Bambu Lab 3D Printers - TIPS & TRICKS
HTML-код
- Опубликовано: 6 фев 2025
- Hi guys 🙂
Since Bambu Lab's 3D printers hit the market, they gathered the attention of the 3D printer community.
In our channel, you can find many videos about these machines and, now, we decided to make a series of videos with several tips and tricks.
In this first video, we will talk about the "Filament Backup Feature".
Stay tuned for the next TIPS & TRICKS 😉
♦ You can find the Bambu Lab´s 3D Printers here (Not Affiliate Link)⤵
eu.store.bambu...
♦ STL Model⤵
cults3d.com/en...
🔶🔶🔶 If you like our work and want to help the channel, you can contribute using one of the following...
🔶 PATREON:
/ ruiraptor
🔶 PAYPAL:
Use our email to send your donation ( ruiraptor.channel@gmail.com )
🔶 You can also help by using our Banggood affiliate links posted below (costs you nothing and you are contributing to the channel):
You don't have to buy the item from the link. If you click on them and then buy whatever you are looking for works!
♦ Ender 3 V2
pt.banggood.co...
♦ Creality Ender 3
pt.banggood.co...
♦ Creality Ender 3 Pro
pt.banggood.co...
♦ Creality Ender 5
pt.banggood.co...
♦ Creality Ender 5 Pro
pt.banggood.co...
♦ Creality Ender 5 Plus
pt.banggood.co...
♦ Creality Ender 3 Max
pt.banggood.co...
♦ SKR Mini V2.0:
pt.banggood.co...
♦ Artillery Hornet
pt.banggood.co...
♦ Artillery Sidewinder X1
pt.banggood.co...
♦ Artillery Genius
pt.banggood.co...
♦ Creality CR6
pt.banggood.co...
Thank you so much for your support :)
🔶FOLLOW US ON SOCIAL MEDIA:
♦ / ruiraptor
♦ / ruiraptor
♦ / ruiraptor
Music by RUclips Library:
Six Seasons - Unicorn Heads
#3DPrinting #BambuLab #FilamentBackup
Seems I never stop learning more things about my P1S. Great vid and great info. Thanks!
I heard this only works on the x1 carbon, did it work on your p1s too?
That is the first thing I enabled on mine when I set up the AMS unit. It's great to see that Bambu Lab has finally helped the printing community out.
I just got my bamboo labs p1p today, and I absolutely fell in love with it and thank you again for the tutorial video. It helped out a lot setting it up. 😊
Got mine about a month or so ago.... and same thing man, same thing. After coming from an Ender 3 Pro, to an Ender 3 S1 Pro, and now the P1P..... it's SOOOO NICE being able to basically throw ANY stl at it, and it'll print it perfectly with a slim chance of any sort of failure. Ordered the AMS a little while back, too, which should be here next week. Debating if i want to attempt taking it apart and replacing all the PTFE tube with Capricorn tubes in hopes that MAYBE TPU would be usable in it? *shrug*
@@theElemDragon 🧑🏿🦲
I thought I had this built in, but I didn't know how to use it. Now that I do, I can use some old filament much more efficiently! Thank you very much.
Nice job. Keep it up 🎉 and really thumbs up 😎
Thank You was looking for exactly how do do this on my P1S!
Great information.. this kind of reviews / guides are what the community needs.
You guys are doing a job 👍
Thanks 😉
Thanks!
1.5x speed. You're welcome.
Still... Too.... Slow......
🍻 thanks for sharing! Is too helpful!
Holy crap I remember watching one of your videos like 5 years ago from the intro logo :D Tevo Tarantula was the subject then haha, cheers!
Awesome information! Thanks for sharing this. Probably would be good to lightly tape the end of that filament, just enough to keep it on there, but not enough to keep it from being pulled free.
Hi Mike, yes, that is an alternative solution. Thanks for sharing.
playback speed 2x is perfect
Very Very Cool. Thank you.
Thanks for the video... I had previously read about this feature and tried it on my AMS, but it didn't automatically take the other filament with the same settings. I have an early Kickstarter unit, so I am wondering if that might be it...
Hi JTWorks, did you update the firmware of your AMS unit and printer? The first AMS units sent for reviewers do not allow firmware upgrades and if this is the case, then it will not work.
Check if your AMS and printer has the latest firmware installed and also the Studio slicer and the feature enabled. With all these it would to work.
Great advice, thank you.
I had green in slot 2 and 3, but the ams switched to black in slot 1 after it ran out in slot 2. Very confused. All bambulab filament and the two greens were the same color. WTH? I’m just going to turn it off for now.
to anyone, any clarification is appreciated. WHAT HAPPENS to that tail piece from the empty roll? does that feed through to the nozzle, and use up ALL that "empty roll" filament, and then parks the head, starts feeding in the BACKUP roll, etc? does the BACKUP filament feed in ok, behind the "empty roll" tail end, and travel in the bowden tube ok? i've not seen any video that really shows this part of the step. Ruiraptor's video is great, but any clarification is appreciated
Yes, to my understanding it will extrude the first role until completely empty then load the second to print.
No need to push the tail of the roll because the Bambu has a direct extruder head.
Skip to 2:33 -_-
one spool looks like from Pm is it true in 1 kg or smaller thanks
Hi, yes, the middle one it´s from Filament PM. This spool has 0,5Kg.
Are your Bambus rattling (noise) too? Esspecially on sport and ludicrous mode?
Not sure what exactly is the sound you are referring to, but when using fast accelerations the machine makes more mechanical noise.
I read alot about grid infill cause that scratching Sound
"In my experience, there is only one motivation, and that is desire. No reasons or principle contain it or stand against it." ---Jane Smiley
💕👍
00:25 - Hers????? its not a DishwasHER :D
I hate when my filament rans out.
Could we have a tiny circuit board made to pick up the filament poop signal which will operate a door at the poop shoot and send the 4 different color poops to 4 different locations
This will make 4 different piles of poop, each a different color and make recycling the poop a breeze!!!