How to replace the micro USB port on smartphones and tablets
HTML-код
- Опубликовано: 19 фев 2021
- Hello, this guide shows you how to replace the bad micro USB connectors on smartphones and tablets.
I use a SMD rework station (hot air soldering) to remove it and solder a new one on.
SMD rework station: • Yaogong SMD Rework Sta...
Desoldering pump: www.ebay.com/itm/154297651701
If you have any questions just ask me :)
Thanks for watching, don't forget to Like and Subscribe
Soldering is so much fun! I’ve been practicing and trying to get better. Thanks for the video!
Appreciated! You make it seem like it is something I can do without a lot of experience.
Excellent video. Thanks so much for taking the time to make this!
The close proximity of those tiny smd components to the socket kept me on edge...
Good job :)
Great tutorial, thank you!
Well done.
Thanks for the information
Have an interview tomorrow mng on this. Thanks for helping out
Brilliantly done
You did a nice job here
Hi, where did you get the needle syringe thing from for dispensing flux?
Man those conical tips are the worst. It's probably late to recommend the TS100 soldering iron but the tips for it are very good especially the conic-flat ones. Too bad the price of it went up and now they replaced the aluminum body with plastic, but if you can get your hand on it for a low price it's a must buy. ;)
Really good video and step by step breakdown, thanks for that. What is the purpose of pre-heating the board?
I think it's avoiding fractures...
Microfractures are deadly for boards
Efharisto Nik thank you very much my friend.
I couldn't really tell what happened when the low melt solder passed over the pads Is it ok to let the low melt solder get on the pads during that de-soldering process?
Good explanation. I wished a closer look. How does board preheating help for port soldering/unsoldering ? Thanks
It helps avoid board damage due to thermal shock. You want avoid a large temperature difference between parts of the board. So your bring the whole board temperature up a little closer to what you're going to be focusing on.
I soldered on a new micro USB port to my coworkers Bluetooth speaker and it’s not saying it’s charging. But before I soldered it if I pressed the ports prongs onto the pads it said it was. I’m guessing the solder is likeeee. Too tall and it’s shifted a little maybe. Idk though. I don’t have a microscope or anything. Just my 20/20 vision so by the looks of it I may know what’s wrong but my brand new soldering iron is being a dick and will die after 30 seconds of refilling with butane so in the mean time. You think it’s just shifted too much? Or I messed something up? Or is the port raised too much
hello, thanks for the tutorial, do you know the name of the micro usb port? there are many different models and im trying to find this one. thank you!
If the port falls off/isn't attached properly from ware and tare, do you need a new port
You need to put a bit of solder at end of the sucking heat tool , it works better
Greatings from a Soutgh African Greek
Is this also possible on my snes mini? USB micro broke after a few hours of use. Would love to keep playing on this one instead of emulating the games I want to play. Thanks in advance!
What temperature are you using for the soldering gun and rework station?
350 when desoldering (leadfree solder) and 300 when soldering (leaded solder)
I recommend adding information on why you'd want to replace the port to start with. For me it's because my old ports (and plugs) are so worn from thousands of insertions that they no longer charge continuously without keeping the charging cord pulled in one direction or another during charging. I've been doing this with rubber bands attached to the cord and my phone. New charging cords help a lot, but don't completely fix the problem. That's why the port itself needs replacing, too.
Do u have to solder or is there another option?
what happened if we did not pre-heat the whole board before start soldering ?
I've been known to just remove the old micro usb port and solder power wires to the pads. The postts are trash and break to easily.
what did you use to clean the flux couldnt hear ti properly
isopropyl alcohol
where did you find the usb-c port? I'd like to do the same and not fuss with ports that need hacking to work given the # of pin differences
edit: sorry nevermind, Im looking for converting ports from micro to type-c just noticed my search came back with yours about straight replacement of micro, good to know when these ports go bad i can straight replace, still hunting for my dream of converting fairly simply to type-c
whats the background music.please
Toe_Jam, Bonos, Atrus_Groovmacher
you can find all of them in RUclips audio library
Thanks bro for the service but it's not in order to use the hot air gun to reput the USB port since it can easily burn out the plastic part of the charging port bro. I wld recommend using the hot iron instead. Otherwise thanks.
all smd components on the motherboard are soldered in an oven that includes the usb port,
if you overheat it then you will damage it as most smd components
To clean the holes you just need strands of copper wires, bind it together, put some rosin and heat it with your solder while inserting it back and forth in the hole,
A simple solder sucker works just fine. His soldering techniques are quite bad.
If resoldering didn't work what would you suggest?
The entire repair Requires removal of old solder and installing new usb with new solder. Amazon seller for soldering station. Solder wick and solder pump.
Cash outlay> $180.00.
So for one repair, tools cost more than the tablet.
Desoldering is a slow. Cautious process to not damage the board.
Cool and all, but how to replace it with a USB-C?
Why to preheat all the board?
when you preheat the board you need lover temps on the iron or hot air to melt the solder and less time applying heat, this way you do not damage the components.
Jbc solder iron best you replace solder iron
btw, its a bit dirty but you can use a compressed air gun to push away the molten solder while its still liquid. With something like 50 psi it can push easily even the most stubborn of solder joints. No need to waste flux or solder wick like in your case. The only downside is that it leaves solder splattered everywhere so if you are not careful it can short a board or other components if say you do it from the underside of a cap. But in cases like that where you have a big hole and a clear path below it should all go to the table instead.
ps: "the solder is melted" -> "the solder is molten" (melted for cold stuff, molten for hot stuff)
“Melted” Definition: “Changed from a solid to a liquid state.” This is what is happening here. I suppose if you want to approach it as a technical chemistry definition, you may be right but is it really a necessary criticism here? It’s a how to video on soldering, not chemistry 101. Something to consider as you’re blowing your “molten” solder all over the place with your air gun😂😂.
@@victoryak86 I appreciated the bonus vocabulary lesson. Piling on too much teaching at once can burn a guy out, but incidental morsels such as this are helpful.
Clean your tip and use more flux, will help the job.
I've always burned the board 😅...
As you can see, this is not a job for a soldering beginner. The micro USB is a terrible connector, hardly worth replacing, it will just break again very soon.
He totally plugs in a micro usb at the end of the video. Don’t believe the hype folks. 12:56
dont add music it makes the video bad
It’s fine and not distracting at all.