How to replace Yamaha Raptor 660 Stator and starter clutch. Thank you Rose!

Поделиться
HTML-код
  • Опубликовано: 1 ноя 2024

Комментарии • 53

  • @Mauybox
    @Mauybox 2 года назад

    Great video, You actually made it clear and that helped me understand what you were doing. Thank you

    • @geezermoto7820
      @geezermoto7820  2 года назад

      I'm glad the video was of help, thank you

  • @jonmoddingjtag
    @jonmoddingjtag Месяц назад

    I have a question about a Yamaha 660 that is a 686 now.... I'm thinking about doing valve adjustments because it has a tiny bog in every gear like it wants more gas was thinking of moving washer to slowest possible setting at needle jet in carb... not sure if that will make the difference... but as for the valves with the bore am I still looking for factory spacing with feeler gauge or does it have to be different since it's technically running with more power.... that's my main question as of now... I've tried looking at forums and couldn't find anything ????

  • @matthewgscheidle4018
    @matthewgscheidle4018 Год назад +1

    My 660 was doing the same thing on the top and bogging out feeling like I need a gas when you open throttle net why I was running it it turned off completely, and now it just turns over but won’t fire that be the cause of the stater

  • @hithere474
    @hithere474 Месяц назад

    Is Your pro design air filter foam?

  • @lanceblessard8437
    @lanceblessard8437 3 года назад

    Great video i’m in the process of replacing my stater and rectifier just waiting for them to come in the mail. But my bike was running fine and I left it alone for two months went back to it and no preignition sounds and no start the bike is quiet and no lighting. I used a 12 V light tester and checked the inputs to mostly everything and getting power but nothing is lighting up And still have nothing have you ever ran across this problem? Maybe the new stater rectifier will help the problem any input?

    • @geezermoto7820
      @geezermoto7820  3 года назад

      Sounds like classic dirty switch or switches or wire connectors....we see this all the time and very much so on bikes sitting outside

    • @geezermoto7820
      @geezermoto7820  3 года назад

      Work the switches back and forth

  • @ulyssescuriel1832
    @ulyssescuriel1832 3 года назад

    Thank You Bud, this video really helped me out. Good Job!

  • @DTEpeoplesvlog
    @DTEpeoplesvlog Год назад

    On my 04 raptor 660 I redone carb and now it will only run with choke on but soon as I hit gas it dies? Any advice would be greatly appreciated

  • @juugman6648
    @juugman6648 3 года назад +1

    Very informative great vid !

  • @sawyerpitz5982
    @sawyerpitz5982 3 года назад

    I got a 03 raptor 660 and im putting in a new stator and i just wanna make sure i put it back together the right way, got any tips?

    • @geezermoto7820
      @geezermoto7820  3 года назад

      Piece of cake. Get a new stator cover gasket, oil and filter. Blue loctite the screws that hold stator on. Just take pictures, pay attention, put it in like an it came out. The cover is tuff to get off, just take your time

    • @sawyerpitz5982
      @sawyerpitz5982 3 года назад

      @@geezermoto7820 should i put oil on the stator

    • @geezermoto7820
      @geezermoto7820  3 года назад

      @@sawyerpitz5982 you will when you fill the engine with oil

  • @Kevin_Yagoonie
    @Kevin_Yagoonie Год назад

    You happen to know the torque specs on the stator cover bolts?

    • @geezermoto7820
      @geezermoto7820  Год назад +1

      About 8 ft/lbs

    • @Kevin_Yagoonie
      @Kevin_Yagoonie Год назад +1

      ​@@geezermoto7820 thank you sir 👍
      I have to replace my stator cover gasket because a slow oil leak

  • @normanolson2984
    @normanolson2984 2 года назад

    Hey I got a question with a issue I’m having with my 03 raptor 660 can I send you a video to see what you think?

    • @geezermoto7820
      @geezermoto7820  2 года назад

      Cutting out bad when you apply throttle?

  • @Rafael.0083
    @Rafael.0083 3 года назад

    I have a 2003 Yamaha Raptor 686 all it does is kill the batteries i don’t know what’s wrong with it also where did you buy the stator

    • @geezermoto7820
      @geezermoto7820  3 года назад +1

      With it running you should get about 14 volts at your battery.
      ,,. You can get a stator on ebay, or we could probably ship you one from here at our shop

    • @Rafael.0083
      @Rafael.0083 3 года назад

      @@geezermoto7820 you think you can ship me one from your shop

    • @geezermoto7820
      @geezermoto7820  3 года назад

      @@Rafael.0083 hawgsnrice@gmail.com. Email me your zip code, I'll send a price quote

    • @Rafael.0083
      @Rafael.0083 3 года назад

      @@geezermoto7820 ok

  • @beatbeat4378
    @beatbeat4378 3 года назад

    I have a 04 660r that only gets a single spark the moment I let off the start button. If I unplug the rectifier I get a great spark. Do you think it’s my stator? Any tips to figure this out?

  • @Kevin_Yagoonie
    @Kevin_Yagoonie Год назад

    8:28 what does that dowel pin do? What's it's purpose? I'm missing mine

    • @geezermoto7820
      @geezermoto7820  Год назад

      Dowels hold cases where they are supposed to be and sometimes are oil passages

    • @Kevin_Yagoonie
      @Kevin_Yagoonie Год назад

      @@geezermoto7820 yes the 3 dowels (2 with O-Ring) but I'm taking about that 1 that you mention on time 8:28

  • @davidalvarez2016
    @davidalvarez2016 Год назад

    My 2004 660r idle fine but shut off at full throttle..

  • @ogjook8142
    @ogjook8142 3 года назад

    Hey I was wondering wat would you charge to do a rebuild on my 660 juz wanna go back shock

    • @geezermoto7820
      @geezermoto7820  3 года назад

      Entire engine with new crank, valves, piston, etc is about 2,200 usually

    • @ogjook8142
      @ogjook8142 3 года назад

      @@geezermoto7820 give me a txt 8706235315

    • @geezermoto7820
      @geezermoto7820  3 года назад

      @@ogjook8142 write to:
      hawgsnrice@gmail.com

  • @joetorre5986
    @joetorre5986 2 года назад

    What oil did you put in there when done

    • @geezermoto7820
      @geezermoto7820  2 года назад +1

      You can use 10w40 mineral based or synthetic, just be sure it's rated for use with wet clutches

    • @joetorre5986
      @joetorre5986 2 года назад

      @@geezermoto7820 10w40 synthetic you put it as motor oil .. just switched the stator on my 05 660 .. and also the colors on the plug 🔌 are coordinated different .. I need to fix that cause it won’t start right

    • @geezermoto7820
      @geezermoto7820  2 года назад

      @@joetorre5986 the 3 like wires are all the same, they are the AC current the stator creates, then the 2 smaller wires are the pickup coil or trigger

    • @joetorre5986
      @joetorre5986 2 года назад

      @@geezermoto7820 so where exactly do you put the oil @ 10w40 ?

    • @geezermoto7820
      @geezermoto7820  2 года назад

      @@joetorre5986 in the oil tank in front of the engine, alone, on the frame. Download an owners manual or just google it

  • @freddyaraujo3945
    @freddyaraujo3945 Год назад

    what part of Texas.

  • @walkernienaber824
    @walkernienaber824 3 года назад

    I had no spark, only once in a great while if I let off the starter. Changed stator, now it runs but bogs on top end... have a new rectifier as well but did not help the situation. Adjust valves? I already replaced spark plug and ignition coil

    • @geezermoto7820
      @geezermoto7820  3 года назад

      Is air filter and air filter lid on it?
      When is last time it ran good?

    • @walkernienaber824
      @walkernienaber824 3 года назад

      @@geezermoto7820 yes air filter and cover are on, last ran good about a month ago before stator took a $hit

    • @geezermoto7820
      @geezermoto7820  3 года назад

      @@walkernienaber824 carbs probably need to be cleaned if it's been sitting a month or two and disable the park brake rev switch

    • @walkernienaber824
      @walkernienaber824 3 года назад

      @@geezermoto7820 would they need to be cleaned if they were just cleaned in the end of April? The air filter didn’t look the greatest, could it be that?

    • @geezermoto7820
      @geezermoto7820  3 года назад

      @@walkernienaber824 could be air filter abd be sure to put new plugs in, they foul easily, and yes, ethanal goes bad quickly, need to blow through carbs or soak them

  • @JuanRuiz-e8e
    @JuanRuiz-e8e Месяц назад

    We're r up location