thanks for the video !!! can you tell me if this only works with hibernation? If its fully off it will not work? Sometimes on any desk it shows that the client is off but the pc its actually on and running, idk how to fix that
@@Dz0n1213 this video is 50/50 Guy phone and PC was connected to same router i think. he made general setting. But if I will be using 4G this will not work need more deep settings
Cool. This should also work if you try to power up from an anydesk client outside your network (i.e. external) but only if at least one device (your phone) is still connected to the local network (i.e. in your house/apartment). Did you try this out?
@@Dz0n1213 a ipad would be working aswell right? And i tested it just the normal way with wlan but it didn't even boot up idk why but i got the normal wol to work so idk
Hey bro, what's the Anydesk version are you using? Looks this is an old one.
3 года назад+2
It didn't work on my system. It only works with local network. I need to run it with mobile network. What should I do? If I turn on wifi on my phone it works, it doesn't work with mobile network.
the option to enable wake on lan and power management option are not visible to me for Ethernet, but all these option are available for wifi adaptor. i have enable wake on lan in bias.
this worked for me only on same local network. I need the same operation with different network through internet from different location. Eg. i need to remotely wake up my office system.
if power goes off, you have an option on the BIOS to restore previous state (depending if it was off or on) or turn it back on after power loss, its in pwr management
But did you know "Hibernate Mode" damage SSD disk system? Windows 10 strictly recommended that "if you use SSD don't use Hibernate Mode. Then how we do is without "Hibernate Mode"? Thanks for the video
hey this works even if the pc i want to wake up isnt on the power?or it has to be on the power? i mean if the power falls of? i can wake it up only if its on the internet?
@@enkmarketing8947 do i need old version on my phon too cuz i enabled it on pc but its still not working i press power on on my phon but my pc doesnt start
![This is how I can remotely power on my computer [Wake on LAN]](http://i.ytimg.com/vi/qOliLFUXPrI/mqdefault.jpg)
![This is how I can remotely power on my computer [Wake on LAN]](/img/tr.png)
Thanks for the clarification but your music distorted the concentration. Try next time to use meditated one. This is not war my good friend.
hahahaha yah me too my eyes followd the music from left to right hahahaa
Just turn it off
Muted instantly
It's just perfect. Thank you. There is no need for the hibernate option. That's what I wanted.
thanks for the video !!!
can you tell me if this only works with hibernation? If its fully off it will not work? Sometimes on any desk it shows that the client is off but the pc its actually on and running, idk how to fix that
Ah yes, always refreshing the desktop for no apparent reason. 😂😂
Shii got me everytime fr tho🤣🤣🤣
Thx now when i come from school and my moms tells me all stuff my pc is already booted up xd
I had followed all that steps which you have shown in video, but then also its not working.......so any idea or any help you can do for me ??
Did you do enable wake on lan correctly in BIOS?
@@Dz0n1213 this video is 50/50
Guy phone and PC was connected to same router i think. he made general setting. But if I will be using 4G this will not work need more deep settings
Its not working if i am not in the same wifi network On the lan cable is the same please help
Same problem, any help sir?
Same here
the WoL settings on Anydesk are grey'd out. I do however have a button to unlock it but all it does is open a copy of the same window
you need to pay the license
@@VamberFR it was a payed license at the time of that inquiry
Cool. This should also work if you try to power up from an anydesk client outside your network (i.e. external) but only if at least one device (your phone) is still connected to the local network (i.e. in your house/apartment). Did you try this out?
I want to try this but i don't have any old phone at my home ;-;
does it have to be my phone or just an old device which just lies around
@@4_Shinu you need a phone where you can install Anydesk, it has to be touch mobile
@@Dz0n1213 a ipad would be working aswell right? And i tested it just the normal way with wlan but it didn't even boot up idk why but i got the normal wol to work so idk
It doesn't work because 2nd phone will have different id
It's possibile with shut down option for te pc?
can you this when your desktop is using a wifi connection?
Hey bro, what's the Anydesk version are you using? Looks this is an old one.
It didn't work on my system. It only works with local network. I need to run it with mobile network. What should I do? If I turn on wifi on my phone it works, it doesn't work with mobile network.
It's because both have to be connected through the same source. Mobile network os a different connection to the wi-fi that the computer is connected.
the option to enable wake on lan and power management option are not visible to me for Ethernet, but all these option are available for wifi adaptor. i have enable wake on lan in bias.
does this work if the computer is fully shutdown? not just hibernating?
I shut down fully and it didn’t work
this worked for me only on same local network. I need the same operation with different network through internet from different location. Eg. i need to remotely wake up my office system.
did you find a solution?
@@mikebiff no
Earlier it was working well but from the last few months it's started giving me the error no device found for wake on lan.
Can anyone assist me.
Very good. Thank you brother!
Operating mode for wake on lan in anydesk is grayed out and set to disabled. How can I enable it?
Me to
My laptop don't have UEFI firmware, can I use this feature with legacy
this only works on wifi or over 4g/lte too ?
what if electricity goes and back again. Then does it work? And also if im outside (far away home but want to control my pc) can i power up?
Same question, Kindly answer it Smart Tech Manish
thank you..
if power goes off, you have an option on the BIOS to restore previous state (depending if it was off or on) or turn it back on after power loss, its in pwr management
Omg thx for 3d music
how to do with WAN (over internet not in LAN)
thanks , great detailed tutorial
But it doesn't work when pc off directly
Smart Manish 🔥
But did you know "Hibernate Mode" damage SSD disk system? Windows 10 strictly recommended that "if you use SSD don't use Hibernate Mode. Then how we do is without "Hibernate Mode"? Thanks for the video
Hey bro, I have a SSD and a Hibernation mode activated, and all is ok for 3 years
Hibernation mode was not recommended for mechanical drives ..to reduce excessive wear and tear ... however this is not applicable to SSDs.
It's need mobile and pc same wifi connection?
Is there someone behind the scenes turned on the computer with the power button?)
hey this works even if the pc i want to wake up isnt on the power?or it has to be on the power? i mean if the power falls of? i can wake it up only if its on the internet?
I've got the same question
I don't see a "power management" tab in my network settings.
Can i do this without Ethernet cable, with wifi
My wake on lan option is not locking in anydesk
please show me at minutes 2.16 what ID that?
Can you do this with scripts without apps?
Can we turn on pc with different network?
Nice Thank you very helpful
CANT find wake on lan in bios
Qualcomm Atheros QCA9377: i cant see "wake on magic packet" in advanced tab 😔
does it work if we are using free anydesk?
Only work with the payable version of anydesk
I did not find those settings I did find advance but I did not find those LAN features
I don't have the Wake-On-Lan options to enabled on Anydesk. Your license does not allow this feature
I think that they have made it only for premium license (you have to pay for it)
@@dark_master7224 It's working with old versions (download version 7.0 )
@@enkmarketing8947 do i need old version on my phon too cuz i enabled it on pc but its still not working i press power on on my phon but my pc doesnt start
thanks bro it worked..
thanks for your information 🙂🙂🙂
thanks mate... its work dude
Good
are you testing my headset?
Thanks for all
Спасибо за видео
Но нового русского пирата я так и не дождался
Bro mere bios me wake up ka option nhi de rha
1:09 LIKE FOR DUBSTEP
Interesting
Are you also able to remotely turn off your pc?
You can create a .bat file for shutdowning your pc
lol how you know ur ID before installing it , also how the Desktop shows up there with no setup !!! no ID , no setting. and that music....
My laptop it not work 😞
does it work with wifi?
very nice thank u
Good 👌
Not working on surface laptop 4
TOP!!! Muito boa a sua dica, parabéns Brow
AMAZING MAESTRO
Kalo windows 7 bagai mana settingnya?
05/05/2022 worked like a charm
What is the name of the music in this video?
Dubstep sth
Super duper
Its not working bro
Too much complicated for me 😄
Helpful
turn it on from SHUTDOWN not hybernate or whatever u call it. 🤦
👌👏👏
thank u
The big thanks
Cool 👍
Thx
tenxs
👍
Thanks!
Não deu aqui
Not working
is not working for usb wifi adapter..
Lose the noise
Plz. Off the Music.
Como consigo a id do celular? às 2:36
é só baixar o app do anydesk no celular também. ele aparece lá
٤.٢٩
@RoxyTXT it was a payed license at the time of my enquiry