👆👆👆 Be sure to read the description box, you will find valuable information there.👆👆👆 Download the FREE PLANS: www.christofix.com/everyone-can-sharpen-drill-bits-with-this-jig/ Get yourself a cool item & support me: christofix.etsy.com Become a RUclips member: ruclips.net/user/ChristofixDIYProjectsjoin or become a Patreon member: www.patreon.com/christofix …and get access to special membership benefits. Connect with me on Instagram, Facebook, Pinterest, and Twitter. Links are in the description. Greetings, Christofix
Hallo Christophe, vielen Dank für das teilen Deiner Entwicklung dieses Jigs! Manche Probleme erkennt man erst beim Machen und Du hast es super gelöst!!!! Liebe Grüße 🖖 Susanne
Hallo Susanne. Vielen Dank für Ihre lobenden Worte. Es war ein kleines Problem, aber ich habe nie darüber nachgedacht. Glücklicherweise gibt es für alles eine Lösung. Danke für deine Nachricht. Grüße Christophe
Hi Again, This is a very good Jig. What I really appreciate is that you didn't make a slick video, you have highlighted your search including the (logical) mistakes. There are few RUclipsrs who show this, super. I find this one really useful and cost effective, I really will build this one. Thanks for sharing. Keep it safe, it is not over yet. Willy from Belgium. 😷😷😷
Здраво и хвала на посети. Два различита угла обезбеђују да се бургија може још оштрије наоштрити. Све димензије се могу наћи на бесплатним плановима на мојој веб страници. Поздрав, Цхристопхе
@@vucko0261 Извињавам се, погрешно сам разумео ваше питање. Два угла су 118 степени и 135 степени. Надам се да сам могао да вам помогнем са овим. Поздрав Цхристопхе
Thanks, Steve. That' a good thing yours already have that table. My grinder is an old one, I think over 40 years. With this table, I gave it a pretty good upgrade. Thanks for watching, buddy. Greetings
As I always tell people if it’s sharp enough to cut it’s better than it was. The main angles are the tip, you can cut anywhere between 115-140* and it will still cut and the relief angle has to be between 8 and 12 degrees. Unless your a machinist the bit doesn’t have to be perfectly centred but it should be as close by eye as possible. You can make a bit cut up to a mil or so oversized if you don’t pay attention. I also find if all your drilling is wood and aluminum at high speed you can actually go slightly more aggressive with the relief angle to increase drilling speed.
I like this! Do you think this could also be used as a way to make some extra $ sharpening drills bits for others? I'm wondering about a side gig and if this would be worth the while? Cool work! 😇😎😀
I think you can do that with this jig, Jeffrey! That is a good idea. Sharpening drills is really easy and fast thanks to this tool. I'm glad to see that this idea can help you. Greetings Christophe
For rigidity reasons the drill should not extend out more than 3/4". 1725 rpm should be the maximum. 1200 rpm is even better when driven by belt. I use a silicon carbide grinding wheel because it will slowly break down and never get dull. The trick is to always travel the full width of the wheel.
Thank you for sharing this tip with me and other viewers, John. That is much appreciated. Thank you for taking the time to write this down in a comment. Greetings, Christophe.
Hi, buddy. You are indeed right! I did not make that before and after test. Maybe I will make an extra video on that. Thanks for watching, my friend. Greetings, Christophe
Hoi Henk-Jan. Leuk om te zien dat je deze tool kan gebruiken in jouw werkplaats. Je mag me gerust een mailtje sturen met de maten die je graag had gekregen. Mijn email adres staat in de beschrijving onder de video. Dankzij jouw feedback zal ik misschien de plannen kunnen bijwerken. Groetjes Christophe
Music is a personal thing, you either love it or you don't. With the mute button, everyone can decide for themselves whether to listen to the music or not while the video can still be viewed. I hope the idea in this video inspired you. Thanks for watching, and see you next time. Regards, Christophe
@@christofix Sorry for not mentioning that I liked the content a lot. I am totally aware of the personal aspect of the music and i also tried to watch it muted but from time to time you start speaking and then I had to unmute, mute, unmute etc. What you do is already a great thing and you don't need to enhance it with intense music. I know this discussion would yield nothing but I would suggest you check out many a great youtoubers of similar content-providing hopefully seeing that music is totally unnoticeable with their vidoes... kind regards
@@MuharremGorkem No worries mate! I know there are channels that make videos without music, but that's not kind of my thing. But I think it's a good thing we are all different, that way everybody is served well. I'm glad to see that you liked the idea, and I hope it will inspire you for your workshop. Greetings
![Eminem - Fuel (feat. JID) [Official Lyric Video]](http://i.ytimg.com/vi/t5H_CewqpKA/mqdefault.jpg)
👆👆👆 Be sure to read the description box, you will find valuable information there.👆👆👆
Download the FREE PLANS: www.christofix.com/everyone-can-sharpen-drill-bits-with-this-jig/
Get yourself a cool item & support me: christofix.etsy.com
Become a RUclips member: ruclips.net/user/ChristofixDIYProjectsjoin
or become a Patreon member: www.patreon.com/christofix
…and get access to special membership benefits.
Connect with me on Instagram, Facebook, Pinterest, and Twitter. Links are in the description.
Greetings,
Christofix
Hallo Christophe, vielen Dank für das teilen Deiner Entwicklung dieses Jigs! Manche Probleme erkennt man erst beim Machen und Du hast es super gelöst!!!! Liebe Grüße 🖖
Susanne
Hallo Susanne. Vielen Dank für Ihre lobenden Worte. Es war ein kleines Problem, aber ich habe nie darüber nachgedacht. Glücklicherweise gibt es für alles eine Lösung. Danke für deine Nachricht. Grüße Christophe
Hi
Again, This is a very good Jig.
What I really appreciate is that you didn't make a slick video, you have highlighted your search including the (logical) mistakes.
There are few RUclipsrs who show this, super.
I find this one really useful and cost effective, I really will build this one.
Thanks for sharing.
Keep it safe, it is not over yet.
Willy from Belgium.
😷😷😷
Those are some kind words, Willy. I really appreciate that. Thank you for watching, and see you in the next one.
Greetings,
Christophe
Excellent jig. Thank you for sharing
Thank you so much for your nice comment, my friend.
Greetings
très bonne réalisation bravo et merci pour les plans JpP
Merci beaucoup, Jean Pierre! Je suis ravi que vous ayez apprécié la vidéo et les plans. Continuez à regarder et à soutenir!
Very good 💡 awesome jig. 👍🏻 👍🏻 👍🏻 👍🏻
Thank you so much Martin!
Greetings, Christophe
Поздрав.
Мене занима колики су углови под који бургија клизи према шајби.Два су нагиба
Хвала🙋
Здраво и хвала на посети. Два различита угла обезбеђују да се бургија може још оштрије наоштрити. Све димензије се могу наћи на бесплатним плановима на мојој веб страници.
Поздрав, Цхристопхе
@@christofixДа то ми је познато али бих волео да знам та два угла Хвала и жив био 🙋
@@vucko0261 Извињавам се, погрешно сам разумео ваше питање. Два угла су 118 степени и 135 степени. Надам се да сам могао да вам помогнем са овим.
Поздрав Цхристопхе
@@christofix Хвала много пријатељу и жив ми био е саде ћу да правим 🙋
Nicely done Christophe! My grinder already has an adjustable table. However, if it didn't, I would definitely be building this project. Thanks 👍😉
Thanks, Steve. That' a good thing yours already have that table. My grinder is an old one, I think over 40 years. With this table, I gave it a pretty good upgrade.
Thanks for watching, buddy.
Greetings
Świetna robota. Oby tak dalej. 👍
Dziękuję, Krzysztof. Z przyjemnością czytam te pozytywne komentarze. Dzięki za oglądanie i wsparcie. pozdrowienia, Christophe
Simplemente genial!!!
¡Gracias Ronaldo! Me alegra ver que te gusta este video. Gracias por tu apoyo.
Saludos, Christophe
@@christofix siempre amigo, siempre
As I always tell people if it’s sharp enough to cut it’s better than it was. The main angles are the tip, you can cut anywhere between 115-140* and it will still cut and the relief angle has to be between 8 and 12 degrees.
Unless your a machinist the bit doesn’t have to be perfectly centred but it should be as close by eye as possible. You can make a bit cut up to a mil or so oversized if you don’t pay attention.
I also find if all your drilling is wood and aluminum at high speed you can actually go slightly more aggressive with the relief angle to increase drilling speed.
Thank you for sharing all this knowledge with us. Greetings, Christophe
I like this! Do you think this could also be used as a way to make some extra $ sharpening drills bits for others? I'm wondering about a side gig and if this would be worth the while? Cool work! 😇😎😀
I think you can do that with this jig, Jeffrey! That is a good idea. Sharpening drills is really easy and fast thanks to this tool. I'm glad to see that this idea can help you.
Greetings
Christophe
For rigidity reasons the drill should not extend out more than 3/4". 1725 rpm should be the maximum. 1200 rpm is even better when driven by belt. I use a silicon carbide grinding wheel because it will slowly break down and never get dull. The trick is to always travel the full width of the wheel.
Thank you for sharing this tip with me and other viewers, John. That is much appreciated. Thank you for taking the time to write this down in a comment. Greetings, Christophe.
Ja boren slijpen niet gemakkelijk voor de leek maar wel enorm handig als je het kan
Inderdaad, heel handig. En met deze tool kan echt iedereen boren slijpen. Bedankt voor je berichtje, Thierry. Groetjes Christophe
You forgot to add a 'Project Farm-like before and after test of the drill bit' to your video!
But nevermind I plan to make this anyways! Thanks.
Hi, buddy. You are indeed right! I did not make that before and after test. Maybe I will make an extra video on that.
Thanks for watching, my friend.
Greetings, Christophe
Een mooie tool maar helaas mis ik diverse maten in de tekening. Of staan die ergens anders?
Hoi Henk-Jan. Leuk om te zien dat je deze tool kan gebruiken in jouw werkplaats. Je mag me gerust een mailtje sturen met de maten die je graag had gekregen. Mijn email adres staat in de beschrijving onder de video. Dankzij jouw feedback zal ik misschien de plannen kunnen bijwerken. Groetjes Christophe
Unwatchable because of the intense music... A little tool noise would have been a much better choice.
Music is a personal thing, you either love it or you don't. With the mute button, everyone can decide for themselves whether to listen to the music or not while the video can still be viewed. I hope the idea in this video inspired you. Thanks for watching, and see you next time.
Regards, Christophe
@@christofix Sorry for not mentioning that I liked the content a lot. I am totally aware of the personal aspect of the music and i also tried to watch it muted but from time to time you start speaking and then I had to unmute, mute, unmute etc. What you do is already a great thing and you don't need to enhance it with intense music. I know this discussion would yield nothing but I would suggest you check out many a great youtoubers of similar content-providing hopefully seeing that music is totally unnoticeable with their vidoes... kind regards
@@MuharremGorkem No worries mate! I know there are channels that make videos without music, but that's not kind of my thing. But I think it's a good thing we are all different, that way everybody is served well. I'm glad to see that you liked the idea, and I hope it will inspire you for your workshop. Greetings
Nice jig. Thank you for sharing
Those are some kind words, my friend. I really appreciate that.
Thank you for watching, and see you in the next one.
Greetings.