Love the bottle opener idea on a friction folder. You have a real talent bro. Thanks Anthony Kent HAWK woodlore knives UK I'd be proud to own that knife and I am a knife maker. So well done 😀
Anthony Kent the customer wanted a bottle opener, but on some bottle you can't use it because the "neck" of the bottle is too short If the bottle opener was on the other side of the tang, the problem would be solved Ha ha thanks but this one is sold If you're a knifemaker, give a try to friction folders ! They're really interesting to make ☺
ScottsHobbyz thanks ! Some mystery stainless steel that a friend of mine manage to harden, he gave it to me a while ago and when I make a knife out of it I send it to him and he does the heat treat for me
Stoney327 you're right, I wear them when I'm using the angle grinder, but not with the belt grinder because I can't see anything with them But I will put them on, and maybe just use some diving gogles 😂
Gaetan Thank you. I've been making knives since 1966 and retired as a shop teacher. I'd NEVER let one of my students OR myself run shop tools without the proper safety gear. I know how easy it is to just say oh well I'll remember next time. I learned my lesson the hard way. In 1968 I ended up in the emergency room with a 12mm long piece of 10mm drill bit in my chin, it snapped off while I was running a drill press. It took the surgeon about an hour to remove it and stitch me up. I still have the scar. Every time I see it, I remember that day and that I should have been wearing a face shield. I was a machinist for a munitions factory. Fortunately they didn't fire me :~))))) God bless: Stoney
Stoney327 wow.. I haven't been really injured yet, only when I learn to use a new tool (belt that catches the finger, etc..) So no big injuries, I try to follow the safety rules 😉 I also drives me mad when I see someone using an angle grinder with the sparks throwing up, without a guard or not holding / using it properly
Gaetan You sound like a smart young man, you'll do well if you just remember to use common sense. I know my ramblings are all things that you've heard all your life, but I truly worry about people doing things without realizing the consequences. I also know that NO ONE cares UNTIL they get hurt, then (as they say ) hindsight is 20/20, but it's usually too late at that point? Stay well, keep making knives. I make 18th century period correct knives and accessories for the Black Powder shooter and reenactor. I make modern hunting knives too, but my love is the Ooooold stuff. Check out the items in my store at www.frontiermuzzleloading.com/f2-the-mountain-man-emporium God bless: Two Feathers at The Mountain Man Emporium
So important My dad is a fossils preparator and some weeks ago one of his rotary carving tools snapped, crushed the normal glasses he was wearing and after that hit only a half centimeter under his eye 😬 I'm allways wearing safety glasses for working with powertools And if you keep the glasses clean and have the right light in the shop it's no problem to wear glasses all the time :)
Merci ! Je suis bien français Oui le logo est une erreur, je n'ai aucune affiliation avec une entreprise, un ami a moi m'a donné ces vêtements pour bricoler et il faut que je découse les logo !
Good job. However why do most people think a folding knife blade has to be so thick ? They may be tough and everything, but they don't slice worth a damn.
Comment tu fais pour que tes rivets ou tes vis n'aient pas de jeu ? J'ai essayé de faire un pliant avec une fausse pièce qui fait ressort, mais comme j'ai un peu de jeu à chaque trou, même si j'y ai fais attention, ça ne fonctionne pas ☹️
@@StarCoreSE laisse tomber pour la lime, tu n'auras jamais un beau cercle concentrique. Visiblement tu n'as pas le bon diamètre en perçant, sinon il n'y aurait pas de jeu 🙂 Prends un pied à coulisse et vérifie que les diamètres sont bien exactement les mêmes entre ta vis et ton forêt 😉
It happens sometimes! I have carbide bits now, a bit oversize but for full tangs or hidden tangs it does the trick. Best is to not forget to drill before ht 😂
I hope you liked the video ! Here's a playlist where you'll see me make more folders : ruclips.net/p/PLDEtmXi-wKMmAcMiWvLLXAOnlDmiWgW1Y
Love the bottle opener idea on a friction folder. You have a real talent bro. Thanks Anthony Kent HAWK woodlore knives UK I'd be proud to own that knife and I am a knife maker. So well done 😀
Anthony Kent the customer wanted a bottle opener, but on some bottle you can't use it because the "neck" of the bottle is too short
If the bottle opener was on the other side of the tang, the problem would be solved
Ha ha thanks but this one is sold
If you're a knifemaker, give a try to friction folders ! They're really interesting to make ☺
Хороший ножик получился.
sympa le guillochage de celui là !
That is pretty good. What steel was it? Just subbed 46th sub.
ScottsHobbyz thanks ! Some mystery stainless steel that a friend of mine manage to harden, he gave it to me a while ago and when I make a knife out of it I send it to him and he does the heat treat for me
Nice!!!
Dude
Where's your safety glasses? You only get ONE set of eyes!
Stoney
Stoney327 you're right, I wear them when I'm using the angle grinder, but not with the belt grinder because I can't see anything with them
But I will put them on, and maybe just use some diving gogles 😂
Gaetan
Thank you. I've been making knives since 1966 and retired as a shop teacher. I'd NEVER let one of my students OR myself run shop tools without the proper safety gear. I know how easy it is to just say oh well I'll remember next time. I learned my lesson the hard way. In 1968 I ended up in the emergency room with a 12mm long piece of 10mm drill bit in my chin, it snapped off while I was running a drill press. It took the surgeon about an hour to remove it and stitch me up. I still have the scar. Every time I see it, I remember that day and that I should have been wearing a face shield. I was a machinist for a munitions factory. Fortunately they didn't fire me :~)))))
God bless:
Stoney
Stoney327 wow.. I haven't been really injured yet, only when I learn to use a new tool (belt that catches the finger, etc..)
So no big injuries, I try to follow the safety rules 😉
I also drives me mad when I see someone using an angle grinder with the sparks throwing up, without a guard or not holding / using it properly
Gaetan
You sound like a smart young man, you'll do well if you just remember to use common sense. I know my ramblings are all things that you've heard all your life, but I truly worry about people doing things without realizing the consequences. I also know that NO ONE cares UNTIL they get hurt, then (as they say ) hindsight is 20/20, but it's usually too late at that point? Stay well, keep making knives. I make 18th century period correct knives and accessories for the Black Powder shooter and reenactor. I make modern hunting knives too, but my love is the Ooooold stuff. Check out the items in my store at www.frontiermuzzleloading.com/f2-the-mountain-man-emporium
God bless:
Two Feathers
at The Mountain Man Emporium
So important
My dad is a fossils preparator and some weeks ago one of his rotary carving tools snapped, crushed the normal glasses he was wearing and after that hit only a half centimeter under his eye 😬
I'm allways wearing safety glasses for working with powertools
And if you keep the glasses clean and have the right light in the shop it's no problem to wear glasses all the time :)
Superbe! J'ai eu un doute sur nationalité étant donné que les noms français sont répandus outre-atlantique. Et puis j'ai vu le logo APRR :D
Merci ! Je suis bien français
Oui le logo est une erreur, je n'ai aucune affiliation avec une entreprise, un ami a moi m'a donné ces vêtements pour bricoler et il faut que je découse les logo !
Good job.
However why do most people think a folding knife blade has to be so thick ?
They may be tough and everything, but they don't slice worth a damn.
Tyler Snyder it's 4mm thick, that's what the customer wanted, and don't worry it shaves nicely ;)
You should be wearing your drilling stainless steel safety glasses, with your drilling stainless steel face, as the drill bits can shatter.
Was this u chance made in a school metal shop
No I made it in my own workshop ☺
Comment tu fais pour que tes rivets ou tes vis n'aient pas de jeu ? J'ai essayé de faire un pliant avec une fausse pièce qui fait ressort, mais comme j'ai un peu de jeu à chaque trou, même si j'y ai fais attention, ça ne fonctionne pas ☹️
Et bien il faut percer au diamètre de la vis ou du rivet, sinon il y a du jeu 😉
@@lamproknives Oui j'ai essayé ça, j'ai même essayé en perçant 1 mm de moins puis en ajustant à la lime ronde et fine, mais rien à faire.
@@StarCoreSE laisse tomber pour la lime, tu n'auras jamais un beau cercle concentrique. Visiblement tu n'as pas le bon diamètre en perçant, sinon il n'y aurait pas de jeu 🙂
Prends un pied à coulisse et vérifie que les diamètres sont bien exactement les mêmes entre ta vis et ton forêt 😉
Aku dari Indonesia, request,katana sirasaya lipat bang
Sorry I didn't understand
@@lamproknives I am request knife making model katana sirasaya japan 🙏 folded
@@abdulholik2423 I'm planning on making a tanto soon 😉
@@lamproknives thank you i am waiting for the next making🙏👍
I broken 2 bits after hardening, primári error, hehehe
It happens sometimes! I have carbide bits now, a bit oversize but for full tangs or hidden tangs it does the trick. Best is to not forget to drill before ht 😂