My NEW FC Stacks Have Arrived! | SpeedyBee F7 V3 50A & F7 Mini 35A Flight Controller & ESC Overview
HTML-код
- Опубликовано: 27 янв 2023
- Unboxing and overview of the new feature packed stacks I will be using in my next 3 inch freestyle and 5 inch freestyle builds.
=========================
Items suggested in this video
=========================
SpeedyBee F7 V3 BL32 50A 30x30 Stack:
Direct: www.speedybee.com/speedybee-f...
GetFPV: bit.ly/3wzmu0p
SpeedyBee F7 Mini 35A 3-6S 8-bit Flight Controller Stack:
Direct: www.speedybee.com/speedybee-f...
GetFPV: bit.ly/3kIHP50
My Favorite Screwdrivers (Wiha Slotted & Phillips):
Amazon US: amzn.to/3tq15Eu
Amazon Canada: amzn.to/3E1Ph02
DJI FPV Goggle V2:
Amazon US: amzn.to/3H9FGZk
Amazon Canada: amzn.to/3VLHQlY
DJI O3 Air Unit:
Amazon US: amzn.to/3WZnupK
Amazon Canada: amzn.to/3jJszUR
GetFPV: bit.ly/3ioEE1s
DJI FPV Remote Controller 2:
Amazon US: amzn.to/3EPa8oJ
Amazon Canada: amzn.to/3XJRZ4w
XING2 1404 4600kv Motors:
AliExpress: s.click.aliexpress.com/e/_DnN...
Banggood: www.banggood.com/custlink/mG3...
GetFPV: bit.ly/3GQa7mz
Happymodel EP1 Receiver:
AliExpress: s.click.aliexpress.com/e/_DEH...
GetFPV: bit.ly/3GRtYC8
TBS Crossfire Nano Receiver with Immortal T Antenna
GetFPV: bit.ly/3Zm2WK6
TBS Tango 2 Pro
GetFPV: bit.ly/3QsPlgj
============================
Links
============================
SpeedyBee F7 V3 BL32 50A 30x30 Stack Manual:
store-fhxxhuiq8q.mybigcommerc...
SpeedyBee F7 Mini 35A 3-6S 8-bit Flight Controller Stack Manual:
store-fhxxhuiq8q.mybigcommerc...
BlueJay BLHeli_S Firmware GitHub:
github.com/mathiasvr/bluejay
#speedybee #fpv #drones
Mandatory Disclaimer: I participant in the Amazon Services LLC Associates Program, which is an affiliate advertising program designed to provide a means to earn fees by linking to Amazon.com and affiliated sites. Item suggestion links above are affiliate links and I will receive compensation if you choose to use them. There is no cost to you to use these links and any compensation received goes right back into the channel. 
Наука
![☀ Достойное сердце для серьезной птички [Speedybee F405 Wing Mini]](http://i.ytimg.com/vi/Ku9Na3thOuw/mqdefault.jpg)
![☀ Достойное сердце для серьезной птички [Speedybee F405 Wing Mini]](/img/tr.png)
![☀ Флагманская электроника на Васин коптер [SpeedyBee F7 V3 Stack]](http://i.ytimg.com/vi/hT7MjURAS6A/mqdefault.jpg)
The cable that comes with purchase of O3 Air Unit plugs directly into the SpeedyBee F7 V3 which I thought was awesome, I'm using their stack on my first quad
You are correct! Still would have loved a cable to be included, all manufacturers used to include the DJI connector when the original air unit released.
The speedybee stuff blows iflight out of the water.
Ya so far really good experience. Only problem is that the F7 V3 stack is really tall and I am having an issue installing it in my latest build which has a low profile frame.
I’m digging my F7 V3
Vamos Mango! Desperate Suscriber here! Thanks for all this excellent material.
I have both of these stacks, the new version 50 amp for five inch and the smaller FC for a 4 inch build coming up.
So the mini stack, already comes with the blue jay already on it?
I love mine. I just switched from 1507 motors to 2205 motors on this ESC. So far no issues.
👍
Thanks for the comment. Is this on the Mini or Full size stack?
@@Mangorille the 20x20 stack.
@@MadDragon75 Nice, those are fairly large motors for a 20x20 but then again they did test that stack at full output for 30 seconds.
@@Mangorille well, my first flight pulled 61amps I believe, in around 3 minutes on 4S.
I didn't notice any excess heat.
@@MadDragon75 Awesome!
9:05 Hi just a quick question the power inducter I see on your speedibee 50 amp doesn´t look like other reviews I saw it online your`s like round or covered by somenthing did you had any problems with the esc?
It looks like there is some protective glue/epoxy on there. No problems, I only recently got this and straight from SpeedyBee so it might be something that they've started adding to the latest ones coming off the line.
Just curious, are the schematics and firmware available for just the SpeedyBee F7 V3's top/logic board (the one with the STM32F7422, not the BL32 50A 4-in-1 Electronic-Speed-Control or 45A BLHELI32 board)?
I like that it has Barometer BMP280 , IMU/Gyro BMI270 and ESP32-S3 (bluetooth/wifi).. so just want to purchase the top alone (not the Voltage Regulators / Battery Elimination Circuit board) to play as a development board with my own sensors (ex. Beitian BN-880)
However, I'm concerned that I won't be able to flash/debug using SWD.. or if it's somehow locked to be used only with the Betaflight 3.5.2 / Emuflight / iNav firmware / app?
BTW, is there a parts list of drones/motors/GPS/etc that is sure to work when plugging the F7 V3 as a stack?
You can buy the flight controller separately but if I understand the kind of schematic you are looking for, I haven't see anything like that. You'd probably want to reach out to SpeedyBee directly and see if they can point you in the right direction. I'm working on a build with this stack and I'll have the parts list in the video description once uploaded.
the motor pads are close to the FET on the mini
Ya they are, you need to make sure the soldering iron doesn't slip.
I am having an issue with my speedybee f7 stack, Can't get inputs in betaflight, using elrs rx and tx16s tx. uarts are right, rx/tx are switched, any many variations of all the above. Did you have any issues or have suggestions, I changed rx's no change, changed new f7v3, no change. Thanks
When you run the LUA script for ExpessLRS, does it say Model Mismatch at the top where you have the number of packets?
This would be my favorite FC if i can figure out the correct resource & PINIO info for DJI aux switch.
I haven't done this before but JB has some videos on PINIO and switching things on/off with it. Maybe start there?
does this work with DJI 03 air unit?
The full size one or the mini? And are you asking if it is plug and play (no soldering) with the o3 air unit?
What’s up with the financial advice LOL you have been bombed 😮 20 comments not related to your video at all!
Yup, so obvious too.
the v2 version is absolute absolute garbage. The uarts fail randomly on 3 boards i have used. I soldered correctly all of them because they did work for about three flight. I would change the uart to a different uart and it would work again for a bit then quit working slowly and randomly after about 3 flights. Absolute Garbage.
That's annoying, thankfully I haven't had any problems at least yet on this stack.