How To Replace Inside Door Handle 07-13 Chevy Silverado
HTML-код
- Опубликовано: 15 окт 2024
- Buy Now!
New Interior Door Handle Repair Kit from 1AAuto.com 1aau.to/ia/1ADH...
1A Auto shows you how to repair, install, fix, change or replace a broken or snapped off interior door handle. This video is applicable to the Chevy Silverado and GMC Sierra, model years 07, 08, 09, 10, 11, 12, and 13.
This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/omx/1AX...
• Phillips Head Screwdriver 1aau.to/omx/1AX...
• 10mm Socket 1aau.to/ojC/1AX...
• Needle nose pliers 1aau.to/obE/1AX...
• Needle nose pliers 1aau.to/obE/1AX...
• Ratchet 1aau.to/ont/1AX...
• Socket Extensions 1aau.to/omo/1AX...
• Drill
Subscribe: / @1aauto
Check out our playlist:
Chevy Silverado 2007-2013 2nd Gen: • Chevy Silverado 2007-2...
Chevy Auto Repair Videos: • Chevy Auto Repair Videos
For More Info visit us at 1aau.to/h/xa/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
I just replaced my outside handle with your part. Do you sell the 10mm bolts for the interior handles ?
+Ariesnc thank you for your questions. We currently do not carry the interior door handle bolts.
I can't open my door and I need to fix it. How do you take it off without opening the door
I have to do this. My handle fell off in my hand 2 years ago. I’ve been rolling down my window to open my door since. It’s such habit, that no matter what car or truck I’m driving, I immediately roll the window down as I’m coming to a stop. My family and friends have looked at me like, “what are you doing?”😂
i feel your pain!
facts!! I do this all the time haha
Lmao i thought mine was bad, it’s been like six months
Ha! My family has been laughing at me for a year now every time I roll down the window to get out. Or, when I take the keys out before rolling down the window! Party is over now-fixed her myself thanks to this video!
Me too right now it’s been like 4 months for me so far 😂
The dealer tried to quote my father 975$ for just the parts. I ordered the kit off 1A auto, which literally came with everything and installed it today. My dad was thinking of trading his truck in before he talked to me, this video and parts kit saved my dad well over a grand, thanks very much guys!
Great vid and kit, I just did this repair, pretty easy. GM should be ashamed of this design in the first place.
Very helpful video. Went 10 months without a handle and now I am thrilled to have fixed it myself
For the past 9 years you have helped people replace their door handle. Thank you 8 months of rolling my window down solved today with your help.
Just did this on my 2013 Silverado 1500. A few tips for whatever it's worth:
-Disconnecting the harnesses beneath the switch panel is a bear. Took me about 15 minutes just to get this part, might be easier with two people and some small flatheads.
-When drilling out the plastic rivets, be careful not to overdrill as you can damage the plastic female end and thread.
-Popping the new handle into place took a lot of force and I never heard an audible pop.
-In the video when he puts the door panel back on he lines up the two bottom hooks first. I'd recommend lining up the top of the panel with the window sill very first since there's a groove it needs to sit in.
Otherwise, very helpful video!
Thank you very much, your video was very helpful and price for parts very affordable. Prior to going online I took my 2011 GMC Sierra to the dealer, they stated that the only way to replace the broken handle was to replace the entire inside door panel it self at a cost of $700.00. The $42.00 and approx 1 hour of labor was well spent, Thanks again 1A Auto.
That's a great testimonial! Really glad to hear we could help you save some serious cash on this repair, Mark! Thanks for checking out our videos! If any of our viewers need to make this repair, we carry the part shown in this video on our website. Here's a link to them. We also offer free shipping on all orders in the US. www.1aauto.com/interior-door-handle/i/1adhi00944?RUclips&CTA%20Comment&ATony
Great detailed explanation. I loved that it was in no way dumbed down, drawn out like some guys do in their videos, and you didn't skip over anything. You just proved that with the right tools and know-how it's just a 10 minute job! I have my kit, it's 5 degrees out, but when it gets back to 30, I'm on it! Thanks!
Just did this tonight! Took about an hour because there was a slight defect in the male end of the handle. I needed to sand it down a little bit so the handle could slide on til it clicked. I tried and tried and couldn’t get it on, then I noticed a metal lip that I sanded down and it went on nicely after that. Also the plastic door panel needs to go on the rubber strip under the window as close as you can get it. That was a bit of a pain. But this video is great and made the job easy! Saved lots of money doing it myself rather than spending a few hundred at the dealership.
+Ryan Foust Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
I fully expected that I’d be going a down rabbit hole trying to figure out how to do this repair. Instead the first video I clicked on showed me exactly how to do this. Thanks so much !
Great video. I just changed the driver’s side handle on my 2011 Silverado LT Z71. There were a few of issues that I encountered not mentioned in the video. 1). There was an extra connection when I took off the instrument panel. It took me a minute to get that taken off door. 2). I had a hard time getting the new handle to snap back on the new component. It didn’t snap back on easily. 3). The door handle cable was a little tricky. It can get a little twisted when you tilt the door. I had to work it a little.
But I never would have tried this without the video and the part from 1AAuto. Great job guys.
+BigMilt8 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Perfect step by step instructions. Just did my buddy's 2013 silverado. Video was on point.
Ok my mechanic quoted me 90 bucks for the part and I didn’t even ask how much for labor, I just knew I had to go home and watch 1A Auto first, checked it out and it’s just over 50 bucks, I’m buying this tomorrow, you guys have always been the only people I watch for repairs keep up all the videos
This is fantastic, I broke the cable clip retainer when removing the door to replace my mirror, so buying a kit to replace that part is super cheap and easy!
Awesome kit. Worked great and video helped a ton. Had a problem getting the cable off and just finally broke a small plastic corner piece on purpose to remove it. Handle works pretty good. Mine will come off though but no big deal. Thanks!
Great video and the part came quickly. I found a bit of a shortcut for removing the cable, which was a little hard to do, even with the good instructions for tipping the door around to get at it. I found that it was hard to squeeze the tabs on the clip at that angle and realized, since I was removing the part, that I could just snap off the plastic corner of the handle body up to the clip/cable and it came right out.
+Bill Isles Thanks for watching, and thanks for the info! 1aauto.com
Need help with the cable….. how do you even remove it?
Got my replacement parts faster than anywhere I've ever ordered! Thanks!
+Joseph Beasley Thank you for your order!
Perfect video. Simple and right to the point without filler content. Thank you
Just installed it, was so easy and simple, excellent customer service too, great job 1AAuto!! Saved me a lot of money doing it myself 👍💯
This video was truly helpful. I completed the task in about 20 minutes. Thank you so much 1A Auto😊😊😊
Just got my handle , looks good , wouldn't be a bad Idea to mention the cable going to the lock mine end was about to come off . Noticed you didn't sell it but found it on amazon 16$ dealer wanted almost 100 looks exactly the same
Installed this today. Not something that someone with no knowledge of cars could do based on video alone. I had a lot of trouble getting the handle cable released, broke several of the door clips, and could not get a good solid screw attachment after boring out old plastic rivets. Also...there was an additional attached plug to the window control panel that I had to figure out. All in all....not an awful experience, but I wish the clips that did get broken had not broken. Time will tell how good of a fix this really was??
Followed video and worked out great did my door handle in less then 45 minutes once I had the kit
Thank you very much
I followed the video and it was 100% on point. Easy install. Now I don't have to roll my window down to get out lol. Installed on a 2011 silverado.
This video helped out alot. Been watching and buying parts from you all for my truck. Thanks.
+Crypto Fish Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Great video! I had an hour before a storm was supposed to come in and finished in 30 minutes! Saved money, time and feel pretty good! Thank you
+John Gertz Thanks for watching. We carry the door handle shown in this video if any of our viewers needs to make this repair. Here's a link to them. www.1aauto.com/1A/DoorHandleInterior/Chevy/Silverado1500/1ADHI00944?RUclips&CTA%20Comment&ATony
Thank you 1A AUTO for the excellent video and replacement parts to repair my truck door handle.
Excellent video guys. I bought the kid from you guys because I appreciate the attention to detail. The only thing I had trouble with was getting the cable with the little ball on the end out. Anyway, my interior door handle works now and I'm very happy. Thanks again for making these videos.
I couldn't tell what he meant about pushing in the "clip" on the cable to release it?
@@galootsgarage4328 did u figure it out cause I’m struggling right now
Thanks so much for this video. My cable had come detached and this video helped me figure out what to do.
Didn’t even directly look up my truck and this video just blessed me
Thanks just did mine tonight. Wouldn’t have done it without this video
Great video. Perfect step by step instructions. Took about an hour to replace my door handle. Thanks!
+James Strickland Thank you!
Thank you for the video it sure helped a whole lot . Now I can replace the handle myself .
Nice video A1.I have the same truck.,changed the cable for inside door handle and found someone else changed this part and stripped out panel for the small screws. If I was to use jb weld like Daniel L. Dill mentioned I wouldn't be able to remove it again. What else would work for me?
This is very helpful for me. I was breaking down that handdle that I needed to change. This video gave me a solution what is best way. I just follow this and I did myself to fix it. Thank you bery much!!!
This video helped me a lot to change my handle thank you for posting it
Thank you so much for all your advice Mike and everyone from 1A auto I've saved thousands over the years by watching your extremely helpful step by step videos👍👍
Great video, the cable inside the door is kind of a pain but other than that straight forward
Just ordered the kit hope it works well thanks for the video
Thanks for the education I just changed mine and it came out perfect I really appreciate your video
+Joe Furlong Thanks for checking us out!
Good video!!! My question is, If just my door handle broke off I don’t need the whole kit do I?
thanks so much 1A auto just ordered it from a thanks amanda for helping me out so i didn't order the wrong one very professional run business i highly recommend them and will will purchase more from them in the future
I'm not sure if you answered this in another comment, can you give more details when drilling out the rivet. Are we to go straight through?
Just completed the install of the new handle kit and it was easy. Thanks for the video and the $ saving part. A1Auto has a new customer for life!
+Bret B Thank you very much! We look forward to doing further business with you in the future.
I ordered their kit----worked perfectly!
Great video !!!!! PERFECT. NO HICCUPS AND WELL EXPLAINED.
Helpful video. The screws provided in the kit, however, were too small. I used some other screws that were slightly larger and longer to secure the handle to the door panel.
What size screws did you use?
Great video, disappointed we did'nt see you fight with that bolt and clip on the handle itself when reinstalling.
Great video. I wish the explanation of removing the cable was a little easier to see. I struggled there. Thank you
Replacement handle isn't sliding in to click do I need to file it down?
Thank you!! Saw many videos but none explained as well as yours did.
+Mercedes Trevino Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Excellent instruction video 1A Auto. Your part and video made this an easy replacement job saving me lots of money. Thank you for taking the time to promote your product and installation.
You guys have been lifesavers with your instructinal videos. Ive bought parts from you guys as well. Good parts
As indicated by some folks ... had to use the old handle. New one would not "clip" in place. Don't know why more folks don't have this problem with the inside handle. I took the suggestion of a customer that used the old handle and worked just fine. In addition the new handle assembly would not lay flat into place. Hoping the screws and super glue will hold and the repair will last.
Thank you your video got me together. Happy New year
Does 1A Auto carry those pull handles (the first thing he removed from the door) I cant seem to find them anywhere for an 08 gmc sierra. Only for a 2010 - 13.
you guys make it easy ..thx so much ...im gonna order the kit because of it!
+mwestervelt Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
Thank you so much. Couldn't have done it without ya. 😊
+@laurawofford-brown4351 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Great video! Definitely helped me replace the door handle
Ripped that bad boi clean off yesterday just getting out of the truck. Now I get to roll the window down 😊
How do you know if its the handle assembly as shown in this video or the cable?
This was awesome. Helped me out today.
Do you have a video for a 2012 GMC Sierra replacing the front inside door arm rest? I might be saying the part wrong. But it's for the long piece of the door handle, which is next to the window buttons. The long plastic handle piece broke. Please advise?
When you use the needle nose pliers to press the clip??? What clip do you press on
How can I order or name of the little panel on the door handle for my 07 Silverado thanks
Pro tip: put a rag in the recess before removing those two bolts where the handle is and especially when putting it back together. Otherwise they’ll fall in the door and you’ll have to take it apart again.
Thank you! This worked well. Great instructions!
I have been doing the same thing rolling down the window and reaching out and opening the door from the out side but getting ready to buy a kit so I don't have to any more
Epic thank you for the video. Easy fix for just about anyone!
Great video and step by step instructions. Your replacement part fit perfectly, thanks for the help!
thank you for the videos, i just placed the order.
I had to replace mirror right after I changed inside door cable, noticed someone else had changed this part and stripped out the little screws. This will the third time taking the door panel off.
Thank you for your service 👍
First thing the installation video is great, its a great help for me to fix this issue, just one question arose while watching this, what exactly happens to the clip you pry out in 4:16? Do you reuse it when installing the new part or discard it?
Thanks for watching. You would reuse the clip once its all back together.
1aauto.com 888-844-3393
Ok thank you, I'm needing to do this and I wasn't sure what to do with the clip. Thank you.
does chevy offer a arm rest replacement for the 2012 silverado?
If you have to second time, good luck, I end up drilling through the door panel and using a small bolt and self locking nut to secure the new handle.
Perfect - just what I needed!
Finally had the time to install the part today. Thanks for the great video as well as the product. Hopefully I didn't go to deep drilling the old part...but it's fixed hopefully the superglue will hold....
+larry k webb Thanks for watching. If any of our viewers needs to make this repair we carry the replacement part shown in this video on our website. Here is a link to them www.1aauto.com/1A/DoorHandleInterior/Chevy/Silverado1500/1ADHI00944?RUclips&CTA+Comment&RPI_5uL7Hw
Product worked great!! Instructional video was a great guide. Thanks
+Everything is Reactionary Now 7/12/2017 Thank you for your order. If you would like to leave us a review on Google it would be greatly appreciated. Here is a link to our reviews section. Have a great day! goo.gl/i5JFNY
What clip are you using the needle nose pliers on? The video doesn't show it?
The handle you first removed with the silver on it what is that called mine broke and I’ve been looking for a replacement but I don’t know the name when I look up interior handle it’s not what I’m looking for
Question, does the super glue that comes with it work or should I purchase a better brand like gorilla glue
+@jssweet64 The glue included with this set will work as intended, you do not need to purchase different glue.
At 4.47 in the video what is preventing me from being able to replace my interior door handle that was with the retaining clip instead of replacing the entire assembly? Any reason why that wouldn’t work so that I don’t have to drill plastic
Thank buddy. Got it done.
@4.16 you remove a clip and washer but don’t show putting back on. Do I need to do this?
While taking the cable off the door panel, the twisted wire with the ball at the end, has slipped out of the clip. Nothing looks broken, I can feed it back in, but it won’t bite and stay in place. What can I do to get it to stay in there? If I reattach everything back together it will pull out the first time I pull the new handle.
The door handle can be released with a small straight blade screwdriver prying under the head of the pin without removing the clip under the pin or the eclip at the handle crank. My door handle failed for multiple reasons, the eclip left to parts unknown, 4 of the plastic rivets failed taking part of the plastic with it and the pocket that the cable ball end goes in broke half away. I need the kit for the handle crank with a good pocket, the plastic bracket and will likely end up drilling through to the interior side and installing screws all the way through due to the original rivets breaking away and not leaving enough material to attach using self-tapping screws. I will probably apply some plastic cement between the plastic bracket and the inside of the panel. And now, a word on GM products; this will be my fourth trip in this door, twice for the latch which needs to be replaced again, once for the speaker of which all four have failed and now this handle repair that I'm going to say is woefully inadequate. Add in the failed brake switch, the EVAP solenoid, brakes twice, seems to burnout the drivers head light bulb frequently, terrible transmission shift map, 2008 Sierra 76,000 miles, not a good track record. oh, and the LH front switch pod has a defective switch for the RH rear door. I have a 1996 Tacoma with power windows and door locks that still work, I stopped driving it when the weather is hot last year because the AC quit. I'm really beginning to hate this GMC. The good side of this truck; on the open road supper comfortable, quiet, bright headlights (when they work), the stabilatrac saved my axx when a dear jumped in front of me.
I have replaced all my latch and handles and cables and after all replaced started having problem with interior and exterior door handle isn’t opening driver side front door. It won’t open and I’m guessing there is something catching and not allowing it to open. It did open once after much finessing and I got it all working and closed it and it worked for a day and got stuck again fml
My brother got a kit like this and it didn't come with screws. Can you tell me what size they are?
Thanks for the video and information. Very well presented.
+Rob Stone Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Love these guys
My passenger side door won’t open from inside or outside. I have managed to get the panel off while door was stuck shut. I analyzed everything and nothing appears to be broken. I put the door back together and it worked BUT later that day it stopped functioning again. Also it appears that the lock actuator is working as well. Any suggestions? Thanks!
+Eric Burke We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
You guys rock! Thanks
When you removed the bolts at 1:35 do they have nuts or do they bolt into the door panel? What exact type of nut and bolt do i need to replace that pull bar
Like a charm! Thanks!
thanks for the vid it just help me out alot
Thank you so much!! Worked perfectly!!
+Ryan Allen Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
Does anyone know if these cables are the same for both front and rear doors?
Excellent video...