Find and Fix Vacuum leaks NOW!
HTML-код
- Опубликовано: 3 июл 2024
- Grab a spare Sock and some Baby Oil and join me in the Tiny Garage! 😲
This week we clean the MAF and make a Vacuum testing smoke machine!
"Rough Idle" is no longer a source of sleepless nights.
Find and Fix Vacuum leaks NOW! (EPISODE 55)
See how this all started HERE 👍 - • PORSCHE 996 Carrera DI...
WEBSITE
www.maninagarage.com/
MEMBERSHIP
Join this channel to get access to perks: / @maninagarage
AMAZON STORE
www.amazon.com/shop/maninagarage
PATREON
/ maninagarage
#Porsche911 #smoketesting #carmaintenance
0:00 Intro
0:12 Last Week
0:32 How to Clean the Mass Air Flow Sensor
1:30 How to Detect Vacuum Leaks with CRC Electronics / MAF Spray
2:02 How to make a DIY Smoke Testing Machine
3:45 How to find a vacuum leak with a Smoke Machine
7:36 First Bath
8:16 Outro - Авто/Мото
See how this project started 🤓 - ruclips.net/video/8T6GxOoezhs/видео.html
I have followed you now for nearly 2 years, marveling at your engine rebuild. Recently I have been chasing a nagging rough start on my '05 Boxster. I was searching for 'smoke test' and came across your vid here. l immediately locked in on your plenum-bellows leak. Watched in close, and rewound a few times. The Boxster has it all right on top of the engine, a bit easier to get at. Late last year, I had replaced my starter and removed the 4 bellows and air intake. I thought I had got it all back together. I ran out right away in the morning to check my setup. Sure enuf, the far left clamp was on the top OK, put a mirror under the clamp, it showed it was askew a bit. Looks like there was a bump. I loosened all the clamps, slid the boots around, checked, re-checked the position of the outboard boots and clamps, and tightened them. I followed with all the others and was very confident I had them all set well. It started right up with NO roughness or coughing. It settled down smoothly. Thank you for setting me down the right path! Love your channel and the details about working on Porsches!
Gosh! You had me going for a minute there 😅 Im very happy that you had a positive outcome. Any reduction in stress or loss of sleep is gold as far as I’m concerned. So many people helped me in this comments section over the years it is really awesome to hear that you found your problem and got back on the road 🙌 Thank you very much for watching 🤘😎
Like you I made my own homemade smoke machine. Rather than using socks, Baby oil and soldering iron, you can use smoke tablets that are used for testing smoke alarms to make the smoke. Same set up for the rest. Worked really well for me and less mess 🙂
That is a VERY good idea!! 🙌 Thank you for watching 🤘😎
Great job! 20 yo + pcars and vaccum leaks. Fun.
My 996 had the same problem with the sunroof button tabs broken. Had to take it apart clean it and glue it in place. Good for another 20 years i hope.
Once some of the bigger things are out of the way I will relish fixing that darn sunroof plastic 🤓. We just fixed the transmission last week ruclips.net/video/FYkdzugiYlw/видео.html
Thank you for watching 🤘😎
Nice to have the resolution be so easy. I’m going to check the check valve you taped in the video.
That was a real education. It’s obvious NOW that doing a smoke test before engine install is the way to go 🤓 Thank you for watching 🤘😎
Incredible work and commitment ! Now that everything is up and running, I’m really looking forward to hear the engine out loud !!
The engine is finally in a car that can drive on the road! 😅 Thank you very much for watching 🤘😎 Progress has been made...
ruclips.net/video/njzwt6xYTXI/видео.html
Nicely done!! Hopefully video series like this one will give more people the confidence to work on these engines themselves.
Thank you very much for watching 🤘😎 Progress has been made...
ruclips.net/video/njzwt6xYTXI/видео.html
I knew it!! The exact thing happened to me. Congrats Finn and huge thanks for the shout-out!
Just realizing that there is a whole Members comments section😅 Sorry for the delay, there is a jucy members video today!
Blown away by what an amateur (almost don’t believe it, but otherwise an even better actor 😂) can do in such a small garage with basic tools! 👍👍
Howdy Ben, if what I do for living ever comes up you will probably laugh your ass off 😲 This project has been the baptism of fire that I was looking for, I was born impatient! It’s the darn transmission this week fyi 🤓 Thank you for watching 🤘😎
you will never guess what my problem was! Where I installed a new IPD Plenum, which is from the throttle body to the intake manifolds, I did not tighten those clamps well enough. I had initially tigthened with a flat head screwdriver. But unbeknown to me, that was not good enough. When I did the retightening with a socket head and extension. then I could put many more turns in. maybe Im too old? In any event, immediately, the check engine light went away.
Thats awesome to hear, you gotta love those free fixes! 🙌 Thank you for watching 🤘😎
That smoke rig is beautiful 🍀
Howdy Tom, The "Adventures with the Car" time has finally arrived 🥳 Any suggestions on what adventures you might like to see?? I lived in Boulder Colorado soon after I moved to America, I really enjoy Colorado I just NEED the ocean in my life. What part of the world are you in? Thank you very much for watching 🤘😎 Progress has been made...
ruclips.net/video/njzwt6xYTXI/видео.html
I like the smoke tester you devised to find the vacuum leaks. Your hard work on this will has paid off and now it's time to enjoy the 911.
That smoke tester is no match for my stupidity! In case you missed it.. I broke the transmission 😲 ruclips.net/video/FYkdzugiYlw/видео.html Thank you for watching Warren 🤘😎
Victory! Can't wait to see it running after the break-in. I just spent another 1200 with FCP to, hopefully, wrap up the parts I need for Pepper. Here goes nothing! 👍✌️
Thank you very much for watching Yogi 🤘😎 Progress has been made...
ruclips.net/video/njzwt6xYTXI/видео.html
Very relieved that it runs well and all your efforts paid off! Gives me hope and a lot of useful info - thanks 👍
Thank you very much for watching 🤘😎 Progress has been made...
ruclips.net/video/njzwt6xYTXI/видео.html
Nice job! I have to do this to my car this weekend. Pretty sure I have vacuum leak as well!
Good luck Rick 🍀 This weeks video has more vacuum leak action. ruclips.net/video/fBu6JMA6yoE/видео.html
Thank you for watching 🤘😎
Thank you so much for doing this. I have a 2019 turbo s 911, I removed the plenum and installed an ipd plenum between the throttle body and the intake manifold, mine runs great, crazy more power, over 700 hp, but I’m getting cel. So I will do this test to see if there is leak.
That is really awesome to hear! 👍 Thank you for watching! 🤘😎
Excellent job Finn, you must be so proud. Can’t wait to see what’s next. In my opinion nice oem wheels would be nice🤓
Thank you Glen, Yep those wheels are detracting from the car. Visually is one thing, I know now that they also ride like beer barrels!! They are semi-functional "L.A. Bling". I have my eyes on a set of chrome oems right now. Not sure whats next...... Thank you for watching 🤘😎
@@ManinaGarage NOOOOOOOO! Chrome makes you look like a pimp from Liverpool :)
Awesome thank you for sharing everything with us! It certainly makes these cars less terrifying to own once we get to see what makes them tick.
All these tasks were scary until they were understood 😅 It has been fun to finally know the answers. Thank you very much for watching 🤘😎 Progress has been made...
ruclips.net/video/njzwt6xYTXI/видео.html
Awesome that the car is running so well, enjoy it 😀 wish my analytical skills worked as well with the odd noise that my Caterham 7 is making right now 😜 looking forward to the next video 😃
Hello David, Hopefully your Caterham 7 is back on the road 🙌 Thank you very much for watching 🤘😎 Progress has been made...
ruclips.net/video/njzwt6xYTXI/видео.html
@@ManinaGarage all sorted now thanks, and upgraded with extra horses too😁
Oh she sounds SO GOOD! Congratulations Finn. What a journey! Glad you've been out enjoying her! Mine is hiding from the snow 😐
Maybe I'll pull the engine for a quick rebuild, how hard can it be? 😛
Its just a weekend job Mike! 🙌 I'll bring my scissor lift and grab a six pack!🤘😎
Satisfying (but not too fan-service-y) season finale to an amazing first season. Hopefully the series is renewed!
Howdy Boff, Now that the car is on the road, its time to catch up on the growing monster that is the comments section 😅 Thank you very much for watching 🤘😎 Progress has been made...
ruclips.net/video/njzwt6xYTXI/видео.html
@@ManinaGarage I hope you’re enjoying driving it as much as I enjoy driving mine!
So proud man. A beautiful coastal photo too with the fruits of your labor. I told you this would be an easy fix. Now let’s fix that sunroof on camera👍🏾
Some eBay trolling should fix it, I shall video the excitement 🤓 Thank you for watching 🤘😎
Amazing! Congratulations! I’ve eagerly awaited each of your videos..what will I do now? Maybe a follow-up enumerating the costs?
Oh no don't ever do that! Not only is it always way more than you thought, the wife might see it! 😛
😂🤣😂🤣😂🤣😂🤣😂🤣😂🤣😂🤣😂🤣😂🤣😂🤣😂🤣😂🤣😂🤣😂🤣😂🤣😂🤣
That is a good point, once the car has passed smog it may be time for some math 🤓 Thank you very much for watching 🤘😎 Progress has been made...
ruclips.net/video/njzwt6xYTXI/видео.html
Finn, I wish you weren't 5,000 miles away mate! We could go for a run out together! 😃
You KNOW that would be thing 🙌
Congratulations, Finn!!!
Hello Frank from 6 months ago 😲 sorry dude! In case you missed it, there was transmission madness last week.
ruclips.net/video/FYkdzugiYlw/видео.html Thank you for watching 🤘😎
Fantastic, well done again Finn.
Thank you very much for watching Francesco🤘😎 Progress has been made...
ruclips.net/video/njzwt6xYTXI/видео.html
HUGE accomplishment - Congrats!
Sooooooorrrrrrrryyyy for the delay getting back to you on this one Joby! Perhaps?? I just found a whole new members comments section, Opps.... The learning goes on 🤓
That's awesome.
Howdy Christopher 🙌 We tackled the scary transmission last week 😱 ruclips.net/video/FYkdzugiYlw/видео.html
Thank you for watching 🤘😎
Awesome! So glad it worked out…now what do I do with this zucchini???
I'll check the manual....😅 Standby! 😂🤣
Yeeeeeeah! Well done. What a feeling when it finally works?!
Thank you for watching 🤘😎 just in case you like a calamity mixed with a train wreck, there’s this 🤓 ruclips.net/video/FYkdzugiYlw/видео.html
Damn !!!!!! Way to go. Well Vacuum leaks are usually easy to fix. So damn happy for you and it just goes to show you are one helluva a Porsche Engine Builder.
Cheers Mate !!!! Let me know what youll charge me to rebuild my 100K 996 engine :)
The vacuum system filled me with fear and confusion since day one for some reason?? I feel for all the people out there stressing that their car is dead when it's only a simple Vacuum leak. Before you trust me with your engine rebuild I will remind you that I am a musician, not a mechanic 🤓
@@ManinaGarage There is a saying in the field of Medicine " Watch one, do one, teach one" So when it comes to rebuilding engines ????
@@mikebell1961 In all seriousness, this weeks episode is talking about that kind of thing. What’s next etc. I am open to ideas.
Well I suppose you could do a recap of the actual costs and amount of time you actually spent completing this project including the jobs you had to farm out due to expertise ie; machine shops etc. The next obvious question for me….what are your long term plans for the car??
Continue upgrading and replacing worn parts?Honestly brakes, suspension and fluid changes and other maintenance in the 996 have flood the social media Market. How about you take the car to auction show us the entire process. Then buy a new project car?
308 Ferrari from a Novice mechanic perspective would be cool
Cheers
@@mikebell1961 Thats what I’m talking about in this weeks video. My lack of recovery from spine surgery is a factor in all this. Unfortunately.
Congratulations!! Can’t wait to get mine back on the road!
Hello Alex, Thank you very much for watching 🤘😎 Progress has been made...
ruclips.net/video/njzwt6xYTXI/видео.html
Sounds perfect👍🏻👍🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Waheeee! 🙌
Brilliant! So pleased you got it sorted.
Thank you sir! 🙌
Nooooooo!!! This can’t be the end of the series 😩
Howdy DropD 🙌 Thank you very much for watching 🤘😎 Progress has been made...
ruclips.net/video/njzwt6xYTXI/видео.html
Well done, enjoy it.
Thank you very much for watching 🤘😎 Progress has been made...
ruclips.net/video/njzwt6xYTXI/видео.html
Glad to see another Porsche back on the road! (Sick_987) :)
Thank you very much for watching 🤘😎 Progress has been made...
ruclips.net/video/njzwt6xYTXI/видео.html
wow, congrats on the job completed. I am celebrating with you. You really achieved something very challenging. Best wishes from Germany (not in Taiwan at the moment ) cheers Andreas
Thank you very much for watching Andreas 🤘😎 Progress has been made...
ruclips.net/video/njzwt6xYTXI/видео.html
Yay Finn! Now enjoy the fruits of all your labor.
Congratulations! Love the purrrring sound that engine!
Thank you Gray Family 5 🙌
Well done, great work and analysis sir.
Hello David 🙌 if your interested in witnessing a really stressed out middle aged man check out last week’s transmission episode ruclips.net/video/FYkdzugiYlw/видео.html
Thank you for watching 🤘😎
Great, your in business now👍👍🙌🙌
Howdy Don 🙌 Im just catching up on the comments section 😅 Thank you very much for watching 🤘😎 Progress has been made...
ruclips.net/video/njzwt6xYTXI/видео.html
@@ManinaGarage I was there allready, gave it a big thumbs up
Freaking Awesome Finn!! Congratulations!
Thank you DUDERAMA! Wishing you a kick ass weekend 🙌
Fantastic.
Thank you very much for watching 🤘😎 Progress has been made...
ruclips.net/video/njzwt6xYTXI/видео.html
absolute inspiration to all ... well done
Thank you Robert 🙌 Last weeks horror movie was about the dreaded Transmission 😱 ruclips.net/video/FYkdzugiYlw/видео.html
Well done you must be sooo pleased. What am I going to do without your engine build to watch, or have you got more to come?
I'm fresh out of broken engines right now William, weirdly they all seem to work? What do you think I should do next?? Thank you for watching 🤘😎
@@ManinaGarage I think you have to finish the journey with this one till it’s all sorted and re sprayed, then buy another broken one!
The next one will be easy now you have done this one but would present a whole host of new problems!
Great job. I have enjoyed this series!
Howdy Jaeson Flores! 🤠 Thank you for taking the time to comment 🙌 YOU Rock 🤘😎
It sounds good.
Thank you very much for watching 🤘😎 Progress has been made...
ruclips.net/video/njzwt6xYTXI/видео.html
Congratulations well done …
Thank you for watching Mixmaster Ronedee 🤘😎 Transmission made news last week ruclips.net/video/FYkdzugiYlw/видео.html
Excellent!
Thank you for watching Duderama, we tackled the transmission last week🤘😎 ruclips.net/video/FYkdzugiYlw/видео.html
change the air oil separator out, pct valve.
Thank you Billy Bob, good point. I replaced the entire AOS system with new Porsche parts. That is a job I don't want to do with the engine in the car 😅 . Thank you for watching 🤘😎
@@ManinaGarage awesomre drive till the wheels fall off.
Nice
Thank you for watching 🤘😎
🥳
🎹💃🏻👯♂️🕺🍾🥂🍹🦒🍱🎂🍭
🙏🙏🙏
🦵🦵🦵
T -minus 60 sec .. earthlings
Hello TheCj71984 from 7 months ago 😅 Thank you very much for watching 🤘😎 Progress has been made...
ruclips.net/video/njzwt6xYTXI/видео.html
thanks loads!!
Howdy James, if you liked that one, you might love this one 🙌
ruclips.net/video/TbCcnGmcYqE/видео.html
Thank you for watching 🤘😎