I have carpal tunnel in my wrists and got a knitting machine to help me enjoy my hobby without too much stress when I'm just making simpler items. This device would be able to help me out even more from risking pain and inflammation. Thank you
I have these adapters on my 40 pin and 48 pin knitters and LOVE them ,yes they are a bit noisy but my arms and wrists are so happy with these. I bought them on Amazon for 39.99 each. You have to get a separate one for each sizes as the gears are different. I make hats and scarves for houseless people and donate at least 50 hats each cold season. I had questions but could not get ahold of the shipper so had to buy a new gear for one knitter as the long screw that holds the handle on stripped immediately. Now if I could power my looms so easily lol.
Hello Lynn Gravatt your approach touched me, you are the best, no matter what questions you have in the future, you can contact me, I will solve it for you unconditionally,
Just commenting to say I bought one, it's great. Make sure you have good weights to pull your work down, because it'll be hard to catch if the yarn gets stuck, but also you can control the speed. If only I could figure out a way to add in a pedal like a sewing machine... The only thing I'm not fond of is how easy it is to accidentally reverse when I'm trying to quickly turn off the machine if a stitch got stuck, but you get used to it.
I finally got it working.. i only figured it out that I need to replace it with a screw with a wider head so it wont fall off.. its working well now.. thanks.
Hola, gracias por el video demostrativo. Es una chulada de aparatito éste adaptador, mejor aún que el adaptador de la tejedora al taladro y que si tienes que sujetar el taladro también se cansa la mano. Pero lo he visto en Amazon y además de ser el precio un poco elevado, en la descripción del producto dice que es válido para la tejedora circular Sentro de 46 agujas, yo tengo la de 40 agujas y quería saber si valdrá para la tejedora 40 agujas. Podrías aclarar si vale para las dos ó sólo es para la de 46? Gracias.
Hola, ahora que compré la tejedora de 48 agujas y ví en eBay éste adaptador eléctrico Aidiler lo compré, lo he recibido y colocado en la tejedora Sentro de 48 agujas y no funciona, se enciende, mete ruidos pero el carro de agujas de la máquina no se mueve. Que le puede pasar?
@@aliciaih Can you take a video or photo and send it to me? Send it to the email address zoujinlong7777@gmail.com, I feel that there is a problem with the connection point
I bought it and just used one time. The problem I got is after 40-50 rounds, the motor stopped. I don't know what kind of motor you used, but maybe need to improves the product with other, because the product idea is really good.
@@Yana_dimensionalarray Does this happen if the adapter and machine are not installed together? I don't know now whether it is the problem of the knitting machine or my product or the thread is too thick? If it is determined that it is my product problem, I am sending you one, so please test which problem it is, otherwise I am afraid that it will still be the same result.
Gracias por su ayuda,mi maquina de tejer es nueva,le quise poner el adaptador electrico,le quite facil el tornillo pero el manubrio no se lo pude retirar,veo en el video que se quita facil pero no pude
I attached this to my Sentro as per the instructions. I turned it on, slowly, to see if it worked. Yes it was good. I then knitted about 15 rows at a fairly slow pace, nervous, I suppose! Suddenly the Aidiler went fly off the machine, it had shorn the screw attaching it!! Now what do I do?
@@patd3376 The only way is to disassemble the sentro and take out the screws. If you need a new adapter I can mail one to you. Or you can tell me if you need anything from me.
Hi! Just bought and the provided screwdriver immediately stripped the screw on the original handle. Is there any way to resolve this? It seems there is no longer any way to remove the handle. Let me know! Thanks
The same thing happened to me. My spouse used a little hand saw and cut 4 slits from the screw out like a cross. It actually broke the screw, and he could then take the handle off. I preemptively bought a replacement handle, but they way he cut it off worked perfectly, and the handle can be screwed back on if I want.
Wish mine was that easy. The screw was too short. The original handle had a plastic piece that made the adapter not fit. Had to get another knitting machine. Oh well.
Donde puedo comprar el motor de la máquina centro me podrían decir porque aquí en España no lo venden y me gustaría tenerlo porque yo no puedo movilizar mucho las manos y me canso un poco pero me gusta mucho las manualidades y la forma de hacer las labores muchas gracias espero me contesten muchas gracias
Having trouble removing the handle on my sentro machine, screw comes out but the handle won’t come off easily! I don’t want to break it, any suggestions?
ruclips.net/video/pGH4qzB6x-c/видео.html Please watch this video. If you need the gears inside, please tell me your address and how many needles the machine has. Send to my email 976185222@qq.com
@@johnbovinich8258 There is no such gear in the set. What I mean is that if you need a gear, please tell me your address and the number of needles of the machine, and I will mail one to you.
We regret to inform you that our products have been completely taken off the shelves due to some issues. We are currently upgrading the products and expect to have them back on the market in three months. I will announce the update on RUclips at that time. Thank you for your understanding and support.
I am still having problems with your product. I bought a new machine, install your product. It keeps stopping in the middle of operation, I only did 40 rows. I let it cool down, not going to fast on it and it still keeps stopping. Can you assist me. thk u
No pude encontrar en internet el enlace que me dijo por favor me podría explicar mejor dónde puedo comprar el el motorcito para la máquina centro porque no entendí muy bien como no entiendo bastante el inglés no lo entendí muy bien por favor a ver si me podrían explicar en qué centro comercial o en qué ciudad puedo comprarlo para poderlo mandar a comprar muchas gracias desde Zaragoza España
www.etsy.com/listing/1358023131/electri-knitting-machines?click_key=c628732a8e45667b845eb72c6d0f61cbfb6dc7b4%3A1358023131&click_sum=3c4e5c78&ref=hp_opfy-2&frs=1 Here is the link on Etsy
Hello,Györgyi Beer Thank you for your purchase, can you share your experience on Amazon, so that more people can understand it, we will develop a variety of models later, we can let you use it for free first, as long as you share more our product, thank you
Hi, quite an impressive accessory, however, you could save money on manufacturing if you didn't bother with the white turning wheel. If the original crank can be reinstalled after the motor unit it would be more convenient for the user. Perhaps you could consider revising your design or integrate this into your addi accessory. Also, I couldn't see the switch very well, but was there a double action switch installed? If so, can the direction be reversed? If not, can you develop this into the next model? Thanks and good luck
Hello,Maniacal Moz I am very grateful for your suggestion. We have developed a new connection point according to your idea for the position of the handle. Later products can be connected together with the original handle. The switch is bidirectional and can be operated in both directions. Addi's structure will add all your ideas to it, thanks again for your suggestions.
@@goldlong6958 i got one of these for my 40. Guess it will sit in a box because the handle will not come apart. Grrrr Sugfest... add the gear to your next model so people can enjoy it instead if looking at that box wishing.
Hi I wanted to tell you that i Bought one of these for my Sentro 48. I have been having problems with it here and there and would love if you could help me.
@@goldlong6958 There are times after just starting it will stop and then I have to kinda play with the whit turn nob to get it to start back up, Also I have noticed that the faster I go it drops stitches. Now I know I wont always get it perfect all the time, But I watch your video on how smooth it ran at a fast pace or turned up. Mine dont do that. Its all the time. Once in a while I can get it to actually perform good. Now I just cleaned my knitting machine a day after I wrote you , And it still stops after just starting it. I dont know if its faulty and I was the lucky winner LOL but I Would love for you to help me. If nothing works is there a way you could send me another one... Id be more than happy to send you this one. If we cant fix it. I do love the Idea of the machine and love how it can be hands free. Just haven't had a good experience since I got it. Please help thank you. Gin Keating Also if you need to you can Email me at Royallknits@gmail.com
Well I brought the adapter and it's nice but I did like the video did and I must have turned to much and it broke. I tried to see if it would go back on but didn't buy I do like the product.
Doesnt work! Got about 40-50 rows then it stopped and did a little jerky motion thing. The light comes on when the knob is on but flip the switch and it goes out. Sat here for an hour trying different things thinking i did something wrong but it doesnt seem like it. Sending back.
Can you tell me your address, I will send you another one and try again, this should be our problem, we will report it to the technical department, we apologize for the inconvenience caused,
What a great idea. I just bought my Sentro andI also ordered the adapter to be use with an electric screwdriver or drill from Amazon here I Canada. Will this adapter be available to buy on Amazon in Canada without having to pay import/custom fees if ordered thru the US?
I have carpal tunnel in my wrists and got a knitting machine to help me enjoy my hobby without too much stress when I'm just making simpler items. This device would be able to help me out even more from risking pain and inflammation. Thank you
That's why I've sent for one.. Its worth a try.
I have these adapters on my 40 pin and 48 pin knitters and LOVE them ,yes they are a bit noisy but my arms and wrists are so happy with these. I bought them on Amazon for 39.99 each. You have to get a separate one for each sizes as the gears are different. I make hats and scarves for houseless people and donate at least 50 hats each cold season. I had questions but could not get ahold of the shipper so had to buy a new gear for one knitter as the long screw that holds the handle on stripped immediately. Now if I could power my looms so easily lol.
Hello Lynn Gravatt your approach touched me, you are the best, no matter what questions you have in the future, you can contact me, I will solve it for you unconditionally,
The cheapest is £60 now, but worth it if it works and helps with making it less painful to use.
Having arthritis in my right shoulder, made it painful to crank, this is the absolute best thing that I could have ever purchased!!
Just commenting to say I bought one, it's great. Make sure you have good weights to pull your work down, because it'll be hard to catch if the yarn gets stuck, but also you can control the speed. If only I could figure out a way to add in a pedal like a sewing machine...
The only thing I'm not fond of is how easy it is to accidentally reverse when I'm trying to quickly turn off the machine if a stitch got stuck, but you get used to it.
I finally got it working.. i only figured it out that I need to replace it with a screw with a wider head so it wont fall off.. its working well now.. thanks.
Hola, gracias por el video demostrativo. Es una chulada de aparatito éste adaptador, mejor aún que el adaptador de la tejedora al taladro y que si tienes que sujetar el taladro también se cansa la mano. Pero lo he visto en Amazon y además de ser el precio un poco elevado, en la descripción del producto dice que es válido para la tejedora circular Sentro de 46 agujas, yo tengo la de 40 agujas y quería saber si valdrá para la tejedora 40 agujas. Podrías aclarar si vale para las dos ó sólo es para la de 46? Gracias.
Not suitable for 40 pins
Hola, ahora que compré la tejedora de 48 agujas y ví en eBay éste adaptador eléctrico Aidiler lo compré, lo he recibido y colocado en la tejedora Sentro de 48 agujas y no funciona, se enciende, mete ruidos pero el carro de agujas de la máquina no se mueve. Que le puede pasar?
@@aliciaih Can you take a video or photo and send it to me? Send it to the email address zoujinlong7777@gmail.com, I feel that there is a problem with the connection point
I bought it and just used one time. The problem I got is after 40-50 rounds, the motor stopped. I don't know what kind of motor you used, but maybe need to improves the product with other, because the product idea is really good.
Can you tell me the specific reason? You can rest assured that I will be responsible
@@goldlong6958 I don't know, because wasn't hot. Just stopped and I waited like 10 min and started again and did the same
@@Yana_dimensionalarray Does this happen if the adapter and machine are not installed together? I don't know now whether it is the problem of the knitting machine or my product or the thread is too thick? If it is determined that it is my product problem, I am sending you one, so please test which problem it is, otherwise I am afraid that it will still be the same result.
How would u do panel knitting with the electric spinner
Hi, we're not sure
Gracias por su ayuda,mi maquina de tejer es nueva,le quise poner el adaptador electrico,le quite facil el tornillo pero el manubrio no se lo pude retirar,veo en el video que se quita facil pero no pude
Try to take the machine apart and replace the gears inside with the gears we assigned to you.
Will you have these for the addi machines?
Hello Charlene Deskins yes, it will take a while
Thanks!! I'm definitely interested ☺
I attached this to my Sentro as per the instructions. I turned it on, slowly, to see if it worked. Yes it was good. I then knitted about 15 rows at a fairly slow pace, nervous, I suppose! Suddenly the Aidiler went fly off the machine, it had shorn the screw attaching it!! Now what do I do?
Is the accessory on your sentro broken? If the accessory on the sentro is not broken, you can try to reinstall it with a slightly larger screw.
@@goldlong6958 I have the shorn off screw stuck in the Sentro so I cannot re-attach the motor
@@patd3376 The only way is to disassemble the sentro and take out the screws. If you need a new adapter I can mail one to you. Or you can tell me if you need anything from me.
@@goldlong6958 Thank you. I have had a friend drill out the shorn screw and oiled it all and it seems to be fine now.
All working well now. Thank goodness!!!
It started screaming 😂 2:45
De donde lo vompraste dame un enlance para ke lo compro. Porfa
Super🤗👍adapter
Hi! Just bought and the provided screwdriver immediately stripped the screw on the original handle. Is there any way to resolve this? It seems there is no longer any way to remove the handle. Let me know! Thanks
The same thing happened to me. My spouse used a little hand saw and cut 4 slits from the screw out like a cross. It actually broke the screw, and he could then take the handle off. I preemptively bought a replacement handle, but they way he cut it off worked perfectly, and the handle can be screwed back on if I want.
Wish mine was that easy. The screw was too short. The original handle had a plastic piece that made the adapter not fit. Had to get another knitting machine. Oh well.
That's awesome! Would this be was wear and tear then using a drill adapter? Will this work on an addi too?
Hello Elizabeth Brignoni, thank you for your attention, we are developing ADDI, it will be available in about 30 days
@@goldlong6958 Good for Prym maxi too?
@@fcomme5754 sorry they don't fit
Hi, El adaptador sirve para la máquina Addi?
Hello Mito Veg it does not fit the Addi machine, the Addi adapter is still in development
Donde puedo comprar el motor de la máquina centro me podrían decir porque aquí en España no lo venden y me gustaría tenerlo porque yo no puedo movilizar mucho las manos y me canso un poco pero me gusta mucho las manualidades y la forma de hacer las labores muchas gracias espero me contesten muchas gracias
You can buy it on Etsy, search Aidiler knitting machine adapter
Omg I HAVE TO HAVE ONE.
How much does it cost ? and where to buy it from ?
39.99 亚马逊
hi do you ship to the uk will it have the appropriate plug on thankyou
The plug voltage is universal, but I don't know if Amazon will ship to the UK or not,
Panel olarak da örebiliyor muyuz ?
Yes of course
@@goldlong6958 nasıl ?
@@DEMETKURTDERE Can weave panels
@@goldlong6958 ı want to panel knitting with adapter ?
هذه الماكينه فين كاينه❤🎉
Aonde eu compro e qual é o preço, esse aparelho serve em qualquer maquininha?
www.amazon.com/gp/product/B0BG9F2BD6 Here's a link to the product, $39.99, for the sentro machine only
Price btaen isky
Having trouble removing the handle on my sentro machine, screw comes out but the handle won’t come off easily! I don’t want to break it, any suggestions?
ruclips.net/video/pGH4qzB6x-c/видео.html Please watch this video. If you need the gears inside, please tell me your address and how many needles the machine has. Send to my email 976185222@qq.com
976185222@qq.com
Ok I'll take it apart to remove the handle, I did not get any gears in my motor kit!
John
@@johnbovinich8258 There is no such gear in the set. What I mean is that if you need a gear, please tell me your address and the number of needles of the machine, and I will mail one to you.
Dónde lo puedo comprar?
We regret to inform you that our products have been completely taken off the shelves due to some issues. We are currently upgrading the products and expect to have them back on the market in three months. I will announce the update on RUclips at that time. Thank you for your understanding and support.
Thank you for the tutorial
You're welcome
I am still having problems with your product. I bought a new machine, install your product. It keeps stopping in the middle of operation, I only did 40 rows. I let it cool down, not going to fast on it and it still keeps stopping. Can you assist me. thk u
Hello gloria robertson
Can you take a video? Send to my email zoujinlong7777@gmail.com
ur a fcking legend dude honestly
Thank you for the compliment,
No pude encontrar en internet el enlace que me dijo por favor me podría explicar mejor dónde puedo comprar el el motorcito para la máquina centro porque no entendí muy bien como no entiendo bastante el inglés no lo entendí muy bien por favor a ver si me podrían explicar en qué centro comercial o en qué ciudad puedo comprarlo para poderlo mandar a comprar muchas gracias desde Zaragoza España
www.etsy.com/listing/1358023131/electri-knitting-machines?click_key=c628732a8e45667b845eb72c6d0f61cbfb6dc7b4%3A1358023131&click_sum=3c4e5c78&ref=hp_opfy-2&frs=1 Here is the link on Etsy
Thanks a lot man!
Do you make one for addi machines?
Yes, it will be available in more than 30 days
Worked , thanks a lot!
Hello,Györgyi Beer Thank you for your purchase, can you share your experience on Amazon, so that more people can understand it, we will develop a variety of models later, we can let you use it for free first, as long as you share more our product, thank you
Just get a drill bit adapter for a hand drill
,will this work on the. 32 sts machine
hi grace blanchard it doesn't fit
عجبتني بغيت بحالها
Can this be use on the addi knitting machine?
Sorry Lucy Ramos it doesn't fit the Addi machine
🎉🎉🎉🎉🎉❤❤
This is awesome. From where will I get it? Kindly let me know?
www.amazon.com/gp/product/B0BG9F2BD6 This is our product link, if you have any questions, you can contact me,
Я живу в России какая цена и можно на ней вязать носки только описание на русском языке
@@ЛюбовьГлущенко-ш2ю Hello russia temporarily unavailable for sale
I am trying to get one. Could you please tell me how can I got it. I am from egypt
Hello, for your question, please wait for me to consult Amazon and reply you thank you
Hi, quite an impressive accessory, however, you could save money on manufacturing if you didn't bother with the white turning wheel. If the original crank can be reinstalled after the motor unit it would be more convenient for the user. Perhaps you could consider revising your design or integrate this into your addi accessory.
Also, I couldn't see the switch very well, but was there a double action switch installed? If so, can the direction be reversed? If not, can you develop this into the next model?
Thanks and good luck
Hello,Maniacal Moz I am very grateful for your suggestion. We have developed a new connection point according to your idea for the position of the handle. Later products can be connected together with the original handle. The switch is bidirectional and can be operated in both directions. Addi's structure will add all your ideas to it, thanks again for your suggestions.
@@goldlong6958 i got one of these for my 40. Guess it will sit in a box because the handle will not come apart. Grrrr Sugfest... add the gear to your next model so people can enjoy it instead if looking at that box wishing.
@@NannaQueensCrafts Thanks for the suggestion, we had the same idea,
여긴
한국입니다
여긴팔지
않아서요
구매어떻게
하는지
알려주세요
You can try searching on Etsy and see if you can buy it.
Hi I wanted to tell you that i Bought one of these for my Sentro 48. I have been having problems with it here and there and would love if you could help me.
Hi Gin Keating can you tell me what problem you have? Don't worry, no matter what the problem is, we will do our best to solve it.
@@goldlong6958 There are times after just starting it will stop and then I have to kinda play with the whit turn nob to get it to start back up, Also I have noticed that the faster I go it drops stitches. Now I know I wont always get it perfect all the time, But I watch your video on how smooth it ran at a fast pace or turned up. Mine dont do that. Its all the time. Once in a while I can get it to actually perform good. Now I just cleaned my knitting machine a day after I wrote you , And it still stops after just starting it. I dont know if its faulty and I was the lucky winner LOL but I Would love for you to help me. If nothing works is there a way you could send me another one... Id be more than happy to send you this one. If we cant fix it. I do love the Idea of the machine and love how it can be hands free. Just haven't had a good experience since I got it. Please help thank you. Gin Keating Also if you need to you can Email me at Royallknits@gmail.com
Hello, I'm sorry to reply you so late, can you tell me your address, and then send me the order number you purchased on Amazon.
Because your information was blocked by youtubi
Well I brought the adapter and it's nice but I did like the video did and I must have turned to much and it broke. I tried to see if it would go back on but didn't buy I do like the product.
Hello Nathaniel Williams ii can you tell me what is wrong with the product?
Всем доброго времени суток, где можно купить
Ladies muflor r made how
Doesnt work! Got about 40-50 rows then it stopped and did a little jerky motion thing. The light comes on when the knob is on but flip the switch and it goes out. Sat here for an hour trying different things thinking i did something wrong but it doesnt seem like it. Sending back.
Can you tell me your address, I will send you another one and try again, this should be our problem, we will report it to the technical department, we apologize for the inconvenience caused,
Or send the address to our email, and tell me how many needles your machine has. If you can send the address to this email: zoujinlong7777@gmail.com
ابيش السعر المكينة حياكة
هل يمكن أن تخبرني ما هو طراز ماكينتك؟
Wow!
I am trying to get one of these on Amazon and they are sold out, is there a direct link or contact info for somewhere else to purchase
www.amazon.com/gp/product/B0BG9F2BD6 Hi Jennifer Horne this is the new link but sorry it's not up yet in stock
@@goldlong6958 It's highly necessary thing for me! Are you going to produce it in China and sell on AliExpress?
@@5435770 Sorry, we only sell on Amazon
@@goldlong6958 :-( It doesn't ship to my countries
@@5435770 Can you tell me where your country is? I'll find a way
Este aparelho é bivolt serve para 110 e 220 volts aqui do Brasil
What a great idea. I just bought my Sentro andI also ordered the adapter to be use with an electric screwdriver or drill from Amazon here I Canada. Will this adapter be available to buy on Amazon in Canada without having to pay import/custom fees if ordered thru the US?
@@DenisEssiambre Sorry, the Canadian Amazon store has not been opened yet.
@@goldlong6958 I can wait. I recently ordered both Addi machines, so when your adapter for it becomes available, I'll consider it instead. Thank you.
@@DenisEssiambre Addi's is not on the shelves yet, I will contact you when it is on the shelves, how to buy it, you don't need to be on Amazon
@@goldlong6958 once again thank you
Buyer be ware. Order from Amazon. Sending it back because It’s not that easy to put on as shown in the video.
Before purchasing, please try to remove the handle on the original machine, because we found that the handle of some machines is not easy to remove.
Were will I get one off these
@@carolinearmstrong7698 Can be ordered on Amazon
كره غاليه ما عنديش فلوس دياله
Меня нужна такие машина. Я живу Узбекистан
You can buy it on Etsy, search for knitting machine adapter
@@goldlong6958 Я не панимаю инглишн
@@qumrihondadajonova9254 Siz Etsy-da trikotaj mashinasi adapterlarini qidirishingiz mumkin
Ptevedi na bosanski
Narucila bi ovu masinu ali neznam jezik ako neko moze da pomogne da narucim bila bi zahvalna