Unlike a lot of other videos I’ve found, you took the time to really break it down and explain for those of us who are not Tec. I REALLY appreciate that. Thank you
The problem is when he started the video, he had only 1 monitor. After pluggin the second monitor and updated drivers at 2:34, you have 2 monitors working and you get the left side (monitor #1) and right side (monitor #2) speakers.. Now he sound like he's center. Wait till he gets #3 and #4 on, then it's srs surround sound.
Nice presentation. You speak slowly and demonstrate exactly what you are doing in an easy to understand fashion unlike a great many others that go to fast, skip steps, or assume you know the missing steps. Thank you.
By far the best step by step explanation...one question, he said one adapter per monitor, but laptop only has two conections..how is he keeping the others connected???
Hi Ercilia. You're right! You run out of USB ports fast. I had to add a USB HUB to clean up clutter. Feel free to check out my NICE ADDITION TO A ONE USB PORT CRISIS video 0:44 and also my NIGHTMARE BEHIND THE DESK to checkout how it looks when it is installed 0:22.
Thanks a lot for this wonderful video. I have an old desktop but I did add a PCIE card with USB 3 that I put in and I have two Dell monitors which is connected to one HDMI port and a vga port. I am keen to add two more but don't have the same monitors . Will this still work.
My apology for skipping the step where I relocated the second monitor adapter to a USB port on my right side of the laptop. You can see the third adapter @ 10:55. Thanks for watching.
At 10:41 you connect the 3rd monitor but you only have 2 adapters. How's this possible? Also how can I connect 3 monitors if I have only 2 USB ports? I also have 1 him and 1 usbc port.
My apology Burak. I didn't record myself disconnecting the second adaptor and plugging it on the right side USB port. You'll see that it is plugged @ 10:55. Thank you for watching.
Great video!!! Question….. I have 2 VGA monitors (and 2 vga to hdmi converters.) If I get a USB 3.0 to dual hdmi (MTS) will that work to have 3 displays?? I just don’t wanna spend the $70 and Have to deal with a refund. I know the USB.30 to dual hdmi will work. But only if it goes directly into a HDMI device. Not sure if I can use both converters??? Help?
Thank you for reaching out. I avoid the USB to multiple monitor adaptors for my office use. So, I apologize, I don't know what the adapter's capacity will be. Most of these 1 to 2, 3 etc adaptors do not output similar resolution to each monitor. One at higher than the other/s. Because of that I buy a 1 USB to one output adaptors. Look into the brand of adaptor in the video. They usually include two passive adaptors with each USB unit.
Very clearly explained each step , I have a question , I have dell i5 processor 8gb ram laptop , I want to connect 2 more additional expanding my monitor space , I have 2 usb port and 1 HDMI port so can i connect 1 monitor using hdmi port and 2nd by converting usb to hdmi port ? Appreciate your effort 😊
@@T9RPZz I tried it but did not work for me because one monitor is very old and other one is new so new one is working fine but old one is not working well because of screen resolution , make sure when you use two monitor it should match the specification of screen you are using in laptop then definitely it will work. Hope you got my point
Hello. I have a Desktop Computer. My primary monitor is of viewsonic brand. I want to connect second monitor of different brand and resulation. Both have VGA cable. Primary monitor is directly connect to CPU using VGA socket. Can i connect my second monitor to CPU using VGA to USB and use both monitors in expand / extended mode? Pls reply sir as fast as you can.
@@Betzareoff hii sir. Thanks for quick reply.. My father want dual monitor setup for trading. But we don't have required budget to buy new setup. Can you send me the cheapest buy link of USB to VGA adapter. I live in India. Pls sir.
Hi Can explain this , I've two separate systems and monitors but, actually what I need, When I work System "A" the display should come "A" Monitor and Monitor "C" and the same When I work system B, the display should come "B" and "C Monitor also. Is that possible ? II think its little bit got confused you, How to connect and what are the equipment's needs for this to be done. ( I've already VGA Switch)
Hi i got 4 dell moniters and linking to my laptop i got 4 usbs to VGA adaptors 2 screens are on youtube other 2 just on desktop picture how do i get all screen on youtube do i need the adaptor u shown thanks
Hi. The closest you come to watching RUclips on four monitors on Chrome browser is to 1st expand chrome to all four screens and 2nd select theater mode. That covers about 3/4" of your screen. Enjoy
Hi there loved the video and learned so much. Just one question my laptop that is about three years old has only one hdmi output and 3 usb ports. If I wanted to extend to two further monitors could I use the hdmi output on my laptop for one and a use an hdmi output in conjunction with the adaptor for the second additional monitor? Any info would be great. My laptop is an HP Many thanks.
Hi. Thank you for watching. Yes, you can use the HDMI output/port for one. I’m unclear on how you plan to attach the second but I’ll give a general Windows OS port identification. The challenge with HDMI & VGA ports is that Windows only sees one port (in your case one HDMI) and only sends one signal and manages one signal out of that port. So, if you were to use HDMI signal splitters, you'll only see one signal on all the monitors that you attach to your one HDMI port. Now, for your incremental upgrade, you only have to add one of the adapters reviewed (any adapter with Displaylink chip) to make use of your second monitor by attaching via USB. The USB advantage is, Windows can support 127 devices. Theoretically, you can attach that many USB hubs plus USB to VGA/DVI/HDMI adapter combo to send/receive signals and mange output to. Let me know if this helped.
sir is it OK to add 3 more monitors to the laptop? will it make the VGA Card broken ? any limitation ? thanks a lot for sharing sir :-) keep up the share
Hi BestGuide, are you plugging all three monitors to one VGA using a signal splitter? If so, it does not affect the VGA port but all monitors show the same signal. Let me know if that helped. I'm happy to assist. Thank you for watching and subscribing.
I have similar issue, but I am not using it in docking station. 1 laptop Rog strix scar2 2 external monitors of Dell p2419hc. One screen is on HDMI port (working fine) Other screen (3rd) is with mini DP to HDMI adaptor. All 3 can see in display settings but 3rd screen is not showing anything.
Hi I have 2 laptops ; a new one and and old one. how can I have my old laptop be used as a 2nd monitor for my new laptop . Can i used what you were using in the video?
I have a hp computer desktop, and I have a Hisense smart flat screen tv has my second monitor. I have tv monitor connected to the computer by Hdmi on the computer tower. I need to add a 3rd monitor for work. But it uses VGA, but I only have one VGA on computer tower that is being used for hp monitor. I did buy a VGA adapter to hdmi, but all of my Hdmi are being used. What do I need to get to hook up my 3rd monitor to computer now. Please I need help, lol!
Hi Sharon. This USB adapter or any brand with Displaylink chip is what you need. The featured adapter comes with VGA, HDMI and DVI adapters @0:28 . Some brands may not include the passive adapters but you can buy separately. Thank you for watching
I have integrated graphics Card, cpu with VGA and Display port, and 2 VGA input Monitor. Please guide on what connector or cabels to use for Dual monitor
If I'm reading this right, you have a PC that has a video card with a VGA and display port output ports and 2 monitors with VGA input only ports. If so, you can connect your PC to one of monitors using a VGA to VGA cable , for the second monitor you'd use a display port to VGA cable to connect the second monitor. Thank you for reaching out
I have a laptop that stays closed on a docking station. I currently have 2 monitors connected to the docking station via display port. I bought 2 more monitors with dvi connectors and found out the laptop won’t identify them. Will the PC allow me to add these 2 additional monitors for a total of 4 with the adapter you are showing?
Hello, I have a problem where im using a docking station for dell with a dell laptop. im trying to connect 3 displays and use the laptop screen as well but so far it will only let me use 3 displays. either three monitors and laptop screen is blank, or laptop screen and two monitors. any idea what the problem may be? thanks!
Dell products are strange like that. Try this, when all three monitors are on, select the laptop screen (if it shows that you have four displays), follow steps at 5:42 to select your laptop screen, from the drop down menu in the MULTIPLE DISPLAYS section where you can select to extend...etc, see if "disconnect this monitor" is selected for your laptop screen. If so change to extend to this monitor. If this does not work try when only two displays and the laptop screen are working and perform the steps. If If neither steps solve your problem, it might be Dell's docking station programming limitation. I'd also suggest testing on a different brand laptop
@@Betzareoff I found out that my graphics card on Dell laptop is gtx 1650 and is only capable of displaying 3 screens. Whether I extend or duplicate only 3 displays work
@@Noneyaviz13 perfect! Now, if you'd like to add a fourth monitor/display, use one of these USB adaptors with Displaylink chips. Thank you for watching
Hi Rocrave. I have not tested DVI to DP. But DP with MST, Multi-Stream Transport, capable cable and monitors allows you to connect at least up to two DP MST enabled monitors. Please check compatibility of your monitors before investing. Thank you for reaching out.
Hello my desktop only have the available two ports: HDMI and VGA are already connected to the two monitors. Can I add another monitor with DVI-D and VGA port to the unused USB 3.2port?
Hi Zahid. That depends on the type of adapter that you have/plan on buying. The one I reviewed had a USB to active DVI and uses passive HDMI adapter to connect HDMI cables. If you buy an active USB to HDMI, you can connect direct to HDMI cables. Now, if you have an HDMI port on your computer 1:31, you can plug directly to your computer and follow the rest of the instructions to set up your display.
I do my best. Yes it works on desk top hardware wise and yes the DVD drive will read the drivers. Wanted to mention, this hardware is now plug & play on Windows 10. Thank you for watching.
Hello. Thank you for reaching out. My apology for not including in my video that I have moved my second video adaptor to the USB port found on my right side of the laptop (missed step is found in video @ 10:55 ). Sorry about the confusion. All the steps are the same for each monitor though. Connect USB adaptor to VGA/HDMI/DVI cable like I did when I connected the first adaptor, then connect adaptor to USB port on laptop.
Would this work if my monitor didn’t have an HDMI port but if I do a VGA to HDMI and then plug it to my computer with a usb to HDMI. I’m trying to connect a third monitor and already using my desktops HDMI port
Dear Sir, Could you please help me about Settings of multiple Monitors with Laptop.. At 3:45, You selected Duplicate Option but after selecting or applying this option, Now It should be displayed on both Monitors, But, in your case, not happening or not showing on both screen same. Because In our college, I connected Projector to Laptop by using VGA to HDMI(Because Laptop does not VGA Port). So, That time It was showing in Main Laptop Screen Only. I did not know that What had be to done on that time. I was totally blind Please I am kindly requesting you to help me in this regard in a detailed manner. Warm Regards, Basavaraj, From India.
@@internationaljacques7248, Dear Sir, Still I have doubts in my case and problem not yet been solved here. Could you please help in this regard now? I am questioning that.... whether I have to make second monitor as extended mode before duplicating ? And selecting the second monitor and reduce the resolution of second monitor.... and then select Duplicate Mode. is it correct way of what I am doing over here ......? Please Help me, Heartily Thank you for your previous reply. Kind Regards, Basavaraj, From India.
@@internationaljacques7248 Dear Sir, Still I have doubts in my case and problem not yet been solved here. Could you please help in this regard now? I am questioning that.... whether I have to make second monitor as extended mode before duplicating ? And selecting the second monitor and reduce the resolution of second monitor.... and then select Duplicate Mode. is it correct way of what I am doing over here ......? Please Help me, Heartily Thank you for your previous reply. Kind Regards, Basavaraj, From India.
Hi Basvaraja, To duplicate my laptop monitor, I selected my laptop monitor and chose "make this my main display" first. Once you do that, please choose the projector (projector number is found by clicking on the "identify" icon) you want to display on and select "duplicate desktop on 1 and 2 or 1 and 3. For example if I want to show what's on my laptop monitor on my number 3 monitor in my video, I'd choose "duplicate desktop on 1 and 3" from the multiple displays section with my apology for the super slow reply.
@@Betzareoff Dear Sir, Thank you for reply and your kind words regarding this subject. Any way, It does not matter that,...delay in reply. it only matters that......it should be understood of concept of how it is going to work in real scenario. That is very very Important for me, For that, I bow my head down and express gratitude to you Sir. I will try now in My computer laboratory.. If in case I have queries regarding this, I will put it over here. Heartily Thank you Once Again, Basavaraj, From India,
No need for that unless you're not an admin. Please check the multiple displays section is not set to "disconnect this display" for the monitor that's blank/black
Thank you for the video and your presentation was easy to follow. I have a laptop and two monitors. I've completed your steps, but, the other two monitors would display the same number two. What went wrong???? Do you mind showing a video to correct my problem?
Hi. Would you let me know what brand and model your adapter is please? I had similar problem when I used a passive HDMI two-in-one adapter. The two monitors that are connected to this adapter mirrored/displayed the same screen #. I'll look for your reply. Thank you for watching.
@@veronicaperry8990 That's definitely a passive adapter. It is a pass through type so all displays show the same thing on all monitors that are connected to it. I recommend buying an adapter that has a Displaylink chip in the adapter (most advertise that it has one).
@@Betzareoff Hello. Thank you for your help. I'm going to order an adapter from Amazon. I have VGA Male cable on monitor. which adapter would I purchase? Thank you
Hello. This information was pretty useful and understandable as well. Thanks for that. I just got a quick question. Is it possible to connect only 1 monitor through adapter and second monitor through HDMI?
Hi. If you're asking about four monitors using four adaptors, yes. You can also use a combination of ports like HDMI, VGA and USB adaptors, yes you can.
Any idea on why I can only activate 2 displays out of 3 on my laptop? One is vga, another is hdmi and the third is the laptop. I am using latest 20H2 Windows
Yes. First go to 2:28 and find the "Multiple displays:" tab. Once you locate that option for your computer, select the display that is off and see if the setting is set to "disconnect this display". If so, change it to extend desktop to this display. I have my laptop monitor set to "disconnect this display" when I have my multiple monitors connected. Thank you for reaching out and watching. Be safe
The best tasks for me are increasing the ability to add/run multiple monitors from my laptop and, after I added a USB hub, reducing the amount of cable that's connected to my laptop.
Hi @ Mikey. If you are referring to the length on the USB adapter, no. I use a USB hub that I connect the adapters to and use a long USB extension cable to connect the hub to my laptop. Hope that answers your question.
hi there! I am trying to connect both monitors. Is the multi-display adaptor the only thing I need?? or do I need to install a graphics (video) card?? thank you!
Absolutely! Feel free to view the one USB port crisis video in the description. I use a powered hub and run all my accessories through one port (best with USB 3.0 and up).
Hi great video ... Could you help me please...... i thinking to update my actual computer and i'm thinking to buy this MSI computer (Msi Gs65 Stealth I9 9na 32gb 1tb Ssd Rtx2070 8g). I wonder if you can help me telliing me if i can connect 3 aditional monitors TO EXTEND my working space, so in that way includin the PC monitor i could have a total of 4 monitors: 1st extra monitor to the Hdmi Port 2nd extra monitor to the Mini Display Port 3rd extra monitor to the Type C thunder Bolt port The other possible Laptop is this one (MSI GE66 Dragonshield 10SFS-426 15.6" 300Hz 3ms Gaming Laptop Intel Core i9-10980HK RTX2070 ). Do you know if i can do the same thing in this Laptop Thanks again!... Please help meeee Bye
Is it more cpu or gpu demanding to have both screens, currently i have a tv conecvted via vga to my laptop and only use the tv but i want to have both for some programs to show on the laptop. Would it affect the performance?... I dont want to demand too much from the "video card"
Hi. These active USB video adapters have DisplayLink chips that processes your video instead of the builtin video card. Only limitation I've observed is on the USB 2.0 video adapters where the data transfer rate is low (only has 400mbps (64MBps) Vs USB 3.0 5gbps (640MBps).
5 лет назад
@@Betzareoff What? They have usb that process the images?
Well, not the USB port itself but the adapter does via the USB port (referred to as active adapter). Here's www.displaylink.com/ a link to the company behind the technology.
i tried to extend my laptop display to two monitors using hdmi splitter with one input and 2 outputs. I connected the laptop to the splitters input using hdmi cable, then connect the 2 monitors to each splitters output. Then I set the settings to 'extend'. The display successfully extend but only to one monitor. The other monitor only mirrors the other monitor. Why is that?
Hi Karl, Windows, in my opinion, only sees one HDMI port. I had the same problem when I used a VGA splitter, mirrored signal. Thank you for reaching out.
How come you have 4 monitors and only one HDMI that you're connecting to the plugable USB 3.0? I have two monitors with one HDMI cable each, how do I turn these into one??
Hi, monitor 1 is my laptop, 2 & 3 are USB to VGA. I added monitor 4, HDMI, to show that the USB adapter can send signal to a variety of display types simultaneously. You may have to use a USB adapter for one and direct connect to HDMI for your second monitor.
Thank you for your careful description of this procedure.I have two monitors that are not HDMI (DELL) but my computer is very recent. It has am HDMI port. I am wondering if it is possible to link these older monitors to this HDMI laptop. If yes, the Plugable gadget you used could go both in the HDMI port or in the USB port right? many thanks
Hi Jose. The answer your question is no. There is an adapter that is an active HDMI to VGA you can buy from Plugable. But the adapters I reviewed are USB to HDMI/DVI/VGA only.
@@Betzareoff Hello. First thank you for responding to the question. I had the same. Also what is the purpose of a passive connection ever? Is there ever a benefit for that type of connection versus an active one for USB in any variety of device configurations? Thank you for your time and consideration for response.
The passive connectors only have signal pass through without signal amplification and relies on the computer graphic/video processor. I had used a passive Mini Display port to a VGA HDMI DVI combo that was only capable of duplicating the desktop when I connected two monitors. If you're only passing through signal to one monitor, no problem. These passive adapters are actually included with the USB adapter I reviewed. At least these guys are generous enough to include the passive adapters instead of selling you three separate units. Please follow link below to see what's included ruclips.net/video/5jB_41fcZQ0/видео.html
You bet! Locate the drop down menu next to the "multiple displays". The last choice is an option to disconnect (disable) the monitor that you select. Choose your laptop monitor and select disconnect. The additional monitor/monitors must be connected to perform this. Please go to 2:30 minutes in my video for the visual reference on where to find the "multiple displays" drop down menu if needed.
@HARIPRASATH I searched this "usb video adapter displaylink" and found the product I reviewed and other alternate brands that use the same tech on Amazon India. Please search using these terms.
Hi. My thought is, if you're going to upgrade your computer sometime in the near future buy the 3.0 adapter which will work with a 2.0 port. It is compatible.
Yes. As long as you have a USB port. Feel free to view this ruclips.net/video/GhtR99UQ-hY/видео.html video where I used a Surface Pro using the same USB video adapters (not displayed). I'd highly recommend using a hub like the one reviewed here ruclips.net/video/L5Up55btKu4/видео.html to expand the ports capability for additional USB connections.
@@Betzareoff I’ve just found it mate so basically I already have a Toshiba laptop 💻 vga out to second monitor so if I buy this item can I run it to my 3rd minister which is flat screen tv that’s got vga and hdmi on pc vga my laptop at the moment is as followed Laptop man in monitor vga out to second monitor that gives me two screens On this second monitor it does have dvi port as well I’ve already tried the Amazon dvi in that’s got a hdmi our to 3 screen but dot work
@@kayone8571 Glad you found it. The three in ones I found just mirror the main monitor. The USB with DisplayLink adaptors give you the third monitor capability. You can use the adaptor I reviewed and use one of the included passive adaptors @ 1:24 to mate to your TV.
Yes you can. It is a bit slower when it comes to watching videos, RUclips for reference, online. I started out with USB 2.0 adapters and upgraded 3.0 to make best use of the ports on my computer.
@@Betzareoff Thank you for the info. Unfortunately I only have USB 2.0 on this laptop. How much slower do you think it would be if using this device www.ebay.com/i/323301483970?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=323301483970&targetid=595076254448&device=c&mktype=pla&googleloc=9015920&poi=&campaignid=6470474296&mkgroupid=76413868734&rlsatarget=aud-622524042958:pla-595076254448&abcId=1140476&merchantid=8543784&gclid=CjwKCAiAwZTuBRAYEiwAcr67ORYhJzVFSFpQUxapqbMiR3wTRm8avoR3ksPJCuTjAH10dLjGzp6_5hoCKwwQAvD_BwE
Hi. My apology for the late reply. I started out with a USB 2.0. I upgraded when high resolution videos would not play smoothly (similar to buffering).
You can plug these adapters directly to your laptop if you have three USB ports on it. If it does not, please view my "NICE ADDITION TO A ONE USB PORT CRISIS" vid, link is in description.
@@Betzareoff i have HDMI and 2 USB3..i plug one monitor to HDMI and i got USB3 to HDMI . But when i go to display screen only show monitor 1 and 2. When i click on Detect , it suport to show another monitor but it keep say didnt detect another display. Please help.
Hi Kai. My apology for the late reply. I don't have the HDMI enabled monitor anymore to test that. Please check in the setting if it turns that HDMI port off. I have my laptop monitor off by default when I use my monitors.
Unlike a lot of other videos I’ve found, you took the time to really break it down and explain for those of us who are not Tec. I REALLY appreciate that. Thank you
My left ear loved this video.
same
I diagnosed that my right ear is deaf after watching this video.
Ditto... same .. haha
Same
The problem is when he started the video, he had only 1 monitor. After pluggin the second monitor and updated drivers at 2:34, you have 2 monitors working and you get the left side (monitor #1) and right side (monitor #2) speakers.. Now he sound like he's center. Wait till he gets #3 and #4 on, then it's srs surround sound.
Nice presentation. You speak slowly and demonstrate exactly what you are doing in an easy to understand fashion unlike a great many others that go to fast, skip steps, or assume you know the missing steps.
Thank you.
Thank you that you not only bla-bla (as others), but you directly show how it work.
Thank you for watching
YOU ARE THE BEST MANUAL, CLEAR AND UNDERSTOOD. THANKS
Thank you for watching. There'll be a Win 11 vid with USB C hardware in the near future once a stable OS is installed.
By far the best step by step explanation...one question, he said one adapter per monitor, but laptop only has two conections..how is he keeping the others connected???
Hi Ercilia. You're right! You run out of USB ports fast. I had to add a USB HUB to clean up clutter. Feel free to check out my NICE ADDITION TO A ONE USB PORT CRISIS video 0:44 and also my NIGHTMARE BEHIND THE DESK to checkout how it looks when it is installed 0:22.
This is very helpful for my husband who is using his laptop
Thank you for watching
Superb sir,very clear and methodical.
Very helpfull indeed,
Thanks a lot this was one of the best tutorial in you tube
You're welcome. Thank you for watching. An updated vid in the works.
Great presentation. What is the brand and model of the UBS display adaptor please?
Pluggable UGA-DP-S
Keep Uploading more and more content like this!
I love your video you are Awesome Sauce you just put me on another level with my advanced schooling thanks man Blessings to you
Thank you for watching...Love your comment
Thanks a lot for this wonderful video. I have an old desktop but I did add a PCIE card with USB 3 that I put in and I have two Dell monitors which is connected to one HDMI port and a vga port. I am keen to add two more but don't have the same monitors . Will this still work.
Hi. You can make any size or brand work. I'd recommend using one of these USB to xxxx adapters for the new monitors.
Nice video presentation..congrats
Thank you so much for watching and subscribing. Great vids coming soon.
You plugged the 3rd monitor into the same port you plugged the 2nd monitor into. Where did the cable for the 2nd monitor go?
My apology for skipping the step where I relocated the second monitor adapter to a USB port on my right side of the laptop. You can see the third adapter @ 10:55. Thanks for watching.
Thank you for taking the time to explain.. truly appreciated
You're welcome. Thank you for watching
At 10:41 you connect the 3rd monitor but you only have 2 adapters. How's this possible? Also how can I connect 3 monitors if I have only 2 USB ports? I also have 1 him and 1 usbc port.
My apology Burak. I didn't record myself disconnecting the second adaptor and plugging it on the right side USB port. You'll see that it is plugged @ 10:55. Thank you for watching.
Great video!!!
Question….. I have 2 VGA monitors (and 2 vga to hdmi converters.)
If I get a USB 3.0 to dual hdmi (MTS) will that work to have 3 displays??
I just don’t wanna spend the $70 and Have to deal with a refund.
I know the USB.30 to dual hdmi will work. But only if it goes directly into a HDMI device. Not sure if I can use both converters??? Help?
Thank you for reaching out. I avoid the USB to multiple monitor adaptors for my office use. So, I apologize, I don't know what the adapter's capacity will be. Most of these 1 to 2, 3 etc adaptors do not output similar resolution to each monitor. One at higher than the other/s. Because of that I buy a 1 USB to one output adaptors. Look into the brand of adaptor in the video. They usually include two passive adaptors with each USB unit.
@@Betzareoff thank you so much for responding. I truly appreciate it.
Very clearly explained each step , I have a question , I have dell i5 processor 8gb ram laptop , I want to connect 2 more additional expanding my monitor space , I have 2 usb port and 1 HDMI port so can i connect 1 monitor using hdmi port and 2nd by converting usb to hdmi port ?
Appreciate your effort 😊
Absolutely right! HDMI direct to monitor and a USB to HDMI adapter to second monitor for the second. Thank you for watching.
@@Betzareoff thank you
Hey mate, did you end up doing this & did it work? Thanks
@@T9RPZz I tried it but did not work for me because one monitor is very old and other one is new so new one is working fine but old one is not working well because of screen resolution , make sure when you use two monitor it should match the specification of screen you are using in laptop then definitely it will work. Hope you got my point
Hello. I have a Desktop Computer. My primary monitor is of viewsonic brand. I want to connect second monitor of different brand and resulation. Both have VGA cable. Primary monitor is directly connect to CPU using VGA socket. Can i connect my second monitor to CPU using VGA to USB and use both monitors in expand / extended mode? Pls reply sir as fast as you can.
Hi. If you are asking about using a USB to VGA adaptor for your second monitor that has a VGA cable, then, yes, you can.
@@Betzareoff hii sir. Thanks for quick reply.. My father want dual monitor setup for trading. But we don't have required budget to buy new setup. Can you send me the cheapest buy link of USB to VGA adapter. I live in India. Pls sir.
Hi. I recommend a PCI video card for a desktop
Hi Can explain this , I've two separate systems and monitors but, actually what I need, When I work System "A" the display should come "A" Monitor and Monitor "C" and the same When I work system B, the display should come "B" and "C Monitor also. Is that possible ?
II think its little bit got confused you, How to connect and what are the equipment's needs for this to be done. ( I've already VGA Switch)
Hi i got 4 dell moniters and linking to my laptop i got 4 usbs to VGA adaptors 2 screens are on youtube other 2 just on desktop picture how do i get all screen on youtube do i need the adaptor u shown thanks
Hi. The closest you come to watching RUclips on four monitors on Chrome browser is to 1st expand chrome to all four screens and 2nd select theater mode. That covers about 3/4" of your screen. Enjoy
Hi there loved the video and learned so much. Just one question my laptop that is about three years old has only one hdmi output and 3 usb ports. If I wanted to extend to two further monitors could I use the hdmi output on my laptop for one and a use an hdmi output in conjunction with the adaptor for the second additional monitor? Any info would be great. My laptop is an HP Many thanks.
Hi. Thank you for watching. Yes, you can use the HDMI output/port for one. I’m unclear on how you plan to attach the second but I’ll give a general Windows OS port identification. The challenge with HDMI & VGA ports is that Windows only sees one port (in your case one HDMI) and only sends one signal and manages one signal out of that port. So, if you were to use HDMI signal splitters, you'll only see one signal on all the monitors that you attach to your one HDMI port. Now, for your incremental upgrade, you only have to add one of the adapters reviewed (any adapter with Displaylink chip) to make use of your second monitor by attaching via USB. The USB advantage is, Windows can support 127 devices. Theoretically, you can attach that many USB hubs plus USB to VGA/DVI/HDMI adapter combo to send/receive signals and mange output to. Let me know if this helped.
sir is it OK to add 3 more monitors to the laptop? will it make the VGA Card broken ? any limitation ? thanks a lot for sharing sir :-) keep up the share
Hi BestGuide, are you plugging all three monitors to one VGA using a signal splitter? If so, it does not affect the VGA port but all monitors show the same signal. Let me know if that helped. I'm happy to assist. Thank you for watching and subscribing.
Can you use a port USB hub and do the same but with just one usb from the laptop?
Absolutely! Check out this ruclips.net/video/L5Up55btKu4/видео.html video
thanks for the video, helps a lot. question, when you use the USB adapters, is the HDMI port still usable?
My experience in most cases is yes, it is still usable. I've had inquiries where some had a disabled port.
I have similar issue, but I am not using it in docking station.
1 laptop Rog strix scar2
2 external monitors of Dell p2419hc.
One screen is on HDMI port (working fine)
Other screen (3rd) is with mini DP to HDMI adaptor.
All 3 can see in display settings but 3rd screen is not showing anything.
Can u still do this if u don't have a laptop?
Hi I have 2 laptops ; a new one and and old one. how can I have my old laptop be used as a 2nd monitor for my new laptop . Can i used what you were using in the video?
Hi C. The USB adapter may not do that but you can search for the keywords how to use a laptop as a second monitor. Thank you for watching.
I have a hp computer desktop, and I have a Hisense smart flat screen tv has my second monitor. I have tv monitor connected to the computer by Hdmi on the computer tower. I need to add a 3rd monitor for work. But it uses VGA, but I only have one VGA on computer tower that is being used for hp monitor. I did buy a VGA adapter to hdmi, but all of my Hdmi are being used. What do I need to get to hook up my 3rd monitor to computer now. Please I need help, lol!
Hi Sharon. This USB adapter or any brand with Displaylink chip is what you need. The featured adapter comes with VGA, HDMI and DVI adapters @0:28 . Some brands may not include the passive adapters but you can buy separately. Thank you for watching
Hi can I connect this to a kvm switch? I need to connect my desktop and laptop with 3 monitors.
Yes you can. Please watch my kvm switch video for a simple switch that I use.
Very nice, one question - where did you but this USB something ?
Shop link please ?
Hi Konrad. Their site takes you to Amazon.
Hi I have an issue with this set up Would you be able to guide ? cheers
You bet Larry! I'm happy to
Thank you!!!
I have integrated graphics Card, cpu with VGA and Display port, and 2 VGA input Monitor. Please guide on what connector or cabels to use for Dual monitor
If I'm reading this right, you have a PC that has a video card with a VGA and display port output ports and 2 monitors with VGA input only ports. If so, you can connect your PC to one of monitors using a VGA to VGA cable , for the second monitor you'd use a display port to VGA cable to connect the second monitor. Thank you for reaching out
Hey superb video
Thank you for watching
I have a laptop that stays closed on a docking station. I currently have 2 monitors connected to the docking station via display port. I bought 2 more monitors with dvi connectors and found out the laptop won’t identify them. Will the PC allow me to add these 2 additional monitors for a total of 4 with the adapter you are showing?
If your laptop recognizes any USB device you connect to it, then yes this will work.
Hello, I have a problem where im using a docking station for dell with a dell laptop.
im trying to connect 3 displays and use the laptop screen as well but so far it will only let me use 3 displays. either three monitors and laptop screen is blank, or laptop screen and two monitors. any idea what the problem may be?
thanks!
Dell products are strange like that. Try this, when all three monitors are on, select the laptop screen (if it shows that you have four displays), follow steps at 5:42 to select your laptop screen, from the drop down menu in the MULTIPLE DISPLAYS section where you can select to extend...etc, see if "disconnect this monitor" is selected for your laptop screen. If so change to extend to this monitor. If this does not work try when only two displays and the laptop screen are working and perform the steps. If If neither steps solve your problem, it might be Dell's docking station programming limitation.
I'd also suggest testing on a different brand laptop
@@Betzareoff I found out that my graphics card on Dell laptop is gtx 1650 and is only capable of displaying 3 screens.
Whether I extend or duplicate only 3 displays work
@@Noneyaviz13 perfect! Now, if you'd like to add a fourth monitor/display, use one of these USB adaptors with Displaylink chips. Thank you for watching
so we can't connect triple monitor with only one dvi cable to dp cable? you need adapter?
Hi Rocrave. I have not tested DVI to DP. But DP with MST, Multi-Stream Transport, capable cable and monitors allows you to connect at least up to two DP MST enabled monitors. Please check compatibility of your monitors before investing. Thank you for reaching out.
Hello my desktop only have the available two ports: HDMI and VGA are already connected to the two monitors. Can I add another monitor with DVI-D and VGA port to the unused USB 3.2port?
Yes! You can add more monitors using USB adapters.
Really good video. Thank you.
Thank you for watching.
Amazing and informative tutorial tks a lot .
Thank you for watching
Can you send me the link to the exact model you purchased.
You bet!
plugable.com/products/uga-3000
@@Betzareoff Video is over 3 years old and you responded with the quickness. Awesome, I appreciate your response.
Thanks for the Tutorial....Can this also be done with Windows 8.1 OS and 10
Yes
Hi Gadi. Please read the compatibility note on the adapter you're considering on buying. I've used Windows 7 & 10.
@Betzareoff Hi.Thank you for sharing this nice informative video. Just wanted to know what if we use directly USB to HDMI connector? Will it work?
Hi Zahid. That depends on the type of adapter that you have/plan on buying. The one I reviewed had a USB to active DVI and uses passive HDMI adapter to connect HDMI cables. If you buy an active USB to HDMI, you can connect direct to HDMI cables. Now, if you have an HDMI port on your computer 1:31, you can plug directly to your computer and follow the rest of the instructions to set up your display.
Do you need a driver instal if you do it via hdmi to usb adapter
No driver needed for Windows 10. Thank you for watching
I dont know if you're reading comments still but, Would this possibly work on a Desktop? With a DVD drive for The Drivers.
I do my best. Yes it works on desk top hardware wise and yes the DVD drive will read the drivers. Wanted to mention, this hardware is now plug & play on Windows 10. Thank you for watching.
@@Betzareoff So no drivers required for Windows 10?
Correct! I didn't have to install on my two Windows 10 PCs. It, the PCs, recognized the adapter when I connected it to the USB port.
@@Betzareoff Oh cool! Thanks!
Please give any link to buy this connectors or others products the same specifications
Hi. New links are now live in description.
I wish you showed what wires and steps you did to add 3rd monitor.
Hello. Thank you for reaching out. My apology for not including in my video that I have moved my second video adaptor to the USB port found on my right side of the laptop (missed step is found in video @ 10:55 ). Sorry about the confusion. All the steps are the same for each monitor though. Connect USB adaptor to VGA/HDMI/DVI cable like I did when I connected the first adaptor, then connect adaptor to USB port on laptop.
Would this work if my monitor didn’t have an HDMI port but if I do a VGA to HDMI and then plug it to my computer with a usb to HDMI. I’m trying to connect a third monitor and already using my desktops HDMI port
You bet! That'd work. Thank you for reaching out.
i have connected two monitors but i want to use the application differently on two of the computers please help
Hi Michel. What are you trying to do?
Dear Sir,
Could you please help me about Settings of multiple Monitors with Laptop..
At 3:45, You selected Duplicate Option but after selecting or applying this option, Now It should be displayed on both Monitors,
But, in your case, not happening or not showing on both screen same.
Because In our college, I connected Projector to Laptop by using VGA to HDMI(Because Laptop does not VGA Port).
So, That time It was showing in Main Laptop Screen Only. I did not know that What had be to done on that time. I was totally blind
Please I am kindly requesting you to help me in this regard in a detailed manner.
Warm Regards,
Basavaraj, From India.
Basavaraj Chougala try looking on the keyboard where the numbers are and hold shift and press the number that has the picture of monitors on it
@@internationaljacques7248,
Dear Sir,
Still I have doubts in my case and problem not yet been solved here. Could you please help in this regard now?
I am questioning that.... whether I have to make second monitor as extended mode before duplicating ?
And selecting the second monitor and reduce the resolution of second monitor.... and then select Duplicate Mode. is it correct way of what I am doing over here ......?
Please Help me, Heartily Thank you for your previous reply.
Kind Regards,
Basavaraj, From India.
@@internationaljacques7248
Dear Sir,
Still I have doubts in my case and problem not yet been solved here. Could you please help in this regard now?
I am questioning that.... whether I have to make second monitor as extended mode before duplicating ?
And selecting the second monitor and reduce the resolution of second monitor.... and then select Duplicate Mode. is it correct way of what I am doing over here ......?
Please Help me, Heartily Thank you for your previous reply.
Kind Regards,
Basavaraj, From India.
Hi Basvaraja,
To duplicate my laptop monitor, I selected my laptop monitor and chose "make this my main display" first. Once you do that, please choose the projector (projector number is found by clicking on the "identify" icon) you want to display on and select "duplicate desktop on 1 and 2 or 1 and 3. For example if I want to show what's on my laptop monitor on my number 3 monitor in my video, I'd choose "duplicate desktop on 1 and 3" from the multiple displays section with my apology for the super slow reply.
@@Betzareoff
Dear Sir,
Thank you for reply and your kind words regarding this subject. Any way, It does not matter that,...delay in reply. it only matters that......it should be understood of concept of how it is going to work in real scenario.
That is very very Important for me, For that, I bow my head down and express gratitude to you Sir.
I will try now in My computer laboratory.. If in case I have queries regarding this, I will put it over here.
Heartily Thank you Once Again,
Basavaraj, From India,
I'm not sure if someone asked already, but is this possible with a desktop computer as well?
Yes it does. Thank you for watching
What are you do run as admin, monitor can be black screen?
No need for that unless you're not an admin. Please check the multiple displays section is not set to "disconnect this display" for the monitor that's blank/black
Are there any special hardware requirements or just 2 monitors and 2 adapters?
Hi. Nope. Just monitors and adapters. The adapter has a built in video processor.
Thank you for the video and your presentation was easy to follow. I have a laptop and two monitors. I've completed your steps, but, the other two monitors would display the same number two. What went wrong???? Do you mind showing a video to correct my problem?
Hi. Would you let me know what brand and model your adapter is please? I had similar problem when I used a passive HDMI two-in-one adapter. The two monitors that are connected to this adapter mirrored/displayed the same screen #.
I'll look for your reply. Thank you for watching.
@@Betzareoff Hello. Thank you for responding. I'm using VGA Y Splitter. It has to separate VGA display. Thank you
@@veronicaperry8990 That's definitely a passive adapter. It is a pass through type so all displays show the same thing on all monitors that are connected to it. I recommend buying an adapter that has a Displaylink chip in the adapter (most advertise that it has one).
@@Betzareoff Hello. Thank you for your help. I'm going to order an adapter from Amazon. I have VGA Male cable on monitor. which adapter would I purchase? Thank you
@@veronicaperry8990 Hi, I use the Plugable brand reviewed @ 1:21 in this video. It is the most complete adapter.
Hello. This information was pretty useful and understandable as well. Thanks for that. I just got a quick question. Is it possible to connect only 1 monitor through adapter and second monitor through HDMI?
Yes you can.
Can I do this if I have a laptop with CD drive?
Hi. This USB adapter, if that's what you are referring to, works with/without CD drive.
what would happen if you have one adapter for one monitor, and you connect the HDMI directly to the laptop for a second monitor?
That works! Thank you for watching.
can you add 4th monitor?
Hi. If you're asking about four monitors using four adaptors, yes. You can also use a combination of ports like HDMI, VGA and USB adaptors, yes you can.
Any idea on why I can only activate 2 displays out of 3 on my laptop? One is vga, another is hdmi and the third is the laptop. I am using latest 20H2 Windows
Yes. First go to 2:28 and find the "Multiple displays:" tab. Once you locate that option for your computer, select the display that is off and see if the setting is set to "disconnect this display". If so, change it to extend desktop to this display. I have my laptop monitor set to "disconnect this display" when I have my multiple monitors connected. Thank you for reaching out and watching. Be safe
Good day sir how can u use them in different task please?
The best tasks for me are increasing the ability to add/run multiple monitors from my laptop and, after I added a USB hub, reducing the amount of cable that's connected to my laptop.
Is there a longer cable??
Hi @ Mikey. If you are referring to the length on the USB adapter, no. I use a USB hub that I connect the adapters to and use a long USB extension cable to connect the hub to my laptop. Hope that answers your question.
@@Betzareoff thanks for helping people
@@Betzareoff I found a cable
@@MikeyVlogsWasTaken sweet!
hi there! I am trying to connect both monitors. Is the multi-display adaptor the only thing I need?? or do I need to install a graphics (video) card?? thank you!
If two monitors, you'll need two adapters. The chipset in these adapters does the video processing.
Could you run these through a USB hub to get even more displays running as I don't have many USB on my new laptop
Absolutely! Feel free to view the one USB port crisis video in the description. I use a powered hub and run all my accessories through one port (best with USB 3.0 and up).
Can all monitors be set in extended display?
Hi Victor. That's how I use mine. Set up one monitor/display at a time.
I have a problem. I don’t know if I can run dual monitors with the lynx pc that I’m getting the monitors are the Alienware 240hz
If Lynx by Digital Storm, the OS is Windows. It is capable. Check the graphics card ports when you receive it.
Does this lose any graphical fidelity? Say I have a 144 refresh rate monitor, can I still do 144 refresh rate through these adapters?
This is refreshed @ 60HZ. Thank you
@@Betzareoff thanks. So will it maintain that 60 hz refresh rate or is there a chance it might dip below to 50 for example?
@@remyd8767Not sure. Plugable states 60 on their site.
GREAT VIDEO FRIEND! Can any of this be done wirelessly?
Hi. I apologize I have not tried that. These adapters must be connected.
thanks sir
Thank you for watching
Thank you
Hi great video ... Could you help me please...... i thinking to update my actual computer and i'm thinking to buy this MSI computer (Msi Gs65 Stealth I9 9na 32gb 1tb Ssd Rtx2070 8g). I wonder if you can help me telliing me if i can connect 3 aditional monitors TO EXTEND my working space, so in that way includin the PC monitor i could have a total of 4 monitors:
1st extra monitor to the Hdmi Port
2nd extra monitor to the Mini Display Port
3rd extra monitor to the Type C thunder Bolt port
The other possible Laptop is this one (MSI GE66 Dragonshield 10SFS-426 15.6" 300Hz 3ms Gaming Laptop Intel Core i9-10980HK RTX2070 ). Do you know if i can do the same thing in this Laptop
Thanks again!... Please help meeee
Bye
Yes, you can do that. Set up one monitor at a time. Select Extend, Extend, Extend for all monitors. Thank you for reaching out.
Thanks alot
Is it more cpu or gpu demanding to have both screens, currently i have a tv conecvted via vga to my laptop and only use the tv but i want to have both for some programs to show on the laptop. Would it affect the performance?... I dont want to demand too much from the "video card"
Hi. These active USB video adapters have DisplayLink chips that processes your video instead of the builtin video card. Only limitation I've observed is on the USB 2.0 video adapters where the data transfer rate is low (only has 400mbps (64MBps) Vs USB 3.0 5gbps (640MBps).
@@Betzareoff What? They have usb that process the images?
Well, not the USB port itself but the adapter does via the USB port (referred to as active adapter). Here's www.displaylink.com/ a link to the company behind the technology.
i tried to extend my laptop display to two monitors using hdmi splitter with one input and 2 outputs.
I connected the laptop to the splitters input using hdmi cable, then connect the 2 monitors to each splitters output. Then I set the settings to 'extend'.
The display successfully extend but only to one monitor. The other monitor only mirrors the other monitor. Why is that?
Hi Karl, Windows, in my opinion, only sees one HDMI port. I had the same problem when I used a VGA splitter, mirrored signal. Thank you for reaching out.
Question: Does this one work on older laptops that has only USB 2.0?
Hi. Yes it does. It is limited to the USB 2.0 data transfer rate but will work. Thank you for watching.
How come you have 4 monitors and only one HDMI that you're connecting to the plugable USB 3.0? I have two monitors with one HDMI cable each, how do I turn these into one??
Hi, monitor 1 is my laptop, 2 & 3 are USB to VGA. I added monitor 4, HDMI, to show that the USB adapter can send signal to a variety of display types simultaneously. You may have to use a USB adapter for one and direct connect to HDMI for your second monitor.
Thank you for your careful description of this procedure.I have two monitors that are not HDMI (DELL) but my computer is very recent. It has am HDMI port. I am wondering if it is possible to link these older monitors to this HDMI laptop. If yes, the Plugable gadget you used could go both in the HDMI port or in the USB port right? many thanks
Hi Jose. The answer your question is no. There is an adapter that is an active HDMI to VGA you can buy from Plugable. But the adapters I reviewed are USB to HDMI/DVI/VGA only.
@@Betzareoff Hello. First thank you for responding to the question. I had the same. Also what is the purpose of a passive connection ever? Is there ever a benefit for that type of connection versus an active one for USB in any variety of device configurations? Thank you for your time and consideration for response.
The passive connectors only have signal pass through without signal amplification and relies on the computer graphic/video processor. I had used a passive Mini Display port to a VGA HDMI DVI combo that was only capable of duplicating the desktop when I connected two monitors. If you're only passing through signal to one monitor, no problem. These passive adapters are actually included with the USB adapter I reviewed. At least these guys are generous enough to include the passive adapters instead of selling you three separate units. Please follow link below to see what's included ruclips.net/video/5jB_41fcZQ0/видео.html
Is there a way to disable the laptop screen and use only the monitor screens present?
You bet! Locate the drop down menu next to the "multiple displays". The last choice is an option to disconnect (disable) the monitor that you select. Choose your laptop monitor and select disconnect. The additional monitor/monitors must be connected to perform this. Please go to 2:30 minutes in my video for the visual reference on where to find the "multiple displays" drop down menu if needed.
@@Betzareoff got it. Thanks man
Do I need to have usb 3.0 in my laptop to get it working?
No. It is compatible with older version. Thank you for watching
What if your CPU doesn't have its own graphics if you're using a graphics card and you're short of output ports ?
That's what's nice about these USB adapters. Functions at the speed of your USB (USB 2.0 is slower and shows).
So if my CPU doesn’t have it’s own graphics still these USB adapters will give output ?
@@mayankbhandari7250 that is correct!
Thank you
Important and useful information
Love it, that is what I want
Thank you for watching
Dude i need to purchase this product, But my bad luck is not available my country(INDIA)!! Is there any other way to purchase dude🤔❓
@HARIPRASATH I searched this "usb video adapter displaylink" and found the product I reviewed and other alternate brands that use the same tech on Amazon India. Please search using these terms.
Is there any form to do it Bluetooth or wireless?
One from Microsoft comes to mind.
Betzareoff hi, just wanted to know if do i need a USB 3.0 in my computer? Does this work on USB 2.0? Thanks
Hi. My thought is, if you're going to upgrade your computer sometime in the near future buy the 3.0 adapter which will work with a 2.0 port. It is compatible.
Your videos would be even better with better lighting
Make sure you have more than 4 or 8gb of ram
I agree with you. Thank you for taking your time to comment.
I had only my right AirPod in and I was really confused
LOL! Thank you for watching.
well done ! thanks for help
Can this be used with a 3 in 1 pc?
Yes. As long as you have a USB port. Feel free to view this ruclips.net/video/GhtR99UQ-hY/видео.html video where I used a Surface Pro using the same USB video adapters (not displayed). I'd highly recommend using a hub like the one reviewed here ruclips.net/video/L5Up55btKu4/видео.html to expand the ports capability for additional USB connections.
Are you in the MIPI Alliance by any chance?
No sir
Great work
linux support?
Non for now from the brand I reviewed.
Plz do it using cpu
Hi, if you mean a desktop, the process is the same.
Where is the link
Hi...please follow this cutt.ly/pe6ou7Q link to find vendor near you. Thank you for watching
@@Betzareoff it’s strange that one you have in video isn’t on that link I’ve subscribed
@@Betzareoff I’ve just found it mate so basically I already have a Toshiba laptop 💻 vga out to second monitor so if I buy this item can I run it to my 3rd minister which is flat screen tv that’s got vga and hdmi on pc vga my laptop at the moment is as followed
Laptop man in monitor vga out to second monitor that gives me two screens
On this second monitor it does have dvi port as well I’ve already tried the Amazon dvi in that’s got a hdmi our to 3 screen but dot work
@@kayone8571 Glad you found it. The three in ones I found just mirror the main monitor. The USB with DisplayLink adaptors give you the third monitor capability. You can use the adaptor I reviewed and use one of the included passive adaptors @ 1:24 to mate to your TV.
Worked perfectly!
Audio is broken
So true! Left ear only. Thank you for reaching out.
Can you install this setup using USB 2.0?
Yes you can. It is a bit slower when it comes to watching videos, RUclips for reference, online. I started out with USB 2.0 adapters and upgraded 3.0 to make best use of the ports on my computer.
@@Betzareoff Thank you for the info. Unfortunately I only have USB 2.0 on this laptop. How much slower do you think it would be if using this device www.ebay.com/i/323301483970?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=323301483970&targetid=595076254448&device=c&mktype=pla&googleloc=9015920&poi=&campaignid=6470474296&mkgroupid=76413868734&rlsatarget=aud-622524042958:pla-595076254448&abcId=1140476&merchantid=8543784&gclid=CjwKCAiAwZTuBRAYEiwAcr67ORYhJzVFSFpQUxapqbMiR3wTRm8avoR3ksPJCuTjAH10dLjGzp6_5hoCKwwQAvD_BwE
Hi. My apology for the late reply. I started out with a USB 2.0. I upgraded when high resolution videos would not play smoothly (similar to buffering).
Can i connect 3 monitors to laptop?
You can plug these adapters directly to your laptop if you have three USB ports on it. If it does not, please view my "NICE ADDITION TO A ONE USB PORT CRISIS" vid, link is in description.
@@Betzareoff i have HDMI and 2 USB3..i plug one monitor to HDMI and i got USB3 to HDMI . But when i go to display screen only show monitor 1 and 2. When i click on Detect , it suport to show another monitor but it keep say didnt detect another display. Please help.
Hi Kai. My apology for the late reply. I don't have the HDMI enabled monitor anymore to test that. Please check in the setting if it turns that HDMI port off. I have my laptop monitor off by default when I use my monitors.