I needed to see this. I have been so concerned about my foam coming unglued inside the cushions. In the short term, it appears I have nothing to worry about. Not sure about long term.
The glue does slightly firm up the section that is bonded, but once a cover fabric is applied it is very difficult, it not impossible, for the occupant to find the glued section of foam be feel alone. The practice of glueing sections of foam together is common and usually expected for large to medium seating foam applications.
I am using polyurethane in a unique application, and I am looking for a glue that might work to permanently secure a thin vinyl sheet to bare polyurethane, would you recommend trying this glue first?
To prevent spray nozzle from blocking, at the end of each day, turn the can upside down and press tip until spray is clear from adhesive. Sorry, no mini cans.
does the adhesive dry to a pliable or stiff texture? Is it noticeably stiffer than the sections of foam it is gluing together? and you feel the seam is stiffer than the surrounding foam?
The glue is so thin that you will not feel the glue section when the cushion cover is applied to the foam. The only possible person who may, is the fabricator, since they know where the seam is, but no one else will be able to feel it without a ton of effort.
@@SailriteDIY The reason why i ask is because I have a foam mattress that has a memory foam topper. I had to take off the cover to cut it down to a different size and the memory foam did not bond well to parts and in some sections even tore. So I wanted to re-bond it and perhaps somehow repair the tear in the memory foam before putting on another cover over the foam. I am going to put on a zippered encasement as a cover. the size is not snog over the mattress, so this makes it especially useful if i can rebond the parts that car coming up or that have torn.
@@SailriteDIY i am wondering if i don't have a lot to bond.. if i could use a squirt bottle of regular polyurethane liquid glic to create a bond.. perhaps not a full bond of all the foam surface?
I have never used it on memory foam, so I am not sure how it will work on that. For an MSDS you can email documents@sailrite.com and ask for the Foam Lock Spray Adhesive MSDS
Yes, I have used it with Naugahyde and glued the vinyl fabric to a wooden surface with great success. I have not tried it on a Naugahyde to foam application. It should be tested to see results before that is done. I know it would bond, but if it is sat on several times, would the fabric still look good????
@@SailriteDIY have you found any alternative products that work nearly as good or maybe even better than the NG1633? Such as Gorilla Heavy Duty Spray Adhesive or?
We do not sell those brands so we do not know, sorry. Here is our chart for comparisons of what we carry: www.sailrite.com/Choosing-Right-Spray-Adhesive Scroll to the bottom to see the chart.
So which one is the best for memory foam. (This clip didn't exactly answer my question) I have a mattress topper that was stored incorrectly (folded instead of rolled up)and it ripped in about 3 pieces. I need it where it's stuck together to be as soft as the memory foam is normally because the rips run across the bed where I need the support for my spine.
Yes, it may be possible to use Foam Lock Spray Adhesive to bond foam to plastic, just do some testing first. If this is a headliner application use 3M General Trim Adhesive instead.
Hi ,our company specialize in spray adhesive for 20 years,we can sell to Canada,if you need,please contact me WhatsAPP:+8613829142837 Email:dyqwj13@dayangsprayidea.com
Hi ,our company specialize in spray adhesive for 20 years,we can sell to Canada,if you need,please contact me WhatsAPP:+8613829142837 Email:dyqwj13@dayangsprayidea.com
Now this is an advertisement! Thank you for this video. I'm excited to buy your product.
Love the honesty
Is this good for memory foam?
Wow, looks like great stuff, I'll have to try it when I need to glue some foam together
Great! Let us know if you have any questions about any of our projects or products.
I needed to see this. I have been so concerned about my foam coming unglued inside the cushions. In the short term, it appears I have nothing to worry about. Not sure about long term.
As long as Zach doesn't come in and try to pull it apart with his shoe it should be good
Exactly what I needed! Great vid!
Does the foam keep is softness and flexibility after glued together? Or do the glued sections harden up?
The glue does slightly firm up the section that is bonded, but once a cover fabric is applied it is very difficult, it not impossible, for the occupant to find the glued section of foam be feel alone. The practice of glueing sections of foam together is common and usually expected for large to medium seating foam applications.
Thank you!
You are welcome!
I am using polyurethane in a unique application, and I am looking for a glue that might work to permanently secure a thin vinyl sheet to bare polyurethane, would you recommend trying this glue first?
Is that spray adhesive can be used to stick foam with Mild steel sheet?
It might work, but you should test it first. We have not tested it with a steel sheet and foam.
Could this attach foam padding to the inside of a plastic case?
It should work well for that.
How do I keep spray adhesive can from clogging the first project or what do you recommend for one time use/mini cans? Do they exist?
To prevent spray nozzle from blocking, at the end of each day, turn the can upside down and press tip until spray is clear from adhesive. Sorry, no mini cans.
Can this glue stick foam to a wall?
Is it good for a polyethylene foam?
Interesting. Seems like this glue would work great for cosplay applications
Where can I get it in India let me know
Iron sheet it peasting.. that Vehicle top cloth...plz reply
Is there any glue that bonds together polyurethen foam to car tire? Im trying to put foam inside the tire to give less noise road bump.
I have no idea how to answer that question, sorry. You would have to test it out. If it were me I would try 3M Super Trim.
does the adhesive dry to a pliable or stiff texture? Is it noticeably stiffer than the sections of foam it is gluing together? and you feel the seam is stiffer than the surrounding foam?
The glue is so thin that you will not feel the glue section when the cushion cover is applied to the foam. The only possible person who may, is the fabricator, since they know where the seam is, but no one else will be able to feel it without a ton of effort.
@@SailriteDIY The reason why i ask is because I have a foam mattress that has a memory foam topper. I had to take off the cover to cut it down to a different size and the memory foam did not bond well to parts and in some sections even tore. So I wanted to re-bond it and perhaps somehow repair the tear in the memory foam before putting on another cover over the foam. I am going to put on a zippered encasement as a cover. the size is not snog over the mattress, so this makes it especially useful if i can rebond the parts that car coming up or that have torn.
@@SailriteDIY i am wondering if i don't have a lot to bond.. if i could use a squirt bottle of regular polyurethane liquid glic to create a bond.. perhaps not a full bond of all the foam surface?
Where can I get some to buy ?
www.sailrite.com/NG633-Foam-Lock-Spray-Adhesive-12oz
I tried to purchase but they won't ship to Canada bcoz its flammable item. Does anyone know where to purchase this spray in Canada? Thanks
Hi，please contact me WhatsApp:+8613829142837 Email:dyqwj13@dayangsprayidea.com
It looks good - dose it contain Dichloromethane in the formula ?
Here is the MSDS sheet for that spray: www.sailrite.com/PDF/NG633_MSDS.pdf
Can I use on wood? like glue the foam to the wood
Yes, it will glue foam to wood.
would this be ok to be used on a memory foam mattress? I mean in terms of it being toxic or after it dries should be ok?
I have never used it on memory foam, so I am not sure how it will work on that. For an MSDS you can email documents@sailrite.com and ask for the Foam Lock Spray Adhesive MSDS
Can you send me the name of the adhesive spray you're using please?
It’s on the bottle. 633 Foam Lock
May i know the name or the brand of this glue foam..Needed it..Hope i can find it here in the Philippines
Here is a link to the product. www.sailrite.com/NG633-Foam-Lo...
Very impressive!
How does this adhesive compare to contact cement and does it smell as bad?
It is much easier to apply than contact cement and has very little smell. I love it!
Awesome, would this also work to adhere fabric to foam? Like naugahyde to very firm foam.
Yes, I have used it with Naugahyde and glued the vinyl fabric to a wooden surface with great success. I have not tried it on a Naugahyde to foam application. It should be tested to see results before that is done. I know it would bond, but if it is sat on several times, would the fabric still look good????
@@SailriteDIY have you found any alternative products that work nearly as good or maybe even better than the NG1633? Such as Gorilla Heavy Duty Spray Adhesive or?
Hey, can this be purchased in UK? If not what do you recommend please?
I don't think it can be shipped to the UK, sorry. 3M General Trim is what I would recommend if you can't get this.
Hi there thanks for your video, question: I bought new foam but it's not firm enough, can I glue old foam to the new foam?
how does that adhesive compare to Scotch 77 or Cami 303? ease, strength and cost?
We do not sell those brands so we do not know, sorry. Here is our chart for comparisons of what we carry: www.sailrite.com/Choosing-Right-Spray-Adhesive Scroll to the bottom to see the chart.
Would this foam lock spray work with high-density cold cure foam?
This might help me a lot
Is it non toxic? Im glueing foam together for a crib mattress. Will this be ok?
That question requires the Safety Data Sheet. Here is a link to the MSDS: www.sailrite.com/PDF/FoamLockAdhesiveSDS.pdf
@@SailriteDIY Not sure if that was a yes or no answer. The link is broken.
What would you recommend for gluing latex cushion foam?
So which one is the best for memory foam. (This clip didn't exactly answer my question) I have a mattress topper that was stored incorrectly (folded instead of rolled up)and it ripped in about 3 pieces. I need it where it's stuck together to be as soft as the memory foam is normally because the rips run across the bed where I need the support for my spine.
Can you use foam lock to bond sponge onto plastic materials? if not, what can i use to bond sponge onto plastics?
Yes, it may be possible to use Foam Lock Spray Adhesive to bond foam to plastic, just do some testing first. If this is a headliner application use 3M General Trim Adhesive instead.
can we use this glue for polyethylene foam ?
if yes,then how much strength it possess..
Yes, we used it on a high density Polyurethane foam and the bond was so strong that when pulled on the foam ripped and not the are that was glued.
i ask for polyethylene foam
Oh, sorry. I have not tried that, but I bet it would be.
RAHUL KANNAWAR Did you try it? Did it work?
Does the foam make any sound later when glued together?
No it does not. No sound or noise.
@@SailriteDIY name is glue
Using this adhesive spray can paste the foam to the wall?
Hi，I have glue here to stick foam to the wall.please contact me WhatsApp:+8613829142837 Email:dyqwj13@dayangsprayidea.com
i am impressed
Do you sell your product in Canada? If so, where and which stores?
We ship to Canada and around the world. We do not have a dealer in Canada, sorry.
Hi ,our company specialize in spray adhesive for 20 years,we can sell to Canada,if you need,please contact me WhatsAPP:+8613829142837 Email:dyqwj13@dayangsprayidea.com
@@SailriteDIY Amazon?
Can we also use this glue the foam on the wall?
Yes, I have used it to glue foam to wall panels that I attached to my walls. It works great!
Wow! great uplpad👍
Glad you found it helpful!
good video
I need help. To the top of one square foot of plastic I need to glue a square foot of rubber, which glue do I need to use? Should be waterproof.
Sorry, we do not have a definitive answer for this. You can test using HH-66 Vinyl Cement, it might work.
Thank you, I will try.
Hi ,our company specialize in spray adhesive for 20 years,we can sell to Canada,if you need,please contact me WhatsAPP:+8613829142837 Email:dyqwj13@dayangsprayidea.com
Is it non toxic?
I can email you the Safety Data Sheet. Just email me at ericg@sailrite.com and ask for it.
where can i buy this? im from phillippines
Sorry, I do not know.
Hi，please contact me WhatsApp:+8613829142837 Email:dyqwj13@dayangsprayidea.com
Sì possono trovare i vostri prodotti in italia? dove si possono acquistare? grazie!!!
Spediamo in tutto il mondo, mi dispiace non abbiamo distributori all'estero per questo prodotto.
Does it work on pool noodles (buoyant polyethylene) on bonding them together?
Likely video
Thanks for this, I thought I had to throw all my larger pieces of foam away!
keep it up
🖒😊
*me just wanting to make some gotdam cosplay platforms*
👍👍👍⚓⚓⚓
Zach needs to hit the gym.