Just replaced the APIM 3 in 2018 Ford Fusion following your I struxtions and they were perfect! Thank you very much. The hardest part is getting the black fsce cover shroud off the 3 brackets at the top near the hazard light button and dual vents. That took awhile to get it out without breaking the cheap plastic. Thanks again great video.
Do you have a recommendation on where to buy the APIM module? The dealer wants to sell it for 799 plus installl and advised me that there are no aftermarket parts for it
I have a 2015 for fusion with a 4 inch touch screen. I’d like to update to a bigger screen but what else sill I need to replace? Will my rear camera still work or will I have to get another one?
I have a 2016 Ford Fusion and the screen is cracked. The dealership wants to charge me 1,100$ for a new one. They said the majority of the cost will be a mounting a kit. So I’m not able to just buy a new screen? I have to get the mounting kit as well?
Hi! Thank you for your video, I was able to take off the screen. I have a 2018 & my screen started turning off and on until it stayed off. How could I find out there is an off/dead wire? I’d appreciate the help pleaseeeee
I have a 2016 ford fusion that none of the buttons work on my touchscreen and radio doesn't work. I have heard that ypu can unplug the touchscreen and that should fix it. If not does the dealership reprogram the touchscreen if I get the same model touchscreen for free or do they charge?
I have a 2017 ford fusion I'm looking to upgrade my touchscreen radio to get more volume control and better equalizer what kind of radio will work? Do you know how many amp does the fusion have?
When I bought my 2013 Fusion the radio worked, but not the CD player. Then, on the way to the used car dealership (it was still under warranty) the CD player started working. I never used the radio after that until recently, but now the radio only produces static, like the antenna is not attached. I am not crazy about disassembling the " console " if it needs a part until I am sure what it needs. What might be the problem
You can check to see if the antenna plug into the audio control module which is the cd player. Or the cd player took a crap again or you have somthing interfering with the radio
32 inch touch screen? Like the tesla? Its possible but dont know what's all involved. I've heard people upgrade from the 4 inch to the 8 inch in that cause you need new wiring adapter the sync module apim a gps and usb port
Yes you do need a new connector that have the additional wires for it. I believe they make a kit to upgrade from 4 inch to 8 inch but I think that over 3k dollars
I have a 16 ford fusion my apim is fried. Cant connect SD/Bluetooth, radio only. They were gonna charge me $800 to replace it! I can do this myself. If you need to reprogram it, do you need to bring it to the dealership with the radio in the car? Or can i bring the apim down by itself to reprogram the vin #? Thanks in advance.
I have a 2014 Ford Fusion...the radio won’t change stations and there’s no sound anymore for radio, cd and media...first started with loud static and no sound...fine for a month...then more static and not sound at all... how much is the radio?
I paid $200 for mine and installed myself I was also having radio issues but once I fixed the screen , I was able to adjust the balance of the speakers so sound could come out of all 4
Nick the car guy a double din pioneer or kentwood radio should fit in the open space where the ford 8’ screen would be. i want want the face plate to keep a/c controls and add my own stereo into the opening
I'm not for sure on how that would work you would have to go to a radio shop and ask them about it. I've seen it done on a mustang with 8 inch but I don't know what's all involved
I recently picked up a sync 2 8” radio from a junkyard with the bezel… I noticed it needs a extra harness that would plug into the back of the screen… do you know it that harness is something I could purchase without buying the whole kit? Very expensive for the kit it’s ridiculous
You will need a new screen the sync 3 screen is different from the sync 3 screen. I would find a vehicle just like your with the sync 3 system and copy its asbuilt data onto your new sync 3 system
@@Nickthecarguy hi there, i dont want to upgrade to sync 3, i just want to replace my cracked blacked out screen on my sync 2 screen 8inch I got the same screen from a total loss car
@@RC-rg3vz oh if your replacing just the screen you don't need to do programming you just have to remove the trim panel and the climate control panel then there 4 bolts that hold the radio screen and module then once you remove the 4 screw you can remove that whole assembly then on the back there should be 3 or 4 Phillips head screw that you remove to get the apim module off from the screen then your transfer the apim onto the new screen bolt it on then ready to go
Okay I got the screen out of a different car but it’s the same year and model… my car doesn’t have park assist but ig the other car did now there is a park assist fault on the screen and won’t leave
Just replaced the APIM 3 in 2018 Ford Fusion following your I struxtions and they were perfect! Thank you very much. The hardest part is getting the black fsce cover shroud off the 3 brackets at the top near the hazard light button and dual vents. That took awhile to get it out without breaking the cheap plastic. Thanks again great video.
I was able to replace my broken start button because of your videos. Thanks!
Thanks for the video, was able to remove all the trim so I could mount my CB
YOU ARE A LIFE SAVER THANK YOU SO MUCH YOU SAVED ME $300 !!!
I have a 2013 ford fusion & want to upgrade too sync 3.. & was planning on going to junk yard.. what kind of part number am I looking for??
Do you have a recommendation on where to buy the APIM module? The dealer wants to sell it for 799 plus installl and advised me that there are no aftermarket parts for it
I would do ebay or your local junkyard
Where did you get the upgrade?
Thanks for the walkthrough, really helped!
I have a 2015 for fusion with a 4 inch touch screen. I’d like to update to a bigger screen but what else sill I need to replace? Will my rear camera still work or will I have to get another one?
I have a 2016 Ford Fusion and the screen is cracked. The dealership wants to charge me 1,100$ for a new one. They said the majority of the cost will be a mounting a kit. So I’m not able to just buy a new screen? I have to get the mounting kit as well?
Hi! Thank you for your video, I was able to take off the screen. I have a 2018 & my screen started turning off and on until it stayed off. How could I find out there is an off/dead wire? I’d appreciate the help pleaseeeee
It sound like a bad apim module that is located behind the screen
I have the same problem. How did you fix yours?
I have a 2016 ford fusion that none of the buttons work on my touchscreen and radio doesn't work. I have heard that ypu can unplug the touchscreen and that should fix it. If not does the dealership reprogram the touchscreen if I get the same model touchscreen for free or do they charge?
I have a 2017 ford fusion I'm looking to upgrade my touchscreen radio to get more volume control and better equalizer what kind of radio will work? Do you know how many amp does the fusion have?
Hey I have a 2015 Ford Fusion and the touchscreen works fine but no sound comes out of radio and the stations won’t change. What do I need to do?
Does anyone know how many watts this puts out? I'm currently looking to upgrade the speakers but not sure if I want to get a new head unit as well.
hi I have the same console but how do you remove the vents also?
hi, I hav ea 2013 fusion it is made up differently, is this video still a good guide. I cracked my screen and I am trying to replace.
How did you end up fixing it?
Please clarify again how this process is different for the 2016 Fird Fusion SE. Thank you!
When I bought my 2013 Fusion the radio worked, but not the CD player. Then, on the way to the used car dealership (it was still under warranty) the CD player started working. I never used the radio after that until recently, but now the radio only produces static, like the antenna is not attached. I am not crazy about disassembling the " console " if it needs a part until I am sure what it needs. What might be the problem
You can check to see if the antenna plug into the audio control module which is the cd player. Or the cd player took a crap again or you have somthing interfering with the radio
Can I go from a 4 inch to a 32 inch touch screen? I'm getting a 2016 Fusion
32 inch touch screen? Like the tesla? Its possible but dont know what's all involved. I've heard people upgrade from the 4 inch to the 8 inch in that cause you need new wiring adapter the sync module apim a gps and usb port
Do you know where I could get the face plate for the radio the buttons part?
Jeana Fuentes have you tried eBay or a local junk yard if you're looking for the faceplate like mine it's on a 13 through 17 fusions
Thanks great job
I have a 2013 Ford Fusion and I want to swap the 4’ screen to a 8’ screen display and control panel. Will I need additional wires
Yes you do need a new connector that have the additional wires for it. I believe they make a kit to upgrade from 4 inch to 8 inch but I think that over 3k dollars
That’s man said cardboard 😂😂😂
How did you reprogram the apim after putting the new one on?
Did you figure it out? I have the same question
@@JP-wm7ot unfortunately i havent you will prolly need to take it to a dealership or an autoshop that has the equipment to reprogram it
I have a 16 ford fusion my apim is fried. Cant connect SD/Bluetooth, radio only. They were gonna charge me $800 to replace it! I can do this myself.
If you need to reprogram it, do you need to bring it to the dealership with the radio in the car? Or can i bring the apim down by itself to reprogram the vin #? Thanks in advance.
I can reprogram it if you need or dealer can reprogram for you
Does dealership reprogram for free or do they charge?
Just bought a 2016 fusion the screen is cracked we’re can I buy an inexpensive replacement
I get mine on ebay
I have a 2014 Ford Fusion...the radio won’t change stations and there’s no sound anymore for radio, cd and media...first started with loud static and no sound...fine for a month...then more static and not sound at all... how much is the radio?
It all depends on where you get it i get mine on ebay I would pull your old one out and mach the part number with the new one
I paid $200 for mine and installed myself I was also having radio issues but once I fixed the screen , I was able to adjust the balance of the speakers so sound could come out of all 4
On ebay
can this ford face plate be used to add an aftermarket radio if you have the 4 inch screen ? since it will have a big opening
What kind of aftermarket radio you trying to add? Not forsure how that works. I've only added from 4 inch to the 8inch sync 2 or sync 3 system.
Nick the car guy a double din pioneer or kentwood radio should fit in the open space where the ford 8’ screen would be. i want want the face plate to keep a/c controls and add my own stereo into the opening
I'm not for sure on how that would work you would have to go to a radio shop and ask them about it. I've seen it done on a mustang with 8 inch but I don't know what's all involved
@@keishauncampbell2697I’m in the process of doing this. Did it work for you?
I recently picked up a sync 2 8” radio from a junkyard with the bezel… I noticed it needs a extra harness that would plug into the back of the screen… do you know it that harness is something I could purchase without buying the whole kit? Very expensive for the kit it’s ridiculous
Did your car have the 8 inch screen or the 4 inch ?
I’m also looking into doing this in my car I have the 4 in
Has the 4” screen. Didn’t notice your response or I would of replied sooner
Average Price on reprogramming ? I have an 8inch screen my sync 2, already have the part just need reprogramming
You will need a new screen the sync 3 screen is different from the sync 3 screen. I would find a vehicle just like your with the sync 3 system and copy its asbuilt data onto your new sync 3 system
@@Nickthecarguy hi there, i dont want to upgrade to sync 3, i just want to replace my cracked blacked out screen on my sync 2 screen 8inch
I got the same screen from a total loss car
@@RC-rg3vz oh if your replacing just the screen you don't need to do programming you just have to remove the trim panel and the climate control panel then there 4 bolts that hold the radio screen and module then once you remove the 4 screw you can remove that whole assembly then on the back there should be 3 or 4 Phillips head screw that you remove to get the apim module off from the screen then your transfer the apim onto the new screen bolt it on then ready to go
@@Nickthecarguy awesome!! Thanks for this information!!! Liked and subscribed
@@RC-rg3vz i appreciate the support
I'm trying to add a rca converter to mine do you know the wire colors for the rear speakers?
Paul Davis are you talking about the rear door speaker or the subwoofer?
Paul Davis for the rear subwoofer white wire is for the positive and blue and green for the negative this is for the left subwoofer
Nick the car guy do you know how to add the factory navigation system into the stock unit?
Joe Gotti for sync 3 you have to replace the apim. I upgraded mine to nav on it sync 2 there way to do it without replacing anything
@@Nickthecarguy dude how did yu do dat? I want navigation on mine.
Thanks I figured it out lol
Okay I got the screen out of a different car but it’s the same year and model… my car doesn’t have park assist but ig the other car did now there is a park assist fault on the screen and won’t leave
You will need to reprogram the module as built data
@@Nickthecarguy how do I do that?
@@Nickthecarguy how long does it take? Currently sitting in the car now
@@Nickthecarguy the message won’t move to even let me touch anything on it to even reach the settings of it
@@Nickthecarguy the message won’t move to even let me touch anything on it to even reach the settings of it
My screen just black I can still listen to music thou
How much does it cost to replace the screen?
Do you have sync 2 or 3
Why so dusty