Chris....Very nice biplane from Horizon. Love to see them adding reverse to these models. Glad the crash damage was minimal...Most us don’t get that lucky. Thanks for sharing. 👍👍
wish they had not put throttle reverse in it as somehow in an early flight I turned it on but had no idea how I did it or that I had done it. Fortunately only a hard landing resulting in a bent landing gear( since bent back) and some hanger rash. The plane has a wide envelop. Even on low rates its roll rate is quick to quick so better use lots of expo. Wonderful plane.
Good quote. Once I mastered the skillful art of crashing... Or making my plane look like a pig looking for truffles.... Nose deep. Then it dawned on me to KEEP IT IN THE AIR..... and if your going to crash make it look spectacular LOADS OF BITS FLYING IN ALL DIRECTIONS.... STAY WELL Brian London
Knowing your talent I read the title and thought YES!!!! Chris finally crashed one (which make me feel not so bad when I do) and then I found out watching it was actually the other guy that crashed it....bummer......LOL. Just kidding....great flying as always Chris and that really does look like a fun plane. A little glue.....a little JB Weld.....some tape it'll be as good as new. That's something I do have experience at....LOL
Haha, I’ve crashed plenty! Just not many on camera. 🤣. My most spectacular one was a big panther at an air show. That one hurt. I see a repair and repaint video in our future... 🤪
With option of 2 elevator spars, an reversing esc, basically this is a Timber X with another wing. LOL. A joke, but I like where E-Flite is going with a lot of their craft lately...giving options for different battery packs an thinking about how it affects the CG. Smart thinking. I initially thought a reversing esc was a gimick, but after many flights with my Night Timber X, I can appreciate it more now when I'm RIGHT at the edge of the runway an not able to swing the tail around.
😂😂😂 So just remind me, who is the better pilot? Don’t put yourself down by calling yourself mediocre. At least you bought that plane home in one piece.
Anyone else experience wing chatter on this plane? Under full speed or high wind conditions the wings flap like crazy! Every time it happens I need to let off the throttle and turn safe on to recover. It scares the crap out of me. Wing is mounted tight. I'm unsure what the heck could be causing this, any ideas?
2200mh battery plenty they are pretty tfings made in Canada real scale have a quik roll rate tor racing and snap to but dont recomend many times remember snap it going up first dont do it to many times once bely landed dint locktite gear but found it 2 weeks later haha
I have a question for you. I trust your judgment and experience. I have an opportunity to buy a Carl Goldlberg 10-300 kit N.I.B for $325. I recently retired so I have the time and the building experience to do this. VS buying the Eflight Ultimate. I'm old school and have always thought balsa flys better. I would appreciate your thoughts. Thanks in advance, Kurt
That’s a good find and the price sounds reasonable. Flying this eflite ultimate got me interested in getting a Goldberg ultimate kit, but I never did. Personally I think the bigger balsa airframe will be more rewarding and probably fly better depending on what you’re wanting to do with it (I.e. 3d vs not).
I was hoping to see rolling harriers. The Eflight video roller was not axial but that just might be the pilot's preference or skill level. There a link to rolling harriers somewhere?
@@Thercgeek Thanks, just got back from the field and my flying buddy (no not me!) landed in a tree 50 feet up on his maiden take off. We tried for hours with no success to get it down. The tail is stuck on one end and looks like a branch has one wing and maybe a landing gear.
Thanks Chris. I am using a bow and arrow with fishing line from my fishing reel attached to the back of the arrow. We have gotten a line across close branches a few times - pulled up a strong parachute chord and been able to shake the plane pretty good but it hangs on. The tail is really in tight - I ask my buddy if he accidentally flipped the back up switch and jammed the tail tight between the branches after he landed it in the tree lol ! We may have to get ruff with it and damage it just to get the electronics back and rebuild the plane.
Very nice looking parcflyer with 3d capabilities, your videos are fun! Bravo! One question: Did you ever try to activate reverse function on edf model by landing as brakes?😄😄😄
Thank you! I have seen some guys use throttle reverse on edfs, but I’ve not tried it myself. It’s not super effect. Certainly not like with a propeller.
I'm pretty sure what really happened was the little guy inside the plane had his head snapped off his spine during the 3D extremes and it was rolling around in the cockpit, then it rolled down and jammed the rudder controls and all the blood also short circuited some of the wiring. Yeah...that's what happened.😉🤕
Chris....Very nice biplane from Horizon. Love to see them adding reverse to these models. Glad the crash damage was minimal...Most us don’t get that lucky. Thanks for sharing. 👍👍
Yeah, all things considered it could have been worse.
wish they had not put throttle reverse in it as somehow in an early flight I turned it on but had no idea how I did it or that I had done it. Fortunately only a hard landing resulting in a bent landing gear( since bent back) and some hanger rash.
The plane has a wide envelop. Even on low rates its roll rate is quick to quick so better use lots of expo. Wonderful plane.
Great flying guys, your 3D skills were super Chris, and yes...I know you can fix it lol, thanks for sharing guys 👊🏼👊🏼👊🏼👍🏼👍🏼🔥
Snap rolls are really authentic. It snapped right in the middle! I would contribute this to faulty altimeter.
Indeed! 🤣
Haha 🤦🏻♂️ good on you for showing it lol 😂 can’t wait for mine to ship preordered it the day it came out can’t wait
You’ll enjoy it, It’s a great flyer!
Poor jarred :( cool lookin bird. Great vid guys
“We don’t make mistakes, we only have happy accidents” ~ Bob Ross 🎨
Haha, yes! I have a shirt with that quote on it 😊
Good quote.
Once I mastered the skillful art of crashing... Or making my plane look like a pig looking for truffles.... Nose deep. Then it dawned on me to KEEP IT IN THE AIR..... and if your going to crash make it look spectacular LOADS OF BITS FLYING IN ALL DIRECTIONS....
STAY WELL
Brian
London
haha, I love it!
Happens to the best of us!!!👍
Knowing your talent I read the title and thought YES!!!! Chris finally crashed one (which make me feel not so bad when I do) and then I found out watching it was actually the other guy that crashed it....bummer......LOL. Just kidding....great flying as always Chris and that really does look like a fun plane. A little glue.....a little JB Weld.....some tape it'll be as good as new. That's something I do have experience at....LOL
Haha, I’ve crashed plenty! Just not many on camera. 🤣. My most spectacular one was a big panther at an air show. That one hurt. I see a repair and repaint video in our future... 🤪
Dudes! Awesome flights👍
If you must crash...get it on camera.
In this hobby 'C'est la vie'
True story! 😂
If you weren't supposed to crash, they wouldn't have all those spare parts. Great video.
Right?! ;)
With option of 2 elevator spars, an reversing esc, basically this is a Timber X with another wing. LOL. A joke, but I like where E-Flite is going with a lot of their craft lately...giving options for different battery packs an thinking about how it affects the CG. Smart thinking. I initially thought a reversing esc was a gimick, but after many flights with my Night Timber X, I can appreciate it more now when I'm RIGHT at the edge of the runway an not able to swing the tail around.
Agreed, it is nice to have and fun to play with too, haha!
Not a problem for a guy of your caliber !
3 Minutes of excellence😬
🤣
I am a 3D Guy and this plan is different, I would not hover it with out being 2 mistakes high It not good to recover in not sure why
Had 2 one a yard long wing and a 1/3D scale and make sure the airalons are screwed in when flat spinning
😂😂😂 So just remind me, who is the better pilot? Don’t put yourself down by calling yourself mediocre. At least you bought that plane home in one piece.
Haha
@@Thercgeek well 2 pcs
Watch it with closed captions on... when it hears the motor running it thinks it’s applause.... quite apt really 👌😁
Haha, nice!!
Well look at the bright side you got the crash on film. most of us we crash and nobody ever gets to see it. Not bad 137.50 per flight
Haha, indeed! 🤣
If you ain't crashing you ain't flying
Remember 3 MISTAKES HIGH..
AND DONT FORGET TO PACK A
BIN BAG
True story!
Anyone else experience wing chatter on this plane? Under full speed or high wind conditions the wings flap like crazy! Every time it happens I need to let off the throttle and turn safe on to recover. It scares the crap out of me. Wing is mounted tight. I'm unsure what the heck could be causing this, any ideas?
Wow, that’s wild. I’ve never experienced that with this model. I assume you’ve checked, but Are all of the fasteners tight holding the wings in place?
@@Thercgeek Yep! I might have to ask Horizon if they have seen it before. Pretty strange behavior!
ut oh time for some super steve crash proofing
2200mh battery plenty they are pretty tfings made in Canada real scale have a quik roll rate tor racing and snap to but dont recomend many times remember snap it going up first dont do it to many times once bely landed dint locktite gear but found it 2 weeks later haha
At my club... if you don't break the prop its not a crash......did it land in those bushes cuz it looked like minimal damage?
Yeah, impaled itself into the brush. It’s a pretty clean break, so will be doing a repair video when I get to fixing it.
I have a question for you. I trust your judgment and experience. I have an opportunity to buy a Carl Goldlberg 10-300 kit N.I.B for $325. I recently retired so I have the time and the building experience to do this.
VS buying the Eflight Ultimate. I'm old school and have always thought balsa flys better.
I would appreciate your thoughts. Thanks in advance, Kurt
That’s a good find and the price sounds reasonable. Flying this eflite ultimate got me interested in getting a Goldberg ultimate kit, but I never did. Personally I think the bigger balsa airframe will be more rewarding and probably fly better depending on what you’re wanting to do with it (I.e. 3d vs not).
did you latterel balance to ?
No need on this one. Honestly, I rarely lateral balance an airplane.
I was hoping to see rolling harriers. The Eflight video roller was not axial but that just might be the pilot's preference or skill level. There a link to rolling harriers somewhere?
Unfortunately, I’m not sure. Most 3d maneuvers like that are way out of my wheel house. I’m a scale guy through and through. 😉
@@Thercgeek thx for awesome video. It was informative and why I now own one. Can't wait to maiden it today.
Good luck on the maiden, It’s a fun one for sure!
Is it possible to reverse Throttle midflight or do you have to stand still.
Thanks for Answer
You can reverse throttle in flight should you chose to.
Thanks
I noticed on take off that both of you gunned it. Is that to avoid ground loops or pulling to one side on take off?
Yeah, it does keep it from ground looping. Ground handling on the airplane isn’t all that great otherwise.
@@Thercgeek Thanks, just got back from the field and my flying buddy (no not me!) landed in a tree 50 feet up on his maiden take off. We tried for hours with no success to get it down. The tail is stuck on one end and looks like a branch has one wing and maybe a landing gear.
Oh man, that’s a bummer! Hopefully you guys will be able to get it down.
Thanks Chris. I am using a bow and arrow with fishing line from my fishing reel attached to the back of the arrow. We have gotten a line across close branches a few times - pulled up a strong parachute chord and been able to shake the plane pretty good but it hangs on. The tail is really in tight - I ask my buddy if he accidentally flipped the back up switch and jammed the tail tight between the branches after he landed it in the tree lol ! We may have to get ruff with it and damage it just to get the electronics back and rebuild the plane.
It's not a matter of IF your going to crash, it's a matter of WHEN!
It's a fun bipe , I like it for scale aerobatics and as a turn and burn model.
Very nice looking parcflyer with 3d capabilities, your videos are fun! Bravo!
One question: Did you ever try to activate reverse function on edf model by landing as brakes?😄😄😄
Thank you! I have seen some guys use throttle reverse on edfs, but I’ve not tried it myself. It’s not super effect. Certainly not like with a propeller.
Sorry. Looks like a clean break though. Should be able to fix that bad boy.
Yeah, my friend has it just about back together again. Was a clean break in the fuse.
That won't be too hard of a fix thankfully
That is true. I see a repair vid in our future... 😉
Repair video please.
I was going to but then got distracted by other projects and then moving and so ended up giving the airframe away.
Well.... I'm sure it wasn't the first to get broken and positive that it won't be the last! New fuslage or gonna fix the broken one?? AirHammer out!!
My friend is putting it all back together. It was a clean break at the fuse.
I'm pretty sure what really happened was the little guy inside the plane had his head snapped off his spine during the 3D extremes and it was rolling around in the cockpit, then it rolled down and jammed the rudder controls and all the blood also short circuited some of the wiring. Yeah...that's what happened.😉🤕
Makes sense. 🤣
I have a spare "scuffed" Fuse that id give you
I’d take it if you were local! 😉
who needs to back up ?
OH NO 😢😢😢
Ohhhh oof :( sorrry about that it’s part of the hobby but yeah it still sucks it’s split right in half
All part of the game we play.
Better if it wasnt foam and with as3x
Haha, at this size, that’s all you’ll find. Maybe you can score a classic Carl Goldberg ultimate. Those were pretty awesome
Ironic that "Mr. Excellence" is the one who crashed it!😂
Haha, right?! 🤣🤣
OOOPS!! 🤣🤣🤣🤣. SHIP 🛳 HAPPENS TO ALL OF US RC PILOTS!!
It does indeed, haha!
The RC Geek YES SIR!!!
LMAO 🤣 🤣 🤣
😋
trust me neither one of you know how to 3D
Hahaha! I’m well aware of that. 🤣
Dude, unfriend him now!!! Not a pilot, you did a lot better in my opinion
Haha, it happens.
Do you even 3D Bro??? 🤣🤣🤣🤣
Nope! 🤣
The RC Geek I DONT EITHER!! Well, Not on Purpose Anyways!!! 🤣🤣🙃🙃😂