That will be absurdly easy. Just weld a strong hoop onto the passenger side bed side. Drop the side, and have Tucker stand on the hoop,and hold onto the headache rack!
I think i'd add some outriggers to keep the truck from tilting when using the crane. You could probably use some camper lift jacks, or just some tubes that slide inside each other that can rotate up out of the way when not needed
Soon As Snow Melts Off the Rubicon Trail Bring it Here We can Assist you in the Getting Thru the Trail as far as you can Make it. Keep up the Fun Guys its Fun To watch your Shenanigans !
You guys are the modern day Three Musketeers... that looks like a really fun vehicle with a little more Work. I watched Rudy and Zack working on your Rig. He is a Very Talented Guy for sure.. Trevor, I met you with The Moor Crew in Pigeon Forge a few years ago.. Jeep Invasion there Is enormous.. You fellows be careful out there ... MWP Cosby Tn.
It’s amazing ! Been looking at FabRats issues with their roll back and wishing they would look at this. That being said, with the magic of video, I don’t even know if your two projects are concurrent, or if the engineering can scaled up. But either way well done Rudy and team ❤
Hi Trevor , just subscribed a few days go after learning what happened to you. Looks like your investigating hair replacement worked for you HappyTimes You must have the cleanest workshop in the industry. Best of luck in your new adventure, Cliff Please Stay Healthy
Hi I have been watching your new show you really do a great job I will always praying 🙏 for you 🙏 so you will be safe ok 🙏 and please be careful out there ok 🙏 you have a wonderful day and have a good night and day ok love Lorilee xoxoxoxox 🙏
I have suggested to Matt for year (s) an off road rollback. Say F-350 crew, longbed, SRW. Convert to reg cab, put 14’ *or longer* rollback deck over 6 wheel drive. There was? A kit for adding a 2nd rear drive axle. With Matt’s crew ability. It should be easy. Make it to recover side by sides, and most Jeeps, SUV, vans damaged off road. Heck both rear axle steer if he wants.
You should drill a pilot hole with a smaller diameter drill bit, like a 3/16” then step up to a larger bit. You might want to get Rudy to weld a brace from the upper portion of the crane across to the lower left side of the headache rack. Your extendable boom should also be marked for maximum acceptable load at each extension point.
It was good to see George in this video. I can totally feel his pain on the Several hundred dollar bits only to have the 12 dollar ones get the job done! lol
On my mini truck I added sumo springs to the back, they are urethane bump stop.. They are awesome and if installed right they dont stiffen up the ride like adding an extra leaf will do. I can carry 2000 lbs in there with no problems. Keep up the good work.
Nice rig, Be careful you guys, Especially Tucker, He's probably half to be the counter weight for that crane in the field, Off camber slopes is see in your future. ❤🎉
You say you want to know what color to paint the Bumper. You need to come up with A color that represents your channel. If it's OD green then you need to paint it OD green in the front, back and the side panels. I think OD Green would be great.. Good luck and God Bless
Ya might consider a jack leg, ( like the stabilizer or out rigger on large tow trucks ). that will fit on either side of the truck so when your deploying the hoist you can support the bed.
I’m guessing those matco bits were replaced with some cheap knockoff bits. I’m not one to use the high end tool truck bits but I did splurge on some Walter drill bits and they work great. They also hold a cutting edge after drilling many holes
Hair is looking gloooorious!
Right. That stuff is actually working!
Came to say this
Outriggers would be a safety item to keep you from tipping the truck over! All the big boys have them!!
That will be absurdly easy. Just weld a strong hoop onto the passenger side bed side.
Drop the side, and have Tucker stand on the hoop,and hold onto the headache rack!
World's smallest off road rotator rollback
An extended RV stabilizer jack on the should do the job
When drilling thicker plate make a pilot hole first it’ll save your bit, time, and energy. Really enjoyed the content keep it up!
Also, anything over a 6mm (1/4") has to be run on speed 1 on a hand drill.
I spent years burning out 10mm drill bits before I realised.
This 👆
And maybe upgrade from a harbor freight drill to something with a chuck that works, haha
You guys should get Rudy to build you an outrigger for stability when picking with the crane
Are airbags another option since you're beefing up electrical? 👽🗿👽
Really need a full sized truck. 😉
The Hair still throws me off. Years of watching Bald guys. Looking great , and i love the channel.
Dang! Y’all’s hair is looking GREAT!
When I grow up I want to be a kid
You guys are having so much fun.
I haven't seen Tucker in a long while ! Wonder where you went. You're on Rudy's channel now. Awesome.😊
Rudy knocked it out of the park! Now you need portals, 4-link, 31" tires on a Samurai axle. Oh, and a pint sized super charger.
Use the AMR500
Strongest guy in the crew is slinging the camera when it comes time to shoving things around the shop! HaHa
Dear Trevor,
Thank you for handing him the cutting oil. You are a god send and the hero of all man kind.
Gotta hand it to you guys. You know how to pick a top notch fabricator. Nice work Rudy.
👍🏼👍🏼
I think i'd add some outriggers to keep the truck from tilting when using the crane. You could probably use some camper lift jacks, or just some tubes that slide inside each other that can rotate up out of the way when not needed
Holy crap. I was wondering where you went!!! Missed ya on MORR
Every time Trevor talks, all I hear is!🙇🏻♂️ hair we go!!!
Soon As Snow Melts Off the Rubicon Trail Bring it Here We can Assist you in the Getting Thru the Trail as far as you can Make it. Keep up the Fun Guys its Fun To watch your Shenanigans !
Look at all that hair!!! ❤❤❤
Love the channel, real class and the transplanting looks like it took off! Cheers!
that is awesome put a jack stand under before using the boom great video
Very nice. I think you should paint the new diamond plate bed with some bed liner.
You guys are the modern day Three Musketeers... that looks like a really
fun vehicle with a little more Work. I watched Rudy and Zack working
on your Rig. He is a Very Talented Guy for sure.. Trevor, I met you with
The Moor Crew in Pigeon Forge a few years ago.. Jeep Invasion there
Is enormous.. You fellows be careful out there ...
MWP Cosby Tn.
Trevor trying to talk at times, makes me giggle.
Slow down the drill when you’re drilling steel. The high speed will over heat the bit and destroy the temper. That softens the edge and ruins the bit.
This.. low rpm and steady pressure for drilling steel.
It’s amazing ! Been looking at FabRats issues with their roll back and wishing they would look at this. That being said, with the magic of video, I don’t even know if your two projects are concurrent, or if the engineering can scaled up. But either way well done Rudy and team ❤
The hair transplants are really looking good!
❤ to see the 30-45min vids can’t wait to see the micro roll back out at Moab or Rubicon Trail ☺️😉
Yay, another misadventure adventure
Love your guys vibes does you all do good together it wouldn't be what it is without any one of you 3you guys are so funnny
How have I missed this channel existed 😮😮😮
Glad you found us!
I love that little truck! It is going to be awesome to see it put to work. I wonder how many Groms it can hold?
Hi Trevor , just subscribed a few days go after learning what happened to you. Looks like your investigating hair replacement worked for you HappyTimes You must have the cleanest workshop in the industry. Best of luck in your new adventure, Cliff Please Stay Healthy
Adding locks to the bed will help address the twisting when using the crane. Fun build!
Good idea
Looking good..nice seeing you guys again...Rudy to the rescue
Hi I have been watching your new show you really do a great job I will always praying 🙏 for you 🙏 so you will be safe ok 🙏 and please be careful out there ok 🙏 you have a wonderful day and have a good night and day ok love Lorilee xoxoxoxox 🙏
I have suggested to Matt for year (s) an off road rollback. Say F-350 crew, longbed, SRW. Convert to reg cab, put 14’ *or longer* rollback deck over 6 wheel drive. There was? A kit for adding a 2nd rear drive axle. With Matt’s crew ability. It should be easy. Make it to recover side by sides, and most Jeeps, SUV, vans damaged off road. Heck both rear axle steer if he wants.
You should drill a pilot hole with a smaller diameter drill bit, like a 3/16” then step up to a larger bit. You might want to get Rudy to weld a brace from the upper portion of the crane across to the lower left side of the headache rack. Your extendable boom should also be marked for maximum acceptable load at each extension point.
The mini rollback is looking good ! 👍
You could weld on some pockets in the front and rear bumpers to slide in manual out riggers to help with the hoist.
Those stepper bits are awesome, never have a problem drilling anything with mine
You need a retractable stabilizing leg for when you use the mini crane (for no tippy over).
You guys are like gazillionaires. Break your jeep and call in the spare jeep.. lol.. thanks for sharing.
love this trio, love this channel.
Please restock misadventure tees.
Your hair is gonna look amazing at month 12 if it's growing this well at 4!
That's so cute!
That is cool as! Can’t wait to see the misadventures ahead
This is a wonderful project!
Glad to see you confident with hair
Gotta love those cordless drills and their auto releasing of the bit when the trigger is released!
😆
Hair is looking great guys. I love your Channel
Trevor, I totally get the "R-W Dyslexia"
It's awesome!! And Trevor... it seriously looks like you have more hair!!!
Hair is coming in good!
Recommend battery mounting on the opposite side of the crain
It was good to see George in this video. I can totally feel his pain on the Several hundred dollar bits only to have the 12 dollar ones get the job done! lol
On my mini truck I added sumo springs to the back, they are urethane bump stop.. They are awesome and if installed right they dont stiffen up the ride like adding an extra leaf will do. I can carry 2000 lbs in there with no problems. Keep up the good work.
Oh sweet, thanks for the tip
Pretty sweet ride Trevor!!
Can’t wait to see that bad boy put to work. Great job
Great video guys!! The hair is coming in beautifully on George and Trevor.
Thanks!
The Rollback is coming on nicely, Jon UK
Trevor, your hair is looking good!
DEADLY DAIHATSU Savage build
Someone needs to tell Paul from fabrats to look into that design for his rollback project then he could have his cake and eat it too
Nice rig,
Be careful you guys,
Especially Tucker,
He's probably half to be the counter weight for that crane in the field,
Off camber slopes is see in your future. ❤🎉
Whole project... Grabber green and hotrod purple...
George, "Twelve bucks!" LOL!
Yeah, prolly need some outriggers on that mini wrecker. Cool truck though.
Enhorabuena! Os está volviendo a crecer el cabello. 😁😉
Rudy did awesome on that truck. In Robby's defense, those bits will last forever... sitting in the toolbox, never being used. Jk 😅
good to see ya trevor, from gta lol
What a wonderful wideo. Good wook.
Way to go Rudy!
So Trevor's hair transplant worked pretty well! Looking sharp, boss.
I’d add a little outrigger, then you’ll have a mini rotator wrecker!!!
Entertaining as always 👍
If the crane is staying orange, then maybe orange bumpers?
Looks like the mini rollback isn’t the only thing back…nice hair! 🤙🏼
The hair is growing in nicely
You know why I'm here. 4:29 for my RUUUUDY fix.
You say you want to know what color to paint the Bumper. You need to come up with A color that represents your channel. If it's OD green then you need to paint it OD green in the front, back and the side panels. I think OD Green would be great..
Good luck and God Bless
Ya might consider a jack leg, ( like the stabilizer or out rigger on large tow trucks ). that will fit on either side of the truck so when your deploying the hoist you can support the bed.
I’m voting, paint the bumper black.
That looks like a fun rig now
Needs a mini outrigger now 😁
Carry a set of jack stands with a flat bottom welded on them
So Much Fun! 😀❤️
Hows the hair coming, do you need an additional follow up or is it all good, its look fantastic!
Rudy dun did his thang 👍🏼
Full results take about a year but so far so good
Need some outrigger for when using the crane to stabilize it better
👍🏽👍🏽
🙋🏼♂️ fuzzy Trever 🧔🏻♂️
Got some badass hair going on 👍
Trev, whats that stuff on the top of your head! Looks great man.
I’m guessing those matco bits were replaced with some cheap knockoff bits. I’m not one to use the high end tool truck bits but I did splurge on some Walter drill bits and they work great. They also hold a cutting edge after drilling many holes
PURPLE PAINT IT PURPLE
If you don't want your bits to fall out of your drill, tighten it all the way, then loosen it ONE click.
Hair is looooooking good
7:45 drill a pilot hole and time the difference and examine for wear and damage after.
Correct the winch from the rollback to jeep connection pulling angle.
100% had no faith in the boom!!! Way to to Rudy.
Looks good and just needs a touch of finishing work. Works GREAT though
If you plan on loading from the side you should you should figure out some stability legs.
You should add onboard air. Air down to Offroad, but air up if you are going to winch up heavy loads.