How To Remove Electronic Components - PART 1 / Soldering Tutorial
HTML-код
- Опубликовано: 24 окт 2022
- How to remove Electronic components is a neat guide showing common and uncommon methods to remove your soldered devices.
Including examples such as QFP + QFN IC removal and an easy AWESOME method for removing your header connectors. Also featuring various ways to remove Electrolytic capacitors including a really cool easy uncommon method , you will really love this one.
Part way through the video see how you can protect your plastic parts while using a heat gun close by with the cool silver foil tape method.
I have also posted a PART 2 of this video with more great examples of common and unusual removal methods that may help you in the future.
If you wish to see more future releases by Mr SolderFix please be sure to like and subscribe.
Thank you for your time and good luck with all of your soldering projects.
Mr SolderFix
#smdrework #soldering #pcbrepair 
Наука
I really liked the thick wire against the 5 pin connector.
It's so simple, but someone's got to come up with the idea. Thanks for that idea.
Hi , thank you for your comment, much appreciated. Yes it really is a simple trick and it does work so easily as shown in the video . It's much safer than trying to remove all the solder from the barrels around the pins. I'm glad you enjoyed it . Thanks again , take care 👍
That was my WOWEEE moment too!
Hi , thank you, I'm glad you found the video of use 👍
@@mrsolderfix3996 I haven't been in the situation yet, but when I run into it, I'm going to use it. This was (for me) so out of the box that it will be remembered.
So please go on and keep on surprising your viewers with new tricks :)
Hi , thank you for your comment, I will keep posting when I can , hopefully the videos continue to be of use to people . Thanks again , take care 👍
This is a FANTASTIC video! Makes what I have always believed to be huge problems look so easy to solve!
Hi , thank you for your comment, very much appreciated. I'm glad you enjoyed the video . If my channel can help a few people out with their soldering issues then that's great . Thanks again , take care 👍
Your channel is the first channel attracts my eye and not waste time to watch your video. Your are really straight forward and practical, while other videos with the same subject drives me confused. They talk too much about tools, theory, and impractical. But your channel is straight forward, I can copy and do it on my own after watching your video with ease. I was curious much on how to repair the PCB, and one of your videos solved my curiousity. Hope you can have more videos on how to repair and rework the PCB.
Hi , thank you for supporting my channel , your time is very much appreciated . If my videos can help a few people out with their soldering / desoldering issues then I'm happy . I will always post some more videos when I get some spare time . I'm glad you enjoy my channel , thank you again for your kind words , take care 👍
That single row pin connector trick was amazing ! Cheerz .
Hi , thank you for your comment , much appreciated. Yes it does work really well and can work for some 2 row headers if all the pins are close together and can be heated at the same time. Thanks again , take care 👍
Nice work! I can’t believe I never thought of applying additional flux to solder braid or of using aluminum tape to shield other components! Thanks for a great video.
Hi , thank you for watching the video and commenting , very much appreciated . I'm glad you found the video of use , great to hear that . Thanks again , take care 👍
Very Good techniques. Especially liked the in-line pins removed with a wire trick. Very helpful. You can teach old dogs new tricks. TY
Hi , thank you for your comment, very much appreciated. I'm glad you enjoyed the video , if I can help a few people out then I'm happy . Thanks again , take care 👍
Bow Wow ❤
You have a great calm style of explaining - super clear - thank you!
Hi , thank you for watching the video and commenting , very much appreciated 👍
Not a solder pump insight. Nicely demonstrated. 👍🇬🇧
Hi , thank you for your comment, much appreciated. I'm not a big fan of solder pumps , I've probably mentioned it in a few of my videos , I much prefer solder braid , personal choice I guess. Thanks for watching , glad you enjoyed it , take care 👍
Really helpful video. Using the bit of wire for the connector is a great idea. I have a 4 day SMT rework course coming up and this has helped me get a head start. Cheers
Hi , glad you enjoyed the video . I've got plenty of other videos on soldering on my channel ( you probably know this ) the claritys got better as I've gone along . Maybe some of these can be of use to you . I hope you get on ok with all your courses , projects etc , thanks again , take care 👍
Very hypnotic watching the best methods of removing all those components. Great video 👍
Hi , thank you for watching the video and commenting, very much appreciated. I'm glad you enjoyed it . I've posted a few other removal videos with another one being posted shortly , hopefully these can help a few people out . Thanks again , take care 👍
4:00 As a newbie, I couldn't help cackling when the second soldering iron appeared on screen 😂 It's so simple!
Hi , thank you for your comment , much appreciated . 2 irons really is a great method , in fact I've done a total video on my channel showing the benefits of using this method . Thanks again for your support, take care 👍
Appreciate one really important reminder: be patient. Thanks for another great video, Mr. SF
Hi , thank you for your comment, much appreciated. I'm glad you enjoy the videos , take care 👍
Loved that! The two iron job is great. Well done Guv!
Hi , thank you, I'm glad you enjoyed the video 👍
Another great video, i especially liked the two iron method, that will come in handy as i have a few to replace on some Roland synth expansion boards, also the trick of using the wire to increase the heat coverage from the single iron, simple but so effective! Thanks again.
Hi , thank you for your support of my channel , very much appreciated. Hopefully I can help a few people out with my videos. Thanks again , take care 👍
Did a quick 2-soldering iron tutorial for SMD caps a few years ago, but it's nice to see someone else doing it too. It's good to see soldering techniques being passed on, it's the foundation for long-lasting work. I must find the time to do more videos.
Hi , thank you for your comment, much appreciated. I'm glad you agree on the 2 iron method , I just love using 2 irons for lots of different soldering situations. If you do start posting more videos I hope they go well for you . Thanks again for your comment , take care 👍
I have to say….. I used the two iron method before as well. Nice video I enjoyed it.
Hi , thank you for your comment, much appreciated 👍
2 irons are awesome, i also realised with hands on approach that 2 heat guns can do also miracles for desoldering. I had to desolder 12 points toggle switches and some SMB connectors. With one, i fried the boards until they desolder, with 2 job done fast. Mind you about the switches, the footprint was wrong, they made contact but didnt pass through-hole. So they where soldered with 138 degrees paste poured all over the contacts on a hot plate. So it was not as strong bind as if the switch fit the footprint.
Today was the first time I found your channel, as an old tech dog I was still able to learn a couple of new tricks. That encouraged me to subscribe to your Channel. My early days of triodes and transistors was no preparation for smd work. Enjoyed your video.. keep it up. Thanks again.
Hi , thank you for your comment, much appreciated. I'm glad you found my channel and enjoyed the video . I've tried to improve my videos as I've gone along ( my early ones are definitely not as clear as my later ones ) , hopefully some of them prove useful for you . Thanks again and good luck with any soldering projects you take on 👍
Really excellent tutorial - lots of must know tips and tricks! Thanks so much.
Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video, hopefully it can help a few people out with their soldering issues.
I've posted a few rework videos on RUclips now with other great methods that may be of use . Thanks again , take care 👍
Never thought of two irons. This opened my eyes! Thanks for sharing!
Hi , thank you for your comment, much appreciated. I love using 2 soldering irons together, this method is so easy for certain situations. In fact I posted a complete video on RUclips a while back dedicated to the 2 iron method. Thanks again for your support of my channel , take care 👍
Loved the 5 pin TH trick basically taking out of the board. Great stuff!
Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video , the wire trick along the pins really is a simple effective method . Hopefully these rework methods and ones shown in my other videos can help people out . Thanks again , take care 👍
I've never seen the use of two soldering irons. It looks like a really quick and effective way to remove components. I definitely got to give it a go, thanks!
Hi , thank you for your comment, much appreciated. I love the 2 iron method so much that I've posted a complete video on my RUclips channel showing all the benefits of using 2 irons . Is definitely one of the best things to help with soldering I've ever learnt. Thanks again , take care 👍
@@mrsolderfix3996 Oh fantastic! I'll take a look. Thanks a lot!
Hi , no problem , thanks for your support 👍
I've seen devices that have, essentially, a tweezer thing on a soldering iron lol. Achieves the same result, but if you have a second iron, no point in buying a third!
Hi . You can buy soldering tweezers but personally I much prefer using 2 irons as if you need to for example bring the irons in from different angles you can do , whereas with the soldering tweezers you cannot achieve this , so for me 2 irons is a much better option.
Another fine instructional video. It looks like you are using a cable tie end as an applicator for the flux. That's good use of materials at hand.
Very informative .... I've been trying to remove electrolytic caps on a retro console without damage and this video illustrates some very good practices. Thank you for sharing
Hi , thank you for your comment, much appreciated. I'm glad the video proved helpful to you and hopefully you get on ok with your soldering projects. Thanks again , take care 👍
I always tell people to use much more solder to desolder than to solder. An important reason to clip off the used solder braid instead of just working your way up to clean braid is that the used braid draws away the iron's heat, and you don't want that to happen.
This is the only one in the series I've seen as yet, but it's clearly a very good instructional video series with professional video standards, and I will suggest my soldering class students watch it. Thank you.
What camera setup are you using for these great close-ups of what's happening? It looks like it's perfect for this kind of work, and for inspection as well.
And it is always a good idea to minimize any tool or materials (i.e. flux, hot braid) contact with the wafer board. Non?
Hi , I personally use lots of flux , soldering is so much easier and you will definitely get better joints with flux without it you will struggle at times. Thanks for your comment 👍
@@mrsolderfix3996 You are very welcome. I remember when I started, the flux residue could cause damage. I was curious if you had a preferred cleaner to use ? Thank you for your attention.
Hi , thank you for your comment. The flux I have used for many years is SMFL200D , a non clean , non corrosive flux , so if any remains on the PCB after cleaning you will be ok . Unfortunately it's been discontinued recently. Old style flux if left on could cause electrical shorts as it could cause joints to grow solder fingers , but that was long ago.
I have posted a video on RUclips showing my preferred cleaning fluids and how I clean boards . All the information is in that video . Thanks again, take care 👍
Great video. Anything with 8 or more pins has been a pain in the past, but these methods should make it much easier.
Hi , it definitely is a good method . I will probably post another video on RUclips soon showing more examples of where this method can be used . Thanks again for your time , take care 👍
Cheers! Thanks for all the interesting episodes, sharing all your knowledge and experiences...
Hi , thank you for your comment and support, very much appreciated. I'm glad you enjoy the videos and find them useful. If I can help a few people then that's great . Thanks again and good luck with all of your soldering projects 👍
Brilliant technique and excellent photography. I enjoyed learning something new, thank you. All the best.
Hi , thank you for watching the video and commenting , very much appreciated . I'm glad you enjoyed the video and found it useful , hopefully it can help a few people out with their desoldering issues . Thanks again , take care 👍
You are the man, takes a lot to show me something I don't know and that's what you have done
Hi , thank you for your comment , very much appreciated. I'm glad you enjoyed the video , I'm still seeing things these days that I've never seen , I've always said no one knows everything , but if we can all share knowledge and ideas then that would be great . Thanks again for your support , take care 👍
This is amazing, you make it look so easy, I'm new to this stuff and I still have trouble wicking away solder, it doesn't seem to melt :( but I'm getting much better each try! thanks for posting this up!
Hi , thank you for your comment, much appreciated. The more you can practice your soldering you will definitely get better . The main things are a decent iron tip , correct size solder for the job you are doing and flux . Hopefully I cover a lot of the things that are important in my videos so stick with it and watch yourself improving daily. Thanks again , and good luck with all of your soldering projects in the future 👍
Try soldering the wick just a little to help get the heat transfer started. Once the flow starts it will slurp it right off the component/board.
I've been contemplating how to remove a battery that is soldered onto a circuit board. It has two tabs, one on each side. Your suggestion to use two soldering irons is, well, brilliant!! Now I can't wait to get to it. Thank you!
Hi , thank you for your comment. 2 irons is a great method that I use a lot . Just be careful with your battery as sometimes they can overheat and pop , hopefully you will be ok . If you do it fairly quickly should be fine. Thanks again , take care 👍
When desoldering a battery, be sure to wear eye protection; I've encountered battery-electrolyte leakage that sparks and spits when heat is applied to the solder joints, even when the battery measures stone-dead. BTW, If the battery has any voltage left on it, cut the battery out with side cutters if possible and unsolder the two terminals separately,
Hi , thank you for your comment, much appreciated. Definitely good advice you've given there , we can all help each other so thank you for that 👍
The wire trick at 21:41 melted my brain and was obvious in hindsight. Less melted mechanical switches!
Hi , thank you for your comment, I'm glad you enjoyed the video. The method really does work , hopefully it can help a few people out . Thanks again , take care 👍
Great video and techniques!
I've in the past, used the wire technique for removing smaller QFN & SOIC chips too (doesn't work on those with thermal pads obviously) because I didn't have a hot air gun.
You'll want to use a slightly thicker solid core wire and bend it into shape around the pins on all sides; then flood the pins and wire with flux and solder and use the iron to heat up the wire and keep the solder molten and just remove the chip.
That was my poor man's technique since cheap hot air rework stations weren't a thing back then - Aliexpress and the likes weren't a thing so a 'cheap' hot air rework kit would have been in the hundreds of dollars.
Hi , thank you for watching the video and commenting , your time is very much appreciated . It's always nice to hear other people's soldering experiences , the more we put out there the better for people looking for answers . Thanks again , take care 👍
Watching this video was so relaxing... Great camera work!
Hi , thank you for your comment, very much appreciated. I'm glad you enjoyed the video , hopefully it can help a few people out with their soldering issues. Thanks again, take care 👍
Some pretty interesting methods. If you are not looking to replace any of those components back on, you always have the option to cut the leads and remove the component and than remove the individual leads one at a time... Done that a lot...
Hi , thank you for your comment, much appreciated. Your right cutting the legs is an option if you don't need the component anymore. I actually showed this exact option in one of my earlier videos ( 4 ways to remove smd IC ) and like yourself I too have used this method on numerous occasions . The one thing I would remind people is check whether the part has a thermal pad underneath because then you would need the hot air rework method . Thanks again , take care 👍
you put out some good info not seen in other channels .....good work
Hi , thank you for your comment, very much appreciated. I'm glad you enjoy the videos , if I can help a few people out with their soldering issues then that's great. Thanks again , take care 👍
I really enjoyed this tutorial. I have a dead USB controller on a Raspberry Pi 4 I need to replace from a donor board and I've been putting it off. I'm going to do A LOT of practice before moving on to the actual part using your methods. Thanks so much for this.
Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video and found it useful . I have many videos on my channel showing all different aspects of soldering , maybe some of these will be of use to you . Thanks again and good luck with all of your soldering projects 👍
Brilliant as ever, always something to learn from your videos thank you. Shared on twitter incase it's helpful to anyone.
Hi , thank you for your support of my channel and for sharing it. I don't really do enough to promote the channel , maybe I should do a bit more so it's been
good you've helped me , thank you 👍
So many good tips, love your videos mate thank you 👍
Hi , thank you for your support, much appreciated. I'm glad you enjoy the videos , if I can help anyone then I'm happy . I will always post more videos when I get some spare time . Thanks again , take care 👍
Just brilliant, wonderful. Thank you for sharing.
Hi , thank you for your comment, very much appreciated. I'm glad you enjoyed the video , hopefully it can help a few people out with their soldering issues. Thanks again , take care 👍
Nice work! Very educational!
Hi , thank you for your comment , much appreciated. If I can help a few people with their soldering then that's great. Thanks again 👍
You’ve great skills and can teach very well, subbed!
Hi , thank you for your support, it's very much appreciated. I'm glad you enjoy the videos and you find them useful . Thank you for subscribing 👍
Very informative video, I specially enjoyed the blue through hole wire method.
Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video , hopefully it can help a few people out . Thanks for supporting my channel , take care 👍
Spot on video, thank you. Can't wait for something to fail now.........
Hi , thank you for watching the video and commenting , very much appreciated 👍
Very well explained. I'm trying to learn it your presentation makes a lot of sense. Cheers.
Hi , thank you, I'm glad you enjoyed the video and found it useful 👍
Absolutely amazing video!! Thank you very much for sharing years of experience! 🙂
Hi , thank you for your comment , your support is very much appreciated . I'm glad you enjoyed the video , hopefully it can help a few people out , if it can then I'm happy . Thanks again , take care 👍
Really satisfying, one of the best video out there for people that loves "asmr" like video for desoldering :)
Hi , thank you for your support, very much appreciated. I'm glad you enjoyed the video and hopefully other people find it enjoyable as well . Thanks again, take care
Amazing. Just the help I needed. Thanks.
Hi , thank you for your comment, much appreciated. I'm glad the video was of use to you . Good luck with all of your soldering projects in the future , thanks again , take care 👍
Thanks 💗 for sharing beautiful knowledge about Removed components from p.c.board
Hi , thank you for watching the video and commenting , your support is very much appreciated 👍
Another excellent video! Thank you!
Hi , thank you for your comment and support, very much appreciated. If I can help a few people out with any soldering issues then I'm happy . I'm glad you enjoyed this video , thanks again , take care 👍
You make it look so easy!!, thanks for the tips
Hi , thank you for watching the video and commenting , much appreciated . Plenty of practice and you get to know what works and what doesn't. Also you learn what thickness solders are best ( I only really use 0.25mm and 0.5mm sizes ) , different tips for each specific job , these sizes will become known to you . If my videos can help people along the way then I'm happy . Thanks again , take care 👍
This is so relaxing to watch.
Hi , thank you for watching the video and commenting , very much appreciated 👍
Thanks for your teaching, very useful! fans from Taiwan
Hi , thank you for watching the video, much appreciated. Hopefully I can help a few people , take care 👍
Excellent tips.... For aluminium tape - Screwfix (and others) 2" Plasterboard Tape. Its also great for RF Shielding inside Platic Housings. It makes conductivity when layers are stuck to each other.............
Nice tutorial especially the five pin trick. Good job
Hi , thank you for watching the video and commenting , very much appreciated . I'm glad you enjoyed the video and found it useful , that's great to hear . Thanks again , take care 👍
Great stuff as always , thank you 👍
Hi , thank you for your support of my channel , I'm glad you enjoyed the video 👍
Thanks for the informative video, you make it look so easy :) Sometimes I encounter SMD resistors, capacitors and even chips that are glued to the board and at times its a nightmare to remove them. ( I am mentioning the little glue bead under the component). I am asking if you have any method when you come to removing glued components. Thanks.
Thanks mate! Very useful. Love to see more
Hi , thank you for your comment, much appreciated. I will hopefully post another video shortly showing a few more removal methods . Thanks again for your support 👍
For the electrolytic capacitors I found if they are really old and have leaked on to the board it is easier to put some pressure on the cap and then just cut them with some wire cutters near the bottom and just pick off the left over.
Thanks. Very net and efficient and effective and more to the point
Hi , thank you for your comment, much appreciated 👍
I did electronics as a kid back in the 90's, never had any trouble with through hole stuff. Professionally i moved to the stuff where something like 5g95NYY is your bread and butter.
No i am returning to electronics and everything is SMT. Have to relearn everything. Also RoHS wasn't a thing back in the days. At first i thought i was going crazy. I knew that i had to apply more heat but esp. tarnished solder joints were an absolute p.i.t.a.
So, thanks, much appreciated.
Hi , thank you for your comment, much appreciated. Hopefully you will enjoy returning to doing electronics and maybe my videos can help you a little . Good luck with all your projects , thanks again 👍
Thankyou for the tutorial. Very useful
Hi , thank you for watching the video and commenting , your support is very much appreciated 👍
exactly what I was looking for, thanks a lot!
Hi , thank you for your comment, I'm glad the video is of use to you . Take care 👍
Very informative video, cheers mate, keep up the great content. 🤙🏼🇦🇺
Hi , thank you for supporting my channel , very much appreciated. I'm glad you enjoy the videos , I will keep posting while people seem to find them useful . Thanks again , take care 👍
Excellent. Soldering is an art like thing.
Hi , thank you for your comment . I hope my videos can help a few people out , hopefully we can all get better , take care 👍
Some great tips here thank you I had issues with boards popcorning, I think my heat was too high with a low airflow, after watching your video
Hi , thank you for your comment. Good luck with all your soldering projects in the future 👍
Great explanation and techniques.
Hi , thank you for your support of my channel, much appreciated. I'm glad you enjoyed the video , hopefully it can help a few people out with their desoldering issues. Thanks again, take care 👍
Very good informative video, thanks for posting
Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video, hopefully it can help a few people out with their soldering issues. Thanks again , take care 👍
Home made de-soldering braid, you get an upvote and sub. Excited to see what other goodies you have.
Hi , thank you for your support, much appreciated. Hopefully you find some of my other videos of use . Thanks again , take care 👍
These videos are super helpful!
Hi , thank you for your comment , it's very much appreciated . All I want to do is help a few people out with their soldering / desoldering issues , if I can then that's great . Thanks again , take care 👍
That's great! Thank You very much!!! Peace and good to You!
Hi , thank you for watching the video and commenting , much appreciated 👍
Very good. I'm personally not too worried about pads. As long as I keep the force to a minimum, to just be able to lift the component
Hi , thank you for watching the video, very much appreciated 👍
very nice thank you for our teaching
Hi , thank you for watching the video and commenting , your support is very much appreciated 👍
Great tutorial. Thanks.
Hi , thank you. I'm glad you enjoyed the video, hopefully it can help a few people out . Thanks again , take care 👍
satsfying to watch !
Hi , thank you for watching the video and commenting , very much appreciated 👍
Excellent work!
Hi , thank you for watching the video and commenting , very much appreciated 👍
thanks for sharing your professional skill
🙇
Hi , thank you for watching the video and commenting , much appreciated . Hopefully my channel can help a few people out with their soldering / desoldering issues , if it can then that's great . Thanks again , take care 👍
Proper Wow moments in there Sir :)
Hi , thank you for watching the video and commenting , very much appreciated 👍
Very neat & clean.
I have scrap circuit boards up the ass, so I have plenty of scrap stock to work with & I would probably be able to build my own homemade devices which I've always wanted to do.
beautiful work!
Hi , thank you for your comment, I'm glad you enjoyed the video . Hopefully it can help a few people out 👍
I like and how you did the electrolytic cap with the pliers. Mr. Carlson's lab showed him twisting them off in one motion, but I've seen pads get lifted that way. I'd much rather take your gentler approach.
Hi , thank you for watching the video and commenting , much appreciated . Twisting the larger ELECTROLYTIC caps off gently , side to side has worked for me so many times . Never taken a pad off . Tried all methods , for the large ones 100% the best way
Thank you again for your support , take care 👍
I think I'll stick to desoldering the electrolytics. With my luck the pads will tear/rip if I tried to take the caps off by twisting. 😆😆 But, I gotta try it on a scrap board just to see how it feels. Great video!
Hi , thank you for watching the video and commenting , very much appreciated 👍
That was first class of work..., Sir....what is your microscope brand.. I'm planning to go for one. Thank you very much indeed.
Fantastic sir, very best method s,to removing electronic parts, very very good 💯😊 thankyou sir
Hi , thank you for watching the video and commenting , your support is very much appreciated 👍
thanks for this. i have some boards i have made mistakes on and need to redo
Hi , thank you for your comment. I've posted a few rework videos on RUclips now , hopefully some of the methods I've shown throughout these videos can help you out with your soldering reworks . Thanks again , good luck 👍
thanks for this great tutorial
Hi , thank you for supporting my channel , very much appreciated 👍
Hello, I really enjoyed the video and the explanations. I am not a professional in the field and I wanted to please ask what is the reason for putting FLUX before heating with hot air or working with a soldering iron ? Thanks in advance
Hi , thank you for your question. Solder already has a thin core of flux inside it but as soon as it's heated it tends to burn away before the joint is fully formed . Adding a layer of external flux before soldering extends the flow time giving you a much better chance of a nicely shaped , flowed joint . If you ever have solder spikes and your struggling to get rid of them add flux , reflow and they will be gone . Hope that helps , thanks again 👍
@@mrsolderfix3996 Thank you very much for the detailed and professional answer
Hi , no problem , all the best 👍
10:25 Yes...YES!!! I Was looking for how to remove these!
Great video! Thanks 👍. Question:
What kind of tool do you use to see all these small parts? A microscope? If so, what kind?
Excellent tutorial
Hi , thank you for your support, very much appreciated 👍
Magic Video!!!! Thank you!!!🙂
Hi , thank you for watching the video , much appreciated. I'm glad you enjoyed it and hopefully found it useful 👍
great video sir. Thanks
Hi , thank you for watching the video and commenting , much appreciated 👍
Very useful video
Thanks
Hi , thank you for watching the video and commenting , much appreciated 👍
Happy new year
Thank you for your time to go into detail how to remove these components. I like the two soldering iron method. Please could you advise whether two 80 watt digital temperature adjustable soldeting irons would work ok for the small components or whether they would be to much?
Im thinking of buying a couple from a well known auction site.
I only have a 15 watt and 30 watt fixed temp irons and i have smoked nearby components in the past.
Would you recommend upgading as they are only about £20 each.
Thank you for your time. Have subscribed and look forward to more videos.
Thanks for sharing your ideas it's to very helpful to the newbie like me. Great video tutorial lods God bless ang more power to your channel. ❤
Hi , thank you for your comment , very much appreciated. I'm glad you enjoy the videos , hopefully they can help a few people out with their soldering / desoldering issues. Good luck with all of your soldering projects in the future and thanks again 👍
I'd never have thought you could leave the soldering iron on the cap feet for 10+ seconds (around 11:55 mark), it's a relief to see I've been a little over-cautious.
Thanks. Good tips.
Hi , thank you for watching the video and commenting , very much appreciated 👍
@21:36 🤯 great trick!
Hi , thank you for watching the video and commenting , much appreciated 👍
An old toaster oven: Put the board in and when it is hot enough, take it iout of the oven and give it a smack on the counter and everything falls off.
Lmao!!!!! I don't know how often I would want everything to fall off the board.
@@REXXSEVEN Say when repairing motherboards, do it with a scrap motherboard and you got plenty of the tiny glue IC for datalines or onboard power regulators, which are too small or too inconveniently placed to desolder manually.
@@Tore_Lund Yes. I was thinking that would be true with scrap boards, it would make a lot of sense. Because if it was a board that someone wanted to change a single component on, then those results would be hilarious!
When I first started your video I thought "just another solder video" but I was wrong, I learned quite a bit, you have good tecniques.
Hi , thank you for your comment, very much appreciated 👍
thabk you very much for good the tutorial sir..
Hi , thank you for watching the video and for your comment. I'm glad you enjoyed the video , hopefully it can help a few people, take care 👍
Nice information and techniques, as always!
I've had trouble with the heat gun melting solder in the small parts surrounding a big chip I was trying to remove. I get the impression from your demonstration that I should concentrate more on the "inner" parts of the big chip; maybe just a little air out onto the pins, but... most of the heat is going to flow through the chip's package out into the leads, instead of trying to heat up the pins directly. Does that make sense? Is it right?
Hi . I occasionally get small parts surrounding the IC that's being removed melting as well so if I'm worried parts will shift I usually put a silver foil tape ( sticky backed ) over these parts protecting them from the heat so the solder on them won't melt. Some people use Kapton tape for this but heat will go through Kapton and the parts will still unsolder and potentially move.
You are right , go round the edge to warm the area then concentrate on the centre .
Hope that helps 👍
Great video coverage
Hi , thank you for your comment , much appreciated . I'm glad you enjoyed the video 👍