciate the kind words💖
Bravooo!!!
Thank youuuuu
You are a very pretty and handy girl
Thanks!
What about if one of the two side is a place put out side grill and prep area for food
I plan on having a fold down table to do such things 😄
@@LaurenLawliss ok but you ask what to do so I thought if our side you want to have a place to prep and cook to
@@samson7770 Yes! When I originally built the bed area two years ago I wasn’t 100% sure but have narrowed down some ideas to just that. Appreciate the idea 😄
@@LaurenLawliss sorry just to give idea like you ask did not mean to offend you
I am not offended - all friendly convo here 😁 thanks for the idea!
I'm curious, why not buy a portable power station like a bluetti for your electrical needs instead of battle born batteries?
Thank you for your question! Personally, I didn’t want to deal with the hassle of setting up the portable system every time I needed to power something. Also, my electrical setup will be powering all my 12v DC and 120v AC appliances so through my calculations, I require a large amount of power for everything. The portable setups are great options for certain needs, but not for mine. Hope this helps!😊
@@LaurenLawliss Ok I understand, but I recently saw a video from a van builder that used her bluetti to power both DC (puck lights and fan) while simultaneously powering a/c appliances. She hooked up a fuse box to the bluetti for a/c appliances and d/c also and then she ran electrical wires into a outlet box to plug her a/c appliances into. There's two people that i've seen do it Jonnie's Journey and also DualEx. Check it out if you can. Great video by the way.
I'll check them out. Thanks!
Lauren how many times have you messed up measurements 😮
I am human so I do make errors. But my attention to detail and ability to think things through has prevented me from making too many mistakes
Lauren, it appears that you and myself are very much alike 😆👍🥰🤗
❤❤❤
💖💖💖
👍👍👍👍👍
Having lived with it do you find the step annoying?
Not at all! I love the added storage and lift for my legs when I’m sitting on the couch.
@@LaurenLawliss great! Everything you did was so well thought out and providing the measurements was super useful! Thanks!
Glad to hear!
Have you considered a ‘rock and roll’ bed?
I did not.
Nice build but u-shape is hardly original
I wasn’t going for originally, I was going for what worked best for my wants and needs - and I did throw my own twist on it compared to others 😄
I've watched a few of your build videos. They are very helpful and well done. Your craftsmanship is great.
On this one I'm wondering why you put bottoms on the cabinets instead of just screwing into the subfloor? Did you screw the boxes to the furring and the floor?
You will be pleasantly surprised how many ppl want you to build their RV.
I love it!!! When someone tells me they are thinking about it I tell them to do it!!!
Can you convert van to a rv and getting paid for it?
At this time I’m not looking for another project, sorry 🫶🏻
It must be a great feeling knowing that you can build and create your own projects without anyone's help!very satisfying!
100%!!!