[ENG↓↓↓] 앞서 리뷰한 VS1R 케이스의 경우 제가 자주쓰는 골든레버 제작사인 AS.Indo 에서 고맙게도 보내주셨습니다. 다시 한번 감사의 말씀 전해드립니다. 상업적 광고로 리뷰를 하는건 아니고, 오랫동안 골든레버의 사용자로써 역조공 (?) 으로 받게 되었습니다. 골든레버도 많은 사랑 부탁드립니다. 밑에는 세팅 관련하여 자세한 수치 값도 적어둡니다. 참고 하실 분들은 참고하세요! 대부분의 셋업은 거의 골든레버 기본 스탠다드 버전을 샀을때의 셋업에서 샤프트만 실버로 바꾸고 나머지는 바뀐게 없습니다. (하나만 덧붙여서 말씀드리자면 저는 레버를 이것저것 써보는 스타일이 아니기때문에, 레버 관련 질문에 대해서는 뭐가 좋고 어떤지에 대해서 답해드리기가 어렵습니다ㅠㅠ 쓰는것만 써요.) At the first part of video, it contains the review of VS1R case by AS.indo. I got it as a gift for using the Golden Lever really long time. Wanna shout out to AS.indo again. Thanks again! It's not a promotional ad but just wanna show the grateful mind by gettiing this case as a gift. Please hope you guys love Golden Lever too. I'll put my current Lever Setup in detail. Please note it! (Most of setup is based on Golden Lever Standard Setup. Go to the website and please read Golden Lever Manuel which introduces GL Standard setup detailed infos.) Arcade Stick (사용스틱) : (used to be Razer Panthera Old Ver.) currently Victrix Pro FS Lever (레버) : Golden Lever Standard Setup base (Only changed Shaft) Switches (스위치) : Omron V152 1A6 Shaft (봉사이즈) : 8.5mm Silver Shaft Actuator (헤드사이즈) : 16mm Tension (고무 사이즈, 한국에서 통용되는 고무와 조금 다릅니다) : Blue 50A Buttons (버튼) : Gamer Finger Buttons 감사합니다! Thank you :)
@@VocalTK but how,😅 isn't it supposed to break or Something or go off with out a gate, Or the gate is already installed inside the LEVER. It looks circular by the way.
[ENG↓↓↓] 앞서 리뷰한 VS1R 케이스의 경우 제가 자주쓰는 골든레버 제작사인 AS.Indo 에서 고맙게도 보내주셨습니다. 다시 한번 감사의 말씀 전해드립니다.
상업적 광고로 리뷰를 하는건 아니고, 오랫동안 골든레버의 사용자로써 역조공 (?) 으로 받게 되었습니다. 골든레버도 많은 사랑 부탁드립니다.
밑에는 세팅 관련하여 자세한 수치 값도 적어둡니다. 참고 하실 분들은 참고하세요! 대부분의 셋업은 거의 골든레버 기본 스탠다드 버전을 샀을때의 셋업에서 샤프트만 실버로 바꾸고 나머지는 바뀐게 없습니다.
(하나만 덧붙여서 말씀드리자면 저는 레버를 이것저것 써보는 스타일이 아니기때문에, 레버 관련 질문에 대해서는 뭐가 좋고 어떤지에 대해서 답해드리기가 어렵습니다ㅠㅠ 쓰는것만 써요.)
At the first part of video, it contains the review of VS1R case by AS.indo. I got it as a gift for using the Golden Lever really long time. Wanna shout out to AS.indo again. Thanks again!
It's not a promotional ad but just wanna show the grateful mind by gettiing this case as a gift. Please hope you guys love Golden Lever too.
I'll put my current Lever Setup in detail. Please note it! (Most of setup is based on Golden Lever Standard Setup. Go to the website and please read Golden Lever Manuel which introduces GL Standard setup detailed infos.)
Arcade Stick (사용스틱) : (used to be Razer Panthera Old Ver.) currently Victrix Pro FS
Lever (레버) : Golden Lever Standard Setup base (Only changed Shaft)
Switches (스위치) : Omron V152 1A6
Shaft (봉사이즈) : 8.5mm Silver Shaft
Actuator (헤드사이즈) : 16mm
Tension (고무 사이즈, 한국에서 통용되는 고무와 조금 다릅니다) : Blue 50A
Buttons (버튼) : Gamer Finger Buttons
감사합니다! Thank you :)
Thank you CBM for the great review, I recently bought the Korean golden lever, I’m so happy I got 1🙂
thank you for the eng sub cbm!!!
와 진짜 깔끔하고 알기쉽네요
여기저기 돌아다니면서 격겜할일 있었으면 살까 고민할만큼 넘 멋지고 실용성있는거같아요 이동이 편하다거나 선정리거 깔끔하다거나,, 물론 집밖에서 할일이 없다~
믹스박스처럼 키보드로 배열변경할수있는건 참 끌리네요
Really nice fightstick ! I've been using the golden lever inside a Hori Rap V with the red grommet, I forgot the shaft and actuator size.
선정리 진짜 이쁘네요 저렇게 하는건 처음봅니다 ㅎㅎ
그리고 빨간색이면 40탄성인데 엄청 고탄성인데 대단하시네요!
봤더니 빨강이 아니라 파랑이더라고요... 탄성에 큰 관심이 없어서 빨강인줄 알았어요 ㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋ
이야 진짜 깔끔하시다
스틱 내부에 정리된 선은 혹시 어디서 구매할수있는건가요?
체베망님 영상보고 저도 주문을 했습니다
배송오기전에 저도 버튼등 준비중인데 혹시 후면쪽 스타트 버튼쪽 네개 들어가는부분은 30mm 인지 24mm인지 알수 있을까요?
항상 잘 보고 있습니다.
Nooo wayyy CBM gonna provide eng subs now?
Only for edited videos... I paid the money for making this video.
편집 직접 하신건가요?
일상 브이로그도 올려주세요잉
This is amazing wiring in the vs1r. How did you do it? Anyone have advice?
vs 케이스 많은 사랑달라해서 살려했더니 와 너무 어렵더라구요 포기했습니다....
진짜 존예인데 여유만 되면 사고싶네요
너무이쁘다
Muy bonito tu arcade
😍😍😍
스틱 하나씩 수집하는데 어디서 구매해야 하나요?
vs1r 개간지나네....
스틱은 눈에 들어오지도 않아요
기억에 남는건 웨이브 말곤 없네요ㅋㅋㅋ
사람인가..
예쁘다
hello i can buy arcade stick ?
구매 싸이트 알려 주세요
와 감성있는 54만원 스틱
배송 지역에서 한국이 없는데
어떻게 하나요
아마존에서 직배되던데 안되나욤?
@@cherryberrymango 어? 링크좀요
스틱 디자인은 가격과 비례하는군요
There is no GATE in this LEVER .......am I the only one whose seeing this or what?
That's the case with almost every Korean style lever.
@@VocalTK but how,😅 isn't it supposed to break or Something or go off with out a gate,
Or the gate is already installed inside the LEVER.
It looks circular by the way.
@@3li_alzadjali the grommet is what gives it tension similar to a spring in Japanese levers.. That’s the big difference between the two I believe.
@@3li_alzadjali it is indeed circular. It makes it a bit easier to do half circle/quarter circle movements with a Korean levers
@@WSY_FTW_PLOX Just add a bat top & a circular gate and your good to go🤷🏽♂️
너무 이뻐서 찾아봤는데 가격이 너무 쌔서 놀랐음..
무슨 1p 웨이브가 광대쉬네 ㅎㄷㄷㄷㄷㄷ