Sorry everyone, the giveaway for Northern Tool is going to be in a future video with the gift cards. My mistake! To offset it, I’ll ship out a gift card with some of my merch, so comment down below to win!
Dylan, those keystone wheels you took off the mustang are Keyston Rogues. Super duper rare, one piece molded magnesium chrome plated wheels. Favored by drag racers because of their very light weight. Looks like you have the complete set, clean them up and sell them to finance your next car project.
Thank you Northern Tool for getting behind and supporting Dylan. Very deserving of a sponsor like you. That is nice the Ford lives and will get a chance to cruise again.
THANK YOU NORTHERN TOOL FOR SUPPORTING DYLAN. I BEEN WATCHING HIM FOR PROBABLY 2 YEARS NOW AND THINK HE WILL BE A GREAT PARTNER FOR YOU. GREAT VIDEO DYLAN AS USUAL LOOKING FORWARD TO THE NEXT ONE.
This car sure doesn't give me that "Reunite on ice, that's nice" feeling...but it's still a 70 351W Mustang! My mom had a 70 Mach 1 with a 351C and a 4 speed manual.
I was only eight years old when that model of Mustang came out but I sure do remember because I remember thinking how pretty it was, they were sure something to behold when they were new 😎😎
Thank you northern tool. For supporting a great couple of guys having fun and saving cars. Thank you Dylan for the videos, you and the rest of the gang are fun to watch.
When I have to jack up a car in a field, I like to find a piece of wood or something to put under it because as the jack goes up, the wheels sink into the dirt and the lift arm pulls forward and can slide right off of where you had it braced. With the woo, the wheels of the jack roll under the vehicle as it lifts.
I don't know how much you plan on fixing up that Mustang but for semi-permanent repairs use self tappers and secure some license plates or sheet metal to the floors and you are golden. Well you might want to wire wheel those floor pans, rust convert them before you put down new sheet metal also seam seal them and paint. You don't want Brier to fall through the floor.
Dylan, Dude, GREAT Video this week! You and Briar kept me chuckling and interested all the way through. Doesn't matter if it is a coupe or not, I have seen some in car shows that had the "Boss" stripe and somehow a rooftop spoiler similar to the MadMax (original Australian Falcon XB) movie car. Actually looked pretty cool. Keep up the good work!
I really loved this video too, Dylan. Loved all the neat stuff you did to get this '70 Mustang running. And the drive to the shop was the icing on the cake. Thanks for another good video.
Excellent video Dylan :) , Bryer :) also did super fix up temporary on this 1970 Ford Mustang and cool got up to shop to fix up ! Also well done on driving to Bryer :) and got lots experience to !
My boss has a 67 396 four speed chevelle that I’m gonna be working on with him to get back on the road. Nothing more fun than working on old muscle cars
hey y'all these are some cool 70's revivals best years for the american auto group so i have been starting taking short clips to display the parts and share on instagram and i thought the timestamp 40:46 is where to jump to for the birds and crickets thx buds happy highway ing
Love this year of mustang and always LOVE your videos Dylan!! Briar looked like he was having more fun than he should have when driving a car with no brakes no park and just drive gears lol!!
I bought a 70 Mustang Grande and a 65 Mustang at the same time many moons ago. They both ran good and i flipped them real quick. Made good profit but wish i had them now. I liked this video. Worth restoring i think.
Im glad to see other people fixing up these old coupes. Everyone has a fast back and as much as I like them, I am getting pretty burnt on seeing them all the time.
👍Good stuff. Every old FORD, Chevy, Dodge I’ve ever messed with (sitting forever) has a gazillion miles, concrete like “mud” in engine cooling system, jumped time or worse. Ya never see much of that on RUclips with these “found” cars. They always magically fire up with just a lil bit of tooling around. They’ll set the timing right where the factory wants it w/ no issues, drive em & not boil over. Simply amazing. Lol! *At any rate, I do enjoy this guys channel. He’s a pretty solid dude.
I had the 4 door Gran Torino back in 1988-89 with the 351 Windsor. It had a problem it would run great, and then every once in a while, you get back in it to go somewhere it wouldn't hit a lick.
Congratulations Dylan on the start of the Mustang. Brair is great side kick and helper. Look forward to where this project goes. Thank you for sharing. 💯👊👍
Brings back allot of memories. My first car was a 1970 mustang coupe just like that. My step dad and I rescued it from the junkyard and restored it. Shortly after I turned 16, he passed away....
At the start he told us the previous owner had rebuilt or had the trans rebuilt then never did anything with it after that. Maybe there was no fluid put into it once it was redone.
Fast forward Mustang made me smile so big... man that brought back memories had one just like it. same color inside and out and to listen to that baby run that is so sweet so gratifying. It was never a big Powerhouse 302 in it what it looks good I had it painted and Polished and in the 1970s and 80s she looked pretty cherry on Main Street every night.
Sorry everyone, the giveaway for Northern Tool is going to be in a future video with the gift cards. My mistake! To offset it, I’ll ship out a gift card with some of my merch, so comment down below to win!
Love the 70 had one myself
Sure could use it! Thanks for the honesty!
Thanks for the honesty
Love your videos Dylan
Absolutely love the content brother you guys nailed it. 😊
Dylan, those keystone wheels you took off the mustang are Keyston Rogues. Super duper rare, one piece molded magnesium chrome plated wheels. Favored by drag racers because of their very light weight. Looks like you have the complete set, clean them up and sell them to finance your next car project.
I was thinking the same thing! What an awesome find.
I saw them and thought, please keep them, and get them cleaned up.
Water is wet.
"It's the freeze plug? Can we JB Weld it?"
Gotta love it. Glad you got it working!
Looks like a fun build! Thank you Northern Tool for getting behind and supporting Dylan. Very deserving of a sponsor like you.
Thank you Northern Tool for getting behind and supporting Dylan. Very deserving of a sponsor like you.
That is nice the Ford lives and will get a chance to cruise again.
My personal opinion, probably the best looking mustang ever made.
1969 for me
just another OLE JUNKY FoMoCo.
THANK YOU NORTHERN TOOL FOR SUPPORTING DYLAN. I BEEN WATCHING HIM FOR PROBABLY 2 YEARS NOW AND THINK HE WILL BE A GREAT PARTNER FOR YOU. GREAT VIDEO DYLAN AS USUAL LOOKING FORWARD TO THE NEXT ONE.
"Thank you Northern Tool"
I've never been a fan of that body style of mustang but they are growing on me. Can't wait to see it back in the road
Thank you, Northern Tool. Always loved the 70 mustangs, I had 2 when I was younger, A six cylinder one and the other had a 351 Cleveland.
This car sure doesn't give me that "Reunite on ice, that's nice" feeling...but it's still a 70 351W Mustang! My mom had a 70 Mach 1 with a 351C and a 4 speed manual.
Thank you northern tool and dylan McCool! This channel has cars for every taste.
Thank you Northern Tool.
Great video. Love seeing a Mustang being saved. Can't wait for part 2
I was only eight years old when that model of Mustang came out but I sure do remember because I remember thinking how pretty it was, they were sure something to behold when they were new 😎😎
Still
Thank you northern tool. For supporting a great couple of guys having fun and saving cars. Thank you Dylan for the videos, you and the rest of the gang are fun to watch.
Briar’s drive was so funny. Thank you northern tool and Dylan for the great content
Looking forward to see this Mustang back on the road.
When I have to jack up a car in a field, I like to find a piece of wood or something to put under it because as the jack goes up, the wheels sink into the dirt and the lift arm pulls forward and can slide right off of where you had it braced. With the woo, the wheels of the jack roll under the vehicle as it lifts.
I think it's a Windsor. The Cleveland had very wide valve covers.
Yep Cleveland plugs are long and narrow also. Had one in my 79 F-150.
Thermostat housing on the block for a Cleveland, intake for a Windsor.
@@johnburch6927 yep definitely a windsor
A Cleveland is the size (appearance wise,) as a big block too. My dad and I shoehorned one in his '64 Fairlane, years ago.
I don't know how much you plan on fixing up that Mustang but for semi-permanent repairs use self tappers and secure some license plates or sheet metal to the floors and you are golden. Well you might want to wire wheel those floor pans, rust convert them before you put down new sheet metal also seam seal them and paint. You don't want Brier to fall through the floor.
Dylan, Dude, GREAT Video this week! You and Briar kept me chuckling and interested all the way through. Doesn't matter if it is a coupe or not, I have seen some in car shows that had the "Boss" stripe and somehow a rooftop spoiler similar to the MadMax (original Australian Falcon XB) movie car. Actually looked pretty cool. Keep up the good work!
Not really a Mustang guy but this body style is amazing. Just one of those perfect designs.
My all time favorite
Its a Grande' mustang.
Im old😅😅😅😅
Love them or hate them I guess. I think it's the most unfortunate looking front end they ever used
@dougjones9698 I actually feel like they were trying to copy the camaro that might be why I like it so much I'm a ford man so 🤫
MCCOOL!!- ALL YOUR CARS NEED TENDER LOVING CARE - AND YOU'RE THE MOPAR DOCTOR! 😊😊
He is a hack.
Can't wait for episode #2! Thank you Northern Tool!
351w is a fine engine, I built a 325hp for my ‘68 Mustang mated with a 4 speed and 4:11 gears it was fast as I needed.
Needs to fix the b balancer your going to ruin that crank shaf
@@careysavage note the past tense writing armchair fan. He probably doesn't care. Most sold it years ago...
time stamp 9:18 to 9:20 needs to be a shirt! It's perfect for every level of frustration. LOL.
I like the idea a lot! It'd be very funny xD
Thank you Northern Tool! Love the '70. Coupe or not, ya gotta love a classic Mustang.
Im mainly a Chevy guy, but you gotta love these old mustangs. Can't wait for part 2!
Good to see you Dylan hope you're doing well.... Great video...Be blessed
Working on my 1964.5 today
I been working on a 65 with a inline 6
Working on my 65 falcon today
iI'm a FORD truck guy, but i do love this body style of the mustang.. gonna be a good series of mustang videos "THANK YOU NORTHERN TOOL"
I really loved this video too, Dylan. Loved all the neat stuff you did to get this '70 Mustang running. And the drive to the shop was the icing on the cake. Thanks for another good video.
Sweet job on that Windsor she sounds really nice!
Funny this uploaded today, I just got my grandpa's 66 running today as well. Hoping to get it on the road soon
So glad for a part TWO!!!!
Just bought a 77 Tbird with a highly modified 351W (and a 5speed). Fantastic engine!
Lovely car dude!! 8 mins you uploaded and made it in time lol
Thank you Northern Tool
My first car was a '69 Mustang, this brings back some memories.
Excellent video Dylan :) , Bryer :) also did super fix up temporary on this 1970 Ford Mustang and cool got up to shop to fix up ! Also well done on driving to Bryer :) and got lots experience to !
Great upload!! Look forward to seeing this one get the mccool treatment
My boss has a 67 396 four speed chevelle that I’m gonna be working on with him to get back on the road. Nothing more fun than working on old muscle cars
Had a buddy in high school that owned a 70 Mustang. It was awesome. Thanks Dylan for the Charger carpet with my last order!
hey y'all these are some cool 70's revivals best years for the american auto group so i have been starting taking short clips to display the parts and share on instagram and i thought the timestamp 40:46 is where to jump to for the birds and crickets thx buds happy highway ing
This video brought back many good ol memories of my old mustangs and tinkering with my stepdad 😮
I’m happy to do you’re working on one you already have and 1970 mustangs are the best.
Thank you Northern Tool! I’m a Mustang fan and that one can be turned into a beast! Can’t wait to see more!
Nice job you too! You and Bry are moving along as he picks up the knowledge Dylan. I really like the '70 Mustang body style.
This was a great episode! 3 drives and no park…
Great looking 70 Mustang. I can’t wait to see where you go with it. Thank you Northern Tool.
You got to give this Mustang a "Mach-1" paint scheme and make it a one-of-a-kind notchback with the Mach-1 graphics! 😃
Thank you northern tool!
Good job bryer held your head didn't panic 😊
Love this year of mustang and always LOVE your videos Dylan!! Briar looked like he was having more fun than he should have when driving a car with no brakes no park and just drive gears lol!!
Hey Dylan thank you for the video and saving another one
Ready for episode 2 ! Thank you Northern Tool
I bought a 70 Mustang Grande and a 65 Mustang at the same time many moons ago. They both ran good and i flipped them real quick. Made good profit but wish i had them now. I liked this video. Worth restoring i think.
Old cars and trucks are so cool to get running and drive
Im glad to see other people fixing up these old coupes. Everyone has a fast back and as much as I like them, I am getting pretty burnt on seeing them all the time.
The first drive back to the shop was awesome. Great video.
👍Good stuff. Every old FORD, Chevy, Dodge I’ve ever messed with (sitting forever) has a gazillion miles, concrete like “mud” in engine cooling system, jumped time or worse. Ya never see much of that on RUclips with these “found” cars. They always magically fire up with just a lil bit of tooling around. They’ll set the timing right where the factory wants it w/ no issues, drive em & not boil over. Simply amazing. Lol!
*At any rate, I do enjoy this guys channel. He’s a pretty solid dude.
There's a tremendous amount of Upside-Potential with that Mustang.
Thank You Northern Tool - for supporting content creators like Dylan McCool.
Thats a great start to a nice ride!
As a classic Mustang fan, I'd love to see more vids with this car in it 👍👍🙏🙏
I had the 4 door Gran Torino back in 1988-89 with the 351 Windsor. It had a problem it would run great, and then every once in a while, you get back in it to go somewhere it wouldn't hit a lick.
The fitment on that rim and tire combo is spot on. Nice job getting it going.
I love this channel and so happy to see another video on the algorithm.
Love the Mustang videos. I always learn something from your content. Thanks!!!
“Thank you Northern Tool”- I’ve always loved this place.
Pretty sure that balancer is fine and you're just seeing the offset weight vs the fully circular ones ur use too.
Dylan I am looking forward to seeing the build series on this car. I love the old school cars
Thank you Northern Tool! Excited to see what you guys do with this Mustang!
Love the. Video
The Mustang body looks ok and the rust you have is very fixable, so good luck Dylan and Briar ALSO thank you, Northen tool anyways!
Cool! Fix it up and make it live again!
Thank you, Northern Tool!
Coolant system tip - drill a 1/16-inch hole in the thermostat plate to allow the system to fill more completely.
Old timer trick that I was told years ago as well.
Thank you northern tool ❤❤
DMcC that's a sweet running ol ford mustang 351W are great platforms to have that ol girl will make a sweet car to have keep
Congratulations Dylan on the start of the Mustang. Brair is great side kick and helper. Look forward to where this project goes. Thank you for sharing.
💯👊👍
Nice to see u got it running!! "Thank you Northern Tool"
I love those wheels!!! Cragars????
Thank you Dylan McCool! And Northern Tool!
The battery tray goes to prove if you can't weld good then weld a lot. Lol
I was literally looking for a video from you last night
also
KICK ASS CAR
Brings back allot of memories. My first car was a 1970 mustang coupe just like that. My step dad and I rescued it from the junkyard and restored it. Shortly after I turned 16, he passed away....
well, it has the telltale thermostat housing of Windsor.
It also looks considerably water than it’s smaller Cousin, the 302.
Looks like it’s a 351W.
At the start he told us the previous owner had rebuilt or had the trans rebuilt then never did anything with it after that. Maybe there was no fluid put into it once it was redone.
Thank you Northern Tool! Can’t wait to see what happens with this Mustang!
I’m looking forward to part 2
It is a 351 Windsor. The clevelands had almost hemispheric heads with a much larger valve cover
Thank you Northern Tools for getting Dylan and new Air Compressor!!
I love that rear end! Thanks northern tool! I never wine anything!
My first car was a 70 Stang !!
And I ended up swapping out the 302 for a 351 Windsor, great motor.
Cool Mustang! I gotta 68 Fastback.
I bought a 70 coupe last year that also needs a ton of work.. looking forward to these videos!
Can’t wait for the next episode!! Thank you Northern Tool!
Love the content as always. Did you have a an issue with your filming equipment for this video, the whole thing felt really wobbly.
The 1970 is a prime year ! Ford nailed it
Fast forward Mustang made me smile so big... man that brought back memories had one just like it. same color inside and out and to listen to that baby run that is so sweet so gratifying. It was never a big Powerhouse 302 in it what it looks good I had it painted and Polished and in the 1970s and 80s she looked pretty cherry on Main Street every night.
Thank you Northern Tool. 😊
“ Thank You Northern Tool” great video and a great car to give a second chance to.
Thank you northern tool 😊
Fords are a thing of beauty. Best vehicles ever made.