Friendly Tip for Zeroing - you have a ruler in your scope. With 18x you should be able to see your impacts on paper at 100y. You just need to measure in mils from your POI to your POA - in this case it was probably 2.2 mils low. So you just dial up 2.2 mils (22 clicks). No need for all the math. Happy shooting! The rifle looks dope! Good review
From what I've seen of this rifle, it's hard to look at some of the more expensive options out there. PSA catches a lot of crap by Gucci gun bros for selling firearms so cheaply, but at least with this line of rifles it really looks like PSA is better than just "good enough." And at around $1200 what's not to like?
@@HatsuneM1ku01 The Aero Precision M4e1 ($1250) and FN patrol carbines ($1350) in 5.56x45. The Sabre M110A1 is an AR-10 in either .308 or 6.5. The AERO Precision M5E1 is an fine AR-10 with 20" barrel and it is priced complete around $1800. FN SCAR is an awesome .308! But it will set you back about $4,000.
Got my billet Sabre “110A1”. Haven’t shot it yet but I’m excited especially after seeing these results. Purchased a FDE Sig Tango MSR and mounted it to complete the concept. GREAT VIDEO! Thank you
My 18 inch Armalite comp AR10 is a big fan of the Fed 168 gr SMK’s. Got about the same results. It is more than half of the PSA. Impressed again with another PSA product.
OK, I want it! This rifle looks fantastic and it's definitely an economic way to get into .308. Thanks for giving us the rundown on this compelling option! 🔥🔥🔥
Enjoyed the video. Big PSA/JJE fanboy here ... good people. I've got the 20" billetted version that I love ... with the A2 stock. Well, A1/A2 stock. It's the one thing I may change. Anyways .... FN hammer forged barrel is sub MOA for me with factory SMK 168s and especially with my handloads. Subscribed, bell rang, commented, liked, upvoted, shared .... may the algorithm gods smile favorably upon your channel.
@Zorro_320 barrel looks great 👍 the bolt I swapped out after the first thousand rounds or so. She also got new furniture (she earned it) toolcraft makes a dual ejector BCG with enhanced firing pin for hotter 308 loads...and it only cost 135$ straight from toolcraft. I just keep my old BCG as a backup in the gun bag.
@@devinotterbine3287 Yeah, they just teased an image of a .308 Jakl Sabre production version. They tease images right before they announce release dates.
It’s pulling better performance than most Gucci offerings. It’s past respectable and right in the contender. Not all ammo is equal, however S&B that I’ve shot is the best. Have not tried the federal premium stuff, but don’t see a need to with dime grouping with 6.5 Creedmoore.
Jakl will be so cool, this is one sweet rifle, almost reminds me of a Geissele super duty, how’s the trigger compare to the geissele trigger is my question, psa is so good for the money I don’t think anyone can beat them
Trigger is nice, we go over it towards the end of the video. It's a medium to light 2 stage trigger. Not as crisp as a Geissele but definitely great for the price.
Dude love the videos always a great display of entertainment. Finally snagged one ordered a razor 1-10 gen 3 on a reptilia mount but will pas that 1-10 down to my superduty 14.5 and get the same scope as you here
With a FFP optic that has a Christmas tree style reticle, use the reticle to measure your adjustment when zeroing. I.E. put center reticle at your POA and measure to your POI, whatever that measurement is in mils is your adjustment in mils, works for any distance. It defeats the need for converting from inches and the error built into converting.
I have the Sabre AR-10 billet 20" version and it shot 175 gr Federal GMM SMK better than the 168 gr. version. With the 1:10 twist you might try that. I had a 5 round sub 1/2" group with the 175 and right at 1" with the 168. Great content, keep it coming. Side not I shot it with the Dead-Air Sandman S
I have this and a Tavor 7 for my 308 platforms. I love your setup. Ironically, I have a few of my 556’s setup with LPVO’s, and both 308’s setup with Eotech/magnifier setups. Go figure, I’m weird.
Great video! I really enjoyed! Amazing what you're getting for $1200. Roger, not trying to be an AKSHUALLY. I promise. I watched two videos where you were talking yourself through Sight-adjustment & Zero, saying there's 3.36" per milirad @100yds. Brother, it's 3.6" at 100yds and 3.9" at 100m. Not that it makes a significant difference but for the long range shooters that watch your videos, they will appreciate your expertise more. Just trying to be helpful, not a hater! Keep doing what you're doing!
I appreciate it man, there should be an on screen correction at 4:10 in this video as I caught it during the editing of this video, I just mispoke. I always forget it's 3.6 and not 3.36 when I'm on the range. Thank you though.
Big .308 auto fane and that’s a sharp rig Roger….i run dd5v3 with 3x15 viper with all the other goodies for dmr’s and man what a rifle…if you handloaded I’d say try the 110gr v max or nosler varmageddons for high velocities and killer accuracy….i was in 3300fps range 16” barrel and they don’t overpenetrate..even a 20oz they stay inside of at 100yrds….it goes 💥🚀
Between the excellent barrel, FCG, glass; and with the solid groups you shot…I think PSA just sold a lot more 110A1s. The Huxwrx seemed like a perfect add on too! What is that rear sand bag you were using? Did you rest your chin on it?
I put together a list of scopes in the power range - of 3-18 to 4-20. After comparing the speciation from NF, Leupold, Burris, and another Tract - Brownell MPO 3-18x50mm34mm(T), elevation Mrad 40, and windage 30, the MPO was not on the list. It had everything I wanted in scope plus cost $1000 sale price $699 ($632.00 veterans discount).
😮i want to put a 20"+ barrel on this and do longer range shooting. Is this possible or do other things need to be changed, also what are good iron sigjts for this?
I have the same magpul bipod, it wobbles around so much I ditched it and went back to harris bipod. I saw yours twitching just like mine. My groups did decrease when using the harris.
HI, Myself & many other would love to know what the weight of the buffer is in that 110, i'm having trouble getting my gas dialed in & i want to try some different buffers weights i love to know the weight in yours
Maybe over gassed or to much buffer weight. Those are generally the two areas that could cause that. Maybe look into a adjustable gas block, I run one on almost all my AR's
I checked for heat with barrel and the gun didn’t heat up too much. It may have played a factor but I dont think it was too crazy since I shot 5 round groups in a slower cadence. Good question for sure!
this the ammo test you cant really drive any conclusions with there not being at least one good group under 1moa, but at least you can say all the ammo was within the exact same group of 1-2" seems like the HPBT match bullets or copper solids always have better results with less variables to go wrong in flight.
@@RogerBarrera I would say so. Its my benchmark for factory ammo to see what a barrel can do. I have not had great luck with 168gr FGMM, but 175gr FGMM will do sub-MOA out of my SASS and about MOA out of my SCAR17s. Worth trying IMHO.
Friendly Tip for Zeroing - you have a ruler in your scope. With 18x you should be able to see your impacts on paper at 100y. You just need to measure in mils from your POI to your POA - in this case it was probably 2.2 mils low. So you just dial up 2.2 mils (22 clicks). No need for all the math. Happy shooting! The rifle looks dope! Good review
Thanks! Appreciate that!
PSA has always been a solid option, but their Sabre line is just awesome. Power to the People!
From what I've seen of this rifle, it's hard to look at some of the more expensive options out there. PSA catches a lot of crap by Gucci gun bros for selling firearms so cheaply, but at least with this line of rifles it really looks like PSA is better than just "good enough." And at around $1200 what's not to like?
@@HatsuneM1ku01 The Aero Precision M4e1 ($1250) and FN patrol carbines ($1350) in 5.56x45. The Sabre M110A1 is an AR-10 in either .308 or 6.5. The AERO Precision M5E1 is an fine AR-10 with 20" barrel and it is priced complete around $1800. FN SCAR is an awesome .308! But it will set you back about $4,000.
Absolutely love the new POV. Being able to see what you’re seeing brings the viewer right behind the scope. This rifle is on my 2024 get-list! 🤙
Thank you! Appreciate ya checking out the video!
that color scheme is so sick
Thank you! We dig it as well!
Got my billet Sabre “110A1”. Haven’t shot it yet but I’m excited especially after seeing these results. Purchased a FDE Sig Tango MSR and mounted it to complete the concept. GREAT VIDEO! Thank you
Heck yeah, their 1-10 in FDE was my second choice! You'll dig it!
I just got my forged 10a1 and have a primary arms 1-8 lpvo I mounted to it. Still need to go to the range with it.
I love the fact that the cameras on the optic itself. Haven’t seen that before and I’m all for it.
Thank you yeah, using trigger cam, so my audience can see exactly what I am seeing. Thanks for checking out the video.
@@RogerBarrera it’s a good differentiation. Sets you apart. Also we can learn what good aiming and control looks like. 👍
Now this is a shtf rifle... ❤
Yeah man! Def digging this entire setup for sure!
@@RogerBarrera also if you are deaf like me, It's likely that you don't need ear pro ever.
Its always crazy when you could buy two guns, for the price of the glass!!
Right!? Worth it though, glass is clear AF!
It's always been that way, if you're a rifleman.
My 18 inch Armalite comp AR10 is a big fan of the Fed 168 gr SMK’s. Got about the same results. It is more than half of the PSA. Impressed again with another PSA product.
Another great video. I appreciably all the data on ammo weights and accuracy! Thats one sharp looking gun
Thanks man, appreciate that!
OK, I want it! This rifle looks fantastic and it's definitely an economic way to get into .308. Thanks for giving us the rundown on this compelling option! 🔥🔥🔥
Yeah man! This one is def one to get. The performance and aesthetic are on point! Next video is distance!
Nice review Roger! Thorough, concise and professional.
Thank you kindly! Appreciate you checking it out!
Great footage !! PSA are making big moves in quality and durability gotta cop this one
Yessir! Agreed for sure!
Love my budget PA-10. 18” stainless barrel upper $399, $189 lower. Free shipping for both. Couldn’t beat it.
Enjoyed the video. Big PSA/JJE fanboy here ... good people. I've got the 20" billetted version that I love ... with the A2 stock. Well, A1/A2 stock. It's the one thing I may change. Anyways .... FN hammer forged barrel is sub MOA for me with factory SMK 168s and especially with my handloads. Subscribed, bell rang, commented, liked, upvoted, shared .... may the algorithm gods smile favorably upon your channel.
Haha I appreciate it man, thank you!
Good groupings man- solid demonstration of the rifle's accuracy
Thanks man!
Best thing this rifle did was put the PA-10 308 on sale for 570$ 😂 mines still going strong after 3000+ rounds
Oh nice!!! I’ll have to look into that one as well!
@RogerBarrera I've been reviewing it in my Armory Playlist ▶️ its a nice test rifle tho in 308 that I don't have to worry about
@@mobilegamersunite oh nice man! Good stuff for sure!
How’s your bolt and barrel look after 3,000+ rounds
@Zorro_320 barrel looks great 👍 the bolt I swapped out after the first thousand rounds or so. She also got new furniture (she earned it) toolcraft makes a dual ejector BCG with enhanced firing pin for hotter 308 loads...and it only cost 135$ straight from toolcraft. I just keep my old BCG as a backup in the gun bag.
Once the 308 Jakl is released you've gotta get your hands on one and compare the two.
Any news if it's confirmed that psa will make the jakl in .308?
@@devinotterbine3287 Yeah, they just teased an image of a .308 Jakl Sabre production version. They tease images right before they announce release dates.
Love the video. Sweet camera pov. Question though? Where did you get that jacket from? Dope af jacket! 👀👀👀
Wondering the same myself
That color scheme is dope. I might have to bite on that one. Thanks for sharing
Just test drove it at the Gathering - Fantastic Rifle!
Nice!
🇺🇸
Really respectable results regardless whether this is a "budget" gun
Agreed for sure! Super happy with the results!
It’s pulling better performance than most Gucci offerings. It’s past respectable and right in the contender. Not all ammo is equal, however S&B that I’ve shot is the best. Have not tried the federal premium stuff, but don’t see a need to with dime grouping with 6.5 Creedmoore.
@@1014p that's awesome! It's definitely on my list that's ever growing🤣
I'm really digging y'alls content and products man. This is great stuff!
Much appreciated! Thank you!
This rifle is rapidly moving up the list of must gets. Could be a great "heavy" gas gun comp setup!!
Yeah man, definitely one of my new favs for sure!
Convince them to release the A1 in 6.5 with the same 16” length!
Ooooo that would be dope!
Just build a 16 inch 6.5 upper. Or you can just do a barrel swap. 6.5 Creedmoor and 308w have the same bolt face.
@@RogerBarrerathey released this in 14.5” with 6.5CM! Mine arrives Wednesday
Jakl will be so cool, this is one sweet rifle, almost reminds me of a Geissele super duty, how’s the trigger compare to the geissele trigger is my question, psa is so good for the money I don’t think anyone can beat them
Trigger is nice, we go over it towards the end of the video. It's a medium to light 2 stage trigger. Not as crisp as a Geissele but definitely great for the price.
Our Zebra units I believe are using that 168 SMK. Great review again my man.
Ahhhh good to know! Thanks man!
Dude love the videos always a great display of entertainment. Finally snagged one ordered a razor 1-10 gen 3 on a reptilia mount but will pas that 1-10 down to my superduty 14.5 and get the same scope as you here
Thanks man! Appreciate the kind words and taking the time to watch our videos. 👍🏼👊🏻
With a FFP optic that has a Christmas tree style reticle, use the reticle to measure your adjustment when zeroing. I.E. put center reticle at your POA and measure to your POI, whatever that measurement is in mils is your adjustment in mils, works for any distance. It defeats the need for converting from inches and the error built into converting.
That 1/4 zip, Night Desert hoodie is drip. bro.
Thanks AllSkillNoLuck
@@RogerBarrerais AllSkillNoLuck who makes that hoodie-1/4zip? Searched for it but didn’t see it on website. Looks amazing
The term "Drip" is for the short bus.
@@gordon5008usually a plumber needs to be called as well…
I have the Sabre AR-10 billet 20" version and it shot 175 gr Federal GMM SMK better than the 168 gr. version. With the 1:10 twist you might try that. I had a 5 round sub 1/2" group with the 175 and right at 1" with the 168. Great content, keep it coming. Side not I shot it with the Dead-Air Sandman S
Thanks man! Appreciate the info and kind words!
I have this and a Tavor 7 for my 308 platforms. I love your setup.
Ironically, I have a few of my 556’s setup with LPVO’s, and both 308’s setup with Eotech/magnifier setups. Go figure, I’m weird.
Haha, dude that's awesome man, do what works for you brotha! I appreciate you checking out the video!
Great video! I really enjoyed! Amazing what you're getting for $1200.
Roger, not trying to be an AKSHUALLY. I promise. I watched two videos where you were talking yourself through Sight-adjustment & Zero, saying there's 3.36" per milirad @100yds. Brother, it's 3.6" at 100yds and 3.9" at 100m. Not that it makes a significant difference but for the long range shooters that watch your videos, they will appreciate your expertise more.
Just trying to be helpful, not a hater! Keep doing what you're doing!
I appreciate it man, there should be an on screen correction at 4:10 in this video as I caught it during the editing of this video, I just mispoke. I always forget it's 3.6 and not 3.36 when I'm on the range. Thank you though.
Definitely splitting hairs. 😂
Hoping they release this in a 16" 6.5 creedmoor
Beautiful build
Have the M110 in 6.5. Might need this one in x51 if you keep making vids
Yessir! Next us is distance and it didn’t disappoint!
Big .308 auto fane and that’s a sharp rig Roger….i run dd5v3 with 3x15 viper with all the other goodies for dmr’s and man what a rifle…if you handloaded I’d say try the 110gr v max or nosler varmageddons for high velocities and killer accuracy….i was in 3300fps range 16” barrel and they don’t overpenetrate..even a 20oz they stay inside of at 100yrds….it goes 💥🚀
Just got this rifle and can't wait to test it out.
Where is that hoodie from??
One for the AlGoreRhythym 💪 🤙 🇺🇸
Haha much appreciated!
Will this ever be in stock
Heck yeah man HOOCHIE COOCHIE CHOO CHOO TRAIN 🎉 BABY!!!
Between the excellent barrel, FCG, glass; and with the solid groups you shot…I think PSA just sold a lot more 110A1s.
The Huxwrx seemed like a perfect add on too!
What is that rear sand bag you were using? Did you rest your chin on it?
Thanks man, appreciate the kind words. It’s a Wiebad shooting pillow. Def a game changer for me and yep, you can rest your chin on it too.
S&B has performed well for my low key testing in 6.5 Creedmoore. Best grouping and reliably groups. I’ve run there slugs which are very nice as well.
I put together a list of scopes in the power range - of 3-18 to 4-20. After comparing the speciation from NF, Leupold, Burris, and another Tract - Brownell MPO 3-18x50mm34mm(T), elevation Mrad 40, and windage 30, the MPO was not on the list. It had everything I wanted in scope plus cost $1000 sale price $699 ($632.00 veterans discount).
I think this is the best rear bag I’ve ever seen. Please add a link. Great shooting
Wow!
been wanting this gun forever bc i can never find it in stock. Sign up for email notifications of restocking but never get any. Love psa though.
Last I checked it weighed around 20-22lbs with optic. It shoot’s great for the price.
20LBS?! Absolutely not haha wtf did you mount a refrigerator on yours?!
😮i want to put a 20"+ barrel on this and do longer range shooting. Is this possible or do other things need to be changed, also what are good iron sigjts for this?
You gotta review the psa jakl .308 when it drops man 🔥
Omg the group drawing on the target head lololol
I came here hoping I wasn't the only immature one. 😂
Bwahahah! Didn’t even realize haha! It’s a target from a previous handgun video. 🤣😂
@@RogerBarreraJust a “Heads” up…
@@charlesmullins3238 bwahahah
"My Asian math is on point today" LMAO
that camera is insane
Where did you get the 1/4 zip hoodie? I want it
Your thoughts on the stock trigger? Would you swap since you said you wanted to do precision matches? Great video. Like the POV camera.
Where is the link to your desert hoodie?
I have the same magpul bipod, it wobbles around so much I ditched it and went back to harris bipod. I saw yours twitching just like mine. My groups did decrease when using the harris.
If you push the cardboard all the way down towards the base you’ll get less flex in the wind
Good tip! Thank you!
What top are you wearing? The new scope cam is nice!
All Skill No Luck
Great video. The 308 Ar is the best in my opinion.
need a bronze badger ordnance mount
Which reticle were you using
Thats tremor 3 reticle
@@sumblakdude9yep that’s the one!
Ok serious question... where did you get that hoodie?
HI, Myself & many other would love to know what the weight of the buffer is in that 110, i'm having trouble getting my gas dialed in & i want to try some different buffers weights i love to know the weight in yours
Awesome Vid @RogerBarrera Bro where can I get this DNC jacket?! P.S your Merch link doesn't work!
That's from AllSkillNoLuck, they don't have them anymore I believe.
That’s a good LD grouping up top
Hey oh !Great video! Question how was the primer strike on the brass I’ve been haVing primer piercing on my 308/6.5 creedmore build.
It was good with this setup. No issues.
Check your buffer , go with H2 or H3 with lite strikes. Hope that helps
@@Brandon-cm7whim not having light strikes it primer piecing I’m having
Maybe over gassed or to much buffer weight. Those are generally the two areas that could cause that. Maybe look into a adjustable gas block, I run one on almost all my AR's
@@lby808ek sorry I miss read your first comment. My bad 😔
How would you rate this against the Daniel Defense DD5 V3
Lot better than my Armalite AR-10a. And, at a third of the price.
Did you account heat with you POi shift due to barrel heat especially with a suppressor installed, or was it negligible because of ambient temps.
I checked for heat with barrel and the gun didn’t heat up too much. It may have played a factor but I dont think it was too crazy since I shot 5 round groups in a slower cadence. Good question for sure!
this the ammo test you cant really drive any conclusions with there not being at least one good group under 1moa,
but at least you can say all the ammo was within the exact same group of 1-2"
seems like the HPBT match bullets or copper solids always have better results with less variables to go wrong in flight.
Love colored rifles! 😍
I recommend a spotting scope 😁
Who made that shirt? Night camo looks amazing
AllSkillNoLuck
Can you give the details on the scope and suppressor you purchased? I’m looking to get both of them. Thanks!!
Yes I can, check out the video at 20:53 mark.
It's crazy how often "flyers" come up. 😂🤣
Where are you shooting at?
Great video!!
Beautiful rifle...
As much as i love my Leopold optics; that scope you have isn't much better than my Arken , at least not through your camera?
Cool video, though.
Best thing about this video is that daytona😮
Haha, I wish. It's a Seiko Prospex, very similar and only about 500 bucks. One day i'll get that Daytona Panda!
@@RogerBarrera man it looks legit at first glance! Seikos are great watches man and I believe you will to brotha🫡
@@odacious2571 thanks man, appreciate that!
HEYYYYYYOOOOOOOO!!!!!!
Hey oh! Thanks as always for stopping by!
where are you shooting at in vegas
I need psa to put this in stock
Any idea what the naked weight of the gun is? I haven’t been able to find that info anywhere.
Great first group, to be fair , at least ten shots helps the new barrel warm up , big hurry . Beautiful Rifle 😍. Great job Rodger ❤
That Mark 5 is 🔥
how long did you let the barrel cool between groups?
What MOA mount is that?
i got the email today, by the time i got the site they were gone. cant remember the last time i wanted a gun this bad
Nice shirt. What is it?
AllSkillNoLuck
Did the suppressor work with the stock compensator? As for the weight I thought it was light.
Suppressor needs the HUXWRX muzzle device.
Quick question, what mount did you use for the canted red dot? How do you feel about it?
I belive I used the one from Leupold for this setup.
Feels pretty solid.
Hi bro, what is your scopecam for recorder scope?
Triggercam
Scope height ? (If you said it my bad ! )
You gotta try the Federal Gold Medal Match 175gr SMK round.
Significantly better than the Federal Gold SMK 168?
@@RogerBarrera I would say so. Its my benchmark for factory ammo to see what a barrel can do. I have not had great luck with 168gr FGMM, but 175gr FGMM will do sub-MOA out of my SASS and about MOA out of my SCAR17s. Worth trying IMHO.
@@KirShizzle copy that! Appreciate the info, I’ll check it out!
@@RogerBarrerawhat shooting bag are you using here? Looks comfy. Keep the vids coming good sir!
10rd groups are def the way to go for when measuring accuracy
Maybe we'll start doing that moving forward, thanks for the tip!
@@RogerBarrera sadly ammo costs so much so very much can understand why not lol
10rds of SMKs is $20-30
Seiko Speedtimer?
It's a Prospex from Seiko, I believe the newer version of the Speedtimer? Closest thing I'll get to the Daytona Panda until my AD lets me buy one.
Haha, I'm a dummy, it's the Prospex Speedtimer, good eye!