How to replace the fixed charging port
HTML-код
- Опубликовано: 11 сен 2024
- Find cell phone replacement parts at: www.etradesuppl...
Use our coupon code: ETS8NTT3 for small discount. It can be only used on orders over $50 until Feb.10th, 2015
Question? See our Facebook!
www.etradesuppl....
Facebook link: / etradesupply
You are a true master. You did it in 2 min , i did it in 2 hours. Thank you for you're tutorial. 👍
Thank you for your comment, we are glad to hear that it can help you.
@@etradesupply How many degrees did you use?
this is absolutely what NOT to do for socket replacements, it sure does look fast but it could easily damage the surrounding component without heat resistent tape.
ruclips.net/video/xyeLsiVzQW8/видео.html
U will get proper knowledge
You can use Foil paper too
Did 3 in a row all successful. First time too. Thanks mate!!
I’ve ever tried soldering but ended up messing things up but this is cool with all appropriate tools. Chargie USB stick solves charging issues and prolongs battery life by capping charging at any desired %.
Worked like a charm. Thank you so much. Just remember to hold heat gun only on the usb, and you will have no problem. S2 epic working 100 percent.
No audio provided! Good video.
WARNING if you put a port on like this from the top with just hot air you will melt the inside of the port 99% of the time. Best to wick all old solder off and use a ion to install the new one
If you use the right temperature it should not.
In my case one of the pins inside the port broke, not the solder, so i didn't replace the solder.
This port sits firmly in 4 holes, so usb pins aren't put on stress like in different devices.
Also you need to be very careful if you got small components nearby, as they may move as you heat thing up :)
yeah. and shield the other components with tape or alluminun foil, on the board. you can blow that little resistors.
i do it the same way you described
Emmet Myers so whats up? Did the guy in the video did it wrong?
Rolly Yi yep, you can see the port melting and he wipes off the melted part with his tresers
Using an heatgun is just to OP you may remove some really small parts like resistors and capacitors, get a good soldering iron with a proper tip add some flux on an small length of soldering wick, place it on the pad and gently heat it, it's will suck the solder.
i've ben looking / reading everywhere to find this, thank you! now I know, how the pins are connected to the board. cause the ones on my tablet had come off.
Very professional as always!
At what temperature was the reworkstation set to for removal?
is there any tool as an alternative for the heat gun because I don't have it?
can you use any port to replace it with, i need to do this but dont wanna buy parts (too impatient) can i use the one out of my ace and replace the one in my s4 with it?
You didn't clean the old solder pads and no flux wtferrkk?
Brent Simpson ....
yeahhh bad work
Because it is verry hard to do soldering in very small parts. And this is the easiest way......
What are you supposed to do when you to reattach a new charger port what kind of tools?
Dude, that was just a simple re-flow job. You need to show them how to clean up the old solder and apply new solder. This is kind of a half-ass method; I will admit that it will usually work as a temporary fix, but eventually you will need to apply new solder.
Todd Richmond I think it's best for the novice. I followed another tutorial that did as you suggest, and I ended up messing up the tracks when I couldn't really resolder each of the five pins. it charges, but no data. I got the nexus 7 brand new, used it every day all day for a year and a half, charge port problems arose. A 'reflow' would have given me probably another year then I'm done with that tablet anyway.
Also, I think what had gone wrong with my original port was that the pins lost contact with the tracks. So I probably could have used the same port (though it was really loose and a new one would have been nice), remove it and bent the pins downward some, then reflowed it back.
I watched this before, but it came up while I was looking up a charge port repair so I watched it again.
I like how the plastic comes bubbling out the back of the port @ 1:34 that he just scrapes away with the tweezers. To much heat. I would have just removed the old solder and put it back on the the trusty iron. They sit better and stay on longer that way and you don't risk melting the inside of the port or overheating the board.
why no flux? would not applying flux before soldering the chip back on create oxidation to the charging port and create a weaker bond?
nice one
Thanks!
Is there supposed to be no audio for this video? There is only the entry audio with the eTrade Supply logo..
Can I just use my soldering iron to melt the metal off and replace wit with more solder??
You will probably rip the pads up doing that so do not recommend it.
is the same process to replace on galaxy s3?
thanks in advance
You seem like the man to ask, I have a hudl 2 that won't turn on, it's had a new battery but all I get is a red battery when I try to turn it on and then it goes off, please help
I can't plug in my turtle beach in my USB port it broke wat do I do
Hi is there a video to demonstrate how to get to the battery port? Thanks
Sorry, what's the name of the tools you using , please
He has technique which keeps the hot air gun from destroying the replacement port which has plastic parts that easily melt I wouldn't recommend trying this yourself
hi,can this method works for all micro usb ports?
If you do like this internal plastic parts in Charger port will be damaged
What is the thing in the begging he uses to pop the port off
you sure this can work?not clean old solder and no flux applied. also not protect surrounding components
Gosh, the heat gun melted my motherboard!
Don't use God name in vain like gosh search the root word of gosh
@@nonstop6823pull your panties up grandma😂
plz make a video of micromax canvas knight 2 and changing the charging port
what phone model is this?
Where can I buy a port for the 8.4 pro, please.
The same part you are replacing in the video, but for the 8.4 pro.
***** you get it from ebay 2 oieces for 2 pounds
Any specific reason for not using soldering iron ?????
i think this is only a test board as you see there is no covering shields on IC's
Soldering iran bahat hit ho rha hai kya kare upaye bataiye
Vai allah apnake aro boro koruk
Hi, what temperature I need to soldering 👨🏭 thank you very much.
Holy shit thank you thank you. Lol 😂 I didn't want to get rid of it. ❤️❤️❤️❤️❤️
Won’t the heat damage the surrounding components as a learner?
No....
Njia nzuri sana u did well
and what happened with the Flux, you do not use?
sir please Help charging jake to lag jata he .. but battery connector pe voltage kam ate he .. kaha re jamper lagaye
Wow I really like it
My Gionee E3 charger pin port was damaged suggest for solution.
Very nice bhaiyaa
What temp are you using for the heat gun?
2,000,000,000,000 °F
Hot
Looks like it's at max 500C from the video, I would normally go about 330C and lots of flux
where can i buy the samsung s3 charging pot on line.
Be wonderful if you'll talk
I agree 💯 percent with you on that comment,damn!!!!! Will this work on my Tracphone flip phone? I hope so!!!!!
Must u use hot air gun
Can I change micro to Type C?
Yo I tried to Gorilla glue it on will it still work like that!? should of watched a video on how to do this before i tried the glue.. smh.. /:
How many degrees heat you use?
I Did It In My Own Way. In my case connector and PCB was completely damaged. You can check my video.
No need for a hot wind welding only
good
Bro please what is the name of that object that u you to grab the charging port
Twizzer
Can you use a different phones usb
Can you please help me my phone have a problem
In that case the temperature desoldering?
Is this the vizio tablet
What is the name of the tool you use and to heat up the charging port with
Kenneth Lenair heat gun ,you can get it in many places such as amazon or walmart
Kenneth Lenair heat gun desoldering
Why not soldering iron?
what temperature and did you use any flux ?
thanks
no commentary, (English or otherwise) explaining the steps, what tools needed or precautions one should take. -1 for really no help.
Good... Simple technique 🤔
thank you
temperature used?
Heat and air set??
Bhai ye jo heat dene wali machine hai isko kya bolte hai
Nice video
my Lenovo 9920 mobile charger connector motherboard tracks Renu breaking how to connect charger cannecter
agar cc ke track kharab huva ho to kaise solve kare uspe ek video banao sir
Samsung b110 modules mobile h multimitor se chek karne par ek tarf se reding 40 aa raha h aur ek tarf SE bip ki awaj aa rahi h iska upye batiye
ketna price ma change hota ha ya c type charging jack
हेलो भाई कैसे हो
so you didn't add solder?
We don't have to because there is enough solder on the mainboard, we use hot airgun to melt it and fix the new charging port after it is frozen.
Socket ka price kitna hei ???
Hey i went to repair shop to change my charging pin but after they change it works but slow on charging.. I try different cable but still slow charging. Whats the problem on this.?
It fast charging before i broke my charging pin.
Slow charging after they change. 😔
Hi! We don't know your phone brand. Take Android for example, we suggest you check the running software on your phone because too many of this software would prevent your phone moving. Check the charging USB cable as well. Last, go back to the repair shop to consult. Hope this would be helpful for you.
@@etradesupply My phone is Samsung J5 2016
There is no problem on my phone phone before. It was fast charging. Until i broke one of the gold coil in the charging port thats why i need to go to the repair shop to change it. I was there watching while they repairing it after that i test and yes its charging but it was too slow to charge and instead the battery increase it decrease..
Hmm is there any power lose if they not solders it very well?
I think there is some power lose. 🤔
There is no way the power could lose if not solder well. Maybe it's the new replaced charging port's problem, I guess. or it could be the situation that your battery is replaced. Anyway, we hope everything goes well for you.
How much would this cost to be done at a computer shop?
Do you want the cost from every shop? Or do you maybe just want to call your local repair shop and ask them yourself?
Does memory of phone and data delete in changing slot ??
Of course not.
Hm po kaya pagawa ?
I’d never be so happy to have privacy back in my life no friends needed if I can make a call and it’s private it’s worth a trillion dollars
Can a blow dryer have enough heat to melt the charging port off? if not where can i buy one.
A hair dryer? Seriously? The simple fact that you asked that question means that you have NO BUSINESS trying to fix anything yourself. And I mean anything.
Pfft...hair dryer... ::facepalm::
***** im not sure why your parents were so mean to you as a child but leave the guy alone as he is just asking a question and trying to learn.
I feel sorry for you.
+FranchiseSIX5 👏
8 years old video 2021
is the charging port bidirectional in terms of power flow??
so its not possible to tap power from the micro usb charging port??
Vishnu Hari Wow. I can't believe there are people like this walking around the world.
Ive never done this. can anyone give me a detail pointer on what to look out for when I do it. Never used heat gun before... and I have few questions:
1) whats the temparature
2)ppl mention this thing called "Flux"... whats that and whats it for?
Google it. You are online anyways. Oh, and one other tip... don't breed.
thank you. :) I already googled for flux.
you have been of service to humanity. Your anger and hate is really appreciated. Hope you enjoy your bitter life :*
+Lucano Deskovic ';√{}) "likes your comment" 🍻
how to fix the battery port
Nice sar ...
what is this that you remove a charging connector
you mean the tweezers?www.etradesupply.com/curved-hook-tweezers-model-esd-15.html
if it's already broke what's the harm
Yeah the ipod has samsung chips in it
I'm not sure what you mean is right
Anyone know what that thing is that he takes the charging port off with
It is a heat gun.
Why don't anyone put a little fan in tge the back
What is the name of this glue ?... can you please tell ??..
What glue? We don't use any glue in the process.
@@etradesupply Ohh Sorry, This Machine ?...
@@fathimahaseena8131 It's just a hot air gun, dear.
@@etradesupply Ha Thank You So Much... 😊
@@fathimahaseena8131 You are welcome. Please go to our web if you are interested in mobile phone repair.
Can I use fire from a stove? or a lighter?
Both will destroy the pcb.
94rainbowx33 thanks man
do not ever attempt to do anything that they don't recommend on the video. If you can't do this, you're better of following instructions from a different video
Maybe some leftover nuclear bombs too? I mean, we really don't know how dumb you are when you ask if a stove or lighter will work. so we better cover all bases.
DO NOT USE A NUCLEAR BOMB!!
Would This Work for a Moto G