FIRST START? Porsche 911 Carrera M96 after complete rebuild.....
HTML-код
- Опубликовано: 10 июл 2024
- It's a simple question, I was really hoping for a simple answer......
FIRST START? Porsche 911 Carrera M96 after complete rebuild..... (EPISODE 52)
See how this all started HERE 👍 - • PORSCHE 996 Carrera DI...
WEBSITE
www.maninagarage.com/
MEMBERSHIP
Join this channel to get access to perks: / @maninagarage
AMAZON STORE
www.amazon.com/shop/maninagarage
PATREON
/ maninagarage
#Porsche911 #enginerebuild #996carrera
0:00 Intro
0:30 How to install a Porsche Air Conditioning Compressor
5:00 How to install a Porsche Serpentine Belt
6:30 How to install a Porsche Power Steering Reservoir
7:33 How to connect a Porsche Fuel Tank Vent Line
7:40 How to connect a Porsche Brake Boost Vacuum Line
7:59 How To Install Porsche Power Steering Line Clips
8:25 How to connect a Porsche Engine Wiring Harness
8:45 How to install a Porsche B+ Junction Box
9:10 How to connect a Porsche Ground Strap
9:30 How to connect a Porsche Back up Light Switch
9:47 How to connect Porsche Fuel Lines
10:11 How to connect a Porsche Crankcase Breather Hose
10:30 How to Connect a Porsche Oil Cooler / Heat Exchanger Hose
10:55 How to connect a Porsche Coolant System
11:43 How to Install Porsche Catalytic Converters
15:51 How to Connect Porsche Oxygen O2 Sensors
16:30 Hot to install Fabspeed Mufflers
17:01 Smog Pump
17:28 Air Box Installation
18:37 What Engine Fluid should you use in your Porsche 911?
18:56 How to fill the Porsche Coolant System
19:45 How to fill the Porsche Engine Oil
20:11 How to fill the Porche Power Steering Reservoir
20:40 How to Pull the Porsche Fuel Pump Relay
21:31 How to replace a Porsche Battery
23:17 Porsche 911 First Start (NO FUEL)
23:17 Porsche M96 First Start (FUEL) 
Авто/Мото
You've done service to the entire 996 community with such great documentation. Thank you!
Thank you for taking the time to comment Justin 🙌 when researching the various aspects of this project I really began to feel for the next poor bastard that might have to figure out this minefield 😳 if a few more people get to have some fun with their friends and family in these cars AND sleep at night, it’s worth it. I really feel that this was a group effort. MANY of the solutions to the many problems came from generous viewers. It’s difficult to truly convey how amazing it has been to be at the receiving end of all this support. Regardless of anything to do with fancy cars, this experience has reassured me that earthlings are inherently good and generous beings. Thank you for watching 🤘😎
This has been the most thorough and detailed engine experience I've ever seen, and I'm an engine builder. You've also made it a pleasure to to watch. Thank you. I look forward to seeing you enjoy the driving bits.
The driving bits are coming very soon, thank you for watching 🤘😎
So proud of you and the fact we all followed this journey. Also proud to be a subscriber. This series has been an asset to us Porsche folks since inception. Bravo.
Thank you NATE!!! 🙌 Now if only I could find a way to keep up on the comments section 😅 Thank you for being an OG 🤘😎
Massive congratulations MIAG. Truly impressed with the way you have tackled this rebuild - you should be very proud as this is one of the most complex engines to perform a rebuild upon. Great work and happy new year.
Great work! You are Superman of garage! Happy New Year!
Thank you guys! Sorry it took me a while to get to this comment. I really appreciate you watching 🤘😎
I’ve had the pleasure of being on this ride since you had only a dozen or so videos up and it coincided with my research into purchasing my first 911 from this controversial generation. Since those early beginnings I have managed to get myself behind the wheel of one since August but will forever be grateful to you for creating not just entertaining but extremely educational content that has build my confidence in my purchase and future work will be performing on my own car. Congratulations on the first start, Happy new year and looking forward to future videos and maybe even a PCA meetup in a few years when I’ll drive mine down to your warmer climate. Cheers from another optimistic fellow earthling!
Hello Cristian, I really appreciate you being a part of this 🙌 These thing are scary until you know about them, knowledge is power ✊ There is a PCA cruise + Cars & Coffee event in San Diego next weekend, it might be worth joining just for that event. If you are attending a PCA event in San Diego message me on Instagram. Thank you for watching 🤘😎 ruclips.net/video/FYkdzugiYlw/видео.html
Huge congrats on this big step. We've all been there with the temperature sensor grommet. When mounting the exhaust headers you can screw one or two studs in (M8 bolts with heads cut off will work) for easier alignment. Looking forward to seeing you on the road.
That is good advice, it's unexpected things like lining up that bloody exhaust that can keep you up till midnight 🤣😂. This week is the horror of the Transmission.......... Thank you for watching 🤘😎 ruclips.net/video/FYkdzugiYlw/видео.html
I have to admit as was very nervous as you went through the final checklist at start up time. You did great. Consider allowing the computer to reset. Simple procedure. Key on, meet ambient conditions, wait 90 seconds and then start. There is a detailed write up on the Renn forum. You have provided the best content on this subject when viewed by all technical, production and entertainment categories. Well done.
Aha! That is news to me, thank you Keith, I shall research. Thank you for watching 🤘😎
Great result, Finn! My hat's off to you.
Thank you for taking us along on this experience!
And a happy New Year, of course.
Thank you for being an important part of this journey Bernard! Happy New Year 🍻
BRAVO! It Lives! For those of us owning a 996 (or 986) and DIY'ers your series will be so valuable. With these cars it seems just a matter of time as sooner or later we will need to either write big checks and get the work done or write medium sized checks to buy the parts and do the work ourselves. Looking forward to the first drive.
The second first drive is coming soon! Thank you for watching 🤘😎
Your channel is mad under appreciated! Should have 100k +subs
Funny, Friendly, well presented and informative!
Thank you for watching Michael 🤘😎 We are just close to breaking 3k subs 🥳
The Family have now had to sit through this on New Years Eve 😂 Fantastic news that it runs! I would've been tempted to give it a few blips of throttle to see if it cleared 😁
My apologies to your family 😁 It was just a vacuum leak, Thank you for watching 🤘😎
Its uncanny how much of the 986 is just like the 996. Your videos were helpful as I was doing a full rebuild of a Boxster S at the same time. Looking forward to seeing you get this on the road.
Aha! It is great to hear that from someone who has been in the bowels of a 986. Glad it helped 🙌 Thank you for watching 🤘😎
Excellent series Fin. A tip I have for lining up unwieldy gaskets with bolt holes is to use a tapered punch to align the bolt hole and gasket then thread in the nut. Your series is inspiring me to buy a 911 with a problematic engine and rebuilding.
That is a very good tip Daniel 🙌 are you talking about one of these amzn.to/3Qq8ONo
Please get yourself a Porsche, then I can ask you how to fix things 😅 Thank you for watching 🤘😎
Congratulations! Always a very satisfying moment when a rebuilt motor fires up (without blowing up!), even more so for such a difficult first time project. And the best thing is that while you've been doing it, the 996 has finally gained respect (hence value) significantly so your investment of time and money should be easily recouped when/if you move it on.
Once the engine is confirmed as good, are you going to continue on and fix up the rest of the car? That steering wheel makes me wince! :)
Well done on the channel by the way, the episodes are informative, entertaining, funny, and extremely well produced. Do you have prior experience with this sort of thing or are you just an all round clever clogs who can turn his hand to anything and do it well?
Fantastic result Finn, well done! It's an amazing feeling getting a non-running machine back to "life" and I'm sure, more so in your case, never having worked on one before. Excellent work and I'm sure your videos will help numerous 996 owners for years to come. Thank you for such great content, and happy new year!
Howdy Francesco, I really appreciate you taking the time to comment 🙌 . IT LIVES!!🧟♂️ Thank you for watching 🤘😎
Woo hoo!!! Like I always tell my students in my last lecture before the final exam: “congratulations for making it this far!”
It was so fun I had to do it twice! The second first start is coming soon 😅. Thank you for watching 🤘😎
Make sure you bleed the cooling System properly , it has to be done under vacuum if You haven‘t acces to a vacuum device then Go to your local Porsche dealer and let them do the job , make sure to NOT over heat the Engine.
Nice Job, I‘ve bought a M96 engine with crankshaft problems for small Money and I‘m going to do the same except my engine gets Carillo rods and Hartech cylinders !!
That is good advice Sir! A vacuum device is on This weeks shopping list. Good luck with your “Fancy Pants” M96 build 🍀
Second this. Not sure if your compressor will be strong enough but Amazon sells kits to do this for
@@miketdavies At it’s peak I can get 90 psi into that bubble in the garage. There may be improvisation involved. 🧨
@@ManinaGarage Hello Finn! I am the guy from Taiwan. Still here watching your videos. Congrats on the success you had. Unbelievable achievement you made. I am looking forward to your video when you vacuum bleed the cooling system as this still is a riddle for me. Happy new year! Cheers! Andreas
@@palatinaworks7251 You are one of the OG Subscribers 🙌 Thank you so much for being a part of this journey with me. 🤘😎
So well done! Seems your daughter is going to have a fun care to learn to drive with! Since she lent a hand and risked asphyxiation!
She has begun negotiations 🤣
Congratulations Finn!!!! Nothing like starting a new motor for the first time.
Thanks so much for producing these videos!
Sounds like you may have experienced this combination of thrill and terror in the past 🙌 . I need to lay in a dark room for 6-8 months 😅 . Thank you for watching 🤘😎
Less smoke than my 964 that was sitting for 2 months, so I guess you are on a better track here than I am for in near future.
Either way, happy new year and all that, can't wait to see it drive.
Thank you Reio that is encouraging to hear. Hopefully with some tweaks it will run more smoothly.
🥳 Happy New Year!
Congrats Finn! Sounds like you may probably have a vacuum or intake leak somewhere. It happened to me one time after taking off the plenum. One of the boots was not seating/sealing correctly. A liitel squirt of brake cleaner around it while the engine is running can confirm that. If the revs go up, you have a leak somewhere that area. Otherwise, the engine sounds healthy (no metal noises is always good sign, lol) Looking forward to you enjoying all your hard work. Outstanding job! Saludos!!
Well Fred, it’s funny you should say all of that. You may very well win first prize my talented friend . Unfortunately you are two weeks ahead of the class, shhhhhh…🤫 🙌
Congrats and much respect 🍾
It’s really amazing how much I’ve learned about my 996 by watching you rebuild yours.
But luckily for me there’s still plenty of work left, haha
Happy New Year!!
Thank you for being a part of this Phil 🙌 There is so much to learn on these things, it has been great to have everyone helping and sharing 🤘😎
Well done and congratulations. You’ve completed a task that many of us would not even attempt to think about. I can see one mistake you’ve forgotten to rectify though, you’ve left the steering wheel on the wrong side 😬 Go have a Sherry and a happy new year👍
He! He! Thank you Andrew, that wheel thing is going to be a pain in the butt to fix, I'll try 🤓
Really happy for you - getting the thing running again! I have mixed emotions about this. I so enjoyed your videos, I am sad to see the end coming soon, but so pleased its been a success! Kudos in the highest!
Merry greetings Sam, I agree it is weird to find out that the German Rubik’s cube in my garage is actually a mode of transport 🤯. What the hell do we do with it now Sam?? Thank you for watching 🤘😎
@@ManinaGarage DoorDash? GrubHub? Uber? Lyft? No. These occupations are much too pedestrian for a classic beauty such as this. As of yet, we have not seen very much of the car's interior or exterior. How do these aspects present themselves? Care to delve into Interior Refurbishment or Body Aerodynamics? The prospects are endless. Perhaps just drive and enjoy.🙂
Well done Finn! I feel your pain on getting to those relays! As you know I had to replace the steering lock on my 996 and getting under there was horrible. As far as the sound of your engine, it sounds like it's just in need of a heat cycle so that the rings and gaskets can settle in then it'll stop misfiring. I'm sure if you plugged in an OBD you'll see the ECU complaining of that.
So glad you took the lead on this rebuild mate. I now know how to put everything back. Your daughter is a trooper standing back there. Happy New Year!!
Howdy Yogi!, it is hard to believe that this comment was 6 months ago!! Sorry dude! The journey continues....As you are well accustomed with 😉 The day we both can justify hiring video editors with be a very good day 😅 We might get our lives back 🤣😂 Thank you for watching 🤘😎
@@ManinaGarage haha no worries mate. I’m still waiting on fuel injectors and conrods so I’m trying to get my Benz wagon working in the meantime.
@@YogisGarage 🍀 I’ll be watching 👍
Amazing Job all along your videos ! Thank you so much for Documenting all of this. It will be my turn soon enough as I found plastic parts in my oil sump ;) Cheers from France and Congratulations again !
Greetings to you in France James 🙌 Best of luck with your project 🍀 Thank you for watching 🤘😎
You get an honor badge for this lovely effort can't wait to see you drive it and hopefully see more of it
Thank you SIR! I certainly needed a good nights sleep after all the excitement! Im hoping to get it on the road this week, Fingers Crossed 🙏 Happy New Year🥳
Awesome to see it start. Congratulations!
I really appreciate that Al , Thank you for watching 🤘😎
Well done, I’m so relieved for you!
Ha HA! 🤣😂 still seems like magic! Thank you for watching 🤘😎
Yea! IT started! I knew you could do it!
I’m glad one of us knew that 😅 Thank you for watching 🤘😎
Congrats Finn! It is such a joy to follow your project. Really looking forward to follow the next steps on this journey. Happy new year🎉🎉
Great to hear Trond 🙌 Thank you for watching 🤘😎
Epic, so chuffed for you. The journey to this point has been so enjoyable to watch and for me inspirational. Thanks for sharing all your efforts... and in such a light hearted way. All the best for the New Year.
Thank you very much for watching Robert! We will be diving into the Transmission next 😳
Yesterday I couldn’t even spell mechanic today I r one. Very very good job
🤣🤣😂🤣
Happy New Year !!! and Congratulation on the engine start up!
Thanks to your help the transmission goes back in this week......🚗 ruclips.net/video/FYkdzugiYlw/видео.html
Concratulation 👏🏻😅🍾🥂🍺🍻 i recommend to use 5w40 or if u live in hot place use 5w50 which mobile has released some time ago.
Yes Sir, When it came time to fill the oil, my local stores seems to have been pillaged of my first choice. Once run in is completed I will order my dream oil IN ADVANCE!! Thank you for watching 🤘😎
Excellent Finn well done, highlighting in 2021 you came in a close third after, buying my 458 and saying hello to my new first granddaughter, at the moment for 2022 you are in the lead but it is only 0800 on the 1st. On my must buy list for this year
1 Amber
2 A third hand,
Happy new year to you
Wooooo!
Thinking on the roughness, wonder if all the oil / assembly lube fouled the plugs? In a "normal" engine that's an easy check. You know how fun it is on these guys...
🤙🤟
Hello Mike, that’s a very good point. There must be all kinds of combustible and less combustible liquid residue all through this engine. That’s why I was not overly upset with getting generic spark plugs, I figured they will be getting thrown out in 500 miles (or less 🤣)
Some have suggested old gasoline l, despite the stabil. I may drain the tank try again. Thank you for watching and supporting 🤘😎 happy new year 🍻
Oh excellent 👍 excited for this 😊
Me too!!!! 🤞
Very cool
Thank you for watching SIR 🙌
Well done and congratulations old chap 👏👏👏
Not as cool as your C4 S with a Design Tec Valvetronic Sports Exhaust! But it runs! Thank you for watching 🤘😎
Awesome! How exciting.
Thank you for watching Kyle 🤘😎 It's the transmission this week....... 🤓 ruclips.net/video/FYkdzugiYlw/видео.html
And now the student has become the master!
Is that why I feel even more clueless now?? This thing has taught me that there is ALWAYS more to learn 🤓 Thank you very much for watching Brian 🤘😎
It lives! Great job!!!
Thank you for watching 🤘😎
Great work Finn. This was a great new years day treat. Watched it while sat on the throne. I have lost the feeling in my legs now...
Ha Ha Ha HA! 🤣🤣🤣🤣🤣🤣😂😂 YEEEESS! Thank you for watching 🤘😎 (Speedy recovery 🤣)
Amazing work!! Can’t wait to see it on the road !
Thank you for watching 🤘😎
Sorry I forgot the most important thing , a Happy and Safe New Year , whithout the trouble you had last year!!
Thank you Arnold, So far so good 🙏. If only I could keep up with the comments section 😂🤣
Welldone it's been a great watch and looking forward to more videos. Thanks
Thank you for watching TOM! 🤘😎
Спасибо Вам за великолепно проделанную работу!
Это определенно была командная работа с использованием всей помощи из раздела комментариев. Думаю, мы ВСЕ многому научились 🤓. Спасибо за просмотр 🤘😎
Awesome Finn, congratulations on this key milestone 👏👏👏
Thank you Sir!
Well done mate fantastic achievement you've learned so much you should be proud of yourself
Richie!!! It is great to hear from you 🥳 I hope you had a great Christmas! You can see what I was doing…. 🤓. All the best for 2022
CONGRATS!! excellent job, I follow you since 1st video and I learn a lot off with you. Great mechanic an good videos. Thanks👍🏻👍🏻👍🏻🇪🇸 For me the best chanel in RUclips!!
Thank you Enric, I really appreciate you being along for the ride 🤘😎
Brilliant! very much looking forward to the next episode and very much looking forward to using these videos to get my late fathers Porsche running again!
I really hope it helps get your dads car on the road again 🙌 Thank you for watching 🤘😎
Very cool! Great job!
I really appreciate your feedback 🙌 Thank you for watching 🤘😎
It’s alive!.... #woo #hoo 😀
Yeeehhaaaa! 🤠 Until I broke it 😲, she will rise again (early next month 🤞) Thank you for watching 🤘😎
I haven't watched it yet but welll happy to see this video, good luck buddy.
If only I could answer comments in a timely manner!! Thank you for watching Dude!
Well done great result👍 Happy New Year to you all. 🎉🎉
HAPPY NEW YEAR William 🥳 Thank you for watching 🤘😎
Congratulations! So glad I came a long for the ride. 😁
Thank you Drop D, I really appreciate you being a part of this 🙌 I do love drop D but Drop C is Bitchin! 😉 Rock on! 🤘😎
does that box you used to lift the exhaust have a Porsche part number?
Well spotted Jim 🤣😂 That was a Porsche Clutch Slave Cylinder! Thank you for watching 🤘😎
Congrats! This has been a fun ride so far.
You are right there 🙌 Thank you for watching 🤘😎
Man she sounds great compared to where this engine started. Congrats.
Thank you sir! I promise she will sound even better in an upcoming video 😉. Thank you for watching 🤘😎
I knew it would run, also I believe it will smooth out after a bit of running time, let's hope so anyway, either way like you said, it's still a win🙌🙌👍👍🐕🐕
Congratulations all that hard work finally paying off
I think your daughter was saying wheeze, cough & gag dad! Good thing you didn't keep trying to take the nuts off of those exhaust flanges, as they love to snap off and then you need 6 studs, 6 nuts and 2 triple holed copper flange gaskets and the studs are splined too; requires heat and a punch to drive them out. Fire in the hole!
Hello Warren, thats an important heads up, you rock 🙌 I didn't want to get involved in a rusty tragedy while also trying to start the engine for the first time. I will be replacing the exhaust bolts going into the cylinder heads sooner rather than later, what you are talking about sounds like an episode or two by itself. My daughter has recovered 😂🤣 We are back in the garage this week 🥳 Thank you for watching 🤘😎
A lot of time and effort has gone into making these videos; I wish I had the patience and skill to do it myself!
There is no patience, just editing out the swear words and tantrums 🤪 Thank you for watching Michael 🤘😎
Cheers Finn! Happy New Year!
Thank you Stefan, sorry for the delay in getting back to you, the comments section is taking over my life 😅
Well done
Tony…. You Rock! Thank you for not breaking my legs in 2021, let’s go for a repeat in 2022 🙌 Happy new Year Sir 🥳
Fantastic, well done.
Thank you! 🤘😎
So cool to be at this point after all your hard work Finn! Good on you brother
Thank you Rockydog97 🙌 This week is the sleepless night called "Transmission repair" 😲 ruclips.net/video/FYkdzugiYlw/видео.html
Hey Finn, well done mate you should be super proud of the job you've done to this point. I was nervous for you so I can imagine how you were feeling when hearing it turn over for the first time. Don't have much of an answer for you re the way the engine was sounding, sure someone will have some helpful comments for you. Again well done on a really great rebuild. By the way, loved the wood pecker comment during the first start 😂😂. Look forward to your first drive
Howdy Russel, That was (and still is 😳 ) a smorgasbord of emotions 😅 . Obviously the car is still not "right" just yet. I'm pretty sure I was not expecting it to run perfectly first time, hopefully some fiddling and investigation will make the issue present itself 🤞🏻🤞🏻🤞🏻🤞🏻🤞🏻🤞🏻. Let's hope the local wildlife stay the heck out of the Tiny Garage.........Thank you for watching 🤘😎
Outstanding! Well done, Finn!!!👍👍👍
Howdy Tom! I can’t believe I’m only getting to your comment now 🤪 Much has happened since this episode, There is light at the end of the tunnel…..🤞
Another brilliant video, weel done
Howdy Michael! Thank you very much for watching 🤘😎 Progress has been made...
ruclips.net/video/njzwt6xYTXI/видео.html
Thanks for doing this! I have learned alot!
You and me both brother 🙌 The fun continues 🥳 Thank you for watching 🤘😎
Well done Finn you must be so proud of yourself, or you should be. Awesomeness
Thank you Dean 🙌 As you may know by now I re-broke it and took the engine out again, the fun continues!! Thank you for watching 🤘😎
you remembered the oil!!!😉
You may think that your comment was ignored. I assure you, it was NOT 🙌 . Thank you for watching 🤘😎
but the recommended oil is 5W40...
Hello Eugene 🙌 It turns out that the recommended oil depends not just on your engine but on your country and your climate. We talked about it in the two part oil episode, check it out ruclips.net/video/rgVfPM68voI/видео.html Thank you for watching 🤘😎
Tengo un problema con la presión de aceite no sube. Quisiera una. Ayuda xfavor
Hola, gracias por tu pregunta. Primero debo decirles que no soy mecánico, a veces parece que sé lo que estoy haciendo en estos videos, pero eso es solo una fantasía como una mala película de Hollywood 🤣😂. Sin ver tu coche es difícil aconsejarte. Recomendaría publicar su problema en un grupo de Facebook dedicado a los motores Porsche como el grupo llamado "Porsche Engine Gurus". Definitivamente controle el consumo de aceite de su automóvil, más de 1 litro por cada 1000 millas puede ser motivo de preocupación. Gracias por ver 🤘😎
I am already drinking...
🤣🤣😂😂😂 GOOD 🙌
well done you :)
I appreciate you taking the time to comment 🙌 Thank you for watching 🤘😎
@@ManinaGarage Sooooooo, what's next?
@@mikebell1961 what do you think I should do next??
Well for me personally you actually tackled the toughest part of the 996 repair list. Anything else you do to the car will look like your on holiday. But these cars always need suspension replacements and brakes. But to be honest you can’t swing a dead cat without hitting a RUclips videographer/garage mechanic who has done that already. Sooooo, how about a new project car??
And I’ll defer to the ladies on which one to pick
@@ManinaGarage Or you go in a completely different direction.... Document the process of making repairs/replacement of the key wear and tear components including a paint correction, then prepare the car for auction. And not a Trailer Park auction company like Mecum, but Barret Jackson. Document the entire process from listing the car, filling out the forms, filing fees and then all the expenses associated with what it would cost the normal everyday car guy to enroll the car, travel, hotel, meals etc. then follow thru to auction day and what the car sold for, and what the REAL market value is for a well done up daily driver 996, versus what PCA wants you to think the car is worth:) Then take those proceeds and start again. A perpetual process that would be worth watching. Besides it would keep you off the streets and out of the pub.
Cheers
De un 911 carrera
Preparados... Listos... ¡Ya! 🏎 ¡Gracias por ver, SEÑOR! 🤘😎
where are the ladies?
Will this work? ruclips.net/video/TbCcnGmcYqE/видео.html
Thank you for watching 🤘😎
WRONG OIL GRADE .. this will destroy your engine
Sounds interesting, what oil grade are you referring to and why do you think that?
@@ManinaGarage 996/986, 997/987 uses 5W40, it used to be 0W40, but Porsche now says 5W40 is fine, the wrong oil will have the wrong viscosity and not appropriate for a Lokasil coated engines and not appropriate for bearing clearances .. etc
@@MowSow Its interesting that you have that opinion, where are you getting this information? If you watch this series you will notice that there are many very experienced people who disagree with you. Thank you for watching 🤘😎