Bronco Restoration Day 7 - Chassis Assembly
HTML-код
- Опубликовано: 25 июл 2024
- I bought this Bronco for $2,000 and my plan is to fully restore it, and at the end sell it. I’m keeping track of every dollar and hour spent so see what kind of profit I could get in the end.
If you are doing a Bronco Restoration or think you will want to in the future, subscribe to my email list.
EMAIL LIST
👉🏼 mailchi.mp/327d6334d900/bronc... 👈🏼
00:00 - Bronco Restoration Day 7
01:45 - Early Bronco Rear Suspension Build
04:25 - Bronco Front Suspension upgrade
10:52 - Dana 44 Knuckle installation
11:35 - Early Bronco Power Steering Upgrade
15:36 - The Breakdown
Hours spent:
5 hours - Rear suspension
6 hours - Cleaning and painting parts
6 hours - Front suspension
2 hours - Knuckles and Ball Joints
4 hours - Steering components
Money spent:
$1100 - 2.5 inch lift kit with Bilstein Shocks bit.ly/2-5inchLiftKit
$40 - Radius Arm bolts bit.ly/RadiusArmBolts
$30 - Leaf Spring Bolts bit.ly/LeafSpringBolts
$30 - Lower shock bolts amzn.to/3nr9c1y
$70 - Dana 44 Ball Joints bit.ly/D44BallJoint
$30 - Bump stops bit.ly/BumpStop
$20 - Upper coil spring retainer clip bit.ly/CoilRetainerClip
$290 - Tie Rod and Drag link bit.ly/TieRodDragLink
$100 - Adjustable Trac Bar bit.ly/TracBar
$80 - Eastwood 2K Primer amzn.to/3nrXcwH
$70 - Eastwood 2K Black amzn.to/3AeKg4Y
$20 - Power Steering Box reinforcement bracket: bit.ly/PSFrameBracket
$1,500 - Power Steering Kit bit.ly/TBPPowerSteering
Tools used:
Impact Driver - amzn.to/3aTOdBE
Impact Socket set - amzn.to/3HydrBT
Bearing Race Driver - amzn.to/3mELYop
Touque Wrench - amzn.to/3NCBssG
Floor Jack - amzn.to/3OQtFIP
Jack Stands - amzn.to/3OP3fao
Parts re-used:
Radius Arms
Radius Arm Caps
Knuckles
Leaf Spring Shackles
Coil Spring Bolts
Thanks for watching and be sure to SUBSCRIBE so you'll have more Early Bronco video's in your inbox! 📬
👕 10% Off Shirts! Use promo code: RUclips bit.ly/NashEB 👕
🛠 Here are some of my favorite tools 🛠
www.amazon.com/shop/nashville...
👉🏼 My steering wheel 👉🏼 amzn.to/2NNX4on
➡️ www.nashvilleearlybronco.com ⬅️
🎥 SUBSCRIBE: bit.ly/2l5gZA0
📷 INSTAGRAM: bit.ly/NEBInstagram
💻 FACEBOOK: bit.ly/NEBroncoFacebook
#earlybronco #classicbronco #fordbronco - Авто/Мото
MAN!!! This series is what will ultimately drive me to take my '70 apart and just dive in with the restoration! Thanks for chronicling all of your progress!
Haha! It is really fun! Thanks for watching
Outstanding job & tutoriales Mr Nash thanks ,sharing,Say hello Jorge,from panamá.
Say hello jorge
Thanks Jorge!
I don’t normally comment but you asked. I love what you’re doing for us and the Bronco. Two big thumbs up.
Awesome! Thanks for commenting and watching
Always go with spring packs vice blocks. I've had blocks break & it can be a bad day. Loving this project. I wish I had the skill & resources when I had my 76 Bronco to see it through 😕
It’s time for me to spend some more time on it
Rock-n-Roll, good show. Thxs
It was a good show!
Looking sweet John! I’m restoring a 66 for my wife. I’m sure yours will be done way before mine. Just assembled the 9” this weekend including rear disc. Just watched your video earlier today on the 23 gallon rear tank installation. That’s tomorrow’s project. I love having Tom’s in my backyard.
Haha! Yeah I’m jealous of you! Good luck with the build
go John go! great info. thank you again
Thank you!
Great job, Details on build are awesome.
Thank you!
Great content it’s the perfect amount of explanation
I appreciate that!
Thanks!
I think I’ve seen all your videos, I like watching your videos to see your ideas. It’s good to see different ideas on how to do something 👍
Man, thank you! Thanks for watching!
Me too! I have binge watched almost all his videos. Extraordinarily great content
Haha! Thank you!
They tips on building the frame were priceless. Thanks!
You bet!
Glad to see you’re back. Will watch the other two and catch back up.
Awesome video!
Thank you!
I'm 70 and got a 77, want to start on, was going to let's a shop do it, but got rip off , got it back home, planning on now doing myself.
Sorry you got ripped off, good luck with the build!
Great video
Thanks man!
This is a great synopsis of chassis assembly on an EB. Thanks for the shout out.
Haha! Yeah man. Learning from the best
Enjoying the breakdown. Looking forward to the next video!
Awesome! Thanks for the feedback!
Looking good! will be watching all videos to come.
Awesome! Thanks for watching
Just started watching your videos this year, really enjoy them. Im wanting to get a 1st gen bronco and your videos have been great with showing me whats waiting for me if i dont get a bronco thats already restored. Keep up the great content
Awesome! Good luck finding one!
Awesome job!
Thank you
Helpful. Thanks
Thanks for watching!
Also, I think the idea of a complete library on repairs/ restoration is a fantastic idea. Of course, I really like torque specs in those types of videos - even if they require several disclaimers about accuracy. I appreciate you taking the extra time to do your repairs and improvements and share it with us!
Thank you!
Looks great
Thank you
Great Video!! Thanks
Thank you!
Was waiting on another update....I used all of your videos to help build my 67... thanks for sharing your knowledge!
That’s awesome! Glad I can help
Cool dude I wish I kept track of the hours on my 90 Bronco
Yeah it’s actually been less than I thought
Looking awesome! I’m glad to see that you went with the Bilstein shocks…..you just can’t go wrong with them!
Love Bilstein
Its helpful i'm replacing power steering on my 74 this weekend. when ever i get stuck on something i watch your video. Thanks for your help. John
Awesome! So glad to help
I'm really enjoying watching the build. Looking forward to the next episode.
Thank you!
Great video series. I'm getting ready to start my 73' and this is really helpful!
Awesome!
John,
I am enjoying watching. I have been working on my 68 for 1-1/2 years and am installing the tranny and transfer case before I set the body on. At this moment, I am dealing with the mounting supports not lining up properly with the two bolt holes on the t case adapter from the NP 435 and the Dana 20. They are 3/4” off on the drivers side and 1.5 inches off on the passenger side. I could make an adapter plate to mount it but I want to get it dead on center if possible. If anyone has a suggestion, I would appreciate the input
Good to review what I have done. Very similar in components. 95% bought from Tom’s Offroad
Always looking forward to this videos. So valuable to know all this details of time and money.
Thanks man! Any trips to the states planned for the future?
Nothing planed
Let me know if you do
Very Cool! I can’t rebuild my 77’ at this point but your channel keeps me excited about getting started someday.
Awesome!
Keep it up bro, am. Little further than you are, I have the wheels, brake lines and fuel lines, did a ZF transmission with mod kit to the original transfer case. I am not a mechanic so looking forward to more pearls of wisdom. Love your videos.
Awesome!!!
Looks good man. I have almost all these same parts sitting on my living room floor right now. LOL. Wish I could tear down my '75 that far and build up but don't have the space. Little bit at a time will get me there though. Keep up on the great videos!
Little bit at a time. It’s been two years for me, haha!
Hey Jon,
Thanks for another informative video on Bronco stuff, parts, builds, events and anything Bronco.
Keep them coming!
I have gained much information from Nashville Early Bronco and Matt's Garage(especially early seasons). Glad to see Matt bought another Bronco.
I look forward to one day meeting you in person when I have my '77 Bronco Sport Ranger on the road and going to events.
Awesome! Thanks for letting me know!
@@NashvilleEarlyBronco
I think I have watched all of your videos at least twice. Watching The BronCast E.3 right now. Great information.
Haha! You’re the best!
Well if this isn’t perfect timing. My entire week is going to be doing to be reassembling my new frame
Perfect!
Are you crazy….my wife will see how much I spent !!! Good to see more videos from you.
Hahaha! She knows about Bronco parts… but the tools… yikes!
Really enjoying the videos. on the look now for me a bronco. Won't be able to afford to go in this depth on one but I can use the videos for a lot of different things. Hey you're only a couple hours from me if you happen to be able to put me in touch with one.
Thoughtfully planned out, great video. Wish you’d made it 5 years ago
Haha! Honestly me too
I was going to build a bronco at one time. I sold the three broncos to build but I really like how you broken evrything down.
Whoa! Sold 3 to build one. How far did you get?
@@NashvilleEarlyBronco I sold all of them and move to Texas from Ohio. I do not have any Bronco anymore. I wish I. had one but in the last they have doubled or triple in price
Oh brutal! One day you’ll have one again 👍🏼👍🏼
@@NashvilleEarlyBronco thanks and great day
John, Thank you for sharing all of this content with the Bronco community! I noticed you installed a long travel - with hoops - Tom’s lift on Nash and went without hoops on this build. I’m in the process of rebuilding a 66 and was curious if you had a recommendation between the two. Truck will mostly see road use.
Thanks Scott! Hoops are really needed for a dual shock set up, or to get a larger shock in the stock location. This truck will mainly be road use, so the stock mounting point with a single shock is enough
Great videos! I'm in the process on a '73. Was wondering if you had any tips on torque down the coil cups on the radius arms?
I just posted a video on torque specs… I think they were 45-55 ft. Lbs.
I'm currently restoring a 1972 Bronco in California. It just came out of paint. The biggest lesson I've learned so far? Budget for 30% more. Because that's what it's going to cost. It's expensive. I'm 35k in new parts. 15 for paint and body. Cost of the Bronco. Engine rebuild. Trans rebuild. Of course, I could have gone without vintage air, Pro flow, a new paint job, digital gage, costly wheels, and tires... etc., but I think it's important to know going into it that it's a major investment no matter what the approach. Because once you start putting new parts on it, keeping old vent windows, original scuffed glass, old door-locking mechanisms... feels silly.
Such a good point! And realistic numbers, wow! How long has it taken so far?
@@NashvilleEarlyBronco I'm six months in from buying the Bronco. Next week, the painted Bronco will return. The engine is ready to go in. I bought almost all the parts about six months ago. I'm thinking of buying the console from Icon Broncos. It looks pretty awesome. I grew up in Nashville btw. Santa Monica now. Lot's of great-looking Bronco's out here.
That console is amazing!! Let me know if you buy it
Is there a reason you didn't go with the duff heim steering linkage like you did with your other bronco?
Hey Jon, nice to meet you at the Bronco Super Celebration in TN this past weekend! I love my NASH shirt!!! What rust encapsulator did you use for the chassis? Matte finish or gloss? What do you recommend?
Good to meet you too! I just powder coated it. No rust encapsulator
I am restoring a 71 and i plan to do it frame up. I'm slowly buying parts but in an effort to not jump ahead i was wondering if you had a sequence list of sorts or recommendations? i noticed you started with the axle rebuild, then suspension, disc brakes, brake lines, fuel tank and fuel lines... but what after that? Thinking engine, transmission and TC rebuild and install? thanks!
Yep, engine and drivetrain next
Trying to decide what size lift to go with. I’m thinking about 35” tires with no body lift and 3 1/2” suspension lift. But I’ve heard you can’t run 35s with no body lift ? Your thoughts ? Great video too 😊
35’s are pretty tight. I’m not sure what the difference between suspension and body when it comes to tire size
Actually, initially saw the mustache. Blushing, I hit the cancel button on the video thinking I had clicked on something prohibited. Looked around and noticed nobody was watching. Reclicked on the content and realized it was Bronco restoration? Nice vid Jon!
Bwahahaha! I’m glad you came back around.
John, nice work. I saw in your purchases that you got stock front bumper stops. With a 2 1/2" lift do you have to raise these up or use larger stops to function properly? Thanks.
You know, I haven’t installed them yet, so I’m not sure. Honestly I don’t think I’ll need them. The coil springs really inhibit the flex and I don’t think the axle will hit anything
Great video, but unfortunately we are on about the same pace. Our broncos will be complete when the gen 7s release ;)
Hahahahaha! I agree
Mine is a ‘76 so few little weeks but verysimilar
That's awesome!
How much time stretching out so you can sit on the floor?
Hahahaha! Man, the day after is brutual
What is the pulley size for both the water pump and crankshaft damper pulley?
Same as stock. It’s 6” outer diameter, but I’m not sure the belt groove size
I thought I had a issue with my crankshaft pulley. When the truck was running, I noticed a wobble of it. After some work, I noticed several things. One the damper was the original in 79 and required to be replaced. Another thing I noticed was the timing chain had too much slop. It’s original 79 install. So I’m in a tear down mode of my F150 302. It’s part of my frame up winter project.
I know that feeling! Good luck!
Are those 28 or 31 spline axle shafts?
31 spline
What size tires are you planning on using?
33’s
I'm king of curios about the rear Leafs. I count 9 Leafs or am I crazy?
Hmm… have I been saying it wrong all this time. I don’t think I ever counted the leafs. But you are right! I guess I’ve been saying it wrong! Haha! 9 leafs everybody.
@@NashvilleEarlyBronco 😁 Only reason I looked and counted is, I have the Toms 3.5-inch 9 leaf's . Don't be surprised that it might measure more than 2.5 -inch lift. My 3.5 measured at all most 5 inches and I'm still waiting for it to settle 🤯
Oh wow! Good to know
While grade 8 hardware might be stronger, the finish is going to deteriorate quickly, not to mention the appearance looks like you cheaped out. I can spot a hardware store bolt from a mile off.
Wheres the rest of the build
Been busy with life. Will jump back on it soon
Aren't you Ian's bestie?
Haha!
@@NashvilleEarlyBronco Really good video man. Makes me want to restore a Bronco.
You should!
Am I the only one cringing at reusing old mounting hardware? Loving the videos, but questioning some build choices.
Most of the stuff I reused has been replaced. I didn’t tighten anything down at this point because I knew I would come back to it. It’s hard to order every piece of hardware the first time, so a lot of times I would order as I was making the videos, haha!