How to install PORSCHE 996 Bank 1 Pistons, Hopefully!
HTML-код
- Опубликовано: 1 авг 2024
- How to install PORSCHE 996 Bank 1 Pistons, Hopefully! (EPISODE 33)
The Tiny PORSCHE 996 Wrist Pin Circlips and the Vodoo that surrounds their installation, scared me....... Past tense 😅
Join me in Circlip Shangri-la 🧘🏻♂️
This work is the same or similar on Porsche 911 variants 997, 986 / Boxster
See how this all started HERE 👍 - • PORSCHE 996 Carrera DI...
WEBSITE
www.maninagarage.com/
MEMBERSHIP
Join this channel to get access to perks: / @maninagarage
AMAZON STORE
www.amazon.com/shop/maninagarage
PATREON
/ maninagarage
#cars #engine #porsche991
0:00 Introduction
0:10 Flashback
0:32 Cylinder Head Bolts (Cutting)
1:42 Zip Tie Cutting (Bank 2 Chain)
1:55 Bearing Carrier Bolts (Bank 1) T50 Torx / 22 Nm
3:10 Piston Assembly
5:33 Porsche Carrera Turbo S
6:46 Wrist Pin Circlip Installation
7:54 Piston Ring Installation GOETZE Brand
9:08 Graphogen Assembly Lube
9:27 Wrist Pin Installation
10:15 Piston Cylinder 1 Installation
10:46 Tapered Piston Ring Compressor
10:15 Connecting Rod Cap & ARP Bolt Installation
11:51 Piston Cylinder 2 Installation
13:02 Piston Cylinder 3 Installation
14:44 Outro
14:58 Bloopers
#learnonyoutube #enginerebuild #porsche911 
Авто/Мото
See how this Project Started HERE 🤓ruclips.net/video/8T6GxOoezhs/видео.html
Sweet episode!
Sweet Comment! 🏂
For a home diy job, for someone who supposedly doesn’t know what he’s doing, this is fantastic work!
Hello Ben 🙌 Thank you for watching 🤘😎 I ended up breaking it, second first start this week 🤞🏻 ruclips.net/video/URNqoNbYWEU/видео.html
Always the highlight of my week when these videos drop. I really need to get out more! Looking really good Finn! Great progress!
Hello Daron 🙌 , Just the terrifying part next 😬 . Thank you for watching 🤘😎
Love to do Bank 1. Bank 2 is another story, LOL. Pretty sure you'll do just fine. You have the best tech support available im sure. As always, 'Saludos' from Puerto Rico Finn!
Saludos! Fred! This week will be the BANK 2 challenge 🥳. It seems much less scary than it seemed just a few weeks ago. The "You Tube tech support" is a valuable resource, I feel very lucky to have so much help 🍀 Thank you for watching 🤘😎
This is like the mid-season climax of a tv series - I'm on the edge of my seat! Can't wait for "bank 2 - the hardness"...
Never seen this done before, good luck!
Howdy Mike 🤠 ! Your title "Bank 2 - The Hardness" sounds awesome 🤩 . I am very tempted to use that. I fear a more accurate title maybe "Bank 2 - The Crying" 😭 .
Thank you for watching 🤘😎
IMHO the climax of the series will be the Bank 2 episode, or maybe the 'Timing chain sync' episode, lol. Finn will do just fine I'm sure. Hell, If I was able to do it, he will too.
@@FredLarracuente You will be the first to know Fred, unfortunately, this week is a cliff hanger. 😬
@@ManinaGarage I'm concerned at no update :( I watched last vid where things didnt go... as planned. I hope all is well!
It's a b*tch of a job. There's a reason I shopped mine out!!! Good luck and godspeed, M
@@miketdavies Hello Mike 🙌 it turns out the Porsche was the easy part, I just had to fit in emergency spine surgery last week. We were just working on the engine tonight, I hope to have a video out this week. Thank you for watching 🤘😎
Another outstanding video, Finnius J. Finnegan! Learning so much, I'm not sure how much more my brain can hold!
Hello Tom, That whole Circlip thing has been keeping me up at night for months! Bank 2 is the real test 😬 . Let hope our brains don't leak from all the Bank 2 shenanigans this week. Thank you for watching 🤘😎
@@ManinaGarage You have no doubt seen it, but the "997 Dad" devoted a whole video to getting the wrist pins into bank 2. That special tool you had to buy is about to pay you back!
Good job mate, you're going to have fun putting the other 3 pistons in which that tool is especially designed for. Mick 👍👏🍻
Hello Mick 🙌 DUUUUDE! Let's hope I am mentally prepared for the whole Bank 2 Saga. Expect many bleeped out words in this weeks episode 🧘🏻♂️ . Thank you for watching 🤘😎
Looking good! Soon....soooon....
Yes sir, Just another 10 years, 8 months and 24 days 😅 . Thank you for engaging in the Saga 🤘😎
Nice one Finn, keep at it!
I really appreciate that! Thank you for watching 🤘😎
Patients goes a long way, well done
Duuuude, I did not have much patience when it came to getting piston 1 bolted to the crankshaft, I though I was going to have to admit defeat 😭 . Just the most difficult part next....... BANK TWO....Da Da Daaaaaaa! 😅 . Thank you for watching 🤘😎
Great video
Great Comment 🤓 Thank you for watching 🤘😎
Loving the videos! Having bore score issues on my cayman :( repair is happening tho. Keep up the great videos!
Hello Joe, I just subscribed to your channel, awesome videos 🙌. Are you going to go up in displacement on your Cayman rebuild? Thank you for watching 🤘😎
Good work
Eh! Tony 🙌
@@ManinaGarage Eehh Finny
Well done.
Thank you Earthling 🙌 The snow covered grill on your profile intrigues me? What kind of car is that?
@@ManinaGarage 1949 Packard.
@@su8pack13 Wicked! Thank you for letting me know 🤓
We are getting closer...to Tori and a conclusion🤣👍🏾
You need to help me figure out all the heavy things the MUST be lifted, therefore Tori MUST come back to the tiny garage, TEAM WORK! 😅
@@ManinaGarage I would love to but problem is I’m on the East Coast (Philly) and you’re in Cali..
Even I don’t reach that far🤣🤣
Correct done engineering, we accept 🤓🌸🤓 Or as German says ; perfekter Job ohne Lederhose 😅😅👍
Well, according to Google translate, "perfekter Job ohne Lederhose" translated to english is "perfect job without leather pants" 🤪 . Is this a common German Phrase??😃 Did I just learn something?? Should I get some leather pants?? 😆 Thank you for watching 🤘😎
You don’t want to be cutting and grinding in close proximity to very expensive Porsche paint as the hot metal sparks and shards of cutting disc etch the paintwork. You will see tiny rust marks in the paint then you will be getting it all machine polished out. It is also excellent at trashing the plastic coating on windscreens etc
It IS a tiny garage...😁
I hope this series ends in a nice detailing job to clay out the paint, that would be satisfying and would indicate success!
@@miketdavies or maybe you could just put a cover over it. I personally just go outside to do stuff like that as the dust will contaminate just about everything in there 👍🇬🇧
Just the thought of that in cleaning cloths fills me with fear!!!
I suggest you go back and watch episode one
@@donesper2070 I can remember it was scratched but it didn’t say it needed all new glass or did I miss that??
Next to a pristine Porsche, that would be sacrilege, agreed. This car needs a full paint job, cutting 4 bolts near it won't add to its issues. Thank you for watching 🤘😎