Have you tried Rupes UHS Compound? For me it is right up there with Cut Max, and Cut Max is my favorite compound also. The Rupes UHS paired with the Rupes UHS pad or other Heavy Cutting foam pads finishes down very nicely. For hard clear the UHS is by far the best compound in my experience because it is able to remove defects quickly and leaves a very nice finish. Have not been able to find any other compound that compares in that regard on hard clear. If you aren't able to fit it in on the compound series I highly recommend you give it a shot anyway! Has saved me a lot of time and money on jobs.
Hi Brain, just off the topic here, you did a video on Carpro hydro2foam i want to know can you top that with Carpro Reload or Bead maker for more protection or will it not really make any difference?
I've had a chance to use both M110 & M210 on my black test hood. They are the most user friendly compound and polish I've ever used. No dusting and wipe-off is awesome. Not oily messes that smear and require a lot of buffing like others. They both don't have the best cut or finish that I've ever used, but still good.
I know you have probably covered it somewhere.... But in your opinion what does the best job of a 1 step correction in situations where you have a client who doesnt want to pay a ton for correction but you wan lt to get the best compound and polish look in 1 shot..... And what are the pros and cons....thanks.
I listen to an interview from meguiars reps he said that the new polishes were designed for detailers not body shop look great it’s 2019 almost you can’t have dust and it needs to be easy wipe of. Looking like they got it right just ordered thanks for video
Good to know Brian, thanks for bringing that up, you do a good job replying to comments and with so many videos, knowing to comment on a new video about an old video is great information for fans and subscribers 👍🏻
used on my black tesla 3 and it worked pretty good. It got the swirls out from hertz car washes. The only think left is some longe scratches but hard to see. It took me almost 6 hours from bar to m210. Im only going to do this once a year.
I've compared M110 to Jescar, Fast Correcting Cream and Oberk Compound on my black test hood. M110 provides a nice lubricated buffing cycle. It's less oily than the others I mentioned, which makes wiping off a breeze. No dust with M110. I found Jescar, Fast Correcting Cream, and Oberk compounds to finish noticeabely better on my test hood with a MF pad. M110 is a pleasure to work with. If it finished like the others, it would be the only compound I need.
What was your process when using the 110? Technique for the finishing step with 110 plays a huge roll. In our testing, this finished LSP ready more often then not when technique was dialed in. - Markus, Meguiar's Pro Product Manager
On hard paint .. it finishes just fine with a microfiber. On softer paints. You can switch to a white foam pad and finish ... still using 110. On soft as butter clear, it is time to grab 210. I am loving it the more I use it!👍🏻😁
Brewinz I find that slowing down machine speed tends to help quite a bit with improving finish. On more sensitive paints, doing cutting at speed 3-4 and then stopping mid cycle and blowing out the pad, adding two tiny drops and then doing a couple passes at speed 1.5-2 seems to finish out like a dream. I also find that both 110 and 210 tend to prefer denser and firm foams as they do a better job of pushing the abrasives into the paint. Hopefully that helps.
This one has been revealed to be the heaviest cutter of the the ones you've reviewed that I have. I was not at all expecting that. Especially surprised it out cut ACA500. That one has been my sledge hammer for the past year.
Glad you liked it. I personally never got along with 105 and I picked this up on pre-order along with 210 but haven't had a chance to try it. It's nice to see you and other more experienced people's opinions on products. Was hoping this would be positive lol. Been looking at the bottle unable to use it yet.
I really love Meguiar's products, my top 3 detailing product manufacturers in no particular order are Meguiar's, SONAX, and 3D. Great video as usual Brian.
I always jump on new products that are coming out but I have to keep good stock on my meguiars, between 3M and Meguiars that was the top shit to use back in the early 2000's and I guess it's just the seat time I have with meguiars so I always catch myself going to it when I get in a bind.
Wow I have the same wool pad and rotary and was going very fast becuase I was scared that I might burn the clear. But wow that is super slow amazing! Ive been using the rotary on almost all my jobs now! Love it..
What timing! I literally just got a quart of this from Autogeek with my latest re-stock purchase. It does look like Meg's finally fixed their compound! I've ran gallons of 100. The reason I quit buying the 100 is that you need so damn much of it to do the job, it could be quite fickle depending on the weather, and dusted like crazy. Thanks to your great videos I've changed my products to the higher end (Sonax/Jescar/Menzerna). Who knows, I might just fall back in love with Meg's.
Brian, just a thought here, but for a final comparison here in this series could you do a PRICE PER OZ. listing of all of the compounds in a similar consumer size range. This would give an easy comparison of value/rank on podium. We are all watching our bottom line as professionals. Very impressed with M110 I have stepped away from Megs compounds and polishes but as I saw this at SEMA I so thought " can't wait for Brian to test this "
M105 was my go to compound, but I hated it because it was hard to wipe off and it dusted like crazy. But I had no other choice, so I stuck with it. I just bought the M110 because it seems like it solves most of the issues with M105. Is M110 more aggressive?
I have wizards and mequiars. I think the wizards is better but I wouldn’t shy away from the m110 by any stretch of imagination! I think comparing the 2 is so close it’s unreal but the wizards does have a little bit of an advantage 💪💪💪 either way both are GREAT GREAT products
Is it ok to use lc ccs foam pads with this? I’m a little behind and haven’t tried mf pads yet. Still using a flex 3401 and a cyclo dual wheel polisher. I really enjoy your channel!!
Hi, In a video made by Autogeek the fellow from Meguiar said with the M110 &M 210 the only pad you should use are microfiber pads. Do you think it will change the result of your test. On the sand scratch you use a foam pad. Sorry to disturb you with that question but I am realy a beginner. Should I stay with Griot's fast correcting cream or should I move to Meguiar's. In Canada it is not to easy to find all the product we need. Thank you.
Hey Brian! What was the reason you used the long throw on the Subaru to cut instead of the rotary? How often do you find yourself going to a DA for cutting as opposed to the rotary?
According to independent tests Koch Chemie H8, Mothers Heavy Duty Rubbing Compound, Meguiars M101, Rupes Mille Coarse Compound and 3D ACA 500 all cut more than M110
Wait…why would you wet sand after this compound VS polishing with either the M210 or M205? Please explain, I’m a bit confused, as I’m about to use this system on both of my vehicles. Thanks!
is it a wool pad where a microfiber pad? .. when do you think it really is better than M105 ultra cut compound where M101 foam cut compound ?. I love M105, but will I have to exchange it for M110? thank you in advance
Similar cut, maybe even a measure more. Almost no dust at all. Super easy wipe off. Way more refined user experience. It feels like it is made using higher quality ingredients.
I wonder if ...after doing the final test on the 800-100 grit marks..what would happen the the same mark using the rotary???? same as the dual action???
Can you do me a favor and check out the Sweet Project Cars channel on youtube. He has a video just published a couple days ago, where he claims to be able to remove all 180 grit sand scratches from clear coat with nothing more than a rotary polisher and mothers metal polish. I said its not possible. Your thoughts? Maybe you have a spare test panel where you can test mothers vs other actual buffing/rubbing compounds?
The reflection of IGL really shows in the reflection and because of that....thoughts on their Ecocoat Premier? I just bought some and wanted to hear your thoughts, thanks! THIS review brought THAT question, imagine that😋
@@klasseact6663 please have her message me on there either under my business name, or Travis Lacey with this same profile pic. I have a video and pics I can show you of what Premier did after just one WET application and no washes until 5 months later! The results were shocking!
Detailedimage.com price is more than 28 but less that autogeek on everything they sell too. But they always have a coupon deal going on so wait for that for either Meg's or a site wide thing.
He's using the Lake Country low lint wool for actual correction I believe. Available on autogeek in a couple sizes for sure, but you can probably get them other places as well. On the red test panel with the sanding marks, I think he was just using a standard orange foam cutting pad. Can't recall the brand but it's been the same throughout the series to limit variables.
What is the rotary machine used in this video? I’m looking to use this compound for my little entrepreneur projects at home and I tested it out and it doesn’t work as I planned, either it’s my buffer, user error, or I’m just not buffing correctly, ps I’m new to detailing
A few more to go before the big showdown with the top 3....plus Wizards!!😃
Have you tried Rupes UHS Compound? For me it is right up there with Cut Max, and Cut Max is my favorite compound also. The Rupes UHS paired with the Rupes UHS pad or other Heavy Cutting foam pads finishes down very nicely. For hard clear the UHS is by far the best compound in my experience because it is able to remove defects quickly and leaves a very nice finish. Have not been able to find any other compound that compares in that regard on hard clear. If you aren't able to fit it in on the compound series I highly recommend you give it a shot anyway! Has saved me a lot of time and money on jobs.
Hi Brain, just off the topic here, you did a video on Carpro hydro2foam i want to know can you top that with Carpro Reload or Bead maker for more protection or will it not really make any difference?
UHS compound is coming along with ACA 500....stay tuned.
Christo... yes you can.👍🏻
Oh so close!
I've had a chance to use both M110 & M210 on my black test hood. They are the most user friendly compound and polish I've ever used. No dusting and wipe-off is awesome. Not oily messes that smear and require a lot of buffing like others. They both don't have the best cut or finish that I've ever used, but still good.
Nice to see a professional showcasing this...I approve 😁👍🏻
Loops And Threads thanks!
Thanks for taking the time! The review for this have sucked! Until now!
Well Iam glad you approve!😁👍🏻
Yes! Been waiting for this to get in the hands of someone who actually knows what the hell to do with it! Great review....finally!
Glad these vids help a bit.
@@apexdetail85 these are literally my favorite videos as far as detailing goes. Love seeing the sanding marks results!
Ive been dying for SOMEONE on youtube to review this product
I know you have probably covered it somewhere.... But in your opinion what does the best job of a 1 step correction in situations where you have a client who doesnt want to pay a ton for correction but you wan lt to get the best compound and polish look in 1 shot..... And what are the pros and cons....thanks.
@@John-oy7ig griots finishing sealent is incredible goes after really good defects and one step sealent
It depends on what you are looking to do 'after' the one step. Wax, sealant, coating...
John....for that, go with 3D ONE.
Got to hand it to Megs, they remain responsive to the market long after most people in Barry's position put it on cruise control.
BigOldDog very true... I agree.👍🏻
Excellent Brian, really looking forward to the grand compound finale. Nice to see M110 shaking it up and well done again for producing this video...
Vince Hughes a few more to go... then the finale.
The REVIEW we've all been Waiting for!!!! Hell YEAH 👍👍👍👍
David Saucedo Cheers!
I listen to an interview from meguiars reps he said that the new polishes were designed for detailers not body shop look great it’s 2019 almost you can’t have dust and it needs to be easy wipe of. Looking like they got it right just ordered thanks for video
They did, and its about time! 😁
Good to know Brian, thanks for bringing that up, you do a good job replying to comments and with so many videos, knowing to comment on a new video about an old video is great information for fans and subscribers 👍🏻
I dont want to miss any questions. But 550 plus videos are too many to go thru.
used on my black tesla 3 and it worked pretty good. It got the swirls out from hertz car washes. The only think left is some longe scratches but hard to see. It took me almost 6 hours from bar to m210. Im only going to do this once a year.
Great honest informative video Brian.
Always looking forward to the next one, keep the good work up.
Thank you Shaun...Much more to come!
Well I'm glad I purchased this and the 210. Going to be learning how to sand and polish
I've compared M110 to Jescar, Fast Correcting Cream and Oberk Compound on my black test hood. M110 provides a nice lubricated buffing cycle. It's less oily than the others I mentioned, which makes wiping off a breeze. No dust with M110. I found Jescar, Fast Correcting Cream, and Oberk compounds to finish noticeabely better on my test hood with a MF pad. M110 is a pleasure to work with. If it finished like the others, it would be the only compound I need.
Brewinz agreed... right there with CarPro, Wizards and Americana Global 1500 as well.
What was your process when using the 110? Technique for the finishing step with 110 plays a huge roll. In our testing, this finished LSP ready more often then not when technique was dialed in. - Markus, Meguiar's Pro Product Manager
On hard paint .. it finishes just fine with a microfiber. On softer paints. You can switch to a white foam pad and finish ... still using 110. On soft as butter clear, it is time to grab 210. I am loving it the more I use it!👍🏻😁
@@MarkusKleis what technique do you find finishes best with 110? Generally speaking.
Brewinz I find that slowing down machine speed tends to help quite a bit with improving finish. On more sensitive paints, doing cutting at speed 3-4 and then stopping mid cycle and blowing out the pad, adding two tiny drops and then doing a couple passes at speed 1.5-2 seems to finish out like a dream. I also find that both 110 and 210 tend to prefer denser and firm foams as they do a better job of pushing the abrasives into the paint. Hopefully that helps.
This one has been revealed to be the heaviest cutter of the the ones you've reviewed that I have. I was not at all expecting that.
Especially surprised it out cut ACA500. That one has been my sledge hammer for the past year.
Sweet!!! Been waiting for this!!!! Thanks!!!
Congrats on the first comprehensive video review on m110!!!
Hey, my pleasure..it feels good to do a positive review on Megs compounds.
Glad you liked it. I personally never got along with 105 and I picked this up on pre-order along with 210 but haven't had a chance to try it.
It's nice to see you and other more experienced people's opinions on products.
Was hoping this would be positive lol. Been looking at the bottle unable to use it yet.
I really love Meguiar's products, my top 3 detailing product manufacturers in no particular order are Meguiar's, SONAX, and 3D. Great video as usual Brian.
I cant find a thing to argue with that.👍
I always jump on new products that are coming out but I have to keep good stock on my meguiars, between 3M and Meguiars that was the top shit to use back in the early 2000's and I guess it's just the seat time I have with meguiars so I always catch myself going to it when I get in a bind.
Great product for minor to moderate issues ✊Thanks much appreciate your time and effort 😎
Big D absolutely!👍🏻
Outstanding review. Thanks Brian for being so thorough.
My pleasure! Much more to come!
Wow I have the same wool pad and rotary and was going very fast becuase I was scared that I might burn the clear. But wow that is super slow amazing! Ive been using the rotary on almost all my jobs now! Love it..
Great review I think now it is enough testing heavy cutting compound. It is time to decide the final result.
What timing! I literally just got a quart of this from Autogeek with my latest re-stock purchase. It does look like Meg's finally fixed their compound! I've ran gallons of 100. The reason I quit buying the 100 is that you need so damn much of it to do the job, it could be quite fickle depending on the weather, and dusted like crazy. Thanks to your great videos I've changed my products to the higher end (Sonax/Jescar/Menzerna). Who knows, I might just fall back in love with Meg's.
Steve Sulkowski I have a feeling, if you try this, you will add it to your arsenal.👍🏻
And to think that a lot of us switched to M100 because M105 was so dusty!
@@danlc95 m100 was definitely an improvement on 105, but a long ways off from the top guns out there
@@MrSulkow1 - So true.
Dust is my biggest pet peeves with a compound.
Brian I think its time for another showdown, 5 years later. 💪🏼
Brian, just a thought here, but for a final comparison here in this series could you do a PRICE PER OZ. listing of all of the compounds in a similar consumer size range. This would give an easy comparison of value/rank on podium. We are all watching our bottom line as professionals. Very impressed with M110 I have stepped away from Megs compounds and polishes but as I saw this at SEMA I so thought " can't wait for Brian to test this "
I will break the compounds down a bit further in that video...including price.👍🙂
Meguiars + Flex
Perfect combo
Perfect work 🙏👌
Thanks for your time mate it’s appreciated from UK
Right back at ya! Give Jon from Forensic Detailing some love for me...Great dude!🙂
You are doing an amazing job, keep it up👍
M110 Been improved since this video has more deeper cutting power more compounding You should reset and re review on it
M105 was my go to compound, but I hated it because it was hard to wipe off and it dusted like crazy. But I had no other choice, so I stuck with it. I just bought the M110 because it seems like it solves most of the issues with M105. Is M110 more aggressive?
Very helpful review and demo. I'd like to try the product.
Did you have daylight lamps in your garage, if not show the resault outside in reay daylight.
great video again buddy. I m impressed with the performance...🍻🍻
Richard Seem surprised me as well.
Great review , is that a Home Depot tripod light ?
How do you think this M110 and the Rupes wool pad work work heavy work???
I have wizards and mequiars. I think the wizards is better but I wouldn’t shy away from the m110 by any stretch of imagination! I think comparing the 2 is so close it’s unreal but the wizards does have a little bit of an advantage 💪💪💪 either way both are GREAT GREAT products
Try using a microfiber cutting pad with it much better results 👌
Is it ok to use lc ccs foam pads with this? I’m a little behind and haven’t tried mf pads yet. Still using a flex 3401 and a cyclo dual wheel polisher. I really enjoy your channel!!
Ty vm for Sonax Cutmax
P.S. this one has cancer causing agents..... So as all other ones i guess.
Mask!!!
Would you recommend 110 and 210 over 105 and 205? Followed by a ceramic coating
Hi, In a video made by Autogeek the fellow from Meguiar said with the M110 &M 210 the only pad you should use are microfiber pads. Do you think it will change the result of your test. On the sand scratch you use a foam pad. Sorry to disturb you with that question but I am realy a beginner. Should I stay with Griot's fast correcting cream or should I move to Meguiar's. In Canada it is not to easy to find all the product we need. Thank you.
Hey Brian! What was the reason you used the long throw on the Subaru to cut instead of the rotary? How often do you find yourself going to a DA for cutting as opposed to the rotary?
What's the meaning of that lake country pre wash pad ? is the pad need to be pre wash before using ?
According to independent tests Koch Chemie H8, Mothers Heavy Duty Rubbing Compound, Meguiars M101, Rupes Mille Coarse Compound and 3D ACA 500 all cut more than M110
zubair tvbox 👎🏻 nope
Mothers... no. Rupes, junk. ACA 500 is coming up next so stay tuned. As for Koch.. they refuse to sell it here.. so I personally dont give a rip.😁
M110 out cut ACA500, Rupes DA Coarse, Jescar Correction Compound, Menzerna 400, D300, etc.
Never saw that coming.
Great review! From a fellow IGL coatings installer keep up the great work!
These videos are awesome! by the way do you have a link for your metal tables so we can check the progress so far?
Danial Daneshmand I show the table and go over it each video in the series.
great info
Thanks for the review. Will you try 3D ACA 500 Xtra cut?
A OJ ACA is coming up next.
Wait…why would you wet sand after this compound VS polishing with either the M210 or M205? Please explain, I’m a bit confused, as I’m about to use this system on both of my vehicles. Thanks!
Great video. Question... what rpm do you use when compounding vs polishing when using a random orbital polisher?
Great review thanks much
My pleasure...much more to come!
Hi Brain, quick question, Meguairs 110 or Griots FCC if I could pick only one of these types of compound?
M110 is a oil based compound yes?
Wow, got the notification and first to comment. Love ya for this!
Stephen Carbonaro yes! Much appreciated!😁👍🏻
Thanks for the info! At what speed should i stay at when cutting?
is it a wool pad where a microfiber pad? .. when do you think it really is better than M105 ultra cut compound where M101 foam cut compound ?. I love M105, but will I have to exchange it for M110? thank you in advance
Hello, thank you so much for your awesome content. I wanted to ask you how this compound compares to m100
Similar cut, maybe even a measure more. Almost no dust at all. Super easy wipe off. Way more refined user experience. It feels like it is made using higher quality ingredients.
Why you never use IPA or panel wipe to show real results?
That megs did a great job on the trashed bimmer hood. Surprising, wasn’t expecting that. I hadn’t even heard of 110.
Andres Rivera just came out... good stuff.👍🏻
Love the channel ! Thanks for allthe information! Please tell me Where can i get m110 at that price?
I "liked" this video because you didn't make it a music video. It's rare these days on RUclips.
I like the music videos when done right
Sounds like a good compound for someone starting out in paint correction then?
George EI7KO yes, would be a great compound for the beginner.👍🏻
@@apexdetail85 sounds good to me. I'll order a bottle so.
I wonder if ...after doing the final test on the 800-100 grit marks..what would happen the the same mark using the rotary???? same as the dual action???
deepsquat600 they would correct much quicker.😁
Subscribed! Cheers!!
@@apexdetail85 Sweet! Thank you :)
Foam or wool pad with rotary
Which is best for a detailer
So how does this compare to Meguiars M101 in your opinion?
Klasse Act wipes off easy but not too oily, no dust, finishes down better.
Will you try Gyeon Compound Plus for podium.And Koch chemie H8.
Onur Acararican Gyeon...yes. Koch... they will not sell it here, so... no.
should I use a cutting pad
Hey Brian, I see that you are using the D.A polisher more frequently now over the rotary any particular reason why?
Jimmy's WRX CHNL I get bored and change my routine regularly to keep it fresh.
Which machine are you using this with?
Hey man can you do a test on Soft 99 fusso coat durability
robert b absolutely!👍🏻
So it's like a m105 without the dust??
is m110 better than cut max in cut
👀Looks like Mags 👀🕵🏻♂️been watching you 🥉
254JROCK 😮👀
Can you do me a favor and check out the Sweet Project Cars channel on youtube. He has a video just published a couple days ago, where he claims to be able to remove all 180 grit sand scratches from clear coat with nothing more than a rotary polisher and mothers metal polish. I said its not possible. Your thoughts? Maybe you have a spare test panel where you can test mothers vs other actual buffing/rubbing compounds?
Are these better than M105
Amavideo sir. My question would be , how would you compare 110 to 101?
Mickey Tesnear wipes off easier with no oily residue. No dusting, finishes down better.
Is It available on Amazon yet?
www.meguiarsdirect.com/meguiars-m110-ultra-pro-speed-compound-32oz.html
Not as of yet.
Which pad do you recommend?
The reflection of IGL really shows in the reflection and because of that....thoughts on their Ecocoat Premier? I just bought some and wanted to hear your thoughts, thanks! THIS review brought THAT question, imagine that😋
Find me on Facebook and I will show you the power of Premier. You will be shocked!
@@94muddertrucker I will have my wife show it to me on Facebook as I'm that 1 guy who isn't on there.
It is phenomenal... a review is coming.
@@klasseact6663 please have her message me on there either under my business name, or Travis Lacey with this same profile pic. I have a video and pics I can show you of what Premier did after just one WET application and no washes until 5 months later! The results were shocking!
@@94muddertrucker well thank you! How did the vehicle go FIVE monthes without a wash, WOW!
Can I have the link for the wool pads please
www.autogeek.net/lc-lowlint-5inch-pad.html?productid=lc-lowlint-5inch-pad&channelid=BIZRA
32 ounces for 28.00, where? I see on AutoGeek for 48.00.
Detailedimage.com price is more than 28 but less that autogeek on everything they sell too. But they always have a coupon deal going on so wait for that for either Meg's or a site wide thing.
What kind of pad are you using?
He's using the Lake Country low lint wool for actual correction I believe. Available on autogeek in a couple sizes for sure, but you can probably get them other places as well.
On the red test panel with the sanding marks, I think he was just using a standard orange foam cutting pad. Can't recall the brand but it's been the same throughout the series to limit variables.
This👆 www.autogeek.net/lc-lowlint-6inch-pad.html?productid=lc-lowlint-6inch-pad&channelid=BIZRA
www.griotsgarage.com/product/3+inch+orange+foam+correcting+pads.do?code=PPCPLB&msclkid=44d23c54a4211195f32f6046598368de&Bing_PLA_Shopping&PLA-%20Pads%20%26%20Accessories
110 vs 105 ? Thanks
Do you typically do correction before pdr I'd think you would do it after incase you scratch the paint?
High-Def Detail no.. I meant before I lift the hood and set up the equipment.
To me if a compound leaves mooring to the point where you have to wet sand it. And recompound it. Id stay the hell away from it!!
the eabster that would be a horrible compound! 😮
Trop lent....! 60cm toutes les 5 secondes !!!!
Non tout dépend de la quantité et degrés de défauts ! Tant qu'il ne brûle pas le vernis !!
I'd rather see you do it by hand. I would imagine the majority of DYI like me do it.
I saw a Kenzo sign is it better than kamikaze ism and myibi
Yes it is. It feels silky and the beading is phenomenal! And is very easy to apply.
Much much better!😁
These are $40 now days.
Not only that, but M100 cuts and finishes just as well and is far cheaper. Yes it dusts, but it also has a far easier wipe off and works more quickly.
You need tu use more compound put more presssure body shop like real pro
😂😂
What is the rotary machine used in this video? I’m looking to use this compound for my little entrepreneur projects at home and I tested it out and it doesn’t work as I planned, either it’s my buffer, user error, or I’m just not buffing correctly, ps I’m new to detailing