I used a soldering iron called "HAKKO FX-600". I don't own it, but I found it in the workroom of Yusha Kobo where I assembled lily58. This is a reliable maker and I can recommend this tool.
No. I was also a beginner, but I was able to build it. The point is to work carefully and read the build guide carefully and it will work. It's a lot of fun so I definitely want you to try it.😆
Daihuku Keyboard thanks for replying! I’ve been wanting to try an ortho split keyboard for a while now. The lily58 seems like the perfect price. I may give it a go!
Thanks for watching! Unfortunately, this keyboard is not compatible with ChocV2. There are plenty of other keyboard build videos out there, so be sure to check them out! ruclips.net/p/PL6MZG9NsHzeDbPo6w2OaSY6IwVlTGJlcg
OLEDs are programmable. I've never programmed it, so I don't know much about it. But you can find examples of programming on the web. For an example, see the following site www.tnksoft.com/blog/?p=8291 ubansi.hatenablog.com/entry/2019/03/21/223613 qiita.com/guri3/items/844675b637c88515a989 medium.com/@melpon/%E8%87%AA%E4%BD%9C%E3%82%AD%E3%83%BC%E3%83%9C%E3%83%BC%E3%83%89%E3%81%AB%E3%82%B2%E3%83%BC%E3%83%A0%E3%82%92%E4%BD%9C%E3%81%A3%E3%81%A6%E5%85%A5%E3%82%8C%E3%81%9F%E8%A9%B1-a4840a83518e
i have a question, i need to flash the two pro micros separately?, and if it is, i is the same process for both?, i have questions on that, and, can i flash the pro micros before soldering anything? (just the pro micro without the keyboard) thanks!
TRRS has 4 cores and TRS has 3 cores. Some keyboards only support TRRS. If both are supported, it doesn't matter which one you use. It is necessary to read the document such as the build guide to check the compatibility status.
I'm sorry, I can't sell my keyboard to you. However, Japanese keyboard shops offer a service to build for you. If you are interested, please visit the site yushakobo.jp/shop/assembly-service/
A jumper required when using OLED. There are two pads in pairs, four sets of them, for a total of eight pads. This is soldered to join the pairs together.
Is this product you are looking for? Unfortunately, it seems to be sold out, but once the stock is restored, you should be able to buy it. yushakobo.jp/shop/a01mc-00/
ありがとうございます。同じキットを買ったはいいものの電子工作はほとんどやったことがないので途方に暮れていました。参考にさせていただきます。
お役に立てられたら嬉しいです！😄作る過程も楽しみの一つなので頑張ってください！
今日自宅で制作しましたが、大変参考になりました！ありがとうございます。
嬉しいコメントありがとうございます！お役に立てられてよかったです😆
参考になりました。ちょうど作り買ったやつなので助かります😀
お役にたてられて嬉しいです！😆
I heard that Mitch Mitchell intro! Don't think you can sneak it by me! It's from Axis: Bold as Love, "She's So Fine."
今週末に同じLily58proを作りに行くので参考にさせていただきます(^o^)
おぉ！そうですか！
お役に立てられたら嬉しいです。
組み立て頑張ってください👍
What soldering iron did you use? I'm building a lily58 too and I don't know if I can use a cheap one for the SMD stuff
I used a soldering iron called "HAKKO FX-600".
I don't own it, but I found it in the workroom of Yusha Kobo where I assembled lily58.
This is a reliable maker and I can recommend this tool.
@@DaihukuKeyboard That's one of the top brand for solder station :P
As a beginner in soldering would it be wise to stay away from this?
No. I was also a beginner, but I was able to build it. The point is to work carefully and read the build guide carefully and it will work. It's a lot of fun so I definitely want you to try it.😆
Daihuku Keyboard thanks for replying! I’ve been wanting to try an ortho split keyboard for a while now. The lily58 seems like the perfect price. I may give it a go!
自作キーボードは、一朝一夕にはいかないといういい見本ですね。
半田つけのオンパレードｗ
でも、いざ使えた時が楽しい＾＾
その通りですね！🤗
完成した時の喜びがクセになってしまって、組み立てる工程が趣味になってきました😇
I still can cannot get my Oleds to work. Everything else works though.
こういう形状で日本語配列のを使ってみたい…キーマッピング？とか設定できるのでしょうか…
US配列に慣れるしかないのかな？
学生時代からずーっとJIS配列だったので（ワープロ検定とかもあったので）
キーマッピングは自由に出来ますよ。
『自作キーボード qmk』でググるとかなり情報が出てくるのでよかったら見てみてください。
qmkのキーコードを理解すればJISも使えますよ。
Awesome build! What are the keycaps you are using? I can't find anything similar...
You can find it by searching for kailh choc keycap.
Hey bud, don't know if you found any but here ya go
mkultra.click/collections/keycaps/products/kailh-choc-keycaps?variant=31918589050978
@@justineckert6205 Awesome! Thank you!!
4:08 の曲は何でしょうか！？気になります。
キーボードの話でなくてスミマセン🙏
こちらでしょうか
Sophomore Makeout
ruclips.net/video/g2HzEvU1roY/видео.html
@@DaihukuKeyboard これです！わざわざありがとうございます🙏🙏
Thanks for this video. Where can i find the software to program the micros? :)
Thanks for watching the video! The firmware written to ProMicro is QMK
qmk.fm/keyboards/
great video! Dose it fit with Kailh Choc V2???
Thanks for watching! Unfortunately, this keyboard is not compatible with ChocV2.
There are plenty of other keyboard build videos out there, so be sure to check them out!
ruclips.net/p/PL6MZG9NsHzeDbPo6w2OaSY6IwVlTGJlcg
これとergodashやlilypro,claw44,fortitudeなどで迷ってるんですよね。エルゴ系の小さめで言うと結構みんな求めていて種類豊富になってきたので．何か決めるポイントとかってありますかね
●数字行の要否
その候補であれば claw44だけ数字行がなく、他の製品はあります。ご自身で数字キーがいるかいらないかでまずは判断。(物理的になくてもキーマップ設定で数字キーは定義しているので勿論数字入力は可能です)
●高さ(薄さ)
Lily58 Proとclaw44がかなり薄い部類になります。手首の高さに関係します。リフトレストを使う想定ならあまりきにしなくてよいです。
●USB-typec対応
fortitudeだけUSB Type Cに対応しており他はmicro のみです。
●デザイン
Columnar Staggered配置という点でみんな共通なので最後にデザインの好みでよいと思います。
参考になれば🤗
Daihuku Keyboard ありがとうございます！よく吟味して買います！
この動画で、Lily58 proの購入を決めました！
なんと！！
嬉しいコメントありがとうございます♪
自作キーボードを楽しんでください〜😆
Im considering this keyboard. Could you tell me what can you with the screens? Can those be programmed or configured?
OLEDs are programmable. I've never programmed it, so I don't know much about it. But you can find examples of programming on the web. For an example, see the following site
www.tnksoft.com/blog/?p=8291
ubansi.hatenablog.com/entry/2019/03/21/223613
qiita.com/guri3/items/844675b637c88515a989
medium.com/@melpon/%E8%87%AA%E4%BD%9C%E3%82%AD%E3%83%BC%E3%83%9C%E3%83%BC%E3%83%89%E3%81%AB%E3%82%B2%E3%83%BC%E3%83%A0%E3%82%92%E4%BD%9C%E3%81%A3%E3%81%A6%E5%85%A5%E3%82%8C%E3%81%9F%E8%A9%B1-a4840a83518e
i have a question, i need to flash the two pro micros separately?, and if it is, i is the same process for both?, i have questions on that, and, can i flash the pro micros before soldering anything? (just the pro micro without the keyboard) thanks!
ProMicro must be flashed separately. Both are the same process. You can flash before soldering.
@@DaihukuKeyboard Thank you!!!
what is the disadvantage of using trs instead of ttrs?
TRRS has 4 cores and TRS has 3 cores. Some keyboards only support TRRS. If both are supported, it doesn't matter which one you use. It is necessary to read the document such as the build guide to check the compatibility status.
Hi, i would like to buy this keyboard fully built from you, is it possible?
I'm sorry, I can't sell my keyboard to you. However, Japanese keyboard shops offer a service to build for you. If you are interested, please visit the site
yushakobo.jp/shop/assembly-service/
こんばんわ、lily58 proを作ったのですが VIAでメディアの設定が出来なくて困っています。
スペシャルのAnyでキーコードを３種ほど試しても ダメでした。
ボリュームアップ、ダウン、ミュートだけ使いたいのですが教えていただけると嬉しいですm(_ _)m
ANYではなく、MEDIAカテゴリの中から該当キーを探してみるとどうでしょうか。
こちらでサポートをしているわけではないので、ご理解いただけると助かります。
@@DaihukuKeyboard お返事ありがとうございます。MEDIAカテゴリは試し済でダメだったんです。 質問して、すいませんでしたm(_ _)m
3:53 what happens in this step? those 4 solder blobs in there.
A jumper required when using OLED. There are two pads in pairs, four sets of them, for a total of eight pads. This is soldered to join the pairs together.
@@DaihukuKeyboard Thank you very much for answering.
Where did you find these pins for the mcu? I was looking hours for it, but couldn't find them
Is this product you are looking for? Unfortunately, it seems to be sold out, but once the stock is restored, you should be able to buy it.
yushakobo.jp/shop/a01mc-00/
@@DaihukuKeyboard thanks