Jessie James Runs MAGNUM REELS at SEMA 2018
HTML-код
- Опубликовано: 11 дек 2018
- Jesse James, in collaboration with Line-X, built this amazing rig for the SEMA show 2018.
Among other amazing products Jesse selected, he chose to run Magnum Reels, the worlds' best built welding reels.
All footage belongs to Line-X.
I think this is the first thing Jessie James has built that I would actually see myself driving.
I was a Shipfitter for 16 years,The fabrication that went into the bed and bumpers its a tremendous amount of work,
Great build.
I read thos as shoplifter and was like ok.. what does that have to do with fabrication?
@@lhmmhl1 I'm dead right now!!! I read it the same way! Lmfao
This truck is just SO awesome. It’s so far from what other people are doing and not trying to square peg round hole. A truck for a crazy specific audience that would gush even harder on it, but can be appreciated by everyone. I really love it.
I like the whole set up. It’s the imagination that keeps going. Easter eggs all over that rig. Way cool. Very subtle. Custom, yet looks stock.
Kinda wish that I hadn't sold my Bobcat 250 ... I drive a '91 D-350 regular cab with a 5.9l Cummins 5 speed manual , 410 rear end and it has a 7'×12' flatbed ... so many great ideas on this truck ... that Wilton vise , though ! Nice work , Mr. James.
JESSIE JAMES FOREVER!.
Dam that’s nice!!!!!!👍🏾 Jesse does some of the best work ever!!!!!!!
Roll Tide he sure does. He definitely knows how to send it.
Sweet build!
Those trucks are hard to find. Cool sa 200. I just acquired a 1957 Lincoln short hood can’t wait to fix it up
Awesome build 🤘
A real Clean and Functional build
Awesome Build 👍👍
Camera man sucks at his job. All focus was on Jesse instead of what he mad, I mean towards the end Jesse even had to tell him to look inside the cooler because he was just focused on him. There was no walk around of the truck what so ever
Nice signature, I’d expect nothing less.
Awesome build Jessie
Man that is sick. Cool truck
That is an awesome rig !
That set up would save my ass rite about now !!!😆
I'm sure theres a 1000 pro welders that would kill to have this truck. I like it. First gen Cummins are slow stock but you can fix everything yourself if you want to.
totally!
I’ll take slow and reliable , run forever them and 7.3
Hey Jessie you knocked it out of the park man
Damn thats a bad ass rig !!!!
Love the truck
Awesome rig but I would ditch the hood ornament. I love the vive on the flatbed you could make a good living with a Truck like that.
Oh hey Ken.
Sick ass rig!!!
Jesse Working His Magic Again 🤟🏻 #777Slots
Slick rigg
Gorgeous truck… I would drive this daily and I’m not even a welder by trade… 🤣 JK, I would take the welder off and add some custom setup for adding quick bed sides for hauling firewood… what a sweet unit.
What an amazing job on that rig!!! What’s going to happen to it now???
He sold it recently. Check RUclips for it.
Where is the truck now?
Shoulda put bottoms in the rear compartments where the reels are but other than that awesome work Jessie
Sweet
Old school cool
Bad azz 💥💪🏾
What was Sandra Bullock thinking?
Party on Wayne, party on Garth! WHOAAA!!!
-Jesse 30 years later.
Lovin it better than McDickinyamama.
“He actually put ears so it’d look like the pentagram goat”
He’s so proud!
@Viper Six , ??? Pentagrams = badassery= motorcycles??? ... I’ve built but don’t think the pentagram is in any way cool. It’s satanic. I love Jesus !!! Do you???
@@widebody75 hell yes, Jesus does a great job mowing my lawn.
@@WhatnotChaser , not the same guy.
One walks on water and the other waded through the water !!! 🤣😂🤣
I saw the cooler for sale an eBay
I have one of those trucks its a RAMCHARGER!
Damn I like that
No disrespect to Jesse James one of the greatest builders of our era. But being a pipeliner and being around some of the coolest and slickest set ups out there, I would only take the truck and the machine. For those that been out there on the rightaway would understand, for those that haven’t will only hate me. So let it be known
I have many Cummins trucks 2nd gens they are not for work they are old school, this is only a concept.
Very swell.
As a rig welder in Canada you could not give that style of rig to a pipe welder up here . Think snow , -30 ,and rain Top loading tool boxes a no go out side .Think a foot of snow. Cable wraps in a top loading tool box open to the elements on the bottom one muddy road and they are covered with mud gotta like that. Jesse you should have talked to some one like Jake Schofield for a deck design, a northern US rig welder. My last rig was a Black 96 Dodge club cab with box , 3500 with a V10 automatic 4x4 with High speed rear ends cruised at 70mph at 1800rpm in OD ,16mpg , truck fully loaded just under 5 tons . Had a pinned skid unit in the back and a lincoln 200 pinned in the skid . Skid as a unit could be loaded on sloops or foremosts for muskeg (swamp jobs) . Everything for welding was on the skid unit . Extra boxes were in the club part of the cab. 2 aluminum custom boxes 2 top loading tool boxes one in each one. One Behind the drivers seat with 3 draws below the top box for hand tools . the passenger side 2 cubby holes one for grinders the other for grinding and buffing wheels or odds and sods. 12inch beveler wooden rack attached the box. in between the 2 tool boxes was another beveler in a box . out side again there was a beveling band rack on top of the welder . in front of the welder was a tool box over the bullet with remotes and pipe fitting tools. On the sides of the tool box were cable wraps . All the oxy acet bottles on skid ,and spots for fire extinguisher and propane bottles . Jesse can you pull a fifth wheel trailer with your rig ?
Man u ar sour
This truck will never see a day in the field so none of that matters.
This is clearly a show truck built around a theme. You need to grow up, and act your age like a grown man. Pathetic reading all of that.
Bart, thanks for the insight. I'll keep that in mind. My daughter wants to weld pipe .
That's a greater done truck
Its a nice rig bed more like what you see a bead hand run because they don't work off of their rigs as often but off a tack rig.
But it's impractical to work out of.
not many Pipe liners have vice on their truck.
Bs they do
@@jtbassgambler2594 Ever been on a pipe line?
welding ferm was trying to keep up wth ya jesse hear no more about them
That sa 200 is quite compared to my bobcat
A bobcat isn't even in the same ballpark as a SA.
At least with Jesse James building a sema work truck i can actually believe its built to work and not just lipstick on a pig like alot of fast built Sema builds are.
Was definitely funny seeing how many SEMA rigs didn’t even have brake lines hooked up.
@@magnumreels3827 Yea that's funny. Most are just there for a photo op. I prefer the clean but overbuilt look that actually works.
Love the truck but the Texas style deck is limp there no place for fabrication tools Canadian decks is were it’s at
The Lincoln is a 62 or later. If it was 58 it would be a Short Hood.
I still run a 57 it’s a long hood. I also own a 57 short hood. 57 was a split year
@@andysmith3917 Thanks didn't know that
make sure you still have your wallet when you walk by that dude...
Looks like he spent about 15 minutes of planning on it.
This has got something to do with Gas Monkey I think he needs a Will Smith backhand
I had this same truck and it sucked no power.
Kinda …like….so …..kinda ……like ….I don’t know like …..I sound like a dumb ass but like I’m not cause I’m like good at like what I kinda like do 🤔😂😉
Bro looks sooo nervous
Dude don’t know anything about a working truck. Nowhere near a work truck but looks good in a show room
🙄...🥴
DOG TOWN
ask him if he wants to help topple a one world government
Well, I beat together a POS truck with some who-gives-a-shit gear and went to SEMA.
Makes total sense.
Obscurity beckons Jesse...
You jelly!
Imagine all of the people surrounding you on display like some kind of zoo animal...not for me man...idk.
He just ruined that damn cooler
Lol that bed is gayer than two dads and that blue dial has a 3 cyl yanmar so i dont know why he claims its all original
Why do people think he’s still relevant? What a schmuck!
Looks creative stick to hot rods u can't build like us pipeliners
I was cool until he pointed out the pentagram thing or what ever. That shit isn’t cool I don’t care who you are
Then why does Western Welding have this truck??