Galaxy Tab 3 SM-T210 Charging Port Replacement
HTML-код
- Опубликовано: 10 сен 2024
- In this video we cover the Galaxy Tab 3 SM-T210 Charging Port Replacement.
Check out our latest video, the Galaxy S6 edge screen replacement!: • Galaxy S6 Edge screen ...
Feel free to visit www.254repair.com for more information.
hi, everyone who watches this video needs to understand that although it looks like you know what you are doing, there are many things wrong with this repair video.
therefore i strongly suggest cross referencing other soldering repair videos to get a good idea of the process before undertaking a repair like this.
Rastablastaz q
Great!! Didn't work 1st time so tried again with the usb plugged in before I re-attached the battery like suggested, then hey presto!!! It works!
Many thanks for this super video.
you put too much presure with the tweezers on the port when you were removing it, you could ve damaged the solder pads. or maybe you did damage one ? check the third solder pad (of the data transfer connection) from the right ... 5:37
Mohamed Yazid Chala Correct, it appears when he ripped off that port...he also pulled off the pad.
+254Repair Killeen I use a larger nozzle in the hot air gun take the old port port and drop the new charging port at the same time while you pointing the hot air, all what you need is a tweezers, no need for soldering tip just a bit of flux and its done, takes 3 min, try it you will see.
I copied the way you took connector of then replaced connector, worked first time tyvm
Good video, thank you. My first USB replacement on the SM-T210
good video but dont use metal to open the back cover as it may damage the tablet by producing static electricity or may break the inner parts
Why can't we just disconnect the battery and reconnect first, let's see if that works.
Could you recommend where I can purchase that small electrical component?
Very nice video with I had all the tools you have! Would be easier lol Thanks!
Awesome work man thanks for the video
Where did you get solder suction equipment any link will be appreciated thank you very useful video
As per earlier post (but couldn't see a response) that white peg grid is very useful but can't locate on the net - any pointers?
This video help me fix my tablet. Than you
you tore a whole pad off , well done lol
Hi. Can you tell me where you got the film or tape that you wrapped around the PCB before desoldering the port? Also, where did you get the round white grid from that you "pinned" the circuit board to? That is quite interesting. Thank you for your help!
Yikes. 4:44 when you ripped the port off the board: that was painful to watch. I wouldn't recommend you advertise your process until you're actually doing a good job. People don't need to learn it the wrong way.
How much would this cost? I need mine to be replaced since both the charger and the charging port broke. But I won't be using Best Buy and my 1 year warrenty ended a long time ago.
Is it possible to replace the whole board with the charging port? or does the board contain the memory too?
You damage one of the pins on the moder board how did you fix that. thanks
I have this tab sm-t330 and it requieres the same process for repair, also I have a galaxy tab pro 8.4 sm-t320 same problem,. I'll recommend forgetting about sm-t330 and getting a tab pro sm-t320, I have done the repalcement of the charging port, you just disconnect the charging port and reconnect the new one, nothing else. besides tab pro sm-t320 has twice the processing power and way better quality for videos and photos than sm-t330 and is a little bit bigger. so i don't think i'ts worth fixing the sm-t330,
I'd just install the charging port on my tab3 without breaking any pads... tools you needs( heat gun set to 310 degree, Flux , soldering gun magnifier glass and lots of patients and praying too.. that helps.. and it works..
GOD cares not for electronic devices.. Moron.
Bad job, pad get lifted, too small hot air head, looks like too low temperature was used from preaheater if any and players instead of twezer are terrible ,it take out all heat of connector , this was bad idea.
Where did you get that mini peg board PCB holder please?
thnx for the helpful videos
Whats the name of the acohol u used and yhe solder
Hi...what do they call them power chips, so when I go to buy that part to replace the old one, I will now what to call it. Oh and is it possible for u to make a video showing all of the tools that you use to get the job done and a link in the description below on where to get them?...thanks.. I like ur video's.. I subscribed u.
oh...charging ports, that what I meant, I just did know what to call it lol but thanks so much....thanks sire and for the upcoming link
how hot is the soldering gun have to be at
Is that a paper clip your using to Re attach the port charger ?
haha wow... a paper clip?? really?? johnathan you might not want to try this.
thank you
Very informing. Do you know where can I purchase the soldering iron?
amazon
Emrette Sparda Publix
What things do you need to put back the charger and port together? *****
***** Like what tools and such. Like the thing you used to heat the thing you were fixing so it wouldn't damage anything..
whats the name of the tape you used to prevent the other components from overheating
+DJ MUTTY kapton tape. ebay has it
Thanks
how long does this take. and the price ?
where i in can buy the whole part??
thanks
what flux do you use?
Thank you but it's a too long time method ! It's better to put under the keyboard the hot air and you put off the usb connector easier !
Could you guys do a video on how to replace the charging port on a samsung galaxy Tab s 10.5
you guys thnx for the helpful videos
What is the name of the machine you are using?
I meant to say what model...
Thx
Iaastaz God bless you all have Ahtzer Aiciat Guetat one her legs do not rush
I do not have that steady hand I would destroy the PCB for real.
Any chance I can just replace the whole PCB with the port already attached?
Off to eBay I go.
I know if I do it myself I'd save a wack-of-cash
Just don't have that steady hand, I am old you see... LOL
***** can you repair my Samsung galaxy tab 3
looks not good to me!
Canibal, com a força que fez levou trilha de dados junto. 👎
I wo
Pig work... dislike